diff options
Diffstat (limited to 'Documentation/DocBook/media/dvb/dvbproperty.xml')
| -rw-r--r-- | Documentation/DocBook/media/dvb/dvbproperty.xml | 1680 |
1 files changed, 0 insertions, 1680 deletions
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml deleted file mode 100644 index e579ae5088ae..000000000000 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ /dev/null @@ -1,1680 +0,0 @@ -<section id="frontend-properties"> -<title>DVB Frontend properties</title> -<para>Tuning into a Digital TV physical channel and starting decoding it - requires changing a set of parameters, in order to control the - tuner, the demodulator, the Linear Low-noise Amplifier (LNA) and to set the - antenna subsystem via Satellite Equipment Control (SEC), on satellite - systems. The actual parameters are specific to each particular digital - TV standards, and may change as the digital TV specs evolves.</para> -<para>In the past, the strategy used was to have a union with the parameters - needed to tune for DVB-S, DVB-C, DVB-T and ATSC delivery systems grouped - there. The problem is that, as the second generation standards appeared, - those structs were not big enough to contain the additional parameters. - Also, the union didn't have any space left to be expanded without breaking - userspace. So, the decision was to deprecate the legacy union/struct based - approach, in favor of a properties set approach.</para> - -<para>NOTE: on Linux DVB API version 3, setting a frontend were done via - <link linkend="dvb-frontend-parameters">struct <constant>dvb_frontend_parameters</constant></link>. - This got replaced on version 5 (also called "S2API", as this API were - added originally_enabled to provide support for DVB-S2), because the old - API has a very limited support to new standards and new hardware. This - section describes the new and recommended way to set the frontend, with - suppports all digital TV delivery systems.</para> - -<para>Example: with the properties based approach, in order to set the tuner - to a DVB-C channel at 651 kHz, modulated with 256-QAM, FEC 3/4 and symbol - rate of 5.217 Mbauds, those properties should be sent to - <link linkend="FE_GET_PROPERTY"><constant>FE_SET_PROPERTY</constant></link> ioctl:</para> - <itemizedlist> - <listitem><para>&DTV-DELIVERY-SYSTEM; = SYS_DVBC_ANNEX_A</para></listitem> - <listitem><para>&DTV-FREQUENCY; = 651000000</para></listitem> - <listitem><para>&DTV-MODULATION; = QAM_256</para></listitem> - <listitem><para>&DTV-INVERSION; = INVERSION_AUTO</para></listitem> - <listitem><para>&DTV-SYMBOL-RATE; = 5217000</para></listitem> - <listitem><para>&DTV-INNER-FEC; = FEC_3_4</para></listitem> - <listitem><para>&DTV-TUNE;</para></listitem> - </itemizedlist> - -<para>The code that would do the above is:</para> -<programlisting> -#include <stdio.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <linux/dvb/frontend.h> - -static struct dtv_property props[] = { - { .cmd = DTV_DELIVERY_SYSTEM, .u.data = SYS_DVBC_ANNEX_A }, - { .cmd = DTV_FREQUENCY, .u.data = 651000000 }, - { .cmd = DTV_MODULATION, .u.data = QAM_256 }, - { .cmd = DTV_INVERSION, .u.data = INVERSION_AUTO }, - { .cmd = DTV_SYMBOL_RATE, .u.data = 5217000 }, - { .cmd = DTV_INNER_FEC, .u.data = FEC_3_4 }, - { .cmd = DTV_TUNE } -}; - -static struct dtv_properties dtv_prop = { - .num = 6, .props = props -}; - -int main(void) -{ - int fd = open("/dev/dvb/adapter0/frontend0", O_RDWR); - - if (!fd) { - perror ("open"); - return -1; - } - if (ioctl(fd, FE_SET_PROPERTY, &dtv_prop) == -1) { - perror("ioctl"); - return -1; - } - printf("Frontend set\n"); - return 0; -} -</programlisting> - -<para>NOTE: While it is possible to directly call the Kernel code like the - above example, it is strongly recommended to use - <ulink url="https://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>, - as it provides abstraction to work with the supported digital TV standards - and provides methods for usual operations like program scanning and to - read/write channel descriptor files.</para> - -<section id="dtv-stats"> -<title>struct <structname>dtv_stats</structname></title> -<programlisting> -struct dtv_stats { - __u8 scale; /* enum fecap_scale_params type */ - union { - __u64 uvalue; /* for counters and relative scales */ - __s64 svalue; /* for 1/1000 dB measures */ - }; -} __packed; -</programlisting> -</section> -<section id="dtv-fe-stats"> -<title>struct <structname>dtv_fe_stats</structname></title> -<programlisting> -#define MAX_DTV_STATS 4 - -struct dtv_fe_stats { - __u8 len; - &dtv-stats; stat[MAX_DTV_STATS]; -} __packed; -</programlisting> -</section> - -<section id="dtv-property"> -<title>struct <structname>dtv_property</structname></title> -<programlisting> -/* Reserved fields should be set to 0 */ - -struct dtv_property { - __u32 cmd; - __u32 reserved[3]; - union { - __u32 data; - &dtv-fe-stats; st; - struct { - __u8 data[32]; - __u32 len; - __u32 reserved1[3]; - void *reserved2; - } buffer; - } u; - int result; -} __attribute__ ((packed)); - -/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ -#define DTV_IOCTL_MAX_MSGS 64 -</programlisting> -</section> -<section id="dtv-properties"> -<title>struct <structname>dtv_properties</structname></title> -<programlisting> -struct dtv_properties { - __u32 num; - &dtv-property; *props; -}; -</programlisting> -</section> - -<section> - <title>Property types</title> -<para> -On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY and FE_SET_PROPERTY</link>, -the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to -get/set up to 64 properties. The actual meaning of each property is described on the next sections. -</para> - -<para>The available frontend property types are shown on the next section.</para> -</section> - -<section id="fe_property_parameters"> - <title>Digital TV property parameters</title> - <section id="DTV-UNDEFINED"> - <title><constant>DTV_UNDEFINED</constant></title> - <para>Used internally. A GET/SET operation for it won't change or return anything.</para> - </section> - <section id="DTV-TUNE"> - <title><constant>DTV_TUNE</constant></title> - <para>Interpret the cache of data, build either a traditional frontend tunerequest so we can pass validation in the <constant>FE_SET_FRONTEND</constant> ioctl.</para> - </section> - <section id="DTV-CLEAR"> - <title><constant>DTV_CLEAR</constant></title> - <para>Reset a cache of data specific to the frontend here. This does not effect hardware.</para> - </section> - <section id="DTV-FREQUENCY"> - <title><constant>DTV_FREQUENCY</constant></title> - - <para>Central frequency of the channel.</para> - - <para>Notes:</para> - <para>1)For satellite delivery systems, it is measured in kHz. - For the other ones, it is measured in Hz.</para> - <para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. - E.g. a valid frequency could be 474143 kHz. The stepping is bound to the bandwidth of - the channel which is 6MHz.</para> - - <para>3)As in ISDB-Tsb the channel consists of only one or three segments the - frequency step is 429kHz, 3*429 respectively. As for ISDB-T the - central frequency of the channel is expected.</para> - </section> - <section id="DTV-MODULATION"> - <title><constant>DTV_MODULATION</constant></title> -<para>Specifies the frontend modulation type for delivery systems that supports - more than one modulation type. The modulation can be one of the types - defined by &fe-modulation;.</para> - - -<section id="fe-modulation-t"> -<title>Modulation property</title> - -<para>Most of the digital TV standards currently offers more than one possible - modulation (sometimes called as "constellation" on some standards). This - enum contains the values used by the Kernel. Please note that not all - modulations are supported by a given standard.</para> - -<table pgwide="1" frame="none" id="fe-modulation"> - <title>enum fe_modulation</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="QPSK"><constant>QPSK</constant></entry> - <entry>QPSK modulation</entry> - </row><row> - <entry id="QAM-16"><constant>QAM_16</constant></entry> - <entry>16-QAM modulation</entry> - </row><row> - <entry id="QAM-32"><constant>QAM_32</constant></entry> - <entry>32-QAM modulation</entry> - </row><row> - <entry id="QAM-64"><constant>QAM_64</constant></entry> - <entry>64-QAM modulation</entry> - </row><row> - <entry id="QAM-128"><constant>QAM_128</constant></entry> - <entry>128-QAM modulation</entry> - </row><row> - <entry id="QAM-256"><constant>QAM_256</constant></entry> - <entry>256-QAM modulation</entry> - </row><row> - <entry id="QAM-AUTO"><constant>QAM_AUTO</constant></entry> - <entry>Autodetect QAM modulation</entry> - </row><row> - <entry id="VSB-8"><constant>VSB_8</constant></entry> - <entry>8-VSB modulation</entry> - </row><row> - <entry id="VSB-16"><constant>VSB_16</constant></entry> - <entry>16-VSB modulation</entry> - </row><row> - <entry id="PSK-8"><constant>PSK_8</constant></entry> - <entry>8-PSK modulation</entry> - </row><row> - <entry id="APSK-16"><constant>APSK_16</constant></entry> - <entry>16-APSK modulation</entry> - </row><row> - <entry id="APSK-32"><constant>APSK_32</constant></entry> - <entry>32-APSK modulation</entry> - </row><row> - <entry id="DQPSK"><constant>DQPSK</constant></entry> - <entry>DQPSK modulation</entry> - </row><row> - <entry id="QAM-4-NR"><constant>QAM_4_NR</constant></entry> - <entry>4-QAM-NR modulation</entry> - </row> - </tbody> - </tgroup> -</table> -</section> - - </section> - <section id="DTV-BANDWIDTH-HZ"> - <title><constant>DTV_BANDWIDTH_HZ</constant></title> - - <para>Bandwidth for the channel, in HZ.</para> - - <para>Possible values: - <constant>1712000</constant>, - <constant>5000000</constant>, - <constant>6000000</constant>, - <constant>7000000</constant>, - <constant>8000000</constant>, - <constant>10000000</constant>. - </para> - - <para>Notes:</para> - - <para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para> - <para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para> - <para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth - for DVB-C depends on the symbol rate</para> - <para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from - other parameters (DTV_ISDBT_SB_SEGMENT_IDX, - DTV_ISDBT_SB_SEGMENT_COUNT).</para> - <para>5) DVB-T supports 6, 7 and 8MHz.</para> - <para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para> - </section> - <section id="DTV-INVERSION"> - <title><constant>DTV_INVERSION</constant></title> - - <para>Specifies if the frontend should do spectral inversion or not.</para> - -<section id="fe-spectral-inversion-t"> -<title>enum fe_modulation: Frontend spectral inversion</title> - -<para>This parameter indicates if spectral inversion should be presumed or not. - In the automatic setting (<constant>INVERSION_AUTO</constant>) the hardware - will try to figure out the correct setting by itself. If the hardware - doesn't support, the DVB core will try to lock at the carrier first with - inversion off. If it fails, it will try to enable inversion. -</para> - -<table pgwide="1" frame="none" id="fe-spectral-inversion"> - <title>enum fe_modulation</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="INVERSION-OFF"><constant>INVERSION_OFF</constant></entry> - <entry>Don't do spectral band inversion.</entry> - </row><row> - <entry id="INVERSION-ON"><constant>INVERSION_ON</constant></entry> - <entry>Do spectral band inversion.</entry> - </row><row> - <entry id="INVERSION-AUTO"><constant>INVERSION_AUTO</constant></entry> - <entry>Autodetect spectral band inversion.</entry> - </row> - </tbody> - </tgroup> -</table> -</section> - - </section> - <section id="DTV-DISEQC-MASTER"> - <title><constant>DTV_DISEQC_MASTER</constant></title> - <para>Currently not implemented.</para> - </section> - <section id="DTV-SYMBOL-RATE"> - <title><constant>DTV_SYMBOL_RATE</constant></title> - <para>Digital TV symbol rate, in bauds (symbols/second). Used on cable standards.</para> - </section> - <section id="DTV-INNER-FEC"> - <title><constant>DTV_INNER_FEC</constant></title> - <para>Used cable/satellite transmissions. The acceptable values are: - </para> -<section id="fe-code-rate-t"> -<title>enum fe_code_rate: type of the Forward Error Correction.</title> - -<table pgwide="1" frame="none" id="fe-code-rate"> - <title>enum fe_code_rate</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="FEC-NONE"><constant>FEC_NONE</constant></entry> - <entry>No Forward Error Correction Code</entry> - </row><row> - <entry id="FEC-AUTO"><constant>FEC_AUTO</constant></entry> - <entry>Autodetect Error Correction Code</entry> - </row><row> - <entry id="FEC-1-2"><constant>FEC_1_2</constant></entry> - <entry>Forward Error Correction Code 1/2</entry> - </row><row> - <entry id="FEC-2-3"><constant>FEC_2_3</constant></entry> - <entry>Forward Error Correction Code 2/3</entry> - </row><row> - <entry id="FEC-3-4"><constant>FEC_3_4</constant></entry> - <entry>Forward Error Correction Code 3/4</entry> - </row><row> - <entry id="FEC-4-5"><constant>FEC_4_5</constant></entry> - <entry>Forward Error Correction Code 4/5</entry> - </row><row> - <entry id="FEC-5-6"><constant>FEC_5_6</constant></entry> - <entry>Forward Error Correction Code 5/6</entry> - </row><row> - <entry id="FEC-6-7"><constant>FEC_6_7</constant></entry> - <entry>Forward Error Correction Code 6/7</entry> - </row><row> - <entry id="FEC-7-8"><constant>FEC_7_8</constant></entry> - <entry>Forward Error Correction Code 7/8</entry> - </row><row> - <entry id="FEC-8-9"><constant>FEC_8_9</constant></entry> - <entry>Forward Error Correction Code 8/9</entry> - </row><row> - <entry id="FEC-9-10"><constant>FEC_9_10</constant></entry> - <entry>Forward Error Correction Code 9/10</entry> - </row><row> - <entry id="FEC-2-5"><constant>FEC_2_5</constant></entry> - <entry>Forward Error Correction Code 2/5</entry> - </row><row> - <entry id="FEC-3-5"><constant>FEC_3_5</constant></entry> - <entry>Forward Error Correction Code 3/5</entry> - </row> - </tbody> - </tgroup> -</table> -</section> - </section> - <section id="DTV-VOLTAGE"> - <title><constant>DTV_VOLTAGE</constant></title> - <para>The voltage is usually used with non-DiSEqC capable LNBs to switch - the polarzation (horizontal/vertical). When using DiSEqC epuipment this - voltage has to be switched consistently to the DiSEqC commands as - described in the DiSEqC spec.</para> - -<table pgwide="1" frame="none" id="fe-sec-voltage"> - <title id="fe-sec-voltage-t">enum fe_sec_voltage</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry align="char" id="SEC-VOLTAGE-13"><constant>SEC_VOLTAGE_13</constant></entry> - <entry align="char">Set DC voltage level to 13V</entry> - </row><row> - <entry align="char" id="SEC-VOLTAGE-18"><constant>SEC_VOLTAGE_18</constant></entry> - <entry align="char">Set DC voltage level to 18V</entry> - </row><row> - <entry align="char" id="SEC-VOLTAGE-OFF"><constant>SEC_VOLTAGE_OFF</constant></entry> - <entry align="char">Don't send any voltage to the antenna</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-TONE"> - <title><constant>DTV_TONE</constant></title> - <para>Currently not used.</para> - </section> - <section id="DTV-PILOT"> - <title><constant>DTV_PILOT</constant></title> - <para>Sets DVB-S2 pilot</para> - <section id="fe-pilot-t"> - <title>fe_pilot type</title> -<table pgwide="1" frame="none" id="fe-pilot"> - <title>enum fe_pilot</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry align="char" id="PILOT-ON"><constant>PILOT_ON</constant></entry> - <entry align="char">Pilot tones enabled</entry> - </row><row> - <entry align="char" id="PILOT-OFF"><constant>PILOT_OFF</constant></entry> - <entry align="char">Pilot tones disabled</entry> - </row><row> - <entry align="char" id="PILOT-AUTO"><constant>PILOT_AUTO</constant></entry> - <entry align="char">Autodetect pilot tones</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - </section> - <section id="DTV-ROLLOFF"> - <title><constant>DTV_ROLLOFF</constant></title> - <para>Sets DVB-S2 rolloff</para> - - <section id="fe-rolloff-t"> - <title>fe_rolloff type</title> -<table pgwide="1" frame="none" id="fe-rolloff"> - <title>enum fe_rolloff</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry align="char" id="ROLLOFF-35"><constant>ROLLOFF_35</constant></entry> - <entry align="char">Roloff factor: α=35%</entry> - </row><row> - <entry align="char" id="ROLLOFF-20"><constant>ROLLOFF_20</constant></entry> - <entry align="char">Roloff factor: α=20%</entry> - </row><row> - <entry align="char" id="ROLLOFF-25"><constant>ROLLOFF_25</constant></entry> - <entry align="char">Roloff factor: α=25%</entry> - </row><row> - <entry align="char" id="ROLLOFF-AUTO"><constant>ROLLOFF_AUTO</constant></entry> - <entry align="char">Auto-detect the roloff factor.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - </section> - <section id="DTV-DISEQC-SLAVE-REPLY"> - <title><constant>DTV_DISEQC_SLAVE_REPLY</constant></title> - <para>Currently not implemented.</para> - </section> - <section id="DTV-FE-CAPABILITY-COUNT"> - <title><constant>DTV_FE_CAPABILITY_COUNT</constant></title> - <para>Currently not implemented.</para> - </section> - <section id="DTV-FE-CAPABILITY"> - <title><constant>DTV_FE_CAPABILITY</constant></title> - <para>Currently not implemented.</para> - </section> - <section id="DTV-DELIVERY-SYSTEM"> - <title><constant>DTV_DELIVERY_SYSTEM</constant></title> - <para>Specifies the type of Delivery system</para> - <section id="fe-delivery-system-t"> - <title>fe_delivery_system type</title> - <para>Possible values: </para> - -<table pgwide="1" frame="none" id="fe-delivery-system"> - <title>enum fe_delivery_system</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="SYS-UNDEFINED"><constant>SYS_UNDEFINED</constant></entry> - <entry>Undefined standard. Generally, indicates an error</entry> - </row><row> - <entry id="SYS-DVBC-ANNEX-A"><constant>SYS_DVBC_ANNEX_A</constant></entry> - <entry>Cable TV: DVB-C following ITU-T J.83 Annex A spec</entry> - </row><row> - <entry id="SYS-DVBC-ANNEX-B"><constant>SYS_DVBC_ANNEX_B</constant></entry> - <entry>Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM)</entry> - </row><row> - <entry id="SYS-DVBC-ANNEX-C"><constant>SYS_DVBC_ANNEX_C</constant></entry> - <entry>Cable TV: DVB-C following ITU-T J.83 Annex C spec</entry> - </row><row> - <entry id="SYS-ISDBC"><constant>SYS_ISDBC</constant></entry> - <entry>Cable TV: ISDB-C (no drivers yet)</entry> - </row><row> - <entry id="SYS-DVBT"><constant>SYS_DVBT</constant></entry> - <entry>Terrestral TV: DVB-T</entry> - </row><row> - <entry id="SYS-DVBT2"><constant>SYS_DVBT2</constant></entry> - <entry>Terrestral TV: DVB-T2</entry> - </row><row> - <entry id="SYS-ISDBT"><constant>SYS_ISDBT</constant></entry> - <entry>Terrestral TV: ISDB-T</entry> - </row><row> - <entry id="SYS-ATSC"><constant>SYS_ATSC</constant></entry> - <entry>Terrestral TV: ATSC</entry> - </row><row> - <entry id="SYS-ATSCMH"><constant>SYS_ATSCMH</constant></entry> - <entry>Terrestral TV (mobile): ATSC-M/H</entry> - </row><row> - <entry id="SYS-DTMB"><constant>SYS_DTMB</constant></entry> - <entry>Terrestrial TV: DTMB</entry> - </row><row> - <entry id="SYS-DVBS"><constant>SYS_DVBS</constant></entry> - <entry>Satellite TV: DVB-S</entry> - </row><row> - <entry id="SYS-DVBS2"><constant>SYS_DVBS2</constant></entry> - <entry>Satellite TV: DVB-S2</entry> - </row><row> - <entry id="SYS-TURBO"><constant>SYS_TURBO</constant></entry> - <entry>Satellite TV: DVB-S Turbo</entry> - </row><row> - <entry id="SYS-ISDBS"><constant>SYS_ISDBS</constant></entry> - <entry>Satellite TV: ISDB-S</entry> - </row><row> - <entry id="SYS-DAB"><constant>SYS_DAB</constant></entry> - <entry>Digital audio: DAB (not fully supported)</entry> - </row><row> - <entry id="SYS-DSS"><constant>SYS_DSS</constant></entry> - <entry>Satellite TV:"DSS (not fully supported)</entry> - </row><row> - <entry id="SYS-CMMB"><constant>SYS_CMMB</constant></entry> - <entry>Terrestral TV (mobile):CMMB (not fully supported)</entry> - </row><row> - <entry id="SYS-DVBH"><constant>SYS_DVBH</constant></entry> - <entry>Terrestral TV (mobile): DVB-H (standard deprecated)</entry> - </row> - </tbody> - </tgroup> -</table> - - -</section> - </section> - <section id="DTV-ISDBT-PARTIAL-RECEPTION"> - <title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title> - - <para>If <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether - the channel is in partial reception mode or not.</para> - - <para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and - <constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para> - - <para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1' - <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel - is consisting of one segment and layer or three segments and two layers.</para> - - <para>Possible values: 0, 1, -1 (AUTO)</para> - </section> - <section id="DTV-ISDBT-SOUND-BROADCASTING"> - <title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title> - - <para>This field represents whether the other DTV_ISDBT_*-parameters are - referring to an ISDB-T and an ISDB-Tsb channel. (See also - <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para> - - <para>Possible values: 0, 1, -1 (AUTO)</para> - </section> - <section id="DTV-ISDBT-SB-SUBCHANNEL-ID"> - <title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title> - - <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para> - - <para>(Note of the author: This might not be the correct description of the - <constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical - background needed to program a device)</para> - - <para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a - set of connected ISDB-Tsb channels. In this set of channels every - channel can be received independently. The number of connected - ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum - bandwidth available.</para> - - <para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The - broadcaster has several possibilities to put those channels in the - air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8 - segments from position 1-8 to 5-13 or anything in between.</para> - - <para>The underlying layer of segments are subchannels: each segment is - consisting of several subchannels with a predefined IDs. A sub-channel - is used to help the demodulator to synchronize on the channel.</para> - - <para>An ISDB-T channel is always centered over all sub-channels. As for - the example above, in ISDB-Tsb it is no longer as simple as that.</para> - - <para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the - sub-channel ID of the segment to be demodulated.</para> - - <para>Possible values: 0 .. 41, -1 (AUTO)</para> - </section> - <section id="DTV-ISDBT-SB-SEGMENT-IDX"> - <title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title> - <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para> - <para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be - demodulated for an ISDB-Tsb channel where several of them are - transmitted in the connected manner.</para> - <para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para> - <para>Note: This value cannot be determined by an automatic channel search.</para> - </section> - <section id="DTV-ISDBT-SB-SEGMENT-COUNT"> - <title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title> - <para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para> - <para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb - channels.</para> - <para>Possible values: 1 .. 13</para> - <para>Note: This value cannot be determined by an automatic channel search.</para> - </section> - <section id="isdb-hierq-layers"> - <title><constant>DTV-ISDBT-LAYER*</constant> parameters</title> - <para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in - ISDB-T hierarchical layers can be decoded simultaneously. For that - reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders.</para> - <para>ISDB-T has 3 hierarchical layers which each can use a part of the - available segments. The total number of segments over all layers has - to 13 in ISDB-T.</para> - <para>There are 3 parameter sets, for Layers A, B and C.</para> - <section id="DTV-ISDBT-LAYER-ENABLED"> - <title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title> - <para>Hierarchical reception in ISDB-T is achieved by enabling or disabling - layers in the decoding process. Setting all bits of - <constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be - demodulated. This is the default.</para> - <para>If the channel is in the partial reception mode - (<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded - independently of the other 12 segments. In that mode layer A has to - have a <constant>SEGMENT_COUNT</constant> of 1.</para> - <para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb - according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled - accordingly.</para> - <para>Possible values: 0x1, 0x2, 0x4 (|-able)</para> - <para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para> - <para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para> - <para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para> - <para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para> - </section> - <section id="DTV-ISDBT-LAYER-FEC"> - <title><constant>DTV_ISDBT_LAYER*_FEC</constant></title> - <para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para> - </section> - <section id="DTV-ISDBT-LAYER-MODULATION"> - <title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title> - <para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para> - <para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant> - and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para> - </section> - <section id="DTV-ISDBT-LAYER-SEGMENT-COUNT"> - <title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title> - <para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para> - <para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and - <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para> - <informaltable id="isdbt-layer_seg-cnt-table"> - <tgroup cols="6"> - <tbody> - <row> - <entry>PR</entry> - <entry>SB</entry> - <entry>Layer A width</entry> - <entry>Layer B width</entry> - <entry>Layer C width</entry> - <entry>total width</entry> - </row> - <row> - <entry>0</entry> - <entry>0</entry> - <entry>1 .. 13</entry> - <entry>1 .. 13</entry> - <entry>1 .. 13</entry> - <entry>13</entry> - </row> - <row> - <entry>1</entry> - <entry>0</entry> - <entry>1</entry> - <entry>1 .. 13</entry> - <entry>1 .. 13</entry> - <entry>13</entry> - </row> - <row> - <entry>0</entry> - <entry>1</entry> - <entry>1</entry> - <entry>0</entry> - <entry>0</entry> - <entry>1</entry> - </row> - <row> - <entry>1</entry> - <entry>1</entry> - <entry>1</entry> - <entry>2</entry> - <entry>0</entry> - <entry>13</entry> - </row> - </tbody> - </tgroup> - </informaltable> - </section> - <section id="DTV-ISDBT-LAYER-TIME-INTERLEAVING"> - <title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title> - <para>Valid values: 0, 1, 2, 4, -1 (AUTO)</para> - <para>when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid.</para> - <para>Note: The real time interleaving length depends on the mode (fft-size). The values - here are referring to what can be found in the TMCC-structure, as shown in the table below.</para> - <informaltable id="isdbt-layer-interleaving-table"> - <tgroup cols="4" align="center"> - <tbody> - <row> - <entry>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</entry> - <entry>Mode 1 (2K FFT)</entry> - <entry>Mode 2 (4K FFT)</entry> - <entry>Mode 3 (8K FFT)</entry> - </row> - <row> - <entry>0</entry> - <entry>0</entry> - <entry>0</entry> - <entry>0</entry> - </row> - <row> - <entry>1</entry> - <entry>4</entry> - <entry>2</entry> - <entry>1</entry> - </row> - <row> - <entry>2</entry> - <entry>8</entry> - <entry>4</entry> - <entry>2</entry> - </row> - <row> - <entry>4</entry> - <entry>16</entry> - <entry>8</entry> - <entry>4</entry> - </row> - </tbody> - </tgroup> - </informaltable> - </section> - <section id="DTV-ATSCMH-FIC-VER"> - <title><constant>DTV_ATSCMH_FIC_VER</constant></title> - <para>Version number of the FIC (Fast Information Channel) signaling data.</para> - <para>FIC is used for relaying information to allow rapid service acquisition by the receiver.</para> - <para>Possible values: 0, 1, 2, 3, ..., 30, 31</para> - </section> - <section id="DTV-ATSCMH-PARADE-ID"> - <title><constant>DTV_ATSCMH_PARADE_ID</constant></title> - <para>Parade identification number</para> - <para>A parade is a collection of up to eight MH groups, conveying one or two ensembles.</para> - <para>Possible values: 0, 1, 2, 3, ..., 126, 127</para> - </section> - <section id="DTV-ATSCMH-NOG"> - <title><constant>DTV_ATSCMH_NOG</constant></title> - <para>Number of MH groups per MH subframe for a designated parade.</para> - <para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para> - </section> - <section id="DTV-ATSCMH-TNOG"> - <title><constant>DTV_ATSCMH_TNOG</constant></title> - <para>Total number of MH groups including all MH groups belonging to all MH parades in one MH subframe.</para> - <para>Possible values: 0, 1, 2, 3, ..., 30, 31</para> - </section> - <section id="DTV-ATSCMH-SGN"> - <title><constant>DTV_ATSCMH_SGN</constant></title> - <para>Start group number.</para> - <para>Possible values: 0, 1, 2, 3, ..., 14, 15</para> - </section> - <section id="DTV-ATSCMH-PRC"> - <title><constant>DTV_ATSCMH_PRC</constant></title> - <para>Parade repetition cycle.</para> - <para>Possible values: 1, 2, 3, 4, 5, 6, 7, 8</para> - </section> - <section id="DTV-ATSCMH-RS-FRAME-MODE"> - <title><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></title> - <para>Reed Solomon (RS) frame mode.</para> - <para>Possible values are:</para> -<table pgwide="1" frame="none" id="atscmh-rs-frame-mode"> - <title>enum atscmh_rs_frame_mode</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="ATSCMH-RSFRAME-PRI-ONLY"><constant>ATSCMH_RSFRAME_PRI_ONLY</constant></entry> - <entry>Single Frame: There is only a primary RS Frame for all - Group Regions.</entry> - </row><row> - <entry id="ATSCMH-RSFRAME-PRI-SEC"><constant>ATSCMH_RSFRAME_PRI_SEC</constant></entry> - <entry>Dual Frame: There are two separate RS Frames: Primary RS - Frame for Group Region A and B and Secondary RS Frame for Group - Region C and D.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-ATSCMH-RS-FRAME-ENSEMBLE"> - <title><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></title> - <para>Reed Solomon(RS) frame ensemble.</para> - <para>Possible values are:</para> -<table pgwide="1" frame="none" id="atscmh-rs-frame-ensemble"> - <title>enum atscmh_rs_frame_ensemble</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="ATSCMH-RSFRAME-ENS-PRI"><constant>ATSCMH_RSFRAME_ENS_PRI</constant></entry> - <entry>Primary Ensemble.</entry> - </row><row> - <entry id="ATSCMH-RSFRAME-ENS-SEC"><constant>AATSCMH_RSFRAME_PRI_SEC</constant></entry> - <entry>Secondary Ensemble.</entry> - </row><row> - <entry id="ATSCMH-RSFRAME-RES"><constant>AATSCMH_RSFRAME_RES</constant></entry> - <entry>Reserved. Shouldn't be used.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-ATSCMH-RS-CODE-MODE-PRI"> - <title><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></title> - <para>Reed Solomon (RS) code mode (primary).</para> - <para>Possible values are:</para> -<table pgwide="1" frame="none" id="atscmh-rs-code-mode"> - <title>enum atscmh_rs_code_mode</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="ATSCMH-RSCODE-211-187"><constant>ATSCMH_RSCODE_211_187</constant></entry> - <entry>Reed Solomon code (211,187).</entry> - </row><row> - <entry id="ATSCMH-RSCODE-223-187"><constant>ATSCMH_RSCODE_223_187</constant></entry> - <entry>Reed Solomon code (223,187).</entry> - </row><row> - <entry id="ATSCMH-RSCODE-235-187"><constant>ATSCMH_RSCODE_235_187</constant></entry> - <entry>Reed Solomon code (235,187).</entry> - </row><row> - <entry id="ATSCMH-RSCODE-RES"><constant>ATSCMH_RSCODE_RES</constant></entry> - <entry>Reserved. Shouldn't be used.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-ATSCMH-RS-CODE-MODE-SEC"> - <title><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></title> - <para>Reed Solomon (RS) code mode (secondary).</para> - <para>Possible values are the same as documented on - &atscmh-rs-code-mode;:</para> - </section> - <section id="DTV-ATSCMH-SCCC-BLOCK-MODE"> - <title><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></title> - <para>Series Concatenated Convolutional Code Block Mode.</para> - <para>Possible values are:</para> -<table pgwide="1" frame="none" id="atscmh-sccc-block-mode"> - <title>enum atscmh_scc_block_mode</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="ATSCMH-SCCC-BLK-SEP"><constant>ATSCMH_SCCC_BLK_SEP</constant></entry> - <entry>Separate SCCC: the SCCC outer code mode shall be set independently - for each Group Region (A, B, C, D)</entry> - </row><row> - <entry id="ATSCMH-SCCC-BLK-COMB"><constant>ATSCMH_SCCC_BLK_COMB</constant></entry> - <entry>Combined SCCC: all four Regions shall have the same SCCC outer - code mode.</entry> - </row><row> - <entry id="ATSCMH-SCCC-BLK-RES"><constant>ATSCMH_SCCC_BLK_RES</constant></entry> - <entry>Reserved. Shouldn't be used.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-ATSCMH-SCCC-CODE-MODE-A"> - <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></title> - <para>Series Concatenated Convolutional Code Rate.</para> - <para>Possible values are:</para> -<table pgwide="1" frame="none" id="atscmh-sccc-code-mode"> - <title>enum atscmh_sccc_code_mode</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="ATSCMH-SCCC-CODE-HLF"><constant>ATSCMH_SCCC_CODE_HLF</constant></entry> - <entry>The outer code rate of a SCCC Block is 1/2 rate.</entry> - </row><row> - <entry id="ATSCMH-SCCC-CODE-QTR"><constant>ATSCMH_SCCC_CODE_QTR</constant></entry> - <entry>The outer code rate of a SCCC Block is 1/4 rate.</entry> - </row><row> - <entry id="ATSCMH-SCCC-CODE-RES"><constant>ATSCMH_SCCC_CODE_RES</constant></entry> - <entry>to be documented.</entry> - </row> - </tbody> - </tgroup> -</table> - </section> - <section id="DTV-ATSCMH-SCCC-CODE-MODE-B"> - <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></title> - <para>Series Concatenated Convolutional Code Rate.</para> - <para>Possible values are the same as documented on - &atscmh-sccc-code-mode;.</para> - </section> - <section id="DTV-ATSCMH-SCCC-CODE-MODE-C"> - <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></title> - <para>Series Concatenated Convolutional Code Rate.</para> - <para>Possible values are the same as documented on - &atscmh-sccc-code-mode;.</para> - </section> - <section id="DTV-ATSCMH-SCCC-CODE-MODE-D"> - <title><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></title> - <para>Series Concatenated Convolutional Code Rate.</para> - <para>Possible values are the same as documented on - &atscmh-sccc-code-mode;.</para> - </section> - </section> - <section id="DTV-API-VERSION"> - <title><constant>DTV_API_VERSION</constant></title> - <para>Returns the major/minor version of the DVB API</para> - </section> - <section id="DTV-CODE-RATE-HP"> - <title><constant>DTV_CODE_RATE_HP</constant></title> - <para>Used on terrestrial transmissions. The acceptable values are - the ones described at &fe-transmit-mode-t;. - </para> - </section> - <section id="DTV-CODE-RATE-LP"> - <title><constant>DTV_CODE_RATE_LP</constant></title> - <para>Used on terrestrial transmissions. The acceptable values are - the ones described at &fe-transmit-mode-t;. - </para> - - </section> - - <section id="DTV-GUARD-INTERVAL"> - <title><constant>DTV_GUARD_INTERVAL</constant></title> - - <para>Possible values are:</para> - -<section id="fe-guard-interval-t"> -<title>Modulation guard interval</title> - -<table pgwide="1" frame="none" id="fe-guard-interval"> - <title>enum fe_guard_interval</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="GUARD-INTERVAL-AUTO"><constant>GUARD_INTERVAL_AUTO</constant></entry> - <entry>Autodetect the guard interval</entry> - </row><row> - <entry id="GUARD-INTERVAL-1-128"><constant>GUARD_INTERVAL_1_128</constant></entry> - <entry>Guard interval 1/128</entry> - </row><row> - <entry id="GUARD-INTERVAL-1-32"><constant>GUARD_INTERVAL_1_32</constant></entry> - <entry>Guard interval 1/32</entry> - </row><row> - <entry id="GUARD-INTERVAL-1-16"><constant>GUARD_INTERVAL_1_16</constant></entry> - <entry>Guard interval 1/16</entry> - </row><row> - <entry id="GUARD-INTERVAL-1-8"><constant>GUARD_INTERVAL_1_8</constant></entry> - <entry>Guard interval 1/8</entry> - </row><row> - <entry id="GUARD-INTERVAL-1-4"><constant>GUARD_INTERVAL_1_4</constant></entry> - <entry>Guard interval 1/4</entry> - </row><row> - <entry id="GUARD-INTERVAL-19-128"><constant>GUARD_INTERVAL_19_128</constant></entry> - <entry>Guard interval 19/128</entry> - </row><row> - <entry id="GUARD-INTERVAL-19-256"><constant>GUARD_INTERVAL_19_256</constant></entry> - <entry>Guard interval 19/256</entry> - </row><row> - <entry id="GUARD-INTERVAL-PN420"><constant>GUARD_INTERVAL_PN420</constant></entry> - <entry>PN length 420 (1/4)</entry> - </row><row> - <entry id="GUARD-INTERVAL-PN595"><constant>GUARD_INTERVAL_PN595</constant></entry> - <entry>PN length 595 (1/6)</entry> - </row><row> - <entry id="GUARD-INTERVAL-PN945"><constant>GUARD_INTERVAL_PN945</constant></entry> - <entry>PN length 945 (1/9)</entry> - </row> - </tbody> - </tgroup> -</table> - - <para>Notes:</para> - <para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will - try to find the correct guard interval (if capable) and will use TMCC to fill - in the missing parameters.</para> - <para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para> - <para>3) DTMB specifies PN420, PN595 and PN945.</para> -</section> - </section> - <section id="DTV-TRANSMISSION-MODE"> - <title><constant>DTV_TRANSMISSION_MODE</constant></title> - - <para>Specifies the number of carriers used by the standard. - This is used only on OFTM-based standards, e. g. - DVB-T/T2, ISDB-T, DTMB</para> - -<section id="fe-transmit-mode-t"> -<title>enum fe_transmit_mode: Number of carriers per channel</title> - -<table pgwide="1" frame="none" id="fe-transmit-mode"> - <title>enum fe_transmit_mode</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="TRANSMISSION-MODE-AUTO"><constant>TRANSMISSION_MODE_AUTO</constant></entry> - <entry>Autodetect transmission mode. The hardware will try to find - the correct FFT-size (if capable) to fill in the missing - parameters.</entry> - </row><row> - <entry id="TRANSMISSION-MODE-1K"><constant>TRANSMISSION_MODE_1K</constant></entry> - <entry>Transmission mode 1K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-2K"><constant>TRANSMISSION_MODE_2K</constant></entry> - <entry>Transmission mode 2K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-8K"><constant>TRANSMISSION_MODE_8K</constant></entry> - <entry>Transmission mode 8K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-4K"><constant>TRANSMISSION_MODE_4K</constant></entry> - <entry>Transmission mode 4K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-16K"><constant>TRANSMISSION_MODE_16K</constant></entry> - <entry>Transmission mode 16K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-32K"><constant>TRANSMISSION_MODE_32K</constant></entry> - <entry>Transmission mode 32K</entry> - </row><row> - <entry id="TRANSMISSION-MODE-C1"><constant>TRANSMISSION_MODE_C1</constant></entry> - <entry>Single Carrier (C=1) transmission mode (DTMB)</entry> - </row><row> - <entry id="TRANSMISSION-MODE-C3780"><constant>TRANSMISSION_MODE_C3780</constant></entry> - <entry>Multi Carrier (C=3780) transmission mode (DTMB)</entry> - </row> - </tbody> - </tgroup> -</table> - - - <para>Notes:</para> - <para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called - 'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para> - - <para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the - hardware will try to find the correct FFT-size (if capable) and will - use TMCC to fill in the missing parameters.</para> - <para>3) DVB-T specifies 2K and 8K as valid sizes.</para> - <para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para> - <para>5) DTMB specifies C1 and C3780.</para> -</section> - </section> - <section id="DTV-HIERARCHY"> - <title><constant>DTV_HIERARCHY</constant></title> - <para>Frontend hierarchy</para> - - -<section id="fe-hierarchy-t"> -<title>Frontend hierarchy</title> - -<table pgwide="1" frame="none" id="fe-hierarchy"> - <title>enum fe_hierarchy</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="HIERARCHY-NONE"><constant>HIERARCHY_NONE</constant></entry> - <entry>No hierarchy</entry> - </row><row> - <entry id="HIERARCHY-AUTO"><constant>HIERARCHY_AUTO</constant></entry> - <entry>Autodetect hierarchy (if supported)</entry> - </row><row> - <entry id="HIERARCHY-1"><constant>HIERARCHY_1</constant></entry> - <entry>Hierarchy 1</entry> - </row><row> - <entry id="HIERARCHY-2"><constant>HIERARCHY_2</constant></entry> - <entry>Hierarchy 2</entry> - </row><row> - <entry id="HIERARCHY-4"><constant>HIERARCHY_4</constant></entry> - <entry>Hierarchy 4</entry> - </row> - </tbody> - </tgroup> -</table> -</section> - - </section> - <section id="DTV-STREAM-ID"> - <title><constant>DTV_STREAM_ID</constant></title> - <para>DVB-S2, DVB-T2 and ISDB-S support the transmission of several - streams on a single transport stream. - This property enables the DVB driver to handle substream filtering, - when supported by the hardware. - By default, substream filtering is disabled. - </para><para> - For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. - </para><para> - For ISDB, the valid substream id range is from 1 to 65535. - </para><para> - To disable it, you should use the special macro NO_STREAM_ID_FILTER. - </para><para> - Note: any value outside the id range also disables filtering. - </para> - </section> - <section id="DTV-DVBT2-PLP-ID-LEGACY"> - <title><constant>DTV_DVBT2_PLP_ID_LEGACY</constant></title> - <para>Obsolete, replaced with DTV_STREAM_ID.</para> - </section> - <section id="DTV-ENUM-DELSYS"> - <title><constant>DTV_ENUM_DELSYS</constant></title> - <para>A Multi standard frontend needs to advertise the delivery systems provided. - Applications need to enumerate the provided delivery systems, before using - any other operation with the frontend. Prior to it's introduction, - FE_GET_INFO was used to determine a frontend type. A frontend which - provides more than a single delivery system, FE_GET_INFO doesn't help much. - Applications which intends to use a multistandard frontend must enumerate - the delivery systems associated with it, rather than trying to use - FE_GET_INFO. In the case of a legacy frontend, the result is just the same - as with FE_GET_INFO, but in a more structured format </para> - </section> - <section id="DTV-INTERLEAVING"> - <title><constant>DTV_INTERLEAVING</constant></title> - -<para>Time interleaving to be used. Currently, used only on DTMB.</para> - -<table pgwide="1" frame="none" id="fe-interleaving"> - <title>enum fe_interleaving</title> - <tgroup cols="2"> - &cs-def; - <thead> - <row> - <entry>ID</entry> - <entry>Description</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="INTERLEAVING-NONE"><constant>INTERLEAVING_NONE</constant></entry> - <entry>No interleaving.</entry> - </row><row> - <entry id="INTERLEAVING-AUTO"><constant>INTERLEAVING_AUTO</constant></entry> - <entry>Auto-detect interleaving.</entry> - </row><row> - <entry id="INTERLEAVING-240"><constant>INTERLEAVING_240</constant></entry> - <entry>Interleaving of 240 symbols.</entry> - </row><row> - <entry id="INTERLEAVING-720"><constant>INTERLEAVING_720</constant></entry> - <entry>Interleaving of 720 symbols.</entry> - </row> - </tbody> - </tgroup> -</table> - - </section> - <section id="DTV-LNA"> - <title><constant>DTV_LNA</constant></title> - <para>Low-noise amplifier.</para> - <para>Hardware might offer controllable LNA which can be set manually - using that parameter. Usually LNA could be found only from - terrestrial devices if at all.</para> - <para>Possible values: 0, 1, LNA_AUTO</para> - <para>0, LNA off</para> - <para>1, LNA on</para> - <para>use the special macro LNA_AUTO to set LNA auto</para> - </section> -</section> - - <section id="frontend-stat-properties"> - <title>Frontend statistics indicators</title> - <para>The values are returned via <constant>dtv_property.stat</constant>. - If the property is supported, <constant>dtv_property.stat.len</constant> is bigger than zero.</para> - <para>For most delivery systems, <constant>dtv_property.stat.len</constant> - will be 1 if the stats is supported, and the properties will - return a single value for each parameter.</para> - <para>It should be noted, however, that new OFDM delivery systems - like ISDB can use different modulation types for each group of - carriers. On such standards, up to 3 groups of statistics can be - provided, and <constant>dtv_property.stat.len</constant> is updated - to reflect the "global" metrics, plus one metric per each carrier - group (called "layer" on ISDB).</para> - <para>So, in order to be consistent with other delivery systems, the first - value at <link linkend="dtv-stats"><constant>dtv_property.stat.dtv_stats</constant></link> - array refers to the global metric. The other elements of the array - represent each layer, starting from layer A(index 1), - layer B (index 2) and so on.</para> - <para>The number of filled elements are stored at <constant>dtv_property.stat.len</constant>.</para> - <para>Each element of the <constant>dtv_property.stat.dtv_stats</constant> array consists on two elements:</para> - <itemizedlist mark='opencircle'> - <listitem><para><constant>svalue</constant> or <constant>uvalue</constant>, where - <constant>svalue</constant> is for signed values of the measure (dB measures) - and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem> - <listitem><para><constant>scale</constant> - Scale for the value. It can be:</para> - <itemizedlist mark='bullet' id="fecap-scale-params"> - <listitem id="FE-SCALE-NOT-AVAILABLE"><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem> - <listitem id="FE-SCALE-DECIBEL"><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem> - <listitem id="FE-SCALE-RELATIVE"><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem> - <listitem id="FE-SCALE-COUNTER"><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem> - </itemizedlist> - </listitem> - </itemizedlist> - <section id="DTV-STAT-SIGNAL-STRENGTH"> - <title><constant>DTV_STAT_SIGNAL_STRENGTH</constant></title> - <para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.001 dBm units, power measured in miliwatts. This value is generally negative.</para></listitem> - <listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-CNR"> - <title><constant>DTV_STAT_CNR</constant></title> - <para>Indicates the Signal to Noise ratio for the main carrier.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.001 dB units.</para></listitem> - <listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-PRE-ERROR-BIT-COUNT"> - <title><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></title> - <para>Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code).</para> - <para>This measure is taken during the same interval as <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant>.</para> - <para>In order to get the BER (Bit Error Rate) measurement, it should be divided by - <link linkend="DTV-STAT-PRE-TOTAL-BIT-COUNT"><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></link>.</para> - <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. - The frontend may reset it when a channel/transponder is tuned.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-PRE-TOTAL-BIT-COUNT"> - <title><constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant></title> - <para>Measures the amount of bits received before the inner code block, during the same period as - <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para> - <para>It should be noted that this measurement can be smaller than the total amount of bits on the transport stream, - as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para> - <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. - The frontend may reset it when a channel/transponder is tuned.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring - <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-POST-ERROR-BIT-COUNT"> - <title><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></title> - <para>Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code).</para> - <para>This measure is taken during the same interval as <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant>.</para> - <para>In order to get the BER (Bit Error Rate) measurement, it should be divided by - <link linkend="DTV-STAT-POST-TOTAL-BIT-COUNT"><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></link>.</para> - <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. - The frontend may reset it when a channel/transponder is tuned.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-POST-TOTAL-BIT-COUNT"> - <title><constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant></title> - <para>Measures the amount of bits received after the inner coding, during the same period as - <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para> - <para>It should be noted that this measurement can be smaller than the total amount of bits on the transport stream, - as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para> - <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. - The frontend may reset it when a channel/transponder is tuned.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring - <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-ERROR-BLOCK-COUNT"> - <title><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></title> - <para>Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code).</para> - <para>This measurement is monotonically increased, as the frontend gets more bit count measurements. - The frontend may reset it when a channel/transponder is tuned.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</para></listitem> - </itemizedlist> - </section> - <section id="DTV-STAT-TOTAL-BLOCK-COUNT"> - <title><constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant></title> - <para>Measures the total number of blocks received during the same period as - <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> measurement was taken.</para> - <para>It can be used to calculate the PER indicator, by dividing - <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link> - by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para> - <para>Possible scales for this metric are:</para> - <itemizedlist mark='bullet'> - <listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem> - <listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring - <link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</para></listitem> - </itemizedlist> - </section> - </section> - - <section id="frontend-property-terrestrial-systems"> - <title>Properties used on terrestrial delivery systems</title> - <section id="dvbt-params"> - <title>DVB-T delivery system</title> - <para>The following parameters are valid for DVB-T:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="dvbt2-params"> - <title>DVB-T2 delivery system</title> - <para>DVB-T2 support is currently in the early stages - of development, so expect that this section maygrow and become - more detailed with time.</para> - <para>The following parameters are valid for DVB-T2:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem> - <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="isdbt"> - <title>ISDB-T delivery system</title> - <para>This ISDB-T/ISDB-Tsb API extension should reflect all information - needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible - that some very sophisticated devices won't need certain parameters to - tune.</para> - <para>The information given here should help application writers to know how - to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para> - <para>The details given here about ISDB-T and ISDB-Tsb are just enough to - basically show the dependencies between the needed parameter values, - but surely some information is left out. For more detailed information - see the following documents:</para> - <para>ARIB STD-B31 - "Transmission System for Digital Terrestrial - Television Broadcasting" and</para> - <para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial - Television Broadcasting".</para> - <para>In order to understand the ISDB specific parameters, - one has to have some knowledge the channel structure in - ISDB-T and ISDB-Tsb. I.e. it has to be known to - the reader that an ISDB-T channel consists of 13 segments, - that it can have up to 3 layer sharing those segments, - and things like that.</para> - <para>The following parameters are valid for ISDB-T:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-SB-SUBCHANNEL-ID"><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-IDX"><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-COUNT"><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERA_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERA_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERA_TIME_INTERLEAVING</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERB_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERB_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERB_SEGMENT_COUNT</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERB_TIME_INTERLEAVING</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERC_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERC_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="atsc-params"> - <title>ATSC delivery system</title> - <para>The following parameters are valid for ATSC:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="atscmh-params"> - <title>ATSC-MH delivery system</title> - <para>The following parameters are valid for ATSC-MH:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-FIC-VER"><constant>DTV_ATSCMH_FIC_VER</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-PARADE-ID"><constant>DTV_ATSCMH_PARADE_ID</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-NOG"><constant>DTV_ATSCMH_NOG</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-TNOG"><constant>DTV_ATSCMH_TNOG</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SGN"><constant>DTV_ATSCMH_SGN</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-PRC"><constant>DTV_ATSCMH_PRC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-MODE"><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-ENSEMBLE"><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-PRI"><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-SEC"><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SCCC-BLOCK-MODE"><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-A"><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-B"><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="dtmb-params"> - <title>DTMB delivery system</title> - <para>The following parameters are valid for DTMB:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem> - <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - </section> - <section id="frontend-property-cable-systems"> - <title>Properties used on cable delivery systems</title> - <section id="dvbc-params"> - <title>DVB-C delivery system</title> - <para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para> - <para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para> - <para>The following parameters are valid for DVB-C Annex A/C:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="dvbc-annex-b-params"> - <title>DVB-C Annex B delivery system</title> - <para>The DVB-C Annex-B is only used on a few Countries like the United States.</para> - <para>The following parameters are valid for DVB-C Annex B:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - </section> - <section id="frontend-property-satellite-systems"> - <title>Properties used on satellite delivery systems</title> - <section id="dvbs-params"> - <title>DVB-S delivery system</title> - <para>The following parameters are valid for DVB-S:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - <para>Future implementations might add those two missing parameters:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem> - </itemizedlist> - </section> - <section id="dvbs2-params"> - <title>DVB-S2 delivery system</title> - <para>In addition to all parameters valid for DVB-S, DVB-S2 supports the following parameters:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem> - <listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem> - <listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem> - </itemizedlist> - <para>In addition, the <link linkend="frontend-stat-properties">DTV QoS statistics</link> are also valid.</para> - </section> - <section id="turbo-params"> - <title>Turbo code delivery system</title> - <para>In addition to all parameters valid for DVB-S, turbo code supports the following parameters:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> - </itemizedlist> - </section> - <section id="isdbs-params"> - <title>ISDB-S delivery system</title> - <para>The following parameters are valid for ISDB-S:</para> - <itemizedlist mark='opencircle'> - <listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem> - <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> - <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem> - <listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem> - </itemizedlist> - </section> - </section> -</section> |