diff options
133 files changed, 7611 insertions, 939 deletions
diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst index c9a44c98e868..1adf53dfc494 100644 --- a/Documentation/arm/microchip.rst +++ b/Documentation/arm/microchip.rst @@ -103,7 +103,7 @@ the Microchip website: http://www.microchip.com. * Datasheet - http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet_B.pdf * ARM Cortex-A5 + NEON based SoCs - sama5d4 family @@ -167,7 +167,7 @@ the Microchip website: http://www.microchip.com. * Datasheet - http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-E70-S70-V70-V71-Family-Data-Sheet-DS60001527D.pdf Linux kernel information diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt deleted file mode 100644 index eaee06b2d8f2..000000000000 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt +++ /dev/null @@ -1,41 +0,0 @@ -== Introduction== - -LLCC (Last Level Cache Controller) provides last level of cache memory in SOC, -that can be shared by multiple clients. Clients here are different cores in the -SOC, the idea is to minimize the local caches at the clients and migrate to -common pool of memory. Cache memory is divided into partitions called slices -which are assigned to clients. Clients can query the slice details, activate -and deactivate them. - -Properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-llcc" - -- reg: - Usage: required - Value Type: <prop-encoded-array> - Definition: The first element specifies the llcc base start address and - the size of the register region. The second element specifies - the llcc broadcast base address and size of the register region. - -- reg-names: - Usage: required - Value Type: <stringlist> - Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base". - -- interrupts: - Usage: required - Definition: The interrupt is associated with the llcc edac device. - It's used for llcc cache single and double bit error detection - and reporting. - -Example: - - cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; - reg-names = "llcc_base", "llcc_broadcast_base"; - interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml new file mode 100644 index 000000000000..558749065b97 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Last Level Cache Controller + +maintainers: + - Rishabh Bhatnagar <rishabhb@codeaurora.org> + - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> + +description: | + LLCC (Last Level Cache Controller) provides last level of cache memory in SoC, + that can be shared by multiple clients. Clients here are different cores in the + SoC, the idea is to minimize the local caches at the clients and migrate to + common pool of memory. Cache memory is divided into partitions called slices + which are assigned to clients. Clients can query the slice details, activate + and deactivate them. + +properties: + compatible: + enum: + - qcom,sc7180-llcc + - qcom,sdm845-llcc + + reg: + items: + - description: LLCC base register region + - description: LLCC broadcast base register region + + reg-names: + items: + - const: llcc_base + - const: llcc_broadcast_base + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0x1100000 0x200000>, <0x1300000 0x50000> ; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt new file mode 100644 index 000000000000..fcd3456afbbe --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt @@ -0,0 +1,29 @@ +OMAP PRM instance bindings + +Power and Reset Manager is an IP block on OMAP family of devices which +handle the power domains and their current state, and provide reset +handling for the domains and/or separate IP blocks under the power domain +hierarchy. + +Required properties: +- compatible: Must contain one of the following: + "ti,am3-prm-inst" + "ti,am4-prm-inst" + "ti,omap4-prm-inst" + "ti,omap5-prm-inst" + "ti,dra7-prm-inst" + and additionally must contain: + "ti,omap-prm-inst" +- reg: Contains PRM instance register address range + (base address and length) + +Optional properties: +- #reset-cells: Should be 1 if the PRM instance in question supports resets. + +Example: + +prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index a4fe136be2ba..18c3aea90df2 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -11,7 +11,9 @@ power management service, FPGA service and other platform management services. Required properties: - - compatible: Must contain: "xlnx,zynqmp-firmware" + - compatible: Must contain any of below: + "xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC + "xlnx,versal-firmware" for Versal - method: The method of calling the PM-API firmware layer. Permitted values are: - "smc" : SMC #0, following the SMCCC @@ -21,6 +23,8 @@ Required properties: Example ------- +Zynq Ultrascale+ MPSoC +---------------------- firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; @@ -28,3 +32,13 @@ firmware { ... }; }; + +Versal +------ +firmware { + versal_firmware: versal-firmware { + compatible = "xlnx,versal-firmware"; + method = "smc"; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index 2e0723ab3384..f7b3ed74db54 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" - clocks: phandle to the efuse peripheral clock provided by the clock controller. +- secure-monitor: phandle to the secure-monitor node = Data cells = Are child nodes of eFuse, bindings of which as described in @@ -16,6 +17,7 @@ Example: clocks = <&clkc CLKID_EFUSE>; #address-cells = <1>; #size-cells = <1>; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -30,6 +32,10 @@ Example: }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + = Data consumers = Are device nodes which consume nvmem data cells. diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt index eb35b22f9e23..bc75bf49cdae 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt @@ -5,6 +5,7 @@ which then translates it into a corresponding voltage on a rail Required Properties: - compatible: Should be one of the following + * qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC * qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC * qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt index 26e542eb96df..43e580ef64ba 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt @@ -4,7 +4,8 @@ The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Required properties: -- compatible: 'amlogic,meson-axg-audio-arb' +- compatible: 'amlogic,meson-axg-audio-arb' or + 'amlogic,meson-sm1-audio-arb' - reg: physical base address of the controller and length of memory mapped region. - clocks: phandle to the fifo peripheral clock provided by the audio diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index 00917d868d58..b3f57d81f007 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -16,6 +16,7 @@ properties: - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs + - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt deleted file mode 100644 index 510c748656ec..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt +++ /dev/null @@ -1,52 +0,0 @@ -Qualcomm AOSS Reset Controller -====================================== - -This binding describes a reset-controller found on AOSS-CC (always on subsystem) -for Qualcomm SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-aoss-cc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For list of all valid reset indicies see -<dt-bindings/reset/qcom,sdm845-aoss.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>; - reset-names = "mss_restart"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml new file mode 100644 index 000000000000..e2d85a1e1d63 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm AOSS Reset Controller + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describe the reset-controller found on AOSS-CC (always on + subsystem) for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-aoss-cc" + - const: "qcom,sdm845-aoss-cc" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-aoss-cc" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt deleted file mode 100644 index a62a492843e7..000000000000 --- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt +++ /dev/null @@ -1,52 +0,0 @@ -PDC Global -====================================== - -This binding describes a reset-controller found on PDC-Global (Power Domain -Controller) block for Qualcomm Technologies Inc SDM845 SoCs. - -Required properties: -- compatible: - Usage: required - Value type: <string> - Definition: must be: - "qcom,sdm845-pdc-global" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: must specify the base address and size of the register - space. - -- #reset-cells: - Usage: required - Value type: <uint> - Definition: must be 1; cell entry represents the reset index. - -Example: - -pdc_reset: reset-controller@b2e0000 { - compatible = "qcom,sdm845-pdc-global"; - reg = <0xb2e0000 0x20000>; - #reset-cells = <1>; -}; - -PDC reset clients -====================================== - -Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -For a list of all valid reset indices see -<dt-bindings/reset/qcom,sdm845-pdc.h> - -Example: - -modem-pil@4080000 { - ... - - resets = <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "pdc_reset"; - - ... -}; diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml new file mode 100644 index 000000000000..d7d8cec9419f --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PDC Global + +maintainers: + - Sibi Sankar <sibis@codeaurora.org> + +description: + The bindings describes the reset-controller found on PDC-Global (Power Domain + Controller) block for Qualcomm Technologies Inc SoCs. + +properties: + compatible: + oneOf: + - description: on SC7180 SoCs the following compatibles must be specified + items: + - const: "qcom,sc7180-pdc-global" + - const: "qcom,sdm845-pdc-global" + + - description: on SDM845 SoCs the following compatibles must be specified + items: + - const: "qcom,sdm845-pdc-global" + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0xb2e0000 0x20000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index ea005177d20a..e320a8cc9e4d 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -130,6 +130,7 @@ this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pro5-usb3-reset" - for Pro5 SoC USB3 "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 @@ -141,12 +142,12 @@ Required properties: - clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others - resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain - "gio", "link" - for Pro4 SoC + "gio", "link" - for Pro4 and Pro5 SoCs "link" - for others Example: diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt index e284e4e1ccd5..5a33619d881d 100644 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -5,7 +5,7 @@ and power management. Required properites: - reg : Offset and length of the register set of the RCPM block. - - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the fsl,rcpm-wakeup property. - compatible : Must contain a chip-specific RCPM block compatible string and (if applicable) may contain a chassis-version RCPM compatible @@ -20,6 +20,7 @@ Required properites: * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm All references to "1.0" and "2.0" refer to the QorIQ chassis version to which the chip complies. @@ -27,14 +28,19 @@ Chassis Version Example Chips --------------- ------------------------------- 1.0 p4080, p5020, p5040, p2041, p3041 2.0 t4240, b4860, b4420 -2.1 t1040, ls1021 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). Example: The RCPM node for T4240: rcpm: global-utilities@e2000 { compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; reg = <0xe2000 0x1000>; - fsl,#rcpm-wakeup-cells = <2>; + #fsl,rcpm-wakeup-cells = <2>; }; * Freescale RCPM Wakeup Source Device Tree Bindings @@ -44,7 +50,7 @@ can be used as a wakeup source. - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR register cells. The number of IPPDEXPCR register cells is defined in - "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is the bit mask that should be set in IPPDEXPCR0, and the second register cell is for IPPDEXPCR1, and so on. diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt index f3fa313963d5..616fddcd09fd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -22,6 +22,7 @@ resources. "qcom,rpm-apq8084" "qcom,rpm-msm8916" "qcom,rpm-msm8974" + "qcom,rpm-msm8976" "qcom,rpm-msm8998" "qcom,rpm-sdm660" "qcom,rpm-qcs404" diff --git a/MAINTAINERS b/MAINTAINERS index 65db0c6d98ef..df57e3ecad69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2140,6 +2140,7 @@ S: Maintained ARM/QUALCOMM SUPPORT M: Andy Gross <agross@kernel.org> +M: Bjorn Andersson <bjorn.andersson@linaro.org> L: linux-arm-msm@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/soc/qcom/ @@ -5001,6 +5002,14 @@ F: include/linux/dma-direct.h F: include/linux/dma-mapping.h F: include/linux/dma-noncoherent.h +DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422 +M: Lukasz Luba <l.luba@partner.samsung.com> +L: linux-pm@vger.kernel.org +L: linux-samsung-soc@vger.kernel.org +S: Maintained +F: drivers/memory/samsung/exynos5422-dmc.c +F: Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt + DME1737 HARDWARE MONITOR DRIVER M: Juerg Haefliger <juergh@gmail.com> L: linux-hwmon@vger.kernel.org @@ -11066,6 +11075,13 @@ F: arch/arm/boot/dts/mmp* F: arch/arm/mach-mmp/ F: linux/soc/mmp/ +MMP USB PHY DRIVERS +R: Lubomir Rintel <lkundrak@v3.sk> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: drivers/phy/marvell/phy-mmp3-usb.c +F: drivers/phy/marvell/phy-pxa-usb.c + MMU GATHER AND TLB INVALIDATION M: Will Deacon <will@kernel.org> M: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> @@ -14033,6 +14049,7 @@ F: include/dt-bindings/reset/ F: include/linux/reset.h F: include/linux/reset/ F: include/linux/reset-controller.h +K: \b(?:devm_|of_)?reset_control(?:ler_[a-z]+|_[a-z_]+)?\b RESTARTABLE SEQUENCES SUPPORT M: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index fdb6743760a2..ad08d470a2ca 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -109,6 +109,7 @@ config ARCH_OMAP2PLUS select TI_SYSC select OMAP_IRQCHIP select CLKSRC_TI_32K + select ARCH_HAS_RESET_CONTROLLER help Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 5817b51d2b15..70a9edb5f525 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -248,6 +248,60 @@ void wakeup_source_unregister(struct wakeup_source *ws) EXPORT_SYMBOL_GPL(wakeup_source_unregister); /** + * wakeup_sources_read_lock - Lock wakeup source list for read. + * + * Returns an index of srcu lock for struct wakeup_srcu. + * This index must be passed to the matching wakeup_sources_read_unlock(). + */ +int wakeup_sources_read_lock(void) +{ + return srcu_read_lock(&wakeup_srcu); +} +EXPORT_SYMBOL_GPL(wakeup_sources_read_lock); + +/** + * wakeup_sources_read_unlock - Unlock wakeup source list. + * @idx: return value from corresponding wakeup_sources_read_lock() + */ +void wakeup_sources_read_unlock(int idx) +{ + srcu_read_unlock(&wakeup_srcu, idx); +} +EXPORT_SYMBOL_GPL(wakeup_sources_read_unlock); + +/** + * wakeup_sources_walk_start - Begin a walk on wakeup source list + * + * Returns first object of the list of wakeup sources. + * + * Note that to be safe, wakeup sources list needs to be locked by calling + * wakeup_source_read_lock() for this. + */ +struct wakeup_source *wakeup_sources_walk_start(void) +{ + struct list_head *ws_head = &wakeup_sources; + + return list_entry_rcu(ws_head->next, struct wakeup_source, entry); +} +EXPORT_SYMBOL_GPL(wakeup_sources_walk_start); + +/** + * wakeup_sources_walk_next - Get next wakeup source from the list + * @ws: Previous wakeup source object + * + * Note that to be safe, wakeup sources list needs to be locked by calling + * wakeup_source_read_lock() for this. + */ +struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws) +{ + struct list_head *ws_head = &wakeup_sources; + + return list_next_or_null_rcu(ws_head, &ws->entry, + struct wakeup_source, entry); +} +EXPORT_SYMBOL_GPL(wakeup_sources_walk_next); + +/** * device_wakeup_attach - Attach a wakeup source object to a device object. * @dev: Device to handle. * @ws: Wakeup source object to attach to @dev. diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 97ab5ad171d4..50200d1c06ea 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -41,8 +41,9 @@ config MOXTET config HISILICON_LPC bool "Support for ISA I/O space on HiSilicon Hip06/7" - depends on ARM64 && (ARCH_HISI || COMPILE_TEST) - select INDIRECT_PIO + depends on (ARM64 && ARCH_HISI) || (COMPILE_TEST && !ALPHA && !HEXAGON && !PARISC && !C6X) + depends on HAS_IOMEM + select INDIRECT_PIO if ARM64 help Driver to enable I/O access to devices attached to the Low Pin Count bus on the HiSilicon Hip06/7 SoC. diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c index 20c957185af2..8101df901830 100644 --- a/drivers/bus/hisi_lpc.c +++ b/drivers/bus/hisi_lpc.c @@ -74,7 +74,7 @@ struct hisi_lpc_dev { /* About 10us. This is specific for single IO operations, such as inb */ #define LPC_PEROP_WAITCNT 100 -static int wait_lpc_idle(unsigned char *mbase, unsigned int waitcnt) +static int wait_lpc_idle(void __iomem *mbase, unsigned int waitcnt) { u32 status; @@ -209,7 +209,7 @@ static u32 hisi_lpc_comm_in(void *hostdata, unsigned long pio, size_t dwidth) struct hisi_lpc_dev *lpcdev = hostdata; struct lpc_cycle_para iopara; unsigned long addr; - u32 rd_data = 0; + __le32 rd_data = 0; int ret; if (!lpcdev || !dwidth || dwidth > LPC_MAX_DWIDTH) @@ -244,13 +244,12 @@ static void hisi_lpc_comm_out(void *hostdata, unsigned long pio, struct lpc_cycle_para iopara; const unsigned char *buf; unsigned long addr; + __le32 _val = cpu_to_le32(val); if (!lpcdev || !dwidth || dwidth > LPC_MAX_DWIDTH) return; - val = cpu_to_le32(val); - - buf = (const unsigned char *)&val; + buf = (const unsigned char *)&_val; addr = hisi_lpc_pio_to_addr(lpcdev, pio); iopara.opflags = FG_INCRADDR_LPC; diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 2b6670daf7fc..97b85493aa43 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -917,6 +917,9 @@ set_midle: return -EINVAL; } + if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_MSTANDBY) + best_mode = SYSC_IDLE_NO; + reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift); reg |= best_mode << regbits->midle_shift; sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); @@ -978,6 +981,9 @@ static int sysc_disable_module(struct device *dev) return ret; } + if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_MSTANDBY) + best_mode = SYSC_IDLE_FORCE; + reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift); reg |= best_mode << regbits->midle_shift; sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); @@ -1037,8 +1043,6 @@ static int __maybe_unused sysc_runtime_resume_legacy(struct device *dev, struct ti_sysc_platform_data *pdata; int error; - reset_control_deassert(ddata->rsts); - pdata = dev_get_platdata(ddata->dev); if (!pdata) return 0; @@ -1051,6 +1055,8 @@ static int __maybe_unused sysc_runtime_resume_legacy(struct device *dev, dev_err(dev, "%s: could not enable: %i\n", __func__, error); + reset_control_deassert(ddata->rsts); + return 0; } @@ -1104,8 +1110,6 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev) sysc_clkdm_deny_idle(ddata); - reset_control_deassert(ddata->rsts); - if (sysc_opt_clks_needed(ddata)) { error = sysc_enable_opt_clocks(ddata); if (error) @@ -1116,6 +1120,8 @@ static int __maybe_unused sysc_runtime_resume(struct device *dev) if (error) goto err_opt_clocks; + reset_control_deassert(ddata->rsts); + if (ddata->legacy_mode) { error = sysc_runtime_resume_legacy(dev, ddata); if (error) @@ -1251,6 +1257,10 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("gpu", 0x50000000, 0x14, -1, -1, 0x00010201, 0xffffffff, 0), SYSC_QUIRK("gpu", 0x50000000, 0xfe00, 0xfe10, -1, 0x40000000 , 0xffffffff, SYSC_MODULE_QUIRK_SGX), + SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050, + 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), + SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -1, 0x4ea2080d, 0xffffffff, + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY), SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0, SYSC_MODULE_QUIRK_WDT), /* Watchdog on am3 and am4 */ @@ -1309,8 +1319,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("usbhstll", 0, 0, 0x10, 0x14, 0x00000008, 0xffffffff, 0), SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, 0x14, 0x50700100, 0xffffffff, 0), SYSC_QUIRK("usb_host_hs", 0, 0, 0x10, -1, 0x50700101, 0xffffffff, 0), - SYSC_QUIRK("usb_otg_hs", 0, 0x400, 0x404, 0x408, 0x00000050, - 0xffffffff, 0), SYSC_QUIRK("vfpe", 0, 0, 0x104, -1, 0x4d001200, 0xffffffff, 0), #endif }; @@ -1532,37 +1540,6 @@ static int sysc_legacy_init(struct sysc *ddata) return error; } -/** - * sysc_rstctrl_reset_deassert - deassert rstctrl reset - * @ddata: device driver data - * @reset: reset before deassert - * - * A module can have both OCP softreset control and external rstctrl. - * If more complicated rstctrl resets are needed, please handle these - * directly from the child device driver and map only the module reset - * for the parent interconnect target module device. - * - * Automatic reset of the module on init can be skipped with the - * "ti,no-reset-on-init" device tree property. - */ -static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset) -{ - int error; - - if (!ddata->rsts) - return 0; - - if (reset) { - error = reset_control_assert(ddata->rsts); - if (error) - return error; - } - - reset_control_deassert(ddata->rsts); - - return 0; -} - /* * Note that the caller must ensure the interconnect target module is enabled * before calling reset. Otherwise reset will not complete. @@ -1625,15 +1602,6 @@ static int sysc_reset(struct sysc *ddata) static int sysc_init_module(struct sysc *ddata) { int error = 0; - bool manage_clocks = true; - - error = sysc_rstctrl_reset_deassert(ddata, false); - if (error) - return error; - - if (ddata->cfg.quirks & - (SYSC_QUIRK_NO_IDLE | SYSC_QUIRK_NO_IDLE_ON_INIT)) - manage_clocks = false; error = sysc_clockdomain_init(ddata); if (error) @@ -1654,7 +1622,7 @@ static int sysc_init_module(struct sysc *ddata) goto err_opt_clocks; if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) { - error = sysc_rstctrl_reset_deassert(ddata, true); + error = reset_control_deassert(ddata->rsts); if (error) goto err_main_clocks; } @@ -1666,28 +1634,32 @@ static int sysc_init_module(struct sysc *ddata) if (ddata->legacy_mode) { error = sysc_legacy_init(ddata); if (error) - goto err_main_clocks; + goto err_reset; } if (!ddata->legacy_mode) { error = sysc_enable_module(ddata->dev); if (error) - goto err_main_clocks; + goto err_reset; } error = sysc_reset(ddata); if (error) dev_err(ddata->dev, "Reset failed with %d\n", error); - if (!ddata->legacy_mode && manage_clocks) + if (error && !ddata->legacy_mode) sysc_disable_module(ddata->dev); +err_reset: + if (error && !(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) + reset_control_assert(ddata->rsts); + err_main_clocks: - if (manage_clocks) + if (error) sysc_disable_main_clocks(ddata); err_opt_clocks: /* No re-enable of clockdomain autoidle to prevent module autoidle */ - if (manage_clocks) { + if (error) { sysc_disable_opt_clocks(ddata); sysc_clkdm_allow_idle(ddata); } @@ -2460,10 +2432,17 @@ static int sysc_probe(struct platform_device *pdev) goto unprepare; } - /* Balance reset counts */ - if (ddata->rsts) + /* Balance use counts as PM runtime should have enabled these all */ + if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) reset_control_assert(ddata->rsts); + if (!(ddata->cfg.quirks & + (SYSC_QUIRK_NO_IDLE | SYSC_QUIRK_NO_IDLE_ON_INIT))) { + sysc_disable_main_clocks(ddata); + sysc_disable_opt_clocks(ddata); + sysc_clkdm_allow_idle(ddata); + } + sysc_show_registers(ddata); ddata->dev->type = &sysc_device_type; diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index 4a8012e3cb8c..601af4edad5e 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -323,7 +323,7 @@ static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db) if (db->mask) val = ioread64_hi_lo(db->addr) & db->mask; - iowrite64_hi_lo(db->set, db->addr); + iowrite64_hi_lo(db->set | val, db->addr); } #endif } diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c index a43d2db5cbdb..4265e9dbed84 100644 --- a/drivers/firmware/imx/imx-dsp.c +++ b/drivers/firmware/imx/imx-dsp.c @@ -114,7 +114,7 @@ static int imx_dsp_probe(struct platform_device *pdev) dev_info(dev, "NXP i.MX DSP IPC initialized\n"); - return devm_of_platform_populate(dev); + return 0; out: kfree(chan_name); for (j = 0; j < i; j++) { diff --git a/drivers/firmware/imx/imx-scu-irq.c b/drivers/firmware/imx/imx-scu-irq.c index 687121f8c4d5..db655e87cdc8 100644 --- a/drivers/firmware/imx/imx-scu-irq.c +++ b/drivers/firmware/imx/imx-scu-irq.c @@ -8,6 +8,7 @@ #include <dt-bindings/firmware/imx/rsrc.h> #include <linux/firmware/imx/ipc.h> +#include <linux/firmware/imx/sci.h> #include <linux/mailbox_client.h> #define IMX_SC_IRQ_FUNC_ENABLE 1 diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c index 04a24a863d6e..03b43b7a6d1d 100644 --- a/drivers/firmware/imx/imx-scu.c +++ b/drivers/firmware/imx/imx-scu.c @@ -107,6 +107,12 @@ static void imx_scu_rx_callback(struct mbox_client *c, void *msg) struct imx_sc_rpc_msg *hdr; u32 *data = msg; + if (!sc_ipc->msg) { + dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n", + sc_chan->idx, *data); + return; + } + if (sc_chan->idx == 0) { hdr = msg; sc_ipc->rx_size = hdr->size; @@ -156,6 +162,7 @@ static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg) */ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) { + uint8_t saved_svc, saved_func; struct imx_sc_rpc_msg *hdr; int ret; @@ -165,7 +172,11 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) mutex_lock(&sc_ipc->lock); reinit_completion(&sc_ipc->done); - sc_ipc->msg = msg; + if (have_resp) { + sc_ipc->msg = msg; + saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc; + saved_func = ((struct imx_sc_rpc_msg *)msg)->func; + } sc_ipc->count = 0; ret = imx_scu_ipc_write(sc_ipc, msg); if (ret < 0) { @@ -184,9 +195,20 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) /* response status is stored in hdr->func field */ hdr = msg; ret = hdr->func; + /* + * Some special SCU firmware APIs do NOT have return value + * in hdr->func, but they do have response data, those special + * APIs are defined as void function in SCU firmware, so they + * should be treated as return success always. + */ + if ((saved_svc == IMX_SC_RPC_SVC_MISC) && + (saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID || + saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS)) + ret = 0; } out: + sc_ipc->msg = NULL; mutex_unlock(&sc_ipc->lock); dev_dbg(sc_ipc->dev, "RPC SVC done\n"); diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c index 8d908a8e0d20..1d5b4d74f96d 100644 --- a/drivers/firmware/meson/meson_sm.c +++ b/drivers/firmware/meson/meson_sm.c @@ -35,7 +35,7 @@ struct meson_sm_chip { struct meson_sm_cmd cmd[]; }; -struct meson_sm_chip gxbb_chip = { +static const struct meson_sm_chip gxbb_chip = { .shmem_size = SZ_4K, .cmd_shmem_in_base = 0x82000020, .cmd_shmem_out_base = 0x82000021, @@ -54,8 +54,6 @@ struct meson_sm_firmware { void __iomem *sm_shmem_out_base; }; -static struct meson_sm_firmware fw; - static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip, unsigned int cmd_index) { @@ -90,6 +88,7 @@ static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size) /** * meson_sm_call - generic SMC32 call to the secure-monitor * + * @fw: Pointer to secure-monitor firmware * @cmd_index: Index of the SMC32 function ID * @ret: Returned value * @arg0: SMC32 Argument 0 @@ -100,15 +99,15 @@ static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size) * * Return: 0 on success, a negative value on error */ -int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, - u32 arg1, u32 arg2, u32 arg3, u32 arg4) +int meson_sm_call(struct meson_sm_firmware *fw, unsigned int cmd_index, + u32 *ret, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4) { u32 cmd, lret; - if (!fw.chip) + if (!fw->chip) return -ENOENT; - cmd = meson_sm_get_cmd(fw.chip, cmd_index); + cmd = meson_sm_get_cmd(fw->chip, cmd_index); if (!cmd) return -EINVAL; @@ -124,6 +123,7 @@ EXPORT_SYMBOL(meson_sm_call); /** * meson_sm_call_read - retrieve data from secure-monitor * + * @fw: Pointer to secure-monitor firmware * @buffer: Buffer to store the retrieved data * @bsize: Size of the buffer * @cmd_index: Index of the SMC32 function ID @@ -137,22 +137,23 @@ EXPORT_SYMBOL(meson_sm_call); * When 0 is returned there is no guarantee about the amount of * data read and bsize bytes are copied in buffer. */ -int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index, - u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4) +int meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer, + unsigned int bsize, unsigned int cmd_index, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4) { u32 size; int ret; - if (!fw.chip) + if (!fw->chip) return -ENOENT; - if (!fw.chip->cmd_shmem_out_base) + if (!fw->chip->cmd_shmem_out_base) return -EINVAL; - if (bsize > fw.chip->shmem_size) + if (bsize > fw->chip->shmem_size) return -EINVAL; - if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0) + if (meson_sm_call(fw, cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0) return -EINVAL; if (size > bsize) @@ -164,7 +165,7 @@ int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index, size = bsize; if (buffer) - memcpy(buffer, fw.sm_shmem_out_base, size); + memcpy(buffer, fw->sm_shmem_out_base, size); return ret; } @@ -173,6 +174,7 @@ EXPORT_SYMBOL(meson_sm_call_read); /** * meson_sm_call_write - send data to secure-monitor * + * @fw: Pointer to secure-monitor firmware * @buffer: Buffer containing data to send * @size: Size of the data to send * @cmd_index: Index of the SMC32 function ID @@ -184,23 +186,24 @@ EXPORT_SYMBOL(meson_sm_call_read); * * Return: size of sent data on success, a negative value on error */ -int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index, - u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4) +int meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer, + unsigned int size, unsigned int cmd_index, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4) { u32 written; - if (!fw.chip) + if (!fw->chip) return -ENOENT; - if (size > fw.chip->shmem_size) + if (size > fw->chip->shmem_size) return -EINVAL; - if (!fw.chip->cmd_shmem_in_base) + if (!fw->chip->cmd_shmem_in_base) return -EINVAL; - memcpy(fw.sm_shmem_in_base, buffer, size); + memcpy(fw->sm_shmem_in_base, buffer, size); - if (meson_sm_call(cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0) + if (meson_sm_call(fw, cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0) return -EINVAL; if (!written) @@ -210,6 +213,24 @@ int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index, } EXPORT_SYMBOL(meson_sm_call_write); +/** + * meson_sm_get - get pointer to meson_sm_firmware structure. + * + * @sm_node: Pointer to the secure-monitor Device Tree node. + * + * Return: NULL is the secure-monitor device is not ready. + */ +struct meson_sm_firmware *meson_sm_get(struct device_node *sm_node) +{ + struct platform_device *pdev = of_find_device_by_node(sm_node); + + if (!pdev) + return NULL; + + return platform_get_drvdata(pdev); +} +EXPORT_SYMBOL_GPL(meson_sm_get); + #define SM_CHIP_ID_LENGTH 119 #define SM_CHIP_ID_OFFSET 4 #define SM_CHIP_ID_SIZE 12 @@ -217,33 +238,25 @@ EXPORT_SYMBOL(meson_sm_call_write); static ssize_t serial_show(struct device *dev, struct device_attribute *attr, char *buf) { + struct platform_device *pdev = to_platform_device(dev); + struct meson_sm_firmware *fw; uint8_t *id_buf; int ret; + fw = platform_get_drvdata(pdev); + id_buf = kmalloc(SM_CHIP_ID_LENGTH, GFP_KERNEL); if (!id_buf) return -ENOMEM; - ret = meson_sm_call_read(id_buf, SM_CHIP_ID_LENGTH, SM_GET_CHIP_ID, + ret = meson_sm_call_read(fw, id_buf, SM_CHIP_ID_LENGTH, SM_GET_CHIP_ID, 0, 0, 0, 0, 0); if (ret < 0) { kfree(id_buf); return ret; } - ret = sprintf(buf, "%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n", - id_buf[SM_CHIP_ID_OFFSET + 0], - id_buf[SM_CHIP_ID_OFFSET + 1], - id_buf[SM_CHIP_ID_OFFSET + 2], - id_buf[SM_CHIP_ID_OFFSET + 3], - id_buf[SM_CHIP_ID_OFFSET + 4], - id_buf[SM_CHIP_ID_OFFSET + 5], - id_buf[SM_CHIP_ID_OFFSET + 6], - id_buf[SM_CHIP_ID_OFFSET + 7], - id_buf[SM_CHIP_ID_OFFSET + 8], - id_buf[SM_CHIP_ID_OFFSET + 9], - id_buf[SM_CHIP_ID_OFFSET + 10], - id_buf[SM_CHIP_ID_OFFSET + 11]); + ret = sprintf(buf, "%12phN\n", &id_buf[SM_CHIP_ID_OFFSET]); kfree(id_buf); @@ -268,25 +281,34 @@ static const struct of_device_id meson_sm_ids[] = { static int __init meson_sm_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; const struct meson_sm_chip *chip; + struct meson_sm_firmware *fw; + + fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL); + if (!fw) + return -ENOMEM; - chip = of_match_device(meson_sm_ids, &pdev->dev)->data; + chip = of_match_device(meson_sm_ids, dev)->data; if (chip->cmd_shmem_in_base) { - fw.sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base, - chip->shmem_size); - if (WARN_ON(!fw.sm_shmem_in_base)) + fw->sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base, + chip->shmem_size); + if (WARN_ON(!fw->sm_shmem_in_base)) goto out; } if (chip->cmd_shmem_out_base) { - fw.sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base, - chip->shmem_size); - if (WARN_ON(!fw.sm_shmem_out_base)) + fw->sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base, + chip->shmem_size); + if (WARN_ON(!fw->sm_shmem_out_base)) goto out_in_base; } - fw.chip = chip; + fw->chip = chip; + + platform_set_drvdata(pdev, fw); + pr_info("secure-monitor enabled\n"); if (sysfs_create_group(&pdev->dev.kobj, &meson_sm_sysfs_attr_group)) @@ -295,7 +317,7 @@ static int __init meson_sm_probe(struct platform_device *pdev) return 0; out_in_base: - iounmap(fw.sm_shmem_in_base); + iounmap(fw->sm_shmem_in_base); out: return -EINVAL; } diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c index 19c56133234b..6741fcda0c37 100644 --- a/drivers/firmware/tegra/bpmp.c +++ b/drivers/firmware/tegra/bpmp.c @@ -804,7 +804,7 @@ static int __maybe_unused tegra_bpmp_resume(struct device *dev) } static const struct dev_pm_ops tegra_bpmp_pm_ops = { - .resume_early = tegra_bpmp_resume, + .resume_noirq = tegra_bpmp_resume, }; #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \ diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index fd3d83745208..75bdfaa08380 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -711,8 +711,11 @@ static int zynqmp_firmware_probe(struct platform_device *pdev) int ret; np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp"); - if (!np) - return 0; + if (!np) { + np = of_find_compatible_node(NULL, NULL, "xlnx,versal"); + if (!np) + return 0; + } of_node_put(np); ret = get_set_conduit_method(dev->of_node); @@ -770,6 +773,7 @@ static int zynqmp_firmware_remove(struct platform_device *pdev) static const struct of_device_id zynqmp_firmware_of_match[] = { {.compatible = "xlnx,zynqmp-firmware"}, + {.compatible = "xlnx,versal-firmware"}, {}, }; MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match); diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 0322df9dc249..14386d0b5f57 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * EBI driver for Atmel chips * inspired by the fsl weim bus driver * * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ #include <linux/clk.h> @@ -19,6 +16,8 @@ #include <linux/regmap.h> #include <soc/at91/atmel-sfr.h> +#define AT91_EBI_NUM_CS 8 + struct atmel_ebi_dev_config { int cs; struct atmel_smc_cs_conf smcconf; @@ -314,7 +313,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, if (ret) return ret; - if (cs >= AT91_MATRIX_EBI_NUM_CS || + if (cs >= AT91_EBI_NUM_CS || !(ebi->caps->available_cs & BIT(cs))) { dev_err(dev, "invalid reg property in %pOF\n", np); return -EINVAL; @@ -344,7 +343,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, apply = true; i = 0; - for_each_set_bit(cs, &cslines, AT91_MATRIX_EBI_NUM_CS) { + for_each_set_bit(cs, &cslines, AT91_EBI_NUM_CS) { ebid->configs[i].cs = cs; if (apply) { diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c index 6827ed484750..82b415be18d1 100644 --- a/drivers/memory/brcmstb_dpfe.c +++ b/drivers/memory/brcmstb_dpfe.c @@ -127,7 +127,6 @@ enum dpfe_msg_fields { MSG_COMMAND, MSG_ARG_COUNT, MSG_ARG0, - MSG_CHKSUM, MSG_FIELD_MAX = 16 /* Max number of arguments */ }; @@ -180,7 +179,7 @@ struct dpfe_api { }; /* Things we need for as long as we are active. */ -struct private_data { +struct brcmstb_dpfe_priv { void __iomem *regs; void __iomem *dmem; void __iomem *imem; @@ -232,9 +231,13 @@ static struct attribute *dpfe_v3_attrs[] = { }; ATTRIBUTE_GROUPS(dpfe_v3); -/* API v2 firmware commands */ -static const struct dpfe_api dpfe_api_v2 = { - .version = 2, +/* + * Old API v2 firmware commands, as defined in the rev 0.61 specification, we + * use a version set to 1 to denote that it is not compatible with the new API + * v2 and onwards. + */ +static const struct dpfe_api dpfe_api_old_v2 = { + .version = 1, .fw_name = "dpfe.bin", .sysfs_attrs = dpfe_v2_groups, .command = { @@ -243,21 +246,42 @@ static const struct dpfe_api dpfe_api_v2 = { [MSG_COMMAND] = 1, [MSG_ARG_COUNT] = 1, [MSG_ARG0] = 1, - [MSG_CHKSUM] = 4, }, [DPFE_CMD_GET_REFRESH] = { [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, [MSG_COMMAND] = 2, [MSG_ARG_COUNT] = 1, [MSG_ARG0] = 1, - [MSG_CHKSUM] = 5, }, [DPFE_CMD_GET_VENDOR] = { [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, [MSG_COMMAND] = 2, [MSG_ARG_COUNT] = 1, [MSG_ARG0] = 2, - [MSG_CHKSUM] = 6, + }, + } +}; + +/* + * API v2 firmware commands, as defined in the rev 0.8 specification, named new + * v2 here + */ +static const struct dpfe_api dpfe_api_new_v2 = { + .version = 2, + .fw_name = NULL, /* We expect the firmware to have been downloaded! */ + .sysfs_attrs = dpfe_v2_groups, + .command = { + [DPFE_CMD_GET_INFO] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 0x101, + }, + [DPFE_CMD_GET_REFRESH] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 0x201, + }, + [DPFE_CMD_GET_VENDOR] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 0x202, }, } }; @@ -273,49 +297,51 @@ static const struct dpfe_api dpfe_api_v3 = { [MSG_COMMAND] = 0x0101, [MSG_ARG_COUNT] = 1, [MSG_ARG0] = 1, - [MSG_CHKSUM] = 0x104, }, [DPFE_CMD_GET_REFRESH] = { [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, [MSG_COMMAND] = 0x0202, [MSG_ARG_COUNT] = 0, - /* - * This is a bit ugly. Without arguments, the checksum - * follows right after the argument count and not at - * offset MSG_CHKSUM. - */ - [MSG_ARG0] = 0x203, }, /* There's no GET_VENDOR command in API v3. */ }, }; -static bool is_dcpu_enabled(void __iomem *regs) +static bool is_dcpu_enabled(struct brcmstb_dpfe_priv *priv) { u32 val; - val = readl_relaxed(regs + REG_DCPU_RESET); + mutex_lock(&priv->lock); + val = readl_relaxed(priv->regs + REG_DCPU_RESET); + mutex_unlock(&priv->lock); return !(val & DCPU_RESET_MASK); } -static void __disable_dcpu(void __iomem *regs) +static void __disable_dcpu(struct brcmstb_dpfe_priv *priv) { u32 val; - if (!is_dcpu_enabled(regs)) + if (!is_dcpu_enabled(priv)) return; + mutex_lock(&priv->lock); + /* Put DCPU in reset if it's running. */ - val = readl_relaxed(regs + REG_DCPU_RESET); + val = readl_relaxed(priv->regs + REG_DCPU_RESET); val |= (1 << DCPU_RESET_SHIFT); - writel_relaxed(val, regs + REG_DCPU_RESET); + writel_relaxed(val, priv->regs + REG_DCPU_RESET); + + mutex_unlock(&priv->lock); } -static void __enable_dcpu(void __iomem *regs) +static void __enable_dcpu(struct brcmstb_dpfe_priv *priv) { + void __iomem *regs = priv->regs; u32 val; + mutex_lock(&priv->lock); + /* Clear mailbox registers. */ writel_relaxed(0, regs + REG_TO_DCPU_MBOX); writel_relaxed(0, regs + REG_TO_HOST_MBOX); @@ -329,6 +355,8 @@ static void __enable_dcpu(void __iomem *regs) val = readl_relaxed(regs + REG_DCPU_RESET); val &= ~(1 << DCPU_RESET_SHIFT); writel_relaxed(val, regs + REG_DCPU_RESET); + + mutex_unlock(&priv->lock); } static unsigned int get_msg_chksum(const u32 msg[], unsigned int max) @@ -343,7 +371,7 @@ static unsigned int get_msg_chksum(const u32 msg[], unsigned int max) return sum; } -static void __iomem *get_msg_ptr(struct private_data *priv, u32 response, +static void __iomem *get_msg_ptr(struct brcmstb_dpfe_priv *priv, u32 response, char *buf, ssize_t *size) { unsigned int msg_type; @@ -382,7 +410,7 @@ static void __iomem *get_msg_ptr(struct private_data *priv, u32 response, return ptr; } -static void __finalize_command(struct private_data *priv) +static void __finalize_command(struct brcmstb_dpfe_priv *priv) { unsigned int release_mbox; @@ -390,12 +418,12 @@ static void __finalize_command(struct private_data *priv) * It depends on the API version which MBOX register we have to write to * to signal we are done. */ - release_mbox = (priv->dpfe_api->version < 3) + release_mbox = (priv->dpfe_api->version < 2) ? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX; writel_relaxed(0, priv->regs + release_mbox); } -static int __send_command(struct private_data *priv, unsigned int cmd, +static int __send_command(struct brcmstb_dpfe_priv *priv, unsigned int cmd, u32 result[]) { const u32 *msg = priv->dpfe_api->command[cmd]; @@ -421,9 +449,17 @@ static int __send_command(struct private_data *priv, unsigned int cmd, return -ETIMEDOUT; } + /* Compute checksum over the message */ + chksum_idx = msg[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1; + chksum = get_msg_chksum(msg, chksum_idx); + /* Write command and arguments to message area */ - for (i = 0; i < MSG_FIELD_MAX; i++) - writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i)); + for (i = 0; i < MSG_FIELD_MAX; i++) { + if (i == chksum_idx) + writel_relaxed(chksum, regs + DCPU_MSG_RAM(i)); + else + writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i)); + } /* Tell DCPU there is a command waiting */ writel_relaxed(1, regs + REG_TO_DCPU_MBOX); @@ -517,7 +553,7 @@ static int __verify_firmware(struct init_data *init, /* Verify checksum by reading back the firmware from co-processor RAM. */ static int __verify_fw_checksum(struct init_data *init, - struct private_data *priv, + struct brcmstb_dpfe_priv *priv, const struct dpfe_firmware_header *header, u32 checksum) { @@ -571,26 +607,23 @@ static int __write_firmware(u32 __iomem *mem, const u32 *fw, return 0; } -static int brcmstb_dpfe_download_firmware(struct platform_device *pdev, - struct init_data *init) +static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv) { const struct dpfe_firmware_header *header; unsigned int dmem_size, imem_size; - struct device *dev = &pdev->dev; + struct device *dev = priv->dev; bool is_big_endian = false; - struct private_data *priv; const struct firmware *fw; const u32 *dmem, *imem; + struct init_data init; const void *fw_blob; int ret; - priv = platform_get_drvdata(pdev); - /* * Skip downloading the firmware if the DCPU is already running and * responding to commands. */ - if (is_dcpu_enabled(priv->regs)) { + if (is_dcpu_enabled(priv)) { u32 response[MSG_FIELD_MAX]; ret = __send_command(priv, DPFE_CMD_GET_INFO, response); @@ -606,20 +639,23 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev, if (!priv->dpfe_api->fw_name) return -ENODEV; - ret = request_firmware(&fw, priv->dpfe_api->fw_name, dev); - /* request_firmware() prints its own error messages. */ + ret = firmware_request_nowarn(&fw, priv->dpfe_api->fw_name, dev); + /* + * Defer the firmware download if the firmware file couldn't be found. + * The root file system may not be available yet. + */ if (ret) - return ret; + return (ret == -ENOENT) ? -EPROBE_DEFER : ret; - ret = __verify_firmware(init, fw); + ret = __verify_firmware(&init, fw); if (ret) return -EFAULT; - __disable_dcpu(priv->regs); + __disable_dcpu(priv); - is_big_endian = init->is_big_endian; - dmem_size = init->dmem_len; - imem_size = init->imem_len; + is_big_endian = init.is_big_endian; + dmem_size = init.dmem_len; + imem_size = init.imem_len; /* At the beginning of the firmware blob is a header. */ header = (struct dpfe_firmware_header *)fw->data; @@ -637,17 +673,17 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev, if (ret) return ret; - ret = __verify_fw_checksum(init, priv, header, init->chksum); + ret = __verify_fw_checksum(&init, priv, header, init.chksum); if (ret) return ret; - __enable_dcpu(priv->regs); + __enable_dcpu(priv); return 0; } static ssize_t generic_show(unsigned int command, u32 response[], - struct private_data *priv, char *buf) + struct brcmstb_dpfe_priv *priv, char *buf) { int ret; @@ -665,7 +701,7 @@ static ssize_t show_info(struct device *dev, struct device_attribute *devattr, char *buf) { u32 response[MSG_FIELD_MAX]; - struct private_data *priv; + struct brcmstb_dpfe_priv *priv; unsigned int info; ssize_t ret; @@ -688,7 +724,7 @@ static ssize_t show_refresh(struct device *dev, { u32 response[MSG_FIELD_MAX]; void __iomem *info; - struct private_data *priv; + struct brcmstb_dpfe_priv *priv; u8 refresh, sr_abort, ppre, thermal_offs, tuf; u32 mr4; ssize_t ret; @@ -721,7 +757,7 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { u32 response[MSG_FIELD_MAX]; - struct private_data *priv; + struct brcmstb_dpfe_priv *priv; void __iomem *info; unsigned long val; int ret; @@ -747,7 +783,7 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr, char *buf) { u32 response[MSG_FIELD_MAX]; - struct private_data *priv; + struct brcmstb_dpfe_priv *priv; void __iomem *info; ssize_t ret; u32 mr5, mr6, mr7, mr8, err; @@ -778,7 +814,7 @@ static ssize_t show_dram(struct device *dev, struct device_attribute *devattr, char *buf) { u32 response[MSG_FIELD_MAX]; - struct private_data *priv; + struct brcmstb_dpfe_priv *priv; ssize_t ret; u32 mr4, mr5, mr6, mr7, mr8, err; @@ -800,16 +836,15 @@ static ssize_t show_dram(struct device *dev, struct device_attribute *devattr, static int brcmstb_dpfe_resume(struct platform_device *pdev) { - struct init_data init; + struct brcmstb_dpfe_priv *priv = platform_get_drvdata(pdev); - return brcmstb_dpfe_download_firmware(pdev, &init); + return brcmstb_dpfe_download_firmware(priv); } static int brcmstb_dpfe_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct private_data *priv; - struct init_data init; + struct brcmstb_dpfe_priv *priv; struct resource *res; int ret; @@ -817,6 +852,8 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + priv->dev = dev; + mutex_init(&priv->lock); platform_set_drvdata(pdev, priv); @@ -851,9 +888,10 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev) return -ENOENT; } - ret = brcmstb_dpfe_download_firmware(pdev, &init); + ret = brcmstb_dpfe_download_firmware(priv); if (ret) { - dev_err(dev, "Couldn't download firmware -- %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Couldn't download firmware -- %d\n", ret); return ret; } @@ -867,7 +905,7 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev) static int brcmstb_dpfe_remove(struct platform_device *pdev) { - struct private_data *priv = dev_get_drvdata(&pdev->dev); + struct brcmstb_dpfe_priv *priv = dev_get_drvdata(&pdev->dev); sysfs_remove_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs); @@ -876,10 +914,10 @@ static int brcmstb_dpfe_remove(struct platform_device *pdev) static const struct of_device_id brcmstb_dpfe_of_match[] = { /* Use legacy API v2 for a select number of chips */ - { .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_v2 }, - { .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_v2 }, - { .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_v2 }, - { .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_v2 }, + { .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_old_v2 }, + { .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_old_v2 }, + { .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_old_v2 }, + { .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_new_v2 }, /* API v3 is the default going forward */ { .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v3 }, {} diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index 402c6bc8e621..9d9127bf2a59 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -1613,7 +1613,7 @@ static void emif_shutdown(struct platform_device *pdev) static int get_emif_reg_values(struct emif_data *emif, u32 freq, struct emif_regs *regs) { - u32 cs1_used, ip_rev, phy_type; + u32 ip_rev, phy_type; u32 cl, type; const struct lpddr2_timings *timings; const struct lpddr2_min_tck *min_tck; @@ -1621,7 +1621,6 @@ static int get_emif_reg_values(struct emif_data *emif, u32 freq, const struct lpddr2_addressing *addressing; struct emif_data *emif_for_calc; struct device *dev; - const struct emif_custom_configs *custom_configs; dev = emif->dev; /* @@ -1639,12 +1638,10 @@ static int get_emif_reg_values(struct emif_data *emif, u32 freq, device_info = emif_for_calc->plat_data->device_info; type = device_info->type; - cs1_used = device_info->cs1_used; ip_rev = emif_for_calc->plat_data->ip_rev; phy_type = emif_for_calc->plat_data->phy_type; min_tck = emif_for_calc->plat_data->min_tck; - custom_configs = emif_for_calc->plat_data->custom_configs; set_ddr_clk_period(freq); diff --git a/drivers/memory/jedec_ddr.h b/drivers/memory/jedec_ddr.h index 4a21b5044ff8..e59ccbd982d0 100644 --- a/drivers/memory/jedec_ddr.h +++ b/drivers/memory/jedec_ddr.h @@ -29,6 +29,7 @@ #define DDR_TYPE_LPDDR2_S4 3 #define DDR_TYPE_LPDDR2_S2 4 #define DDR_TYPE_LPDDR2_NVM 5 +#define DDR_TYPE_LPDDR3 6 /* DDR IO width */ #define DDR_IO_WIDTH_4 1 @@ -169,4 +170,64 @@ extern const struct lpddr2_timings lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES]; extern const struct lpddr2_min_tck lpddr2_jedec_min_tck; +/* + * Structure for timings for LPDDR3 based on LPDDR2 plus additional fields. + * All parameters are in pico seconds(ps) excluding max_freq, min_freq which + * are in Hz. + */ +struct lpddr3_timings { + u32 max_freq; + u32 min_freq; + u32 tRFC; + u32 tRRD; + u32 tRPab; + u32 tRPpb; + u32 tRCD; + u32 tRC; + u32 tRAS; + u32 tWTR; + u32 tWR; + u32 tRTP; + u32 tW2W_C2C; + u32 tR2R_C2C; + u32 tWL; + u32 tDQSCK; + u32 tRL; + u32 tFAW; + u32 tXSR; + u32 tXP; + u32 tCKE; + u32 tCKESR; + u32 tMRD; +}; + +/* + * Min value for some parameters in terms of number of tCK cycles(nCK) + * Please set to zero parameters that are not valid for a given memory + * type + */ +struct lpddr3_min_tck { + u32 tRFC; + u32 tRRD; + u32 tRPab; + u32 tRPpb; + u32 tRCD; + u32 tRC; + u32 tRAS; + u32 tWTR; + u32 tWR; + u32 tRTP; + u32 tW2W_C2C; + u32 tR2R_C2C; + u32 tWL; + u32 tDQSCK; + u32 tRL; + u32 tFAW; + u32 tXSR; + u32 tXP; + u32 tCKE; + u32 tCKESR; + u32 tMRD; +}; + #endif /* __JEDEC_DDR_H */ diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c index 46539b27a3fb..71f26eac7350 100644 --- a/drivers/memory/of_memory.c +++ b/drivers/memory/of_memory.c @@ -3,6 +3,7 @@ * OpenFirmware helpers for memory drivers * * Copyright (C) 2012 Texas Instruments, Inc. + * Copyright (C) 2019 Samsung Electronics Co., Ltd. */ #include <linux/device.h> @@ -149,3 +150,151 @@ default_timings: return lpddr2_jedec_timings; } EXPORT_SYMBOL(of_get_ddr_timings); + +/** + * of_lpddr3_get_min_tck() - extract min timing values for lpddr3 + * @np: pointer to ddr device tree node + * @device: device requesting for min timing values + * + * Populates the lpddr3_min_tck structure by extracting data + * from device tree node. Returns a pointer to the populated + * structure. If any error in populating the structure, returns NULL. + */ +const struct lpddr3_min_tck *of_lpddr3_get_min_tck(struct device_node *np, + struct device *dev) +{ + int ret = 0; + struct lpddr3_min_tck *min; + + min = devm_kzalloc(dev, sizeof(*min), GFP_KERNEL); + if (!min) + goto default_min_tck; + + ret |= of_property_read_u32(np, "tRFC-min-tck", &min->tRFC); + ret |= of_property_read_u32(np, "tRRD-min-tck", &min->tRRD); + ret |= of_property_read_u32(np, "tRPab-min-tck", &min->tRPab); + ret |= of_property_read_u32(np, "tRPpb-min-tck", &min->tRPpb); + ret |= of_property_read_u32(np, "tRCD-min-tck", &min->tRCD); + ret |= of_property_read_u32(np, "tRC-min-tck", &min->tRC); + ret |= of_property_read_u32(np, "tRAS-min-tck", &min->tRAS); + ret |= of_property_read_u32(np, "tWTR-min-tck", &min->tWTR); + ret |= of_property_read_u32(np, "tWR-min-tck", &min->tWR); + ret |= of_property_read_u32(np, "tRTP-min-tck", &min->tRTP); + ret |= of_property_read_u32(np, "tW2W-C2C-min-tck", &min->tW2W_C2C); + ret |= of_property_read_u32(np, "tR2R-C2C-min-tck", &min->tR2R_C2C); + ret |= of_property_read_u32(np, "tWL-min-tck", &min->tWL); + ret |= of_property_read_u32(np, "tDQSCK-min-tck", &min->tDQSCK); + ret |= of_property_read_u32(np, "tRL-min-tck", &min->tRL); + ret |= of_property_read_u32(np, "tFAW-min-tck", &min->tFAW); + ret |= of_property_read_u32(np, "tXSR-min-tck", &min->tXSR); + ret |= of_property_read_u32(np, "tXP-min-tck", &min->tXP); + ret |= of_property_read_u32(np, "tCKE-min-tck", &min->tCKE); + ret |= of_property_read_u32(np, "tCKESR-min-tck", &min->tCKESR); + ret |= of_property_read_u32(np, "tMRD-min-tck", &min->tMRD); + + if (ret) { + dev_warn(dev, "%s: errors while parsing min-tck values\n", + __func__); + devm_kfree(dev, min); + goto default_min_tck; + } + + return min; + +default_min_tck: + dev_warn(dev, "%s: using default min-tck values\n", __func__); + return NULL; +} +EXPORT_SYMBOL(of_lpddr3_get_min_tck); + +static int of_lpddr3_do_get_timings(struct device_node *np, + struct lpddr3_timings *tim) +{ + int ret; + + /* The 'reg' param required since DT has changed, used as 'max-freq' */ + ret = of_property_read_u32(np, "reg", &tim->max_freq); + ret |= of_property_read_u32(np, "min-freq", &tim->min_freq); + ret |= of_property_read_u32(np, "tRFC", &tim->tRFC); + ret |= of_property_read_u32(np, "tRRD", &tim->tRRD); + ret |= of_property_read_u32(np, "tRPab", &tim->tRPab); + ret |= of_property_read_u32(np, "tRPpb", &tim->tRPpb); + ret |= of_property_read_u32(np, "tRCD", &tim->tRCD); + ret |= of_property_read_u32(np, "tRC", &tim->tRC); + ret |= of_property_read_u32(np, "tRAS", &tim->tRAS); + ret |= of_property_read_u32(np, "tWTR", &tim->tWTR); + ret |= of_property_read_u32(np, "tWR", &tim->tWR); + ret |= of_property_read_u32(np, "tRTP", &tim->tRTP); + ret |= of_property_read_u32(np, "tW2W-C2C", &tim->tW2W_C2C); + ret |= of_property_read_u32(np, "tR2R-C2C", &tim->tR2R_C2C); + ret |= of_property_read_u32(np, "tFAW", &tim->tFAW); + ret |= of_property_read_u32(np, "tXSR", &tim->tXSR); + ret |= of_property_read_u32(np, "tXP", &tim->tXP); + ret |= of_property_read_u32(np, "tCKE", &tim->tCKE); + ret |= of_property_read_u32(np, "tCKESR", &tim->tCKESR); + ret |= of_property_read_u32(np, "tMRD", &tim->tMRD); + + return ret; +} + +/** + * of_lpddr3_get_ddr_timings() - extracts the lpddr3 timings and updates no of + * frequencies available. + * @np_ddr: Pointer to ddr device tree node + * @dev: Device requesting for ddr timings + * @device_type: Type of ddr + * @nr_frequencies: No of frequencies available for ddr + * (updated by this function) + * + * Populates lpddr3_timings structure by extracting data from device + * tree node. Returns pointer to populated structure. If any error + * while populating, returns NULL. + */ +const struct lpddr3_timings +*of_lpddr3_get_ddr_timings(struct device_node *np_ddr, struct device *dev, + u32 device_type, u32 *nr_frequencies) +{ + struct lpddr3_timings *timings = NULL; + u32 arr_sz = 0, i = 0; + struct device_node *np_tim; + char *tim_compat = NULL; + + switch (device_type) { + case DDR_TYPE_LPDDR3: + tim_compat = "jedec,lpddr3-timings"; + break; + default: + dev_warn(dev, "%s: un-supported memory type\n", __func__); + } + + for_each_child_of_node(np_ddr, np_tim) + if (of_device_is_compatible(np_tim, tim_compat)) + arr_sz++; + + if (arr_sz) + timings = devm_kcalloc(dev, arr_sz, sizeof(*timings), + GFP_KERNEL); + + if (!timings) + goto default_timings; + + for_each_child_of_node(np_ddr, np_tim) { + if (of_device_is_compatible(np_tim, tim_compat)) { + if (of_lpddr3_do_get_timings(np_tim, &timings[i])) { + devm_kfree(dev, timings); + goto default_timings; + } + i++; + } + } + + *nr_frequencies = arr_sz; + + return timings; + +default_timings: + dev_warn(dev, "%s: failed to get timings\n", __func__); + *nr_frequencies = 0; + return NULL; +} +EXPORT_SYMBOL(of_lpddr3_get_ddr_timings); diff --git a/drivers/memory/of_memory.h b/drivers/memory/of_memory.h index b077cc836b0b..e39ecc4c733d 100644 --- a/drivers/memory/of_memory.h +++ b/drivers/memory/of_memory.h @@ -14,6 +14,11 @@ extern const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np, extern const struct lpddr2_timings *of_get_ddr_timings(struct device_node *np_ddr, struct device *dev, u32 device_type, u32 *nr_frequencies); +extern const struct lpddr3_min_tck + *of_lpddr3_get_min_tck(struct device_node *np, struct device *dev); +extern const struct lpddr3_timings + *of_lpddr3_get_ddr_timings(struct device_node *np_ddr, + struct device *dev, u32 device_type, u32 *nr_frequencies); #else static inline const struct lpddr2_min_tck *of_get_min_tck(struct device_node *np, struct device *dev) @@ -27,6 +32,19 @@ static inline const struct lpddr2_timings { return NULL; } + +static inline const struct lpddr3_min_tck + *of_lpddr3_get_min_tck(struct device_node *np, struct device *dev) +{ + return NULL; +} + +static inline const struct lpddr3_timings + *of_lpddr3_get_ddr_timings(struct device_node *np_ddr, + struct device *dev, u32 device_type, u32 *nr_frequencies) +{ + return NULL; +} #endif /* CONFIG_OF && CONFIG_DDR */ #endif /* __LINUX_MEMORY_OF_REG_ */ diff --git a/drivers/memory/samsung/Kconfig b/drivers/memory/samsung/Kconfig index 79ce7ea58903..e9c3ce92350c 100644 --- a/drivers/memory/samsung/Kconfig +++ b/drivers/memory/samsung/Kconfig @@ -7,6 +7,19 @@ config SAMSUNG_MC if SAMSUNG_MC +config EXYNOS5422_DMC + tristate "EXYNOS5422 Dynamic Memory Controller driver" + depends on ARCH_EXYNOS || (COMPILE_TEST && HAS_IOMEM) + select DDR + depends on DEVFREQ_GOV_SIMPLE_ONDEMAND + depends on (PM_DEVFREQ && PM_DEVFREQ_EVENT) + help + This adds driver for Exynos5422 DMC (Dynamic Memory Controller). + The driver provides support for Dynamic Voltage and Frequency Scaling in + DMC and DRAM. It also supports changing timings of DRAM running with + different frequency. The timings are calculated based on DT memory + information. + config EXYNOS_SROM bool "Exynos SROM controller driver" if COMPILE_TEST depends on (ARM && ARCH_EXYNOS) || (COMPILE_TEST && HAS_IOMEM) diff --git a/drivers/memory/samsung/Makefile b/drivers/memory/samsung/Makefile index 00587be66211..ea071be21c44 100644 --- a/drivers/memory/samsung/Makefile +++ b/drivers/memory/samsung/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_EXYNOS5422_DMC) += exynos5422-dmc.o obj-$(CONFIG_EXYNOS_SROM) += exynos-srom.o diff --git a/drivers/memory/samsung/exynos5422-dmc.c b/drivers/memory/samsung/exynos5422-dmc.c new file mode 100644 index 000000000000..47dbf6d1789f --- /dev/null +++ b/drivers/memory/samsung/exynos5422-dmc.c @@ -0,0 +1,1550 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * Author: Lukasz Luba <l.luba@partner.samsung.com> + */ + +#include <linux/clk.h> +#include <linux/devfreq.h> +#include <linux/devfreq-event.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include "../jedec_ddr.h" +#include "../of_memory.h" + +#define EXYNOS5_DREXI_TIMINGAREF (0x0030) +#define EXYNOS5_DREXI_TIMINGROW0 (0x0034) +#define EXYNOS5_DREXI_TIMINGDATA0 (0x0038) +#define EXYNOS5_DREXI_TIMINGPOWER0 (0x003C) +#define EXYNOS5_DREXI_TIMINGROW1 (0x00E4) +#define EXYNOS5_DREXI_TIMINGDATA1 (0x00E8) +#define EXYNOS5_DREXI_TIMINGPOWER1 (0x00EC) +#define CDREX_PAUSE (0x2091c) +#define CDREX_LPDDR3PHY_CON3 (0x20a20) +#define CDREX_LPDDR3PHY_CLKM_SRC (0x20700) +#define EXYNOS5_TIMING_SET_SWI BIT(28) +#define USE_MX_MSPLL_TIMINGS (1) +#define USE_BPLL_TIMINGS (0) +#define EXYNOS5_AREF_NORMAL (0x2e) + +#define DREX_PPCCLKCON (0x0130) +#define DREX_PEREV2CONFIG (0x013c) +#define DREX_PMNC_PPC (0xE000) +#define DREX_CNTENS_PPC (0xE010) +#define DREX_CNTENC_PPC (0xE020) +#define DREX_INTENS_PPC (0xE030) +#define DREX_INTENC_PPC (0xE040) +#define DREX_FLAG_PPC (0xE050) +#define DREX_PMCNT2_PPC (0xE130) + +/* + * A value for register DREX_PMNC_PPC which should be written to reset + * the cycle counter CCNT (a reference wall clock). It sets zero to the + * CCNT counter. + */ +#define CC_RESET BIT(2) + +/* + * A value for register DREX_PMNC_PPC which does the reset of all performance + * counters to zero. + */ +#define PPC_COUNTER_RESET BIT(1) + +/* + * Enables all configured counters (including cycle counter). The value should + * be written to the register DREX_PMNC_PPC. + */ +#define PPC_ENABLE BIT(0) + +/* A value for register DREX_PPCCLKCON which enables performance events clock. + * Must be written before first access to the performance counters register + * set, otherwise it could crash. + */ +#define PEREV_CLK_EN BIT(0) + +/* + * Values which are used to enable counters, interrupts or configure flags of + * the performance counters. They configure counter 2 and cycle counter. + */ +#define PERF_CNT2 BIT(2) +#define PERF_CCNT BIT(31) + +/* + * Performance event types which are used for setting the preferred event + * to track in the counters. + * There is a set of different types, the values are from range 0 to 0x6f. + * These settings should be written to the configuration register which manages + * the type of the event (register DREX_PEREV2CONFIG). + */ +#define READ_TRANSFER_CH0 (0x6d) +#define READ_TRANSFER_CH1 (0x6f) + +#define PERF_COUNTER_START_VALUE 0xff000000 +#define PERF_EVENT_UP_DOWN_THRESHOLD 900000000ULL + +/** + * struct dmc_opp_table - Operating level desciption + * + * Covers frequency and voltage settings of the DMC operating mode. + */ +struct dmc_opp_table { + u32 freq_hz; + u32 volt_uv; +}; + +/** + * struct exynos5_dmc - main structure describing DMC device + * + * The main structure for the Dynamic Memory Controller which covers clocks, + * memory regions, HW information, parameters and current operating mode. + */ +struct exynos5_dmc { + struct device *dev; + struct devfreq *df; + struct devfreq_simple_ondemand_data gov_data; + void __iomem *base_drexi0; + void __iomem *base_drexi1; + struct regmap *clk_regmap; + struct mutex lock; + unsigned long curr_rate; + unsigned long curr_volt; + unsigned long bypass_rate; + struct dmc_opp_table *opp; + struct dmc_opp_table opp_bypass; + int opp_count; + u32 timings_arr_size; + u32 *timing_row; + u32 *timing_data; + u32 *timing_power; + const struct lpddr3_timings *timings; + const struct lpddr3_min_tck *min_tck; + u32 bypass_timing_row; + u32 bypass_timing_data; + u32 bypass_timing_power; + struct regulator *vdd_mif; + struct clk *fout_spll; + struct clk *fout_bpll; + struct clk *mout_spll; + struct clk *mout_bpll; + struct clk *mout_mclk_cdrex; + struct clk *mout_mx_mspll_ccore; + struct clk *mx_mspll_ccore_phy; + struct clk *mout_mx_mspll_ccore_phy; + struct devfreq_event_dev **counter; + int num_counters; + u64 last_overflow_ts[2]; + unsigned long load; + unsigned long total; + bool in_irq_mode; +}; + +#define TIMING_FIELD(t_name, t_bit_beg, t_bit_end) \ + { .name = t_name, .bit_beg = t_bit_beg, .bit_end = t_bit_end } + +#define TIMING_VAL2REG(timing, t_val) \ +({ \ + u32 __val; \ + __val = (t_val) << (timing)->bit_beg; \ + __val; \ +}) + +struct timing_reg { + char *name; + int bit_beg; + int bit_end; + unsigned int val; +}; + +static const struct timing_reg timing_row[] = { + TIMING_FIELD("tRFC", 24, 31), + TIMING_FIELD("tRRD", 20, 23), + TIMING_FIELD("tRP", 16, 19), + TIMING_FIELD("tRCD", 12, 15), + TIMING_FIELD("tRC", 6, 11), + TIMING_FIELD("tRAS", 0, 5), +}; + +static const struct timing_reg timing_data[] = { + TIMING_FIELD("tWTR", 28, 31), + TIMING_FIELD("tWR", 24, 27), + TIMING_FIELD("tRTP", 20, 23), + TIMING_FIELD("tW2W-C2C", 14, 14), + TIMING_FIELD("tR2R-C2C", 12, 12), + TIMING_FIELD("WL", 8, 11), + TIMING_FIELD("tDQSCK", 4, 7), + TIMING_FIELD("RL", 0, 3), +}; + +static const struct timing_reg timing_power[] = { + TIMING_FIELD("tFAW", 26, 31), + TIMING_FIELD("tXSR", 16, 25), + TIMING_FIELD("tXP", 8, 15), + TIMING_FIELD("tCKE", 4, 7), + TIMING_FIELD("tMRD", 0, 3), +}; + +#define TIMING_COUNT (ARRAY_SIZE(timing_row) + ARRAY_SIZE(timing_data) + \ + ARRAY_SIZE(timing_power)) + +static int exynos5_counters_set_event(struct exynos5_dmc *dmc) +{ + int i, ret; + + for (i = 0; i < dmc->num_counters; i++) { + if (!dmc->counter[i]) + continue; + ret = devfreq_event_set_event(dmc->counter[i]); + if (ret < 0) + return ret; + } + return 0; +} + +static int exynos5_counters_enable_edev(struct exynos5_dmc *dmc) +{ + int i, ret; + + for (i = 0; i < dmc->num_counters; i++) { + if (!dmc->counter[i]) + continue; + ret = devfreq_event_enable_edev(dmc->counter[i]); + if (ret < 0) + return ret; + } + return 0; +} + +static int exynos5_counters_disable_edev(struct exynos5_dmc *dmc) +{ + int i, ret; + + for (i = 0; i < dmc->num_counters; i++) { + if (!dmc->counter[i]) + continue; + ret = devfreq_event_disable_edev(dmc->counter[i]); + if (ret < 0) + return ret; + } + return 0; +} + +/** + * find_target_freq_id() - Finds requested frequency in local DMC configuration + * @dmc: device for which the information is checked + * @target_rate: requested frequency in KHz + * + * Seeks in the local DMC driver structure for the requested frequency value + * and returns index or error value. + */ +static int find_target_freq_idx(struct exynos5_dmc *dmc, + unsigned long target_rate) +{ + int i; + + for (i = dmc->opp_count - 1; i >= 0; i--) + if (dmc->opp[i].freq_hz <= target_rate) + return i; + + return -EINVAL; +} + +/** + * exynos5_switch_timing_regs() - Changes bank register set for DRAM timings + * @dmc: device for which the new settings is going to be applied + * @set: boolean variable passing set value + * + * Changes the register set, which holds timing parameters. + * There is two register sets: 0 and 1. The register set 0 + * is used in normal operation when the clock is provided from main PLL. + * The bank register set 1 is used when the main PLL frequency is going to be + * changed and the clock is taken from alternative, stable source. + * This function switches between these banks according to the + * currently used clock source. + */ +static void exynos5_switch_timing_regs(struct exynos5_dmc *dmc, bool set) +{ + unsigned int reg; + int ret; + + ret = regmap_read(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, ®); + + if (set) + reg |= EXYNOS5_TIMING_SET_SWI; + else + reg &= ~EXYNOS5_TIMING_SET_SWI; + + regmap_write(dmc->clk_regmap, CDREX_LPDDR3PHY_CON3, reg); +} + +/** + * exynos5_init_freq_table() - Initialized PM OPP framework + * @dmc: DMC device for which the frequencies are used for OPP init + * @profile: devfreq device's profile + * + * Populate the devfreq device's OPP table based on current frequency, voltage. + */ +static int exynos5_init_freq_table(struct exynos5_dmc *dmc, + struct devfreq_dev_profile *profile) +{ + int i, ret; + int idx; + unsigned long freq; + + ret = dev_pm_opp_of_add_table(dmc->dev); + if (ret < 0) { + dev_err(dmc->dev, "Failed to get OPP table\n"); + return ret; + } + + dmc->opp_count = dev_pm_opp_get_opp_count(dmc->dev); + + dmc->opp = devm_kmalloc_array(dmc->dev, dmc->opp_count, + sizeof(struct dmc_opp_table), GFP_KERNEL); + if (!dmc->opp) + goto err_opp; + + idx = dmc->opp_count - 1; + for (i = 0, freq = ULONG_MAX; i < dmc->opp_count; i++, freq--) { + struct dev_pm_opp *opp; + + opp = dev_pm_opp_find_freq_floor(dmc->dev, &freq); + if (IS_ERR(opp)) + goto err_opp; + + dmc->opp[idx - i].freq_hz = freq; + dmc->opp[idx - i].volt_uv = dev_pm_opp_get_voltage(opp); + + dev_pm_opp_put(opp); + } + + return 0; + +err_opp: + dev_pm_opp_of_remove_table(dmc->dev); + + return -EINVAL; +} + +/** + * exynos5_set_bypass_dram_timings() - Low-level changes of the DRAM timings + * @dmc: device for which the new settings is going to be applied + * @param: DRAM parameters which passes timing data + * + * Low-level function for changing timings for DRAM memory clocking from + * 'bypass' clock source (fixed frequency @400MHz). + * It uses timing bank registers set 1. + */ +static void exynos5_set_bypass_dram_timings(struct exynos5_dmc *dmc) +{ + writel(EXYNOS5_AREF_NORMAL, + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGAREF); + + writel(dmc->bypass_timing_row, + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGROW1); + writel(dmc->bypass_timing_row, + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGROW1); + writel(dmc->bypass_timing_data, + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGDATA1); + writel(dmc->bypass_timing_data, + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGDATA1); + writel(dmc->bypass_timing_power, + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGPOWER1); + writel(dmc->bypass_timing_power, + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGPOWER1); +} + +/** + * exynos5_dram_change_timings() - Low-level changes of the DRAM final timings + * @dmc: device for which the new settings is going to be applied + * @target_rate: target frequency of the DMC + * + * Low-level function for changing timings for DRAM memory operating from main + * clock source (BPLL), which can have different frequencies. Thus, each + * frequency must have corresponding timings register values in order to keep + * the needed delays. + * It uses timing bank registers set 0. + */ +static int exynos5_dram_change_timings(struct exynos5_dmc *dmc, + unsigned long target_rate) +{ + int idx; + + for (idx = dmc->opp_count - 1; idx >= 0; idx--) + if (dmc->opp[idx].freq_hz <= target_rate) + break; + + if (idx < 0) + return -EINVAL; + + writel(EXYNOS5_AREF_NORMAL, + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGAREF); + + writel(dmc->timing_row[idx], + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGROW0); + writel(dmc->timing_row[idx], + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGROW0); + writel(dmc->timing_data[idx], + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGDATA0); + writel(dmc->timing_data[idx], + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGDATA0); + writel(dmc->timing_power[idx], + dmc->base_drexi0 + EXYNOS5_DREXI_TIMINGPOWER0); + writel(dmc->timing_power[idx], + dmc->base_drexi1 + EXYNOS5_DREXI_TIMINGPOWER0); + + return 0; +} + +/** + * exynos5_dmc_align_target_voltage() - Sets the final voltage for the DMC + * @dmc: device for which it is going to be set + * @target_volt: new voltage which is chosen to be final + * + * Function tries to align voltage to the safe level for 'normal' mode. + * It checks the need of higher voltage and changes the value. The target + * voltage might be lower that currently set and still the system will be + * stable. + */ +static int exynos5_dmc_align_target_voltage(struct exynos5_dmc *dmc, + unsigned long target_volt) +{ + int ret = 0; + + if (dmc->curr_volt <= target_volt) + return 0; + + ret = regulator_set_voltage(dmc->vdd_mif, target_volt, + target_volt); + if (!ret) + dmc->curr_volt = target_volt; + + return ret; +} + +/** + * exynos5_dmc_align_bypass_voltage() - Sets the voltage for the DMC + * @dmc: device for which it is going to be set + * @target_volt: new voltage which is chosen to be final + * + * Function tries to align voltage to the safe level for the 'bypass' mode. + * It checks the need of higher voltage and changes the value. + * The target voltage must not be less than currently needed, because + * for current frequency the device might become unstable. + */ +static int exynos5_dmc_align_bypass_voltage(struct exynos5_dmc *dmc, + unsigned long target_volt) +{ + int ret = 0; + unsigned long bypass_volt = dmc->opp_bypass.volt_uv; + + target_volt = max(bypass_volt, target_volt); + + if (dmc->curr_volt >= target_volt) + return 0; + + ret = regulator_set_voltage(dmc->vdd_mif, target_volt, + target_volt); + if (!ret) + dmc->curr_volt = target_volt; + + return ret; +} + +/** + * exynos5_dmc_align_bypass_dram_timings() - Chooses and sets DRAM timings + * @dmc: device for which it is going to be set + * @target_rate: new frequency which is chosen to be final + * + * Function changes the DRAM timings for the temporary 'bypass' mode. + */ +static int exynos5_dmc_align_bypass_dram_timings(struct exynos5_dmc *dmc, + unsigned long target_rate) +{ + int idx = find_target_freq_idx(dmc, target_rate); + + if (idx < 0) + return -EINVAL; + + exynos5_set_bypass_dram_timings(dmc); + + return 0; +} + +/** + * exynos5_dmc_switch_to_bypass_configuration() - Switching to temporary clock + * @dmc: DMC device for which the switching is going to happen + * @target_rate: new frequency which is going to be set as a final + * @target_volt: new voltage which is going to be set as a final + * + * Function configures DMC and clocks for operating in temporary 'bypass' mode. + * This mode is used only temporary but if required, changes voltage and timings + * for DRAM chips. It switches the main clock to stable clock source for the + * period of the main PLL reconfiguration. + */ +static int +exynos5_dmc_switch_to_bypass_configuration(struct exynos5_dmc *dmc, + unsigned long target_rate, + unsigned long target_volt) +{ + int ret; + + /* + * Having higher voltage for a particular frequency does not harm + * the chip. Use it for the temporary frequency change when one + * voltage manipulation might be avoided. + */ + ret = exynos5_dmc_align_bypass_voltage(dmc, target_volt); + if (ret) + return ret; + + /* + * Longer delays for DRAM does not cause crash, the opposite does. + */ + ret = exynos5_dmc_align_bypass_dram_timings(dmc, target_rate); + if (ret) + return ret; + + /* + * Delays are long enough, so use them for the new coming clock. + */ + exynos5_switch_timing_regs(dmc, USE_MX_MSPLL_TIMINGS); + + return ret; +} + +/** + * exynos5_dmc_change_freq_and_volt() - Changes voltage and frequency of the DMC + * using safe procedure + * @dmc: device for which the frequency is going to be changed + * @target_rate: requested new frequency + * @target_volt: requested voltage which corresponds to the new frequency + * + * The DMC frequency change procedure requires a few steps. + * The main requirement is to change the clock source in the clk mux + * for the time of main clock PLL locking. The assumption is that the + * alternative clock source set as parent is stable. + * The second parent's clock frequency is fixed to 400MHz, it is named 'bypass' + * clock. This requires alignment in DRAM timing parameters for the new + * T-period. There is two bank sets for keeping DRAM + * timings: set 0 and set 1. The set 0 is used when main clock source is + * chosen. The 2nd set of regs is used for 'bypass' clock. Switching between + * the two bank sets is part of the process. + * The voltage must also be aligned to the minimum required level. There is + * this intermediate step with switching to 'bypass' parent clock source. + * if the old voltage is lower, it requires an increase of the voltage level. + * The complexity of the voltage manipulation is hidden in low level function. + * In this function there is last alignment of the voltage level at the end. + */ +static int +exynos5_dmc_change_freq_and_volt(struct exynos5_dmc *dmc, + unsigned long target_rate, + unsigned long target_volt) +{ + int ret; + + ret = exynos5_dmc_switch_to_bypass_configuration(dmc, target_rate, + target_volt); + if (ret) + return ret; + + /* + * Voltage is set at least to a level needed for this frequency, + * so switching clock source is safe now. + */ + clk_prepare_enable(dmc->fout_spll); + clk_prepare_enable(dmc->mout_spll); + clk_prepare_enable(dmc->mout_mx_mspll_ccore); + + ret = clk_set_parent(dmc->mout_mclk_cdrex, dmc->mout_mx_mspll_ccore); + if (ret) + goto disable_clocks; + + /* + * We are safe to increase the timings for current bypass frequency. + * Thanks to this the settings will be ready for the upcoming clock + * source change. + */ + exynos5_dram_change_timings(dmc, target_rate); + + clk_set_rate(dmc->fout_bpll, target_rate); + + exynos5_switch_timing_regs(dmc, USE_BPLL_TIMINGS); + + ret = clk_set_parent(dmc->mout_mclk_cdrex, dmc->mout_bpll); + if (ret) + goto disable_clocks; + + /* + * Make sure if the voltage is not from 'bypass' settings and align to + * the right level for power efficiency. + */ + ret = exynos5_dmc_align_target_voltage(dmc, target_volt); + +disable_clocks: + clk_disable_unprepare(dmc->mout_mx_mspll_ccore); + clk_disable_unprepare(dmc->mout_spll); + clk_disable_unprepare(dmc->fout_spll); + + return ret; +} + +/** + * exynos5_dmc_get_volt_freq() - Gets the frequency and voltage from the OPP + * table. + * @dmc: device for which the frequency is going to be changed + * @freq: requested frequency in KHz + * @target_rate: returned frequency which is the same or lower than + * requested + * @target_volt: returned voltage which corresponds to the returned + * frequency + * + * Function gets requested frequency and checks OPP framework for needed + * frequency and voltage. It populates the values 'target_rate' and + * 'target_volt' or returns error value when OPP framework fails. + */ +static int exynos5_dmc_get_volt_freq(struct exynos5_dmc *dmc, + unsigned long *freq, + unsigned long *target_rate, + unsigned long *target_volt, u32 flags) +{ + struct dev_pm_opp *opp; + + opp = devfreq_recommended_opp(dmc->dev, freq, flags); + if (IS_ERR(opp)) + return PTR_ERR(opp); + + *target_rate = dev_pm_opp_get_freq(opp); + *target_volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + return 0; +} + +/** + * exynos5_dmc_target() - Function responsible for changing frequency of DMC + * @dev: device for which the frequency is going to be changed + * @freq: requested frequency in KHz + * @flags: flags provided for this frequency change request + * + * An entry function provided to the devfreq framework which provides frequency + * change of the DMC. The function gets the possible rate from OPP table based + * on requested frequency. It calls the next function responsible for the + * frequency and voltage change. In case of failure, does not set 'curr_rate' + * and returns error value to the framework. + */ +static int exynos5_dmc_target(struct device *dev, unsigned long *freq, + u32 flags) +{ + struct exynos5_dmc *dmc = dev_get_drvdata(dev); + unsigned long target_rate = 0; + unsigned long target_volt = 0; + int ret; + + ret = exynos5_dmc_get_volt_freq(dmc, freq, &target_rate, &target_volt, + flags); + + if (ret) + return ret; + + if (target_rate == dmc->curr_rate) + return 0; + + mutex_lock(&dmc->lock); + + ret = exynos5_dmc_change_freq_and_volt(dmc, target_rate, target_volt); + + if (ret) { + mutex_unlock(&dmc->lock); + return ret; + } + + dmc->curr_rate = target_rate; + + mutex_unlock(&dmc->lock); + return 0; +} + +/** + * exynos5_counters_get() - Gets the performance counters values. + * @dmc: device for which the counters are going to be checked + * @load_count: variable which is populated with counter value + * @total_count: variable which is used as 'wall clock' reference + * + * Function which provides performance counters values. It sums up counters for + * two DMC channels. The 'total_count' is used as a reference and max value. + * The ratio 'load_count/total_count' shows the busy percentage [0%, 100%]. + */ +static int exynos5_counters_get(struct exynos5_dmc *dmc, + unsigned long *load_count, + unsigned long *total_count) +{ + unsigned long total = 0; + struct devfreq_event_data event; + int ret, i; + + *load_count = 0; + + /* Take into account only read+write counters, but stop all */ + for (i = 0; i < dmc->num_counters; i++) { + if (!dmc->counter[i]) + continue; + + ret = devfreq_event_get_event(dmc->counter[i], &event); + if (ret < 0) + return ret; + + *load_count += event.load_count; + + if (total < event.total_count) + total = event.total_count; + } + + *total_count = total; + + return 0; +} + +/** + * exynos5_dmc_start_perf_events() - Setup and start performance event counters + * @dmc: device for which the counters are going to be checked + * @beg_value: initial value for the counter + * + * Function which enables needed counters, interrupts and sets initial values + * then starts the counters. + */ +static void exynos5_dmc_start_perf_events(struct exynos5_dmc *dmc, + u32 beg_value) +{ + /* Enable interrupts for counter 2 */ + writel(PERF_CNT2, dmc->base_drexi0 + DREX_INTENS_PPC); + writel(PERF_CNT2, dmc->base_drexi1 + DREX_INTENS_PPC); + + /* Enable counter 2 and CCNT */ + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_CNTENS_PPC); + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_CNTENS_PPC); + + /* Clear overflow flag for all counters */ + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_FLAG_PPC); + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_FLAG_PPC); + + /* Reset all counters */ + writel(CC_RESET | PPC_COUNTER_RESET, dmc->base_drexi0 + DREX_PMNC_PPC); + writel(CC_RESET | PPC_COUNTER_RESET, dmc->base_drexi1 + DREX_PMNC_PPC); + + /* + * Set start value for the counters, the number of samples that + * will be gathered is calculated as: 0xffffffff - beg_value + */ + writel(beg_value, dmc->base_drexi0 + DREX_PMCNT2_PPC); + writel(beg_value, dmc->base_drexi1 + DREX_PMCNT2_PPC); + + /* Start all counters */ + writel(PPC_ENABLE, dmc->base_drexi0 + DREX_PMNC_PPC); + writel(PPC_ENABLE, dmc->base_drexi1 + DREX_PMNC_PPC); +} + +/** + * exynos5_dmc_perf_events_calc() - Calculate utilization + * @dmc: device for which the counters are going to be checked + * @diff_ts: time between last interrupt and current one + * + * Function which calculates needed utilization for the devfreq governor. + * It prepares values for 'busy_time' and 'total_time' based on elapsed time + * between interrupts, which approximates utilization. + */ +static void exynos5_dmc_perf_events_calc(struct exynos5_dmc *dmc, u64 diff_ts) +{ + /* + * This is a simple algorithm for managing traffic on DMC. + * When there is almost no load the counters overflow every 4s, + * no mater the DMC frequency. + * The high load might be approximated using linear function. + * Knowing that, simple calculation can provide 'busy_time' and + * 'total_time' to the devfreq governor which picks up target + * frequency. + * We want a fast ramp up and slow decay in frequency change function. + */ + if (diff_ts < PERF_EVENT_UP_DOWN_THRESHOLD) { + /* + * Set higher utilization for the simple_ondemand governor. + * The governor should increase the frequency of the DMC. + */ + dmc->load = 70; + dmc->total = 100; + } else { + /* + * Set low utilization for the simple_ondemand governor. + * The governor should decrease the frequency of the DMC. + */ + dmc->load = 35; + dmc->total = 100; + } + + dev_dbg(dmc->dev, "diff_ts=%llu\n", diff_ts); +} + +/** + * exynos5_dmc_perf_events_check() - Checks the status of the counters + * @dmc: device for which the counters are going to be checked + * + * Function which is called from threaded IRQ to check the counters state + * and to call approximation for the needed utilization. + */ +static void exynos5_dmc_perf_events_check(struct exynos5_dmc *dmc) +{ + u32 val; + u64 diff_ts, ts; + + ts = ktime_get_ns(); + + /* Stop all counters */ + writel(0, dmc->base_drexi0 + DREX_PMNC_PPC); + writel(0, dmc->base_drexi1 + DREX_PMNC_PPC); + + /* Check the source in interrupt flag registers (which channel) */ + val = readl(dmc->base_drexi0 + DREX_FLAG_PPC); + if (val) { + diff_ts = ts - dmc->last_overflow_ts[0]; + dmc->last_overflow_ts[0] = ts; + dev_dbg(dmc->dev, "drex0 0xE050 val= 0x%08x\n", val); + } else { + val = readl(dmc->base_drexi1 + DREX_FLAG_PPC); + diff_ts = ts - dmc->last_overflow_ts[1]; + dmc->last_overflow_ts[1] = ts; + dev_dbg(dmc->dev, "drex1 0xE050 val= 0x%08x\n", val); + } + + exynos5_dmc_perf_events_calc(dmc, diff_ts); + + exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE); +} + +/** + * exynos5_dmc_enable_perf_events() - Enable performance events + * @dmc: device for which the counters are going to be checked + * + * Function which is setup needed environment and enables counters. + */ +static void exynos5_dmc_enable_perf_events(struct exynos5_dmc *dmc) +{ + u64 ts; + + /* Enable Performance Event Clock */ + writel(PEREV_CLK_EN, dmc->base_drexi0 + DREX_PPCCLKCON); + writel(PEREV_CLK_EN, dmc->base_drexi1 + DREX_PPCCLKCON); + + /* Select read transfers as performance event2 */ + writel(READ_TRANSFER_CH0, dmc->base_drexi0 + DREX_PEREV2CONFIG); + writel(READ_TRANSFER_CH1, dmc->base_drexi1 + DREX_PEREV2CONFIG); + + ts = ktime_get_ns(); + dmc->last_overflow_ts[0] = ts; + dmc->last_overflow_ts[1] = ts; + + /* Devfreq shouldn't be faster than initialization, play safe though. */ + dmc->load = 99; + dmc->total = 100; +} + +/** + * exynos5_dmc_disable_perf_events() - Disable performance events + * @dmc: device for which the counters are going to be checked + * + * Function which stops, disables performance event counters and interrupts. + */ +static void exynos5_dmc_disable_perf_events(struct exynos5_dmc *dmc) +{ + /* Stop all counters */ + writel(0, dmc->base_drexi0 + DREX_PMNC_PPC); + writel(0, dmc->base_drexi1 + DREX_PMNC_PPC); + + /* Disable interrupts for counter 2 */ + writel(PERF_CNT2, dmc->base_drexi0 + DREX_INTENC_PPC); + writel(PERF_CNT2, dmc->base_drexi1 + DREX_INTENC_PPC); + + /* Disable counter 2 and CCNT */ + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_CNTENC_PPC); + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_CNTENC_PPC); + + /* Clear overflow flag for all counters */ + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi0 + DREX_FLAG_PPC); + writel(PERF_CNT2 | PERF_CCNT, dmc->base_drexi1 + DREX_FLAG_PPC); +} + +/** + * exynos5_dmc_get_status() - Read current DMC performance statistics. + * @dev: device for which the statistics are requested + * @stat: structure which has statistic fields + * + * Function reads the DMC performance counters and calculates 'busy_time' + * and 'total_time'. To protect from overflow, the values are shifted right + * by 10. After read out the counters are setup to count again. + */ +static int exynos5_dmc_get_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct exynos5_dmc *dmc = dev_get_drvdata(dev); + unsigned long load, total; + int ret; + + if (dmc->in_irq_mode) { + stat->current_frequency = dmc->curr_rate; + stat->busy_time = dmc->load; + stat->total_time = dmc->total; + } else { + ret = exynos5_counters_get(dmc, &load, &total); + if (ret < 0) + return -EINVAL; + + /* To protect from overflow, divide by 1024 */ + stat->busy_time = load >> 10; + stat->total_time = total >> 10; + + ret = exynos5_counters_set_event(dmc); + if (ret < 0) { + dev_err(dev, "could not set event counter\n"); + return ret; + } + } + + return 0; +} + +/** + * exynos5_dmc_get_cur_freq() - Function returns current DMC frequency + * @dev: device for which the framework checks operating frequency + * @freq: returned frequency value + * + * It returns the currently used frequency of the DMC. The real operating + * frequency might be lower when the clock source value could not be divided + * to the requested value. + */ +static int exynos5_dmc_get_cur_freq(struct device *dev, unsigned long *freq) +{ + struct exynos5_dmc *dmc = dev_get_drvdata(dev); + + mutex_lock(&dmc->lock); + *freq = dmc->curr_rate; + mutex_unlock(&dmc->lock); + + return 0; +} + +/** + * exynos5_dmc_df_profile - Devfreq governor's profile structure + * + * It provides to the devfreq framework needed functions and polling period. + */ +static struct devfreq_dev_profile exynos5_dmc_df_profile = { + .target = exynos5_dmc_target, + .get_dev_status = exynos5_dmc_get_status, + .get_cur_freq = exynos5_dmc_get_cur_freq, +}; + +/** + * exynos5_dmc_align_initial_frequency() - Align initial frequency value + * @dmc: device for which the frequency is going to be set + * @bootloader_init_freq: initial frequency set by the bootloader in KHz + * + * The initial bootloader frequency, which is present during boot, might be + * different that supported frequency values in the driver. It is possible + * due to different PLL settings or used PLL as a source. + * This function provides the 'initial_freq' for the devfreq framework + * statistics engine which supports only registered values. Thus, some alignment + * must be made. + */ +static unsigned long +exynos5_dmc_align_init_freq(struct exynos5_dmc *dmc, + unsigned long bootloader_init_freq) +{ + unsigned long aligned_freq; + int idx; + + idx = find_target_freq_idx(dmc, bootloader_init_freq); + if (idx >= 0) + aligned_freq = dmc->opp[idx].freq_hz; + else + aligned_freq = dmc->opp[dmc->opp_count - 1].freq_hz; + + return aligned_freq; +} + +/** + * create_timings_aligned() - Create register values and align with standard + * @dmc: device for which the frequency is going to be set + * @idx: speed bin in the OPP table + * @clk_period_ps: the period of the clock, known as tCK + * + * The function calculates timings and creates a register value ready for + * a frequency transition. The register contains a few timings. They are + * shifted by a known offset. The timing value is calculated based on memory + * specyfication: minimal time required and minimal cycles required. + */ +static int create_timings_aligned(struct exynos5_dmc *dmc, u32 *reg_timing_row, + u32 *reg_timing_data, u32 *reg_timing_power, + u32 clk_period_ps) +{ + u32 val; + const struct timing_reg *reg; + + if (clk_period_ps == 0) + return -EINVAL; + + *reg_timing_row = 0; + *reg_timing_data = 0; + *reg_timing_power = 0; + + val = dmc->timings->tRFC / clk_period_ps; + val += dmc->timings->tRFC % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRFC); + reg = &timing_row[0]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRRD / clk_period_ps; + val += dmc->timings->tRRD % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRRD); + reg = &timing_row[1]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRPab / clk_period_ps; + val += dmc->timings->tRPab % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRPab); + reg = &timing_row[2]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRCD / clk_period_ps; + val += dmc->timings->tRCD % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRCD); + reg = &timing_row[3]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRC / clk_period_ps; + val += dmc->timings->tRC % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRC); + reg = &timing_row[4]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRAS / clk_period_ps; + val += dmc->timings->tRAS % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRAS); + reg = &timing_row[5]; + *reg_timing_row |= TIMING_VAL2REG(reg, val); + + /* data related timings */ + val = dmc->timings->tWTR / clk_period_ps; + val += dmc->timings->tWTR % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tWTR); + reg = &timing_data[0]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tWR / clk_period_ps; + val += dmc->timings->tWR % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tWR); + reg = &timing_data[1]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRTP / clk_period_ps; + val += dmc->timings->tRTP % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRTP); + reg = &timing_data[2]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tW2W_C2C / clk_period_ps; + val += dmc->timings->tW2W_C2C % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tW2W_C2C); + reg = &timing_data[3]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tR2R_C2C / clk_period_ps; + val += dmc->timings->tR2R_C2C % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tR2R_C2C); + reg = &timing_data[4]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tWL / clk_period_ps; + val += dmc->timings->tWL % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tWL); + reg = &timing_data[5]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tDQSCK / clk_period_ps; + val += dmc->timings->tDQSCK % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tDQSCK); + reg = &timing_data[6]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tRL / clk_period_ps; + val += dmc->timings->tRL % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tRL); + reg = &timing_data[7]; + *reg_timing_data |= TIMING_VAL2REG(reg, val); + + /* power related timings */ + val = dmc->timings->tFAW / clk_period_ps; + val += dmc->timings->tFAW % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tXP); + reg = &timing_power[0]; + *reg_timing_power |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tXSR / clk_period_ps; + val += dmc->timings->tXSR % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tXSR); + reg = &timing_power[1]; + *reg_timing_power |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tXP / clk_period_ps; + val += dmc->timings->tXP % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tXP); + reg = &timing_power[2]; + *reg_timing_power |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tCKE / clk_period_ps; + val += dmc->timings->tCKE % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tCKE); + reg = &timing_power[3]; + *reg_timing_power |= TIMING_VAL2REG(reg, val); + + val = dmc->timings->tMRD / clk_period_ps; + val += dmc->timings->tMRD % clk_period_ps ? 1 : 0; + val = max(val, dmc->min_tck->tMRD); + reg = &timing_power[4]; + *reg_timing_power |= TIMING_VAL2REG(reg, val); + + return 0; +} + +/** + * of_get_dram_timings() - helper function for parsing DT settings for DRAM + * @dmc: device for which the frequency is going to be set + * + * The function parses DT entries with DRAM information. + */ +static int of_get_dram_timings(struct exynos5_dmc *dmc) +{ + int ret = 0; + int idx; + struct device_node *np_ddr; + u32 freq_mhz, clk_period_ps; + + np_ddr = of_parse_phandle(dmc->dev->of_node, "device-handle", 0); + if (!np_ddr) { + dev_warn(dmc->dev, "could not find 'device-handle' in DT\n"); + return -EINVAL; + } + + dmc->timing_row = devm_kmalloc_array(dmc->dev, TIMING_COUNT, + sizeof(u32), GFP_KERNEL); + if (!dmc->timing_row) + return -ENOMEM; + + dmc->timing_data = devm_kmalloc_array(dmc->dev, TIMING_COUNT, + sizeof(u32), GFP_KERNEL); + if (!dmc->timing_data) + return -ENOMEM; + + dmc->timing_power = devm_kmalloc_array(dmc->dev, TIMING_COUNT, + sizeof(u32), GFP_KERNEL); + if (!dmc->timing_power) + return -ENOMEM; + + dmc->timings = of_lpddr3_get_ddr_timings(np_ddr, dmc->dev, + DDR_TYPE_LPDDR3, + &dmc->timings_arr_size); + if (!dmc->timings) { + of_node_put(np_ddr); + dev_warn(dmc->dev, "could not get timings from DT\n"); + return -EINVAL; + } + + dmc->min_tck = of_lpddr3_get_min_tck(np_ddr, dmc->dev); + if (!dmc->min_tck) { + of_node_put(np_ddr); + dev_warn(dmc->dev, "could not get tck from DT\n"); + return -EINVAL; + } + + /* Sorted array of OPPs with frequency ascending */ + for (idx = 0; idx < dmc->opp_count; idx++) { + freq_mhz = dmc->opp[idx].freq_hz / 1000000; + clk_period_ps = 1000000 / freq_mhz; + + ret = create_timings_aligned(dmc, &dmc->timing_row[idx], + &dmc->timing_data[idx], + &dmc->timing_power[idx], + clk_period_ps); + } + + of_node_put(np_ddr); + + /* Take the highest frequency's timings as 'bypass' */ + dmc->bypass_timing_row = dmc->timing_row[idx - 1]; + dmc->bypass_timing_data = dmc->timing_data[idx - 1]; + dmc->bypass_timing_power = dmc->timing_power[idx - 1]; + + return ret; +} + +/** + * exynos5_dmc_init_clks() - Initialize clocks needed for DMC operation. + * @dmc: DMC structure containing needed fields + * + * Get the needed clocks defined in DT device, enable and set the right parents. + * Read current frequency and initialize the initial rate for governor. + */ +static int exynos5_dmc_init_clks(struct exynos5_dmc *dmc) +{ + int ret; + unsigned long target_volt = 0; + unsigned long target_rate = 0; + unsigned int tmp; + + dmc->fout_spll = devm_clk_get(dmc->dev, "fout_spll"); + if (IS_ERR(dmc->fout_spll)) + return PTR_ERR(dmc->fout_spll); + + dmc->fout_bpll = devm_clk_get(dmc->dev, "fout_bpll"); + if (IS_ERR(dmc->fout_bpll)) + return PTR_ERR(dmc->fout_bpll); + + dmc->mout_mclk_cdrex = devm_clk_get(dmc->dev, "mout_mclk_cdrex"); + if (IS_ERR(dmc->mout_mclk_cdrex)) + return PTR_ERR(dmc->mout_mclk_cdrex); + + dmc->mout_bpll = devm_clk_get(dmc->dev, "mout_bpll"); + if (IS_ERR(dmc->mout_bpll)) + return PTR_ERR(dmc->mout_bpll); + + dmc->mout_mx_mspll_ccore = devm_clk_get(dmc->dev, + "mout_mx_mspll_ccore"); + if (IS_ERR(dmc->mout_mx_mspll_ccore)) + return PTR_ERR(dmc->mout_mx_mspll_ccore); + + dmc->mout_spll = devm_clk_get(dmc->dev, "ff_dout_spll2"); + if (IS_ERR(dmc->mout_spll)) { + dmc->mout_spll = devm_clk_get(dmc->dev, "mout_sclk_spll"); + if (IS_ERR(dmc->mout_spll)) + return PTR_ERR(dmc->mout_spll); + } + + /* + * Convert frequency to KHz values and set it for the governor. + */ + dmc->curr_rate = clk_get_rate(dmc->mout_mclk_cdrex); + dmc->curr_rate = exynos5_dmc_align_init_freq(dmc, dmc->curr_rate); + exynos5_dmc_df_profile.initial_freq = dmc->curr_rate; + + ret = exynos5_dmc_get_volt_freq(dmc, &dmc->curr_rate, &target_rate, + &target_volt, 0); + if (ret) + return ret; + + dmc->curr_volt = target_volt; + + clk_set_parent(dmc->mout_mx_mspll_ccore, dmc->mout_spll); + + dmc->bypass_rate = clk_get_rate(dmc->mout_mx_mspll_ccore); + + clk_prepare_enable(dmc->fout_bpll); + clk_prepare_enable(dmc->mout_bpll); + + /* + * Some bootloaders do not set clock routes correctly. + * Stop one path in clocks to PHY. + */ + regmap_read(dmc->clk_regmap, CDREX_LPDDR3PHY_CLKM_SRC, &tmp); + tmp &= ~(BIT(1) | BIT(0)); + regmap_write(dmc->clk_regmap, CDREX_LPDDR3PHY_CLKM_SRC, tmp); + + return 0; +} + +/** + * exynos5_performance_counters_init() - Initializes performance DMC's counters + * @dmc: DMC for which it does the setup + * + * Initialization of performance counters in DMC for estimating usage. + * The counter's values are used for calculation of a memory bandwidth and based + * on that the governor changes the frequency. + * The counters are not used when the governor is GOVERNOR_USERSPACE. + */ +static int exynos5_performance_counters_init(struct exynos5_dmc *dmc) +{ + int counters_size; + int ret, i; + + dmc->num_counters = devfreq_event_get_edev_count(dmc->dev); + if (dmc->num_counters < 0) { + dev_err(dmc->dev, "could not get devfreq-event counters\n"); + return dmc->num_counters; + } + + counters_size = sizeof(struct devfreq_event_dev) * dmc->num_counters; + dmc->counter = devm_kzalloc(dmc->dev, counters_size, GFP_KERNEL); + if (!dmc->counter) + return -ENOMEM; + + for (i = 0; i < dmc->num_counters; i++) { + dmc->counter[i] = + devfreq_event_get_edev_by_phandle(dmc->dev, i); + if (IS_ERR_OR_NULL(dmc->counter[i])) + return -EPROBE_DEFER; + } + + ret = exynos5_counters_enable_edev(dmc); + if (ret < 0) { + dev_err(dmc->dev, "could not enable event counter\n"); + return ret; + } + + ret = exynos5_counters_set_event(dmc); + if (ret < 0) { + exynos5_counters_disable_edev(dmc); + dev_err(dmc->dev, "could not set event counter\n"); + return ret; + } + + return 0; +} + +/** + * exynos5_dmc_set_pause_on_switching() - Controls a pause feature in DMC + * @dmc: device which is used for changing this feature + * @set: a boolean state passing enable/disable request + * + * There is a need of pausing DREX DMC when divider or MUX in clock tree + * changes its configuration. In such situation access to the memory is blocked + * in DMC automatically. This feature is used when clock frequency change + * request appears and touches clock tree. + */ +static inline int exynos5_dmc_set_pause_on_switching(struct exynos5_dmc *dmc) +{ + unsigned int val; + int ret; + + ret = regmap_read(dmc->clk_regmap, CDREX_PAUSE, &val); + if (ret) + return ret; + + val |= 1UL; + regmap_write(dmc->clk_regmap, CDREX_PAUSE, val); + + return 0; +} + +static irqreturn_t dmc_irq_thread(int irq, void *priv) +{ + int res; + struct exynos5_dmc *dmc = priv; + + mutex_lock(&dmc->df->lock); + + exynos5_dmc_perf_events_check(dmc); + + res = update_devfreq(dmc->df); + if (res) + dev_warn(dmc->dev, "devfreq failed with %d\n", res); + + mutex_unlock(&dmc->df->lock); + + return IRQ_HANDLED; +} + +/** + * exynos5_dmc_probe() - Probe function for the DMC driver + * @pdev: platform device for which the driver is going to be initialized + * + * Initialize basic components: clocks, regulators, performance counters, etc. + * Read out product version and based on the information setup + * internal structures for the controller (frequency and voltage) and for DRAM + * memory parameters: timings for each operating frequency. + * Register new devfreq device for controlling DVFS of the DMC. + */ +static int exynos5_dmc_probe(struct platform_device *pdev) +{ + int ret = 0; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct exynos5_dmc *dmc; + struct resource *res; + int irq[2]; + + dmc = devm_kzalloc(dev, sizeof(*dmc), GFP_KERNEL); + if (!dmc) + return -ENOMEM; + + mutex_init(&dmc->lock); + + dmc->dev = dev; + platform_set_drvdata(pdev, dmc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dmc->base_drexi0 = devm_ioremap_resource(dev, res); + if (IS_ERR(dmc->base_drexi0)) + return PTR_ERR(dmc->base_drexi0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + dmc->base_drexi1 = devm_ioremap_resource(dev, res); + if (IS_ERR(dmc->base_drexi1)) + return PTR_ERR(dmc->base_drexi1); + + dmc->clk_regmap = syscon_regmap_lookup_by_phandle(np, + "samsung,syscon-clk"); + if (IS_ERR(dmc->clk_regmap)) + return PTR_ERR(dmc->clk_regmap); + + ret = exynos5_init_freq_table(dmc, &exynos5_dmc_df_profile); + if (ret) { + dev_warn(dev, "couldn't initialize frequency settings\n"); + return ret; + } + + dmc->vdd_mif = devm_regulator_get(dev, "vdd"); + if (IS_ERR(dmc->vdd_mif)) { + ret = PTR_ERR(dmc->vdd_mif); + return ret; + } + + ret = exynos5_dmc_init_clks(dmc); + if (ret) + return ret; + + ret = of_get_dram_timings(dmc); + if (ret) { + dev_warn(dev, "couldn't initialize timings settings\n"); + goto remove_clocks; + } + + ret = exynos5_dmc_set_pause_on_switching(dmc); + if (ret) { + dev_warn(dev, "couldn't get access to PAUSE register\n"); + goto remove_clocks; + } + + /* There is two modes in which the driver works: polling or IRQ */ + irq[0] = platform_get_irq_byname(pdev, "drex_0"); + irq[1] = platform_get_irq_byname(pdev, "drex_1"); + if (irq[0] > 0 && irq[1] > 0) { + ret = devm_request_threaded_irq(dev, irq[0], NULL, + dmc_irq_thread, IRQF_ONESHOT, + dev_name(dev), dmc); + if (ret) { + dev_err(dev, "couldn't grab IRQ\n"); + goto remove_clocks; + } + + ret = devm_request_threaded_irq(dev, irq[1], NULL, + dmc_irq_thread, IRQF_ONESHOT, + dev_name(dev), dmc); + if (ret) { + dev_err(dev, "couldn't grab IRQ\n"); + goto remove_clocks; + } + + /* + * Setup default thresholds for the devfreq governor. + * The values are chosen based on experiments. + */ + dmc->gov_data.upthreshold = 55; + dmc->gov_data.downdifferential = 5; + + exynos5_dmc_enable_perf_events(dmc); + + dmc->in_irq_mode = 1; + } else { + ret = exynos5_performance_counters_init(dmc); + if (ret) { + dev_warn(dev, "couldn't probe performance counters\n"); + goto remove_clocks; + } + + /* + * Setup default thresholds for the devfreq governor. + * The values are chosen based on experiments. + */ + dmc->gov_data.upthreshold = 30; + dmc->gov_data.downdifferential = 5; + + exynos5_dmc_df_profile.polling_ms = 500; + } + + + dmc->df = devm_devfreq_add_device(dev, &exynos5_dmc_df_profile, + DEVFREQ_GOV_SIMPLE_ONDEMAND, + &dmc->gov_data); + + if (IS_ERR(dmc->df)) { + ret = PTR_ERR(dmc->df); + goto err_devfreq_add; + } + + if (dmc->in_irq_mode) + exynos5_dmc_start_perf_events(dmc, PERF_COUNTER_START_VALUE); + + dev_info(dev, "DMC initialized\n"); + + return 0; + +err_devfreq_add: + if (dmc->in_irq_mode) + exynos5_dmc_disable_perf_events(dmc); + else + exynos5_counters_disable_edev(dmc); +remove_clocks: + clk_disable_unprepare(dmc->mout_bpll); + clk_disable_unprepare(dmc->fout_bpll); + + return ret; +} + +/** + * exynos5_dmc_remove() - Remove function for the platform device + * @pdev: platform device which is going to be removed + * + * The function relies on 'devm' framework function which automatically + * clean the device's resources. It just calls explicitly disable function for + * the performance counters. + */ +static int exynos5_dmc_remove(struct platform_device *pdev) +{ + struct exynos5_dmc *dmc = dev_get_drvdata(&pdev->dev); + + if (dmc->in_irq_mode) + exynos5_dmc_disable_perf_events(dmc); + else + exynos5_counters_disable_edev(dmc); + + clk_disable_unprepare(dmc->mout_bpll); + clk_disable_unprepare(dmc->fout_bpll); + + dev_pm_opp_remove_table(dmc->dev); + + return 0; +} + +static const struct of_device_id exynos5_dmc_of_match[] = { + { .compatible = "samsung,exynos5422-dmc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos5_dmc_of_match); + +static struct platform_driver exynos5_dmc_platdrv = { + .probe = exynos5_dmc_probe, + .remove = exynos5_dmc_remove, + .driver = { + .name = "exynos5-dmc", + .of_match_table = exynos5_dmc_of_match, + }, +}; +module_platform_driver(exynos5_dmc_platdrv); +MODULE_DESCRIPTION("Driver for Exynos5422 Dynamic Memory Controller dynamic frequency and voltage change"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Lukasz Luba"); diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig index 4680124ddcab..fbfbaada61a2 100644 --- a/drivers/memory/tegra/Kconfig +++ b/drivers/memory/tegra/Kconfig @@ -17,6 +17,16 @@ config TEGRA20_EMC This driver is required to change memory timings / clock rate for external memory. +config TEGRA30_EMC + bool "NVIDIA Tegra30 External Memory Controller driver" + default y + depends on TEGRA_MC && ARCH_TEGRA_3x_SOC + help + This driver is for the External Memory Controller (EMC) found on + Tegra30 chips. The EMC controls the external DRAM on the board. + This driver is required to change memory timings / clock rate for + external memory. + config TEGRA124_EMC bool "NVIDIA Tegra124 External Memory Controller driver" default y diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile index 3971a6b7c487..3d23c4261104 100644 --- a/drivers/memory/tegra/Makefile +++ b/drivers/memory/tegra/Makefile @@ -11,5 +11,6 @@ tegra-mc-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210.o obj-$(CONFIG_TEGRA_MC) += tegra-mc.o obj-$(CONFIG_TEGRA20_EMC) += tegra20-emc.o +obj-$(CONFIG_TEGRA30_EMC) += tegra30-emc.o obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index 3d8d322511c5..ec8403557ed4 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -5,6 +5,7 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> @@ -18,39 +19,6 @@ #include "mc.h" -#define MC_INTSTATUS 0x000 - -#define MC_INTMASK 0x004 - -#define MC_ERR_STATUS 0x08 -#define MC_ERR_STATUS_TYPE_SHIFT 28 -#define MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE (6 << MC_ERR_STATUS_TYPE_SHIFT) -#define MC_ERR_STATUS_TYPE_MASK (0x7 << MC_ERR_STATUS_TYPE_SHIFT) -#define MC_ERR_STATUS_READABLE (1 << 27) -#define MC_ERR_STATUS_WRITABLE (1 << 26) -#define MC_ERR_STATUS_NONSECURE (1 << 25) -#define MC_ERR_STATUS_ADR_HI_SHIFT 20 -#define MC_ERR_STATUS_ADR_HI_MASK 0x3 -#define MC_ERR_STATUS_SECURITY (1 << 17) -#define MC_ERR_STATUS_RW (1 << 16) - -#define MC_ERR_ADR 0x0c - -#define MC_GART_ERROR_REQ 0x30 -#define MC_DECERR_EMEM_OTHERS_STATUS 0x58 -#define MC_SECURITY_VIOLATION_STATUS 0x74 - -#define MC_EMEM_ARB_CFG 0x90 -#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(x) (((x) & 0x1ff) << 0) -#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff -#define MC_EMEM_ARB_MISC0 0xd8 - -#define MC_EMEM_ADR_CFG 0x54 -#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0) - -#define MC_TIMING_CONTROL 0xfc -#define MC_TIMING_UPDATE BIT(0) - static const struct of_device_id tegra_mc_of_match[] = { #ifdef CONFIG_ARCH_TEGRA_2x_SOC { .compatible = "nvidia,tegra20-mc-gart", .data = &tegra20_mc_soc }, @@ -307,7 +275,7 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc) return 0; } -void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate) +int tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate) { unsigned int i; struct tegra_mc_timing *timing = NULL; @@ -322,11 +290,13 @@ void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate) if (!timing) { dev_err(mc->dev, "no memory timing registered for rate %lu\n", rate); - return; + return -EINVAL; } for (i = 0; i < mc->soc->num_emem_regs; ++i) mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]); + + return 0; } unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc) @@ -626,6 +596,7 @@ static int tegra_mc_probe(struct platform_device *pdev) struct resource *res; struct tegra_mc *mc; void *isr; + u64 mask; int err; mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL); @@ -637,6 +608,14 @@ static int tegra_mc_probe(struct platform_device *pdev) mc->soc = of_device_get_match_data(&pdev->dev); mc->dev = &pdev->dev; + mask = DMA_BIT_MASK(mc->soc->num_address_bits); + + err = dma_coerce_mask_and_coherent(&pdev->dev, mask); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + return err; + } + /* length of MC tick in nanoseconds */ mc->tick = 30; @@ -658,6 +637,9 @@ static int tegra_mc_probe(struct platform_device *pdev) } else #endif { + /* ensure that debug features are disabled */ + mc_writel(mc, 0x00000000, MC_TIMING_CONTROL_DBG); + err = tegra_mc_setup_latency_allowance(mc); if (err < 0) { dev_err(&pdev->dev, diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h index f9353494b708..957c6eb74ff9 100644 --- a/drivers/memory/tegra/mc.h +++ b/drivers/memory/tegra/mc.h @@ -6,20 +6,76 @@ #ifndef MEMORY_TEGRA_MC_H #define MEMORY_TEGRA_MC_H +#include <linux/bits.h> #include <linux/io.h> #include <linux/types.h> #include <soc/tegra/mc.h> -#define MC_INT_DECERR_MTS (1 << 16) -#define MC_INT_SECERR_SEC (1 << 13) -#define MC_INT_DECERR_VPR (1 << 12) -#define MC_INT_INVALID_APB_ASID_UPDATE (1 << 11) -#define MC_INT_INVALID_SMMU_PAGE (1 << 10) -#define MC_INT_ARBITRATION_EMEM (1 << 9) -#define MC_INT_SECURITY_VIOLATION (1 << 8) -#define MC_INT_INVALID_GART_PAGE (1 << 7) -#define MC_INT_DECERR_EMEM (1 << 6) +#define MC_INTSTATUS 0x00 +#define MC_INTMASK 0x04 +#define MC_ERR_STATUS 0x08 +#define MC_ERR_ADR 0x0c +#define MC_GART_ERROR_REQ 0x30 +#define MC_EMEM_ADR_CFG 0x54 +#define MC_DECERR_EMEM_OTHERS_STATUS 0x58 +#define MC_SECURITY_VIOLATION_STATUS 0x74 +#define MC_EMEM_ARB_CFG 0x90 +#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94 +#define MC_EMEM_ARB_TIMING_RCD 0x98 +#define MC_EMEM_ARB_TIMING_RP 0x9c +#define MC_EMEM_ARB_TIMING_RC 0xa0 +#define MC_EMEM_ARB_TIMING_RAS 0xa4 +#define MC_EMEM_ARB_TIMING_FAW 0xa8 +#define MC_EMEM_ARB_TIMING_RRD 0xac +#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0 +#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4 +#define MC_EMEM_ARB_TIMING_R2R 0xb8 +#define MC_EMEM_ARB_TIMING_W2W 0xbc +#define MC_EMEM_ARB_TIMING_R2W 0xc0 +#define MC_EMEM_ARB_TIMING_W2R 0xc4 +#define MC_EMEM_ARB_DA_TURNS 0xd0 +#define MC_EMEM_ARB_DA_COVERS 0xd4 +#define MC_EMEM_ARB_MISC0 0xd8 +#define MC_EMEM_ARB_MISC1 0xdc +#define MC_EMEM_ARB_RING1_THROTTLE 0xe0 +#define MC_EMEM_ARB_OVERRIDE 0xe8 +#define MC_TIMING_CONTROL_DBG 0xf8 +#define MC_TIMING_CONTROL 0xfc + +#define MC_INT_DECERR_MTS BIT(16) +#define MC_INT_SECERR_SEC BIT(13) +#define MC_INT_DECERR_VPR BIT(12) +#define MC_INT_INVALID_APB_ASID_UPDATE BIT(11) +#define MC_INT_INVALID_SMMU_PAGE BIT(10) +#define MC_INT_ARBITRATION_EMEM BIT(9) +#define MC_INT_SECURITY_VIOLATION BIT(8) +#define MC_INT_INVALID_GART_PAGE BIT(7) +#define MC_INT_DECERR_EMEM BIT(6) + +#define MC_ERR_STATUS_TYPE_SHIFT 28 +#define MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE (0x6 << 28) +#define MC_ERR_STATUS_TYPE_MASK (0x7 << 28) +#define MC_ERR_STATUS_READABLE BIT(27) +#define MC_ERR_STATUS_WRITABLE BIT(26) +#define MC_ERR_STATUS_NONSECURE BIT(25) +#define MC_ERR_STATUS_ADR_HI_SHIFT 20 +#define MC_ERR_STATUS_ADR_HI_MASK 0x3 +#define MC_ERR_STATUS_SECURITY BIT(17) +#define MC_ERR_STATUS_RW BIT(16) + +#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0) + +#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(x) ((x) & 0x1ff) +#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff + +#define MC_EMEM_ARB_OUTSTANDING_REQ_MAX_MASK 0x1ff +#define MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE BIT(30) +#define MC_EMEM_ARB_OUTSTANDING_REQ_LIMIT_ENABLE BIT(31) + +#define MC_EMEM_ARB_OVERRIDE_EACK_MASK 0x3 + +#define MC_TIMING_UPDATE BIT(0) static inline u32 mc_readl(struct tegra_mc *mc, unsigned long offset) { diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c index ac8351b5beeb..48ef01c3ff90 100644 --- a/drivers/memory/tegra/tegra114.c +++ b/drivers/memory/tegra/tegra114.c @@ -909,16 +909,18 @@ static const struct tegra_smmu_swgroup tegra114_swgroups[] = { { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 }, }; -static const unsigned int tegra114_group_display[] = { +static const unsigned int tegra114_group_drm[] = { TEGRA_SWGROUP_DC, TEGRA_SWGROUP_DCB, + TEGRA_SWGROUP_G2, + TEGRA_SWGROUP_NV, }; static const struct tegra_smmu_group_soc tegra114_groups[] = { { - .name = "display", - .swgroups = tegra114_group_display, - .num_swgroups = ARRAY_SIZE(tegra114_group_display), + .name = "drm", + .swgroups = tegra114_group_drm, + .num_swgroups = ARRAY_SIZE(tegra114_group_drm), }, }; diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index 5d0ccb2be206..493b5dc3a4b3 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -10,26 +10,6 @@ #include "mc.h" -#define MC_EMEM_ARB_CFG 0x90 -#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94 -#define MC_EMEM_ARB_TIMING_RCD 0x98 -#define MC_EMEM_ARB_TIMING_RP 0x9c -#define MC_EMEM_ARB_TIMING_RC 0xa0 -#define MC_EMEM_ARB_TIMING_RAS 0xa4 -#define MC_EMEM_ARB_TIMING_FAW 0xa8 -#define MC_EMEM_ARB_TIMING_RRD 0xac -#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0 -#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4 -#define MC_EMEM_ARB_TIMING_R2R 0xb8 -#define MC_EMEM_ARB_TIMING_W2W 0xbc -#define MC_EMEM_ARB_TIMING_R2W 0xc0 -#define MC_EMEM_ARB_TIMING_W2R 0xc4 -#define MC_EMEM_ARB_DA_TURNS 0xd0 -#define MC_EMEM_ARB_DA_COVERS 0xd4 -#define MC_EMEM_ARB_MISC0 0xd8 -#define MC_EMEM_ARB_MISC1 0xdc -#define MC_EMEM_ARB_RING1_THROTTLE 0xe0 - static const struct tegra_mc_client tegra124_mc_clients[] = { { .id = 0x00, @@ -974,16 +954,18 @@ static const struct tegra_smmu_swgroup tegra124_swgroups[] = { { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 }, }; -static const unsigned int tegra124_group_display[] = { +static const unsigned int tegra124_group_drm[] = { TEGRA_SWGROUP_DC, TEGRA_SWGROUP_DCB, + TEGRA_SWGROUP_GPU, + TEGRA_SWGROUP_VIC, }; static const struct tegra_smmu_group_soc tegra124_groups[] = { { - .name = "display", - .swgroups = tegra124_group_display, - .num_swgroups = ARRAY_SIZE(tegra124_group_display), + .name = "drm", + .swgroups = tegra124_group_drm, + .num_swgroups = ARRAY_SIZE(tegra124_group_drm), }, }; diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c index 9ee5bef49e47..1b23b1c34476 100644 --- a/drivers/memory/tegra/tegra20-emc.c +++ b/drivers/memory/tegra/tegra20-emc.c @@ -6,10 +6,11 @@ */ #include <linux/clk.h> +#include <linux/clk/tegra.h> #include <linux/completion.h> #include <linux/err.h> #include <linux/interrupt.h> -#include <linux/iopoll.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> @@ -21,6 +22,7 @@ #define EMC_INTSTATUS 0x000 #define EMC_INTMASK 0x004 +#define EMC_DBG 0x008 #define EMC_TIMING_CONTROL 0x028 #define EMC_RC 0x02c #define EMC_RFC 0x030 @@ -79,6 +81,12 @@ #define EMC_REFRESH_OVERFLOW_INT BIT(3) #define EMC_CLKCHANGE_COMPLETE_INT BIT(4) +#define EMC_DBG_READ_MUX_ASSEMBLY BIT(0) +#define EMC_DBG_WRITE_MUX_ACTIVE BIT(1) +#define EMC_DBG_FORCE_UPDATE BIT(2) +#define EMC_DBG_READ_DQM_CTRL BIT(9) +#define EMC_DBG_CFG_PRIORITY BIT(24) + static const u16 emc_timing_registers[] = { EMC_RC, EMC_RFC, @@ -137,9 +145,6 @@ struct tegra_emc { struct device *dev; struct completion clk_handshake_complete; struct notifier_block clk_nb; - struct clk *backup_clk; - struct clk *emc_mux; - struct clk *pll_m; struct clk *clk; void __iomem *regs; @@ -219,7 +224,7 @@ static int emc_prepare_timing_change(struct tegra_emc *emc, unsigned long rate) static int emc_complete_timing_change(struct tegra_emc *emc, bool flush) { - long timeout; + unsigned long timeout; dev_dbg(emc->dev, "%s: flush %d\n", __func__, flush); @@ -231,14 +236,10 @@ static int emc_complete_timing_change(struct tegra_emc *emc, bool flush) } timeout = wait_for_completion_timeout(&emc->clk_handshake_complete, - usecs_to_jiffies(100)); + msecs_to_jiffies(100)); if (timeout == 0) { dev_err(emc->dev, "EMC-CAR handshake failed\n"); return -EIO; - } else if (timeout < 0) { - dev_err(emc->dev, "failed to wait for EMC-CAR handshake: %ld\n", - timeout); - return timeout; } return 0; @@ -363,6 +364,13 @@ static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc, sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings, NULL); + dev_info(emc->dev, + "got %u timings for RAM code %u (min %luMHz max %luMHz)\n", + emc->num_timings, + tegra_read_ram_code(), + emc->timings[0].rate / 1000000, + emc->timings[emc->num_timings - 1].rate / 1000000); + return 0; } @@ -398,7 +406,7 @@ tegra_emc_find_node_by_ram_code(struct device *dev) static int emc_setup_hw(struct tegra_emc *emc) { u32 intmask = EMC_REFRESH_OVERFLOW_INT | EMC_CLKCHANGE_COMPLETE_INT; - u32 emc_cfg; + u32 emc_cfg, emc_dbg; emc_cfg = readl_relaxed(emc->regs + EMC_CFG_2); @@ -421,42 +429,53 @@ static int emc_setup_hw(struct tegra_emc *emc) writel_relaxed(intmask, emc->regs + EMC_INTMASK); writel_relaxed(intmask, emc->regs + EMC_INTSTATUS); + /* ensure that unwanted debug features are disabled */ + emc_dbg = readl_relaxed(emc->regs + EMC_DBG); + emc_dbg |= EMC_DBG_CFG_PRIORITY; + emc_dbg &= ~EMC_DBG_READ_MUX_ASSEMBLY; + emc_dbg &= ~EMC_DBG_WRITE_MUX_ACTIVE; + emc_dbg &= ~EMC_DBG_FORCE_UPDATE; + writel_relaxed(emc_dbg, emc->regs + EMC_DBG); + return 0; } -static int emc_init(struct tegra_emc *emc, unsigned long rate) +static long emc_round_rate(unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + void *arg) { - int err; + struct emc_timing *timing = NULL; + struct tegra_emc *emc = arg; + unsigned int i; - err = clk_set_parent(emc->emc_mux, emc->backup_clk); - if (err) { - dev_err(emc->dev, - "failed to reparent to backup source: %d\n", err); - return err; - } + min_rate = min(min_rate, emc->timings[emc->num_timings - 1].rate); - err = clk_set_rate(emc->pll_m, rate); - if (err) { - dev_err(emc->dev, - "failed to change pll_m rate: %d\n", err); - return err; - } + for (i = 0; i < emc->num_timings; i++) { + if (emc->timings[i].rate < rate && i != emc->num_timings - 1) + continue; - err = clk_set_parent(emc->emc_mux, emc->pll_m); - if (err) { - dev_err(emc->dev, - "failed to reparent to pll_m: %d\n", err); - return err; + if (emc->timings[i].rate > max_rate) { + i = max(i, 1u) - 1; + + if (emc->timings[i].rate < min_rate) + break; + } + + if (emc->timings[i].rate < min_rate) + continue; + + timing = &emc->timings[i]; + break; } - err = clk_set_rate(emc->clk, rate); - if (err) { - dev_err(emc->dev, - "failed to change emc rate: %d\n", err); - return err; + if (!timing) { + dev_err(emc->dev, "no timing for rate %lu min %lu max %lu\n", + rate, min_rate, max_rate); + return -EINVAL; } - return 0; + return timing->rate; } static int tegra_emc_probe(struct platform_device *pdev) @@ -515,57 +534,26 @@ static int tegra_emc_probe(struct platform_device *pdev) return err; } + tegra20_clk_set_emc_round_callback(emc_round_rate, emc); + emc->clk = devm_clk_get(&pdev->dev, "emc"); if (IS_ERR(emc->clk)) { err = PTR_ERR(emc->clk); dev_err(&pdev->dev, "failed to get emc clock: %d\n", err); - return err; - } - - emc->pll_m = clk_get_sys(NULL, "pll_m"); - if (IS_ERR(emc->pll_m)) { - err = PTR_ERR(emc->pll_m); - dev_err(&pdev->dev, "failed to get pll_m clock: %d\n", err); - return err; - } - - emc->backup_clk = clk_get_sys(NULL, "pll_p"); - if (IS_ERR(emc->backup_clk)) { - err = PTR_ERR(emc->backup_clk); - dev_err(&pdev->dev, "failed to get pll_p clock: %d\n", err); - goto put_pll_m; - } - - emc->emc_mux = clk_get_parent(emc->clk); - if (IS_ERR(emc->emc_mux)) { - err = PTR_ERR(emc->emc_mux); - dev_err(&pdev->dev, "failed to get emc_mux clock: %d\n", err); - goto put_backup; + goto unset_cb; } err = clk_notifier_register(emc->clk, &emc->clk_nb); if (err) { dev_err(&pdev->dev, "failed to register clk notifier: %d\n", err); - goto put_backup; - } - - /* set DRAM clock rate to maximum */ - err = emc_init(emc, emc->timings[emc->num_timings - 1].rate); - if (err) { - dev_err(&pdev->dev, "failed to initialize EMC clock rate: %d\n", - err); - goto unreg_notifier; + goto unset_cb; } return 0; -unreg_notifier: - clk_notifier_unregister(emc->clk, &emc->clk_nb); -put_backup: - clk_put(emc->backup_clk); -put_pll_m: - clk_put(emc->pll_m); +unset_cb: + tegra20_clk_set_emc_round_callback(NULL, NULL); return err; } diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c new file mode 100644 index 000000000000..6929980bf907 --- /dev/null +++ b/drivers/memory/tegra/tegra30-emc.c @@ -0,0 +1,1232 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Tegra30 External Memory Controller driver + * + * Based on downstream driver from NVIDIA and tegra124-emc.c + * Copyright (C) 2011-2014 NVIDIA Corporation + * + * Author: Dmitry Osipenko <digetx@gmail.com> + * Copyright (C) 2019 GRATE-DRIVER project + */ + +#include <linux/clk.h> +#include <linux/clk/tegra.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/sort.h> +#include <linux/types.h> + +#include <soc/tegra/fuse.h> + +#include "mc.h" + +#define EMC_INTSTATUS 0x000 +#define EMC_INTMASK 0x004 +#define EMC_DBG 0x008 +#define EMC_CFG 0x00c +#define EMC_REFCTRL 0x020 +#define EMC_TIMING_CONTROL 0x028 +#define EMC_RC 0x02c +#define EMC_RFC 0x030 +#define EMC_RAS 0x034 +#define EMC_RP 0x038 +#define EMC_R2W 0x03c +#define EMC_W2R 0x040 +#define EMC_R2P 0x044 +#define EMC_W2P 0x048 +#define EMC_RD_RCD 0x04c +#define EMC_WR_RCD 0x050 +#define EMC_RRD 0x054 +#define EMC_REXT 0x058 +#define EMC_WDV 0x05c +#define EMC_QUSE 0x060 +#define EMC_QRST 0x064 +#define EMC_QSAFE 0x068 +#define EMC_RDV 0x06c +#define EMC_REFRESH 0x070 +#define EMC_BURST_REFRESH_NUM 0x074 +#define EMC_PDEX2WR 0x078 +#define EMC_PDEX2RD 0x07c +#define EMC_PCHG2PDEN 0x080 +#define EMC_ACT2PDEN 0x084 +#define EMC_AR2PDEN 0x088 +#define EMC_RW2PDEN 0x08c +#define EMC_TXSR 0x090 +#define EMC_TCKE 0x094 +#define EMC_TFAW 0x098 +#define EMC_TRPAB 0x09c +#define EMC_TCLKSTABLE 0x0a0 +#define EMC_TCLKSTOP 0x0a4 +#define EMC_TREFBW 0x0a8 +#define EMC_QUSE_EXTRA 0x0ac +#define EMC_ODT_WRITE 0x0b0 +#define EMC_ODT_READ 0x0b4 +#define EMC_WEXT 0x0b8 +#define EMC_CTT 0x0bc +#define EMC_MRS_WAIT_CNT 0x0c8 +#define EMC_MRS 0x0cc +#define EMC_EMRS 0x0d0 +#define EMC_SELF_REF 0x0e0 +#define EMC_MRW 0x0e8 +#define EMC_XM2DQSPADCTRL3 0x0f8 +#define EMC_FBIO_SPARE 0x100 +#define EMC_FBIO_CFG5 0x104 +#define EMC_FBIO_CFG6 0x114 +#define EMC_CFG_RSV 0x120 +#define EMC_AUTO_CAL_CONFIG 0x2a4 +#define EMC_AUTO_CAL_INTERVAL 0x2a8 +#define EMC_AUTO_CAL_STATUS 0x2ac +#define EMC_STATUS 0x2b4 +#define EMC_CFG_2 0x2b8 +#define EMC_CFG_DIG_DLL 0x2bc +#define EMC_CFG_DIG_DLL_PERIOD 0x2c0 +#define EMC_CTT_DURATION 0x2d8 +#define EMC_CTT_TERM_CTRL 0x2dc +#define EMC_ZCAL_INTERVAL 0x2e0 +#define EMC_ZCAL_WAIT_CNT 0x2e4 +#define EMC_ZQ_CAL 0x2ec +#define EMC_XM2CMDPADCTRL 0x2f0 +#define EMC_XM2DQSPADCTRL2 0x2fc +#define EMC_XM2DQPADCTRL2 0x304 +#define EMC_XM2CLKPADCTRL 0x308 +#define EMC_XM2COMPPADCTRL 0x30c +#define EMC_XM2VTTGENPADCTRL 0x310 +#define EMC_XM2VTTGENPADCTRL2 0x314 +#define EMC_XM2QUSEPADCTRL 0x318 +#define EMC_DLL_XFORM_DQS0 0x328 +#define EMC_DLL_XFORM_DQS1 0x32c +#define EMC_DLL_XFORM_DQS2 0x330 +#define EMC_DLL_XFORM_DQS3 0x334 +#define EMC_DLL_XFORM_DQS4 0x338 +#define EMC_DLL_XFORM_DQS5 0x33c +#define EMC_DLL_XFORM_DQS6 0x340 +#define EMC_DLL_XFORM_DQS7 0x344 +#define EMC_DLL_XFORM_QUSE0 0x348 +#define EMC_DLL_XFORM_QUSE1 0x34c +#define EMC_DLL_XFORM_QUSE2 0x350 +#define EMC_DLL_XFORM_QUSE3 0x354 +#define EMC_DLL_XFORM_QUSE4 0x358 +#define EMC_DLL_XFORM_QUSE5 0x35c +#define EMC_DLL_XFORM_QUSE6 0x360 +#define EMC_DLL_XFORM_QUSE7 0x364 +#define EMC_DLL_XFORM_DQ0 0x368 +#define EMC_DLL_XFORM_DQ1 0x36c +#define EMC_DLL_XFORM_DQ2 0x370 +#define EMC_DLL_XFORM_DQ3 0x374 +#define EMC_DLI_TRIM_TXDQS0 0x3a8 +#define EMC_DLI_TRIM_TXDQS1 0x3ac +#define EMC_DLI_TRIM_TXDQS2 0x3b0 +#define EMC_DLI_TRIM_TXDQS3 0x3b4 +#define EMC_DLI_TRIM_TXDQS4 0x3b8 +#define EMC_DLI_TRIM_TXDQS5 0x3bc +#define EMC_DLI_TRIM_TXDQS6 0x3c0 +#define EMC_DLI_TRIM_TXDQS7 0x3c4 +#define EMC_STALL_THEN_EXE_BEFORE_CLKCHANGE 0x3c8 +#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE 0x3cc +#define EMC_UNSTALL_RW_AFTER_CLKCHANGE 0x3d0 +#define EMC_SEL_DPD_CTRL 0x3d8 +#define EMC_PRE_REFRESH_REQ_CNT 0x3dc +#define EMC_DYN_SELF_REF_CONTROL 0x3e0 +#define EMC_TXSRDLL 0x3e4 + +#define EMC_STATUS_TIMING_UPDATE_STALLED BIT(23) + +#define EMC_MODE_SET_DLL_RESET BIT(8) +#define EMC_MODE_SET_LONG_CNT BIT(26) + +#define EMC_SELF_REF_CMD_ENABLED BIT(0) + +#define DRAM_DEV_SEL_ALL (0 << 30) +#define DRAM_DEV_SEL_0 (2 << 30) +#define DRAM_DEV_SEL_1 (1 << 30) +#define DRAM_BROADCAST(num) \ + ((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0) + +#define EMC_ZQ_CAL_CMD BIT(0) +#define EMC_ZQ_CAL_LONG BIT(4) +#define EMC_ZQ_CAL_LONG_CMD_DEV0 \ + (DRAM_DEV_SEL_0 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD) +#define EMC_ZQ_CAL_LONG_CMD_DEV1 \ + (DRAM_DEV_SEL_1 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD) + +#define EMC_DBG_READ_MUX_ASSEMBLY BIT(0) +#define EMC_DBG_WRITE_MUX_ACTIVE BIT(1) +#define EMC_DBG_FORCE_UPDATE BIT(2) +#define EMC_DBG_CFG_PRIORITY BIT(24) + +#define EMC_CFG5_QUSE_MODE_SHIFT 13 +#define EMC_CFG5_QUSE_MODE_MASK (7 << EMC_CFG5_QUSE_MODE_SHIFT) + +#define EMC_CFG5_QUSE_MODE_INTERNAL_LPBK 2 +#define EMC_CFG5_QUSE_MODE_PULSE_INTERN 3 + +#define EMC_SEL_DPD_CTRL_QUSE_DPD_ENABLE BIT(9) + +#define EMC_XM2COMPPADCTRL_VREF_CAL_ENABLE BIT(10) + +#define EMC_XM2QUSEPADCTRL_IVREF_ENABLE BIT(4) + +#define EMC_XM2DQSPADCTRL2_VREF_ENABLE BIT(5) +#define EMC_XM2DQSPADCTRL3_VREF_ENABLE BIT(5) + +#define EMC_AUTO_CAL_STATUS_ACTIVE BIT(31) + +#define EMC_FBIO_CFG5_DRAM_TYPE_MASK 0x3 + +#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK 0x3ff +#define EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT 16 +#define EMC_MRS_WAIT_CNT_LONG_WAIT_MASK \ + (0x3ff << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT) + +#define EMC_REFCTRL_DEV_SEL_MASK 0x3 +#define EMC_REFCTRL_ENABLE BIT(31) +#define EMC_REFCTRL_ENABLE_ALL(num) \ + (((num) > 1 ? 0 : 2) | EMC_REFCTRL_ENABLE) +#define EMC_REFCTRL_DISABLE_ALL(num) ((num) > 1 ? 0 : 2) + +#define EMC_CFG_PERIODIC_QRST BIT(21) +#define EMC_CFG_DYN_SREF_ENABLE BIT(28) + +#define EMC_CLKCHANGE_REQ_ENABLE BIT(0) +#define EMC_CLKCHANGE_PD_ENABLE BIT(1) +#define EMC_CLKCHANGE_SR_ENABLE BIT(2) + +#define EMC_TIMING_UPDATE BIT(0) + +#define EMC_REFRESH_OVERFLOW_INT BIT(3) +#define EMC_CLKCHANGE_COMPLETE_INT BIT(4) + +enum emc_dram_type { + DRAM_TYPE_DDR3, + DRAM_TYPE_DDR1, + DRAM_TYPE_LPDDR2, + DRAM_TYPE_DDR2, +}; + +enum emc_dll_change { + DLL_CHANGE_NONE, + DLL_CHANGE_ON, + DLL_CHANGE_OFF +}; + +static const u16 emc_timing_registers[] = { + [0] = EMC_RC, + [1] = EMC_RFC, + [2] = EMC_RAS, + [3] = EMC_RP, + [4] = EMC_R2W, + [5] = EMC_W2R, + [6] = EMC_R2P, + [7] = EMC_W2P, + [8] = EMC_RD_RCD, + [9] = EMC_WR_RCD, + [10] = EMC_RRD, + [11] = EMC_REXT, + [12] = EMC_WEXT, + [13] = EMC_WDV, + [14] = EMC_QUSE, + [15] = EMC_QRST, + [16] = EMC_QSAFE, + [17] = EMC_RDV, + [18] = EMC_REFRESH, + [19] = EMC_BURST_REFRESH_NUM, + [20] = EMC_PRE_REFRESH_REQ_CNT, + [21] = EMC_PDEX2WR, + [22] = EMC_PDEX2RD, + [23] = EMC_PCHG2PDEN, + [24] = EMC_ACT2PDEN, + [25] = EMC_AR2PDEN, + [26] = EMC_RW2PDEN, + [27] = EMC_TXSR, + [28] = EMC_TXSRDLL, + [29] = EMC_TCKE, + [30] = EMC_TFAW, + [31] = EMC_TRPAB, + [32] = EMC_TCLKSTABLE, + [33] = EMC_TCLKSTOP, + [34] = EMC_TREFBW, + [35] = EMC_QUSE_EXTRA, + [36] = EMC_FBIO_CFG6, + [37] = EMC_ODT_WRITE, + [38] = EMC_ODT_READ, + [39] = EMC_FBIO_CFG5, + [40] = EMC_CFG_DIG_DLL, + [41] = EMC_CFG_DIG_DLL_PERIOD, + [42] = EMC_DLL_XFORM_DQS0, + [43] = EMC_DLL_XFORM_DQS1, + [44] = EMC_DLL_XFORM_DQS2, + [45] = EMC_DLL_XFORM_DQS3, + [46] = EMC_DLL_XFORM_DQS4, + [47] = EMC_DLL_XFORM_DQS5, + [48] = EMC_DLL_XFORM_DQS6, + [49] = EMC_DLL_XFORM_DQS7, + [50] = EMC_DLL_XFORM_QUSE0, + [51] = EMC_DLL_XFORM_QUSE1, + [52] = EMC_DLL_XFORM_QUSE2, + [53] = EMC_DLL_XFORM_QUSE3, + [54] = EMC_DLL_XFORM_QUSE4, + [55] = EMC_DLL_XFORM_QUSE5, + [56] = EMC_DLL_XFORM_QUSE6, + [57] = EMC_DLL_XFORM_QUSE7, + [58] = EMC_DLI_TRIM_TXDQS0, + [59] = EMC_DLI_TRIM_TXDQS1, + [60] = EMC_DLI_TRIM_TXDQS2, + [61] = EMC_DLI_TRIM_TXDQS3, + [62] = EMC_DLI_TRIM_TXDQS4, + [63] = EMC_DLI_TRIM_TXDQS5, + [64] = EMC_DLI_TRIM_TXDQS6, + [65] = EMC_DLI_TRIM_TXDQS7, + [66] = EMC_DLL_XFORM_DQ0, + [67] = EMC_DLL_XFORM_DQ1, + [68] = EMC_DLL_XFORM_DQ2, + [69] = EMC_DLL_XFORM_DQ3, + [70] = EMC_XM2CMDPADCTRL, + [71] = EMC_XM2DQSPADCTRL2, + [72] = EMC_XM2DQPADCTRL2, + [73] = EMC_XM2CLKPADCTRL, + [74] = EMC_XM2COMPPADCTRL, + [75] = EMC_XM2VTTGENPADCTRL, + [76] = EMC_XM2VTTGENPADCTRL2, + [77] = EMC_XM2QUSEPADCTRL, + [78] = EMC_XM2DQSPADCTRL3, + [79] = EMC_CTT_TERM_CTRL, + [80] = EMC_ZCAL_INTERVAL, + [81] = EMC_ZCAL_WAIT_CNT, + [82] = EMC_MRS_WAIT_CNT, + [83] = EMC_AUTO_CAL_CONFIG, + [84] = EMC_CTT, + [85] = EMC_CTT_DURATION, + [86] = EMC_DYN_SELF_REF_CONTROL, + [87] = EMC_FBIO_SPARE, + [88] = EMC_CFG_RSV, +}; + +struct emc_timing { + unsigned long rate; + + u32 data[ARRAY_SIZE(emc_timing_registers)]; + + u32 emc_auto_cal_interval; + u32 emc_mode_1; + u32 emc_mode_2; + u32 emc_mode_reset; + u32 emc_zcal_cnt_long; + bool emc_cfg_periodic_qrst; + bool emc_cfg_dyn_self_ref; +}; + +struct tegra_emc { + struct device *dev; + struct tegra_mc *mc; + struct completion clk_handshake_complete; + struct notifier_block clk_nb; + struct clk *clk; + void __iomem *regs; + unsigned int irq; + + struct emc_timing *timings; + unsigned int num_timings; + + u32 mc_override; + u32 emc_cfg; + + u32 emc_mode_1; + u32 emc_mode_2; + u32 emc_mode_reset; + + bool vref_cal_toggle : 1; + bool zcal_long : 1; + bool dll_on : 1; + bool prepared : 1; + bool bad_state : 1; +}; + +static irqreturn_t tegra_emc_isr(int irq, void *data) +{ + struct tegra_emc *emc = data; + u32 intmask = EMC_REFRESH_OVERFLOW_INT | EMC_CLKCHANGE_COMPLETE_INT; + u32 status; + + status = readl_relaxed(emc->regs + EMC_INTSTATUS) & intmask; + if (!status) + return IRQ_NONE; + + /* notify about EMC-CAR handshake completion */ + if (status & EMC_CLKCHANGE_COMPLETE_INT) + complete(&emc->clk_handshake_complete); + + /* notify about HW problem */ + if (status & EMC_REFRESH_OVERFLOW_INT) + dev_err_ratelimited(emc->dev, + "refresh request overflow timeout\n"); + + /* clear interrupts */ + writel_relaxed(status, emc->regs + EMC_INTSTATUS); + + return IRQ_HANDLED; +} + +static struct emc_timing *emc_find_timing(struct tegra_emc *emc, + unsigned long rate) +{ + struct emc_timing *timing = NULL; + unsigned int i; + + for (i = 0; i < emc->num_timings; i++) { + if (emc->timings[i].rate >= rate) { + timing = &emc->timings[i]; + break; + } + } + + if (!timing) { + dev_err(emc->dev, "no timing for rate %lu\n", rate); + return NULL; + } + + return timing; +} + +static bool emc_dqs_preset(struct tegra_emc *emc, struct emc_timing *timing, + bool *schmitt_to_vref) +{ + bool preset = false; + u32 val; + + if (timing->data[71] & EMC_XM2DQSPADCTRL2_VREF_ENABLE) { + val = readl_relaxed(emc->regs + EMC_XM2DQSPADCTRL2); + + if (!(val & EMC_XM2DQSPADCTRL2_VREF_ENABLE)) { + val |= EMC_XM2DQSPADCTRL2_VREF_ENABLE; + writel_relaxed(val, emc->regs + EMC_XM2DQSPADCTRL2); + + preset = true; + } + } + + if (timing->data[78] & EMC_XM2DQSPADCTRL3_VREF_ENABLE) { + val = readl_relaxed(emc->regs + EMC_XM2DQSPADCTRL3); + + if (!(val & EMC_XM2DQSPADCTRL3_VREF_ENABLE)) { + val |= EMC_XM2DQSPADCTRL3_VREF_ENABLE; + writel_relaxed(val, emc->regs + EMC_XM2DQSPADCTRL3); + + preset = true; + } + } + + if (timing->data[77] & EMC_XM2QUSEPADCTRL_IVREF_ENABLE) { + val = readl_relaxed(emc->regs + EMC_XM2QUSEPADCTRL); + + if (!(val & EMC_XM2QUSEPADCTRL_IVREF_ENABLE)) { + val |= EMC_XM2QUSEPADCTRL_IVREF_ENABLE; + writel_relaxed(val, emc->regs + EMC_XM2QUSEPADCTRL); + + *schmitt_to_vref = true; + preset = true; + } + } + + return preset; +} + +static int emc_seq_update_timing(struct tegra_emc *emc) +{ + u32 val; + int err; + + writel_relaxed(EMC_TIMING_UPDATE, emc->regs + EMC_TIMING_CONTROL); + + err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_STATUS, val, + !(val & EMC_STATUS_TIMING_UPDATE_STALLED), + 1, 200); + if (err) { + dev_err(emc->dev, "failed to update timing: %d\n", err); + return err; + } + + return 0; +} + +static int emc_prepare_mc_clk_cfg(struct tegra_emc *emc, unsigned long rate) +{ + struct tegra_mc *mc = emc->mc; + unsigned int misc0_index = 16; + unsigned int i; + bool same; + + for (i = 0; i < mc->num_timings; i++) { + if (mc->timings[i].rate != rate) + continue; + + if (mc->timings[i].emem_data[misc0_index] & BIT(27)) + same = true; + else + same = false; + + return tegra20_clk_prepare_emc_mc_same_freq(emc->clk, same); + } + + return -EINVAL; +} + +static int emc_prepare_timing_change(struct tegra_emc *emc, unsigned long rate) +{ + struct emc_timing *timing = emc_find_timing(emc, rate); + enum emc_dll_change dll_change; + enum emc_dram_type dram_type; + bool schmitt_to_vref = false; + unsigned int pre_wait = 0; + bool qrst_used = false; + unsigned int dram_num; + unsigned int i; + u32 fbio_cfg5; + u32 emc_dbg; + u32 val; + int err; + + if (!timing || emc->bad_state) + return -EINVAL; + + dev_dbg(emc->dev, "%s: using timing rate %lu for requested rate %lu\n", + __func__, timing->rate, rate); + + emc->bad_state = true; + + err = emc_prepare_mc_clk_cfg(emc, rate); + if (err) { + dev_err(emc->dev, "mc clock preparation failed: %d\n", err); + return err; + } + + emc->vref_cal_toggle = false; + emc->mc_override = mc_readl(emc->mc, MC_EMEM_ARB_OVERRIDE); + emc->emc_cfg = readl_relaxed(emc->regs + EMC_CFG); + emc_dbg = readl_relaxed(emc->regs + EMC_DBG); + + if (emc->dll_on == !!(timing->emc_mode_1 & 0x1)) + dll_change = DLL_CHANGE_NONE; + else if (timing->emc_mode_1 & 0x1) + dll_change = DLL_CHANGE_ON; + else + dll_change = DLL_CHANGE_OFF; + + emc->dll_on = !!(timing->emc_mode_1 & 0x1); + + if (timing->data[80] && !readl_relaxed(emc->regs + EMC_ZCAL_INTERVAL)) + emc->zcal_long = true; + else + emc->zcal_long = false; + + fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5); + dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK; + + dram_num = tegra_mc_get_emem_device_count(emc->mc); + + /* disable dynamic self-refresh */ + if (emc->emc_cfg & EMC_CFG_DYN_SREF_ENABLE) { + emc->emc_cfg &= ~EMC_CFG_DYN_SREF_ENABLE; + writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG); + + pre_wait = 5; + } + + /* update MC arbiter settings */ + val = mc_readl(emc->mc, MC_EMEM_ARB_OUTSTANDING_REQ); + if (!(val & MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE) || + ((val & MC_EMEM_ARB_OUTSTANDING_REQ_MAX_MASK) > 0x50)) { + + val = MC_EMEM_ARB_OUTSTANDING_REQ_LIMIT_ENABLE | + MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE | 0x50; + mc_writel(emc->mc, val, MC_EMEM_ARB_OUTSTANDING_REQ); + mc_writel(emc->mc, MC_TIMING_UPDATE, MC_TIMING_CONTROL); + } + + if (emc->mc_override & MC_EMEM_ARB_OVERRIDE_EACK_MASK) + mc_writel(emc->mc, + emc->mc_override & ~MC_EMEM_ARB_OVERRIDE_EACK_MASK, + MC_EMEM_ARB_OVERRIDE); + + /* check DQ/DQS VREF delay */ + if (emc_dqs_preset(emc, timing, &schmitt_to_vref)) { + if (pre_wait < 3) + pre_wait = 3; + } + + if (pre_wait) { + err = emc_seq_update_timing(emc); + if (err) + return err; + + udelay(pre_wait); + } + + /* disable auto-calibration if VREF mode is switching */ + if (timing->emc_auto_cal_interval) { + val = readl_relaxed(emc->regs + EMC_XM2COMPPADCTRL); + val ^= timing->data[74]; + + if (val & EMC_XM2COMPPADCTRL_VREF_CAL_ENABLE) { + writel_relaxed(0, emc->regs + EMC_AUTO_CAL_INTERVAL); + + err = readl_relaxed_poll_timeout_atomic( + emc->regs + EMC_AUTO_CAL_STATUS, val, + !(val & EMC_AUTO_CAL_STATUS_ACTIVE), 1, 300); + if (err) { + dev_err(emc->dev, + "failed to disable auto-cal: %d\n", + err); + return err; + } + + emc->vref_cal_toggle = true; + } + } + + /* program shadow registers */ + for (i = 0; i < ARRAY_SIZE(timing->data); i++) { + /* EMC_XM2CLKPADCTRL should be programmed separately */ + if (i != 73) + writel_relaxed(timing->data[i], + emc->regs + emc_timing_registers[i]); + } + + err = tegra_mc_write_emem_configuration(emc->mc, timing->rate); + if (err) + return err; + + /* DDR3: predict MRS long wait count */ + if (dram_type == DRAM_TYPE_DDR3 && dll_change == DLL_CHANGE_ON) { + u32 cnt = 512; + + if (emc->zcal_long) + cnt -= dram_num * 256; + + val = timing->data[82] & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK; + if (cnt < val) + cnt = val; + + val = timing->data[82] & ~EMC_MRS_WAIT_CNT_LONG_WAIT_MASK; + val |= (cnt << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT) & + EMC_MRS_WAIT_CNT_LONG_WAIT_MASK; + + writel_relaxed(val, emc->regs + EMC_MRS_WAIT_CNT); + } + + /* disable interrupt since read access is prohibited after stalling */ + disable_irq(emc->irq); + + /* this read also completes the writes */ + val = readl_relaxed(emc->regs + EMC_SEL_DPD_CTRL); + + if (!(val & EMC_SEL_DPD_CTRL_QUSE_DPD_ENABLE) && schmitt_to_vref) { + u32 cur_mode, new_mode; + + cur_mode = fbio_cfg5 & EMC_CFG5_QUSE_MODE_MASK; + cur_mode >>= EMC_CFG5_QUSE_MODE_SHIFT; + + new_mode = timing->data[39] & EMC_CFG5_QUSE_MODE_MASK; + new_mode >>= EMC_CFG5_QUSE_MODE_SHIFT; + + if ((cur_mode != EMC_CFG5_QUSE_MODE_PULSE_INTERN && + cur_mode != EMC_CFG5_QUSE_MODE_INTERNAL_LPBK) || + (new_mode != EMC_CFG5_QUSE_MODE_PULSE_INTERN && + new_mode != EMC_CFG5_QUSE_MODE_INTERNAL_LPBK)) + qrst_used = true; + } + + /* flow control marker 1 */ + writel_relaxed(0x1, emc->regs + EMC_STALL_THEN_EXE_BEFORE_CLKCHANGE); + + /* enable periodic reset */ + if (qrst_used) { + writel_relaxed(emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE, + emc->regs + EMC_DBG); + writel_relaxed(emc->emc_cfg | EMC_CFG_PERIODIC_QRST, + emc->regs + EMC_CFG); + writel_relaxed(emc_dbg, emc->regs + EMC_DBG); + } + + /* disable auto-refresh to save time after clock change */ + writel_relaxed(EMC_REFCTRL_DISABLE_ALL(dram_num), + emc->regs + EMC_REFCTRL); + + /* turn off DLL and enter self-refresh on DDR3 */ + if (dram_type == DRAM_TYPE_DDR3) { + if (dll_change == DLL_CHANGE_OFF) + writel_relaxed(timing->emc_mode_1, + emc->regs + EMC_EMRS); + + writel_relaxed(DRAM_BROADCAST(dram_num) | + EMC_SELF_REF_CMD_ENABLED, + emc->regs + EMC_SELF_REF); + } + + /* flow control marker 2 */ + writel_relaxed(0x1, emc->regs + EMC_STALL_THEN_EXE_AFTER_CLKCHANGE); + + /* enable write-active MUX, update unshadowed pad control */ + writel_relaxed(emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE, emc->regs + EMC_DBG); + writel_relaxed(timing->data[73], emc->regs + EMC_XM2CLKPADCTRL); + + /* restore periodic QRST and disable write-active MUX */ + val = !!(emc->emc_cfg & EMC_CFG_PERIODIC_QRST); + if (qrst_used || timing->emc_cfg_periodic_qrst != val) { + if (timing->emc_cfg_periodic_qrst) + emc->emc_cfg |= EMC_CFG_PERIODIC_QRST; + else + emc->emc_cfg &= ~EMC_CFG_PERIODIC_QRST; + + writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG); + } + writel_relaxed(emc_dbg, emc->regs + EMC_DBG); + + /* exit self-refresh on DDR3 */ + if (dram_type == DRAM_TYPE_DDR3) + writel_relaxed(DRAM_BROADCAST(dram_num), + emc->regs + EMC_SELF_REF); + + /* set DRAM-mode registers */ + if (dram_type == DRAM_TYPE_DDR3) { + if (timing->emc_mode_1 != emc->emc_mode_1) + writel_relaxed(timing->emc_mode_1, + emc->regs + EMC_EMRS); + + if (timing->emc_mode_2 != emc->emc_mode_2) + writel_relaxed(timing->emc_mode_2, + emc->regs + EMC_EMRS); + + if (timing->emc_mode_reset != emc->emc_mode_reset || + dll_change == DLL_CHANGE_ON) { + val = timing->emc_mode_reset; + if (dll_change == DLL_CHANGE_ON) { + val |= EMC_MODE_SET_DLL_RESET; + val |= EMC_MODE_SET_LONG_CNT; + } else { + val &= ~EMC_MODE_SET_DLL_RESET; + } + writel_relaxed(val, emc->regs + EMC_MRS); + } + } else { + if (timing->emc_mode_2 != emc->emc_mode_2) + writel_relaxed(timing->emc_mode_2, + emc->regs + EMC_MRW); + + if (timing->emc_mode_1 != emc->emc_mode_1) + writel_relaxed(timing->emc_mode_1, + emc->regs + EMC_MRW); + } + + emc->emc_mode_1 = timing->emc_mode_1; + emc->emc_mode_2 = timing->emc_mode_2; + emc->emc_mode_reset = timing->emc_mode_reset; + + /* issue ZCAL command if turning ZCAL on */ + if (emc->zcal_long) { + writel_relaxed(EMC_ZQ_CAL_LONG_CMD_DEV0, + emc->regs + EMC_ZQ_CAL); + + if (dram_num > 1) + writel_relaxed(EMC_ZQ_CAL_LONG_CMD_DEV1, + emc->regs + EMC_ZQ_CAL); + } + + /* re-enable auto-refresh */ + writel_relaxed(EMC_REFCTRL_ENABLE_ALL(dram_num), + emc->regs + EMC_REFCTRL); + + /* flow control marker 3 */ + writel_relaxed(0x1, emc->regs + EMC_UNSTALL_RW_AFTER_CLKCHANGE); + + reinit_completion(&emc->clk_handshake_complete); + + /* interrupt can be re-enabled now */ + enable_irq(emc->irq); + + emc->bad_state = false; + emc->prepared = true; + + return 0; +} + +static int emc_complete_timing_change(struct tegra_emc *emc, + unsigned long rate) +{ + struct emc_timing *timing = emc_find_timing(emc, rate); + unsigned long timeout; + int ret; + + timeout = wait_for_completion_timeout(&emc->clk_handshake_complete, + msecs_to_jiffies(100)); + if (timeout == 0) { + dev_err(emc->dev, "emc-car handshake failed\n"); + emc->bad_state = true; + return -EIO; + } + + /* restore auto-calibration */ + if (emc->vref_cal_toggle) + writel_relaxed(timing->emc_auto_cal_interval, + emc->regs + EMC_AUTO_CAL_INTERVAL); + + /* restore dynamic self-refresh */ + if (timing->emc_cfg_dyn_self_ref) { + emc->emc_cfg |= EMC_CFG_DYN_SREF_ENABLE; + writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG); + } + + /* set number of clocks to wait after each ZQ command */ + if (emc->zcal_long) + writel_relaxed(timing->emc_zcal_cnt_long, + emc->regs + EMC_ZCAL_WAIT_CNT); + + udelay(2); + /* update restored timing */ + ret = emc_seq_update_timing(emc); + if (ret) + emc->bad_state = true; + + /* restore early ACK */ + mc_writel(emc->mc, emc->mc_override, MC_EMEM_ARB_OVERRIDE); + + emc->prepared = false; + + return ret; +} + +static int emc_unprepare_timing_change(struct tegra_emc *emc, + unsigned long rate) +{ + if (emc->prepared && !emc->bad_state) { + /* shouldn't ever happen in practice */ + dev_err(emc->dev, "timing configuration can't be reverted\n"); + emc->bad_state = true; + } + + return 0; +} + +static int emc_clk_change_notify(struct notifier_block *nb, + unsigned long msg, void *data) +{ + struct tegra_emc *emc = container_of(nb, struct tegra_emc, clk_nb); + struct clk_notifier_data *cnd = data; + int err; + + switch (msg) { + case PRE_RATE_CHANGE: + err = emc_prepare_timing_change(emc, cnd->new_rate); + break; + + case ABORT_RATE_CHANGE: + err = emc_unprepare_timing_change(emc, cnd->old_rate); + break; + + case POST_RATE_CHANGE: + err = emc_complete_timing_change(emc, cnd->new_rate); + break; + + default: + return NOTIFY_DONE; + } + + return notifier_from_errno(err); +} + +static int load_one_timing_from_dt(struct tegra_emc *emc, + struct emc_timing *timing, + struct device_node *node) +{ + u32 value; + int err; + + err = of_property_read_u32(node, "clock-frequency", &value); + if (err) { + dev_err(emc->dev, "timing %pOF: failed to read rate: %d\n", + node, err); + return err; + } + + timing->rate = value; + + err = of_property_read_u32_array(node, "nvidia,emc-configuration", + timing->data, + ARRAY_SIZE(emc_timing_registers)); + if (err) { + dev_err(emc->dev, + "timing %pOF: failed to read emc timing data: %d\n", + node, err); + return err; + } + +#define EMC_READ_BOOL(prop, dtprop) \ + timing->prop = of_property_read_bool(node, dtprop); + +#define EMC_READ_U32(prop, dtprop) \ + err = of_property_read_u32(node, dtprop, &timing->prop); \ + if (err) { \ + dev_err(emc->dev, \ + "timing %pOFn: failed to read " #prop ": %d\n", \ + node, err); \ + return err; \ + } + + EMC_READ_U32(emc_auto_cal_interval, "nvidia,emc-auto-cal-interval") + EMC_READ_U32(emc_mode_1, "nvidia,emc-mode-1") + EMC_READ_U32(emc_mode_2, "nvidia,emc-mode-2") + EMC_READ_U32(emc_mode_reset, "nvidia,emc-mode-reset") + EMC_READ_U32(emc_zcal_cnt_long, "nvidia,emc-zcal-cnt-long") + EMC_READ_BOOL(emc_cfg_dyn_self_ref, "nvidia,emc-cfg-dyn-self-ref") + EMC_READ_BOOL(emc_cfg_periodic_qrst, "nvidia,emc-cfg-periodic-qrst") + +#undef EMC_READ_U32 +#undef EMC_READ_BOOL + + dev_dbg(emc->dev, "%s: %pOF: rate %lu\n", __func__, node, timing->rate); + + return 0; +} + +static int cmp_timings(const void *_a, const void *_b) +{ + const struct emc_timing *a = _a; + const struct emc_timing *b = _b; + + if (a->rate < b->rate) + return -1; + + if (a->rate > b->rate) + return 1; + + return 0; +} + +static int emc_check_mc_timings(struct tegra_emc *emc) +{ + struct tegra_mc *mc = emc->mc; + unsigned int i; + + if (emc->num_timings != mc->num_timings) { + dev_err(emc->dev, "emc/mc timings number mismatch: %u %u\n", + emc->num_timings, mc->num_timings); + return -EINVAL; + } + + for (i = 0; i < mc->num_timings; i++) { + if (emc->timings[i].rate != mc->timings[i].rate) { + dev_err(emc->dev, + "emc/mc timing rate mismatch: %lu %lu\n", + emc->timings[i].rate, mc->timings[i].rate); + return -EINVAL; + } + } + + return 0; +} + +static int emc_load_timings_from_dt(struct tegra_emc *emc, + struct device_node *node) +{ + struct device_node *child; + struct emc_timing *timing; + int child_count; + int err; + + child_count = of_get_child_count(node); + if (!child_count) { + dev_err(emc->dev, "no memory timings in: %pOF\n", node); + return -EINVAL; + } + + emc->timings = devm_kcalloc(emc->dev, child_count, sizeof(*timing), + GFP_KERNEL); + if (!emc->timings) + return -ENOMEM; + + emc->num_timings = child_count; + timing = emc->timings; + + for_each_child_of_node(node, child) { + err = load_one_timing_from_dt(emc, timing++, child); + if (err) { + of_node_put(child); + return err; + } + } + + sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings, + NULL); + + err = emc_check_mc_timings(emc); + if (err) + return err; + + dev_info(emc->dev, + "got %u timings for RAM code %u (min %luMHz max %luMHz)\n", + emc->num_timings, + tegra_read_ram_code(), + emc->timings[0].rate / 1000000, + emc->timings[emc->num_timings - 1].rate / 1000000); + + return 0; +} + +static struct device_node *emc_find_node_by_ram_code(struct device *dev) +{ + struct device_node *np; + u32 value, ram_code; + int err; + + ram_code = tegra_read_ram_code(); + + for_each_child_of_node(dev->of_node, np) { + err = of_property_read_u32(np, "nvidia,ram-code", &value); + if (err || value != ram_code) + continue; + + return np; + } + + dev_err(dev, "no memory timings for RAM code %u found in device-tree\n", + ram_code); + + return NULL; +} + +static int emc_setup_hw(struct tegra_emc *emc) +{ + u32 intmask = EMC_REFRESH_OVERFLOW_INT | EMC_CLKCHANGE_COMPLETE_INT; + u32 fbio_cfg5, emc_cfg, emc_dbg; + enum emc_dram_type dram_type; + + fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5); + dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK; + + emc_cfg = readl_relaxed(emc->regs + EMC_CFG_2); + + /* enable EMC and CAR to handshake on PLL divider/source changes */ + emc_cfg |= EMC_CLKCHANGE_REQ_ENABLE; + + /* configure clock change mode accordingly to DRAM type */ + switch (dram_type) { + case DRAM_TYPE_LPDDR2: + emc_cfg |= EMC_CLKCHANGE_PD_ENABLE; + emc_cfg &= ~EMC_CLKCHANGE_SR_ENABLE; + break; + + default: + emc_cfg &= ~EMC_CLKCHANGE_SR_ENABLE; + emc_cfg &= ~EMC_CLKCHANGE_PD_ENABLE; + break; + } + + writel_relaxed(emc_cfg, emc->regs + EMC_CFG_2); + + /* initialize interrupt */ + writel_relaxed(intmask, emc->regs + EMC_INTMASK); + writel_relaxed(0xffffffff, emc->regs + EMC_INTSTATUS); + + /* ensure that unwanted debug features are disabled */ + emc_dbg = readl_relaxed(emc->regs + EMC_DBG); + emc_dbg |= EMC_DBG_CFG_PRIORITY; + emc_dbg &= ~EMC_DBG_READ_MUX_ASSEMBLY; + emc_dbg &= ~EMC_DBG_WRITE_MUX_ACTIVE; + emc_dbg &= ~EMC_DBG_FORCE_UPDATE; + writel_relaxed(emc_dbg, emc->regs + EMC_DBG); + + return 0; +} + +static long emc_round_rate(unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + void *arg) +{ + struct emc_timing *timing = NULL; + struct tegra_emc *emc = arg; + unsigned int i; + + min_rate = min(min_rate, emc->timings[emc->num_timings - 1].rate); + + for (i = 0; i < emc->num_timings; i++) { + if (emc->timings[i].rate < rate && i != emc->num_timings - 1) + continue; + + if (emc->timings[i].rate > max_rate) { + i = max(i, 1u) - 1; + + if (emc->timings[i].rate < min_rate) + break; + } + + if (emc->timings[i].rate < min_rate) + continue; + + timing = &emc->timings[i]; + break; + } + + if (!timing) { + dev_err(emc->dev, "no timing for rate %lu min %lu max %lu\n", + rate, min_rate, max_rate); + return -EINVAL; + } + + return timing->rate; +} + +static int tegra_emc_probe(struct platform_device *pdev) +{ + struct platform_device *mc; + struct device_node *np; + struct tegra_emc *emc; + int err; + + if (of_get_child_count(pdev->dev.of_node) == 0) { + dev_info(&pdev->dev, + "device-tree node doesn't have memory timings\n"); + return 0; + } + + np = of_parse_phandle(pdev->dev.of_node, "nvidia,memory-controller", 0); + if (!np) { + dev_err(&pdev->dev, "could not get memory controller node\n"); + return -ENOENT; + } + + mc = of_find_device_by_node(np); + of_node_put(np); + if (!mc) + return -ENOENT; + + np = emc_find_node_by_ram_code(&pdev->dev); + if (!np) + return -EINVAL; + + emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL); + if (!emc) { + of_node_put(np); + return -ENOMEM; + } + + emc->mc = platform_get_drvdata(mc); + if (!emc->mc) + return -EPROBE_DEFER; + + init_completion(&emc->clk_handshake_complete); + emc->clk_nb.notifier_call = emc_clk_change_notify; + emc->dev = &pdev->dev; + + err = emc_load_timings_from_dt(emc, np); + of_node_put(np); + if (err) + return err; + + emc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(emc->regs)) + return PTR_ERR(emc->regs); + + err = emc_setup_hw(emc); + if (err) + return err; + + err = platform_get_irq(pdev, 0); + if (err < 0) { + dev_err(&pdev->dev, "interrupt not specified: %d\n", err); + return err; + } + emc->irq = err; + + err = devm_request_irq(&pdev->dev, emc->irq, tegra_emc_isr, 0, + dev_name(&pdev->dev), emc); + if (err) { + dev_err(&pdev->dev, "failed to request irq: %d\n", err); + return err; + } + + tegra20_clk_set_emc_round_callback(emc_round_rate, emc); + + emc->clk = devm_clk_get(&pdev->dev, "emc"); + if (IS_ERR(emc->clk)) { + err = PTR_ERR(emc->clk); + dev_err(&pdev->dev, "failed to get emc clock: %d\n", err); + goto unset_cb; + } + + err = clk_notifier_register(emc->clk, &emc->clk_nb); + if (err) { + dev_err(&pdev->dev, "failed to register clk notifier: %d\n", + err); + goto unset_cb; + } + + platform_set_drvdata(pdev, emc); + + return 0; + +unset_cb: + tegra20_clk_set_emc_round_callback(NULL, NULL); + + return err; +} + +static int tegra_emc_suspend(struct device *dev) +{ + struct tegra_emc *emc = dev_get_drvdata(dev); + + /* + * Suspending in a bad state will hang machine. The "prepared" var + * shall be always false here unless it's a kernel bug that caused + * suspending in a wrong order. + */ + if (WARN_ON(emc->prepared) || emc->bad_state) + return -EINVAL; + + emc->bad_state = true; + + return 0; +} + +static int tegra_emc_resume(struct device *dev) +{ + struct tegra_emc *emc = dev_get_drvdata(dev); + + emc_setup_hw(emc); + emc->bad_state = false; + + return 0; +} + +static const struct dev_pm_ops tegra_emc_pm_ops = { + .suspend = tegra_emc_suspend, + .resume = tegra_emc_resume, +}; + +static const struct of_device_id tegra_emc_of_match[] = { + { .compatible = "nvidia,tegra30-emc", }, + {}, +}; + +static struct platform_driver tegra_emc_driver = { + .probe = tegra_emc_probe, + .driver = { + .name = "tegra30-emc", + .of_match_table = tegra_emc_of_match, + .pm = &tegra_emc_pm_ops, + .suppress_bind_attrs = true, + }, +}; + +static int __init tegra_emc_init(void) +{ + return platform_driver_register(&tegra_emc_driver); +} +subsys_initcall(tegra_emc_init); diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c index 14788fc2f9e8..fcdd812eed80 100644 --- a/drivers/memory/tegra/tegra30.c +++ b/drivers/memory/tegra/tegra30.c @@ -10,6 +10,27 @@ #include "mc.h" +static const unsigned long tegra30_mc_emem_regs[] = { + MC_EMEM_ARB_CFG, + MC_EMEM_ARB_OUTSTANDING_REQ, + MC_EMEM_ARB_TIMING_RCD, + MC_EMEM_ARB_TIMING_RP, + MC_EMEM_ARB_TIMING_RC, + MC_EMEM_ARB_TIMING_RAS, + MC_EMEM_ARB_TIMING_FAW, + MC_EMEM_ARB_TIMING_RRD, + MC_EMEM_ARB_TIMING_RAP2PRE, + MC_EMEM_ARB_TIMING_WAP2PRE, + MC_EMEM_ARB_TIMING_R2R, + MC_EMEM_ARB_TIMING_W2W, + MC_EMEM_ARB_TIMING_R2W, + MC_EMEM_ARB_TIMING_W2R, + MC_EMEM_ARB_DA_TURNS, + MC_EMEM_ARB_DA_COVERS, + MC_EMEM_ARB_MISC0, + MC_EMEM_ARB_RING1_THROTTLE, +}; + static const struct tegra_mc_client tegra30_mc_clients[] = { { .id = 0x00, @@ -931,16 +952,19 @@ static const struct tegra_smmu_swgroup tegra30_swgroups[] = { { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 }, }; -static const unsigned int tegra30_group_display[] = { +static const unsigned int tegra30_group_drm[] = { TEGRA_SWGROUP_DC, TEGRA_SWGROUP_DCB, + TEGRA_SWGROUP_G2, + TEGRA_SWGROUP_NV, + TEGRA_SWGROUP_NV2, }; static const struct tegra_smmu_group_soc tegra30_groups[] = { { - .name = "display", - .swgroups = tegra30_group_display, - .num_swgroups = ARRAY_SIZE(tegra30_group_display), + .name = "drm", + .swgroups = tegra30_group_drm, + .num_swgroups = ARRAY_SIZE(tegra30_group_drm), }, }; @@ -994,6 +1018,8 @@ const struct tegra_mc_soc tegra30_mc_soc = { .atom_size = 16, .client_id_mask = 0x7f, .smmu = &tegra30_smmu_soc, + .emem_regs = tegra30_mc_emem_regs, + .num_emem_regs = ARRAY_SIZE(tegra30_mc_emem_regs), .intmask = MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, .reset_ops = &tegra_mc_reset_ops_common, diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c index 39bd76306033..d6b533497ce1 100644 --- a/drivers/nvmem/meson-efuse.c +++ b/drivers/nvmem/meson-efuse.c @@ -17,14 +17,18 @@ static int meson_efuse_read(void *context, unsigned int offset, void *val, size_t bytes) { - return meson_sm_call_read((u8 *)val, bytes, SM_EFUSE_READ, offset, + struct meson_sm_firmware *fw = context; + + return meson_sm_call_read(fw, (u8 *)val, bytes, SM_EFUSE_READ, offset, bytes, 0, 0, 0); } static int meson_efuse_write(void *context, unsigned int offset, void *val, size_t bytes) { - return meson_sm_call_write((u8 *)val, bytes, SM_EFUSE_WRITE, offset, + struct meson_sm_firmware *fw = context; + + return meson_sm_call_write(fw, (u8 *)val, bytes, SM_EFUSE_WRITE, offset, bytes, 0, 0, 0); } @@ -37,12 +41,25 @@ MODULE_DEVICE_TABLE(of, meson_efuse_match); static int meson_efuse_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct meson_sm_firmware *fw; + struct device_node *sm_np; struct nvmem_device *nvmem; struct nvmem_config *econfig; struct clk *clk; unsigned int size; int ret; + sm_np = of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0); + if (!sm_np) { + dev_err(&pdev->dev, "no secure-monitor node\n"); + return -ENODEV; + } + + fw = meson_sm_get(sm_np); + of_node_put(sm_np); + if (!fw) + return -EPROBE_DEFER; + clk = devm_clk_get(dev, NULL); if (IS_ERR(clk)) { ret = PTR_ERR(clk); @@ -65,7 +82,7 @@ static int meson_efuse_probe(struct platform_device *pdev) return ret; } - if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) { + if (meson_sm_call(fw, SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) { dev_err(dev, "failed to get max user"); return -EINVAL; } @@ -81,6 +98,7 @@ static int meson_efuse_probe(struct platform_device *pdev) econfig->reg_read = meson_efuse_read; econfig->reg_write = meson_efuse_write; econfig->size = size; + econfig->priv = fw; nvmem = devm_nvmem_register(&pdev->dev, econfig); diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 4053ba6cd0fb..005e02dd4a91 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -103,3 +103,14 @@ config PHY_PXA_USB The PHY driver will be used by Marvell udc/ehci/otg driver. To compile this driver as a module, choose M here. + +config PHY_MMP3_USB + tristate "Marvell MMP3 USB PHY Driver" + depends on MACH_MMP3_DT || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support Marvell MMP3 USB PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell udc/ehci/otg driver. + + To compile this driver as a module, choose M here. diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile index 434eb9ca6cc3..5a106b1549f4 100644 --- a/drivers/phy/marvell/Makefile +++ b/drivers/phy/marvell/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o +obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c new file mode 100644 index 000000000000..499869595a58 --- /dev/null +++ b/drivers/phy/marvell/phy-mmp3-usb.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/soc/mmp/cputype.h> + +#define USB2_PLL_REG0 0x4 +#define USB2_PLL_REG1 0x8 +#define USB2_TX_REG0 0x10 +#define USB2_TX_REG1 0x14 +#define USB2_TX_REG2 0x18 +#define USB2_RX_REG0 0x20 +#define USB2_RX_REG1 0x24 +#define USB2_RX_REG2 0x28 +#define USB2_ANA_REG0 0x30 +#define USB2_ANA_REG1 0x34 +#define USB2_ANA_REG2 0x38 +#define USB2_DIG_REG0 0x3C +#define USB2_DIG_REG1 0x40 +#define USB2_DIG_REG2 0x44 +#define USB2_DIG_REG3 0x48 +#define USB2_TEST_REG0 0x4C +#define USB2_TEST_REG1 0x50 +#define USB2_TEST_REG2 0x54 +#define USB2_CHARGER_REG0 0x58 +#define USB2_OTG_REG0 0x5C +#define USB2_PHY_MON0 0x60 +#define USB2_RESETVE_REG0 0x64 +#define USB2_ICID_REG0 0x78 +#define USB2_ICID_REG1 0x7C + +/* USB2_PLL_REG0 */ + +/* This is for Ax stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3 0 +#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) + +#define USB2_PLL_REFDIV_SHIFT_MMP3 8 +#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) + +#define USB2_PLL_VDD12_SHIFT_MMP3 12 +#define USB2_PLL_VDD18_SHIFT_MMP3 14 + +/* This is for B0 stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 +#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 +#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 +#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF +#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 + +#define USB2_PLL_CAL12_SHIFT_MMP3 0 +#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) + +#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 + +#define USB2_PLL_KVCO_SHIFT_MMP3 4 +#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) + +#define USB2_PLL_ICP_SHIFT_MMP3 8 +#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) + +#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 + +#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 +#define USB2_PLL_PU_PLL_MASK (0x1 << 13) + +#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) + +/* USB2_TX_REG0 */ +#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 +#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) + +#define USB2_TX_RCAL_START_SHIFT_MMP3 13 + +/* USB2_TX_REG1 */ +#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 +#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) + +#define USB2_TX_AMP_SHIFT_MMP3 4 +#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) + +#define USB2_TX_VDD12_SHIFT_MMP3 8 +#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) + +/* USB2_TX_REG2 */ +#define USB2_TX_DRV_SLEWRATE_SHIFT 10 + +/* USB2_RX_REG0 */ +#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 +#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) + +#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 +#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) + +/* USB2_ANA_REG1*/ +#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 + +/* USB2_OTG_REG0 */ +#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 + +struct mmp3_usb_phy { + struct phy *phy; + void __iomem *base; +}; + +static unsigned int u2o_get(void __iomem *base, unsigned int offset) +{ + return readl_relaxed(base + offset); +} + +static void u2o_set(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg |= value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_clear(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static int mmp3_usb_phy_init(struct phy *phy) +{ + struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); + void __iomem *base = mmp3_usb_phy->base; + + if (cpu_is_mmp3_a0()) { + u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3 + | USB2_PLL_REFDIV_MASK_MMP3)); + u2o_set(base, USB2_PLL_REG0, + 0xd << USB2_PLL_REFDIV_SHIFT_MMP3 + | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3); + } else if (cpu_is_mmp3_b0()) { + u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0 + | USB2_PLL_FBDIV_MASK_MMP3_B0); + u2o_set(base, USB2_PLL_REG0, + 0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0 + | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0); + } else { + dev_err(&phy->dev, "unsupported silicon revision\n"); + return -ENODEV; + } + + u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK + | USB2_PLL_ICP_MASK_MMP3 + | USB2_PLL_KVCO_MASK_MMP3 + | USB2_PLL_CALI12_MASK_MMP3); + u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3 + | 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 + | 3 << USB2_PLL_ICP_SHIFT_MMP3 + | 3 << USB2_PLL_KVCO_SHIFT_MMP3 + | 3 << USB2_PLL_CAL12_SHIFT_MMP3); + + u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3); + u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3); + + u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3 + | USB2_TX_AMP_MASK_MMP3 + | USB2_TX_CK60_PHSEL_MASK_MMP3); + u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3 + | 4 << USB2_TX_AMP_SHIFT_MMP3 + | 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3); + + u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT); + u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT); + + u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3); + u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3); + + u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3); + + u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3); + + return 0; +} + +static int mmp3_usb_phy_calibrate(struct phy *phy) +{ + struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy); + void __iomem *base = mmp3_usb_phy->base; + int loops; + + /* + * PLL VCO and TX Impedance Calibration Timing: + * + * _____________________________________ + * PU __________| + * _____________________________ + * VCOCAL START _________| + * ___ + * REG_RCAL_START ________________| |________|_______ + * | 200us | 400us | 40| 400us | USB PHY READY + */ + + udelay(200); + u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3); + udelay(400); + u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); + udelay(40); + u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3); + udelay(400); + + loops = 0; + while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) { + mdelay(1); + loops++; + if (loops > 100) { + dev_err(&phy->dev, "PLL_READY not set after 100mS.\n"); + return -ETIMEDOUT; + } + } + + return 0; +} + +static const struct phy_ops mmp3_usb_phy_ops = { + .init = mmp3_usb_phy_init, + .calibrate = mmp3_usb_phy_calibrate, + .owner = THIS_MODULE, +}; + +static const struct of_device_id mmp3_usb_phy_of_match[] = { + { .compatible = "marvell,mmp3-usb-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match); + +static int mmp3_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *resource; + struct mmp3_usb_phy *mmp3_usb_phy; + struct phy_provider *provider; + + mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL); + if (!mmp3_usb_phy) + return -ENOMEM; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mmp3_usb_phy->base = devm_ioremap_resource(dev, resource); + if (IS_ERR(mmp3_usb_phy->base)) { + dev_err(dev, "failed to remap PHY regs\n"); + return PTR_ERR(mmp3_usb_phy->base); + } + + mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops); + if (IS_ERR(mmp3_usb_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(mmp3_usb_phy->phy); + } + + phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy); + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + return 0; +} + +static struct platform_driver mmp3_usb_phy_driver = { + .probe = mmp3_usb_phy_probe, + .driver = { + .name = "mmp3-usb-phy", + .of_match_table = mmp3_usb_phy_of_match, + }, +}; +module_platform_driver(mmp3_usb_phy_driver); + +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); +MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 7b07281aa0ae..3ad7817ce1f0 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -129,7 +129,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC + default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -138,10 +138,11 @@ config RESET_SIMPLE Currently this driver supports: - Altera SoCFPGAs - ASPEED BMC SoCs + - Bitmain BM1880 SoC + - Realtek SoCs - RCC reset controller in STM32 MCUs - Allwinner SoCs - ZTE's zx2967 family - - Bitmain BM1880 SoC config RESET_STM32MP157 bool "STM32MP157 Reset Driver" if COMPILE_TEST diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 3c9a64c1b7a8..ca1d49146f61 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -77,8 +77,10 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev) * @rcdev: a pointer to the reset controller device * @reset_spec: reset line specifier as found in the device tree * - * This simple translation function should be used for reset controllers - * with 1:1 mapping, where reset lines can be indexed by number without gaps. + * This static translation function is used by default if of_xlate in + * :c:type:`reset_controller_dev` is not set. It is useful for all reset + * controllers with 1:1 mapping, where reset lines can be indexed by number + * without gaps. */ static int of_reset_simple_xlate(struct reset_controller_dev *rcdev, const struct of_phandle_args *reset_spec) @@ -333,7 +335,6 @@ EXPORT_SYMBOL_GPL(reset_control_reset); * internal state to be reset, but must be prepared for this to happen. * Consumers must not use reset_control_reset on shared reset lines when * reset_control_(de)assert has been used. - * return 0. * * If rstc is NULL it is an optional reset and the function will just * return 0. @@ -392,7 +393,6 @@ EXPORT_SYMBOL_GPL(reset_control_assert); * After calling this function, the reset is guaranteed to be deasserted. * Consumers must not use reset_control_reset on shared reset lines when * reset_control_(de)assert has been used. - * return 0. * * If rstc is NULL it is an optional reset and the function will just * return 0. diff --git a/drivers/reset/hisilicon/reset-hi3660.c b/drivers/reset/hisilicon/reset-hi3660.c index f690b1878071..a7d4445924e5 100644 --- a/drivers/reset/hisilicon/reset-hi3660.c +++ b/drivers/reset/hisilicon/reset-hi3660.c @@ -56,7 +56,7 @@ static int hi3660_reset_dev(struct reset_controller_dev *rcdev, return hi3660_reset_deassert(rcdev, idx); } -static struct reset_control_ops hi3660_reset_ops = { +static const struct reset_control_ops hi3660_reset_ops = { .reset = hi3660_reset_dev, .assert = hi3660_reset_assert, .deassert = hi3660_reset_deassert, diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c index c53a2185a039..1dc06e08a8da 100644 --- a/drivers/reset/reset-meson-audio-arb.c +++ b/drivers/reset/reset-meson-audio-arb.c @@ -19,6 +19,11 @@ struct meson_audio_arb_data { spinlock_t lock; }; +struct meson_audio_arb_match_data { + const unsigned int *reset_bits; + unsigned int reset_num; +}; + #define ARB_GENERAL_BIT 31 static const unsigned int axg_audio_arb_reset_bits[] = { @@ -30,6 +35,27 @@ static const unsigned int axg_audio_arb_reset_bits[] = { [AXG_ARB_FRDDR_C] = 6, }; +static const struct meson_audio_arb_match_data axg_audio_arb_match = { + .reset_bits = axg_audio_arb_reset_bits, + .reset_num = ARRAY_SIZE(axg_audio_arb_reset_bits), +}; + +static const unsigned int sm1_audio_arb_reset_bits[] = { + [AXG_ARB_TODDR_A] = 0, + [AXG_ARB_TODDR_B] = 1, + [AXG_ARB_TODDR_C] = 2, + [AXG_ARB_FRDDR_A] = 4, + [AXG_ARB_FRDDR_B] = 5, + [AXG_ARB_FRDDR_C] = 6, + [AXG_ARB_TODDR_D] = 3, + [AXG_ARB_FRDDR_D] = 7, +}; + +static const struct meson_audio_arb_match_data sm1_audio_arb_match = { + .reset_bits = sm1_audio_arb_reset_bits, + .reset_num = ARRAY_SIZE(sm1_audio_arb_reset_bits), +}; + static int meson_audio_arb_update(struct reset_controller_dev *rcdev, unsigned long id, bool assert) { @@ -82,7 +108,13 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = { }; static const struct of_device_id meson_audio_arb_of_match[] = { - { .compatible = "amlogic,meson-axg-audio-arb", }, + { + .compatible = "amlogic,meson-axg-audio-arb", + .data = &axg_audio_arb_match, + }, { + .compatible = "amlogic,meson-sm1-audio-arb", + .data = &sm1_audio_arb_match, + }, {} }; MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match); @@ -104,10 +136,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev) static int meson_audio_arb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + const struct meson_audio_arb_match_data *data; struct meson_audio_arb_data *arb; struct resource *res; int ret; + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL); if (!arb) return -ENOMEM; @@ -126,8 +163,8 @@ static int meson_audio_arb_probe(struct platform_device *pdev) return PTR_ERR(arb->regs); spin_lock_init(&arb->lock); - arb->reset_bits = axg_audio_arb_reset_bits; - arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits); + arb->reset_bits = data->reset_bits; + arb->rstc.nr_resets = data->reset_num; arb->rstc.ops = &meson_audio_arb_rstc_ops; arb->rstc.of_node = dev->of_node; arb->rstc.owner = THIS_MODULE; diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index 7d05d766e1ea..94d7ba88d7d2 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -15,12 +15,16 @@ #include <linux/types.h> #include <linux/of_device.h> -#define REG_COUNT 8 #define BITS_PER_REG 32 -#define LEVEL_OFFSET 0x7c + +struct meson_reset_param { + int reg_count; + int level_offset; +}; struct meson_reset { void __iomem *reg_base; + const struct meson_reset_param *param; struct reset_controller_dev rcdev; spinlock_t lock; }; @@ -46,10 +50,12 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, container_of(rcdev, struct meson_reset, rcdev); unsigned int bank = id / BITS_PER_REG; unsigned int offset = id % BITS_PER_REG; - void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2); + void __iomem *reg_addr; unsigned long flags; u32 reg; + reg_addr = data->reg_base + data->param->level_offset + (bank << 2); + spin_lock_irqsave(&data->lock, flags); reg = readl(reg_addr); @@ -81,10 +87,21 @@ static const struct reset_control_ops meson_reset_ops = { .deassert = meson_reset_deassert, }; +static const struct meson_reset_param meson8b_param = { + .reg_count = 8, + .level_offset = 0x7c, +}; + +static const struct meson_reset_param meson_a1_param = { + .reg_count = 3, + .level_offset = 0x40, +}; + static const struct of_device_id meson_reset_dt_ids[] = { - { .compatible = "amlogic,meson8b-reset" }, - { .compatible = "amlogic,meson-gxbb-reset" }, - { .compatible = "amlogic,meson-axg-reset" }, + { .compatible = "amlogic,meson8b-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param}, { /* sentinel */ }, }; @@ -102,12 +119,16 @@ static int meson_reset_probe(struct platform_device *pdev) if (IS_ERR(data->reg_base)) return PTR_ERR(data->reg_base); + data->param = of_device_get_match_data(&pdev->dev); + if (!data->param) + return -ENODEV; + platform_set_drvdata(pdev, data); spin_lock_init(&data->lock); data->rcdev.owner = THIS_MODULE; - data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG; + data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG; data->rcdev.ops = &meson_reset_ops; data->rcdev.of_node = pdev->dev.of_node; diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c index a45923f4df6d..2b188b3bb69a 100644 --- a/drivers/reset/reset-uniphier-glue.c +++ b/drivers/reset/reset-uniphier-glue.c @@ -141,6 +141,10 @@ static const struct of_device_id uniphier_glue_reset_match[] = { .data = &uniphier_pro4_data, }, { + .compatible = "socionext,uniphier-pro5-usb3-reset", + .data = &uniphier_pro4_data, + }, + { .compatible = "socionext,uniphier-pxs2-usb3-reset", .data = &uniphier_pxs2_data, }, diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c index 99e75d92dada..0144075b11a6 100644 --- a/drivers/reset/reset-zynqmp.c +++ b/drivers/reset/reset-zynqmp.c @@ -64,7 +64,7 @@ static int zynqmp_reset_reset(struct reset_controller_dev *rcdev, PM_RESET_ACTION_PULSE); } -static struct reset_control_ops zynqmp_reset_ops = { +static const struct reset_control_ops zynqmp_reset_ops = { .reset = zynqmp_reset_reset, .assert = zynqmp_reset_assert, .deassert = zynqmp_reset_deassert, diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c index 6d0d04f163cb..01fc0d20a70d 100644 --- a/drivers/soc/amlogic/meson-gx-socinfo.c +++ b/drivers/soc/amlogic/meson-gx-socinfo.c @@ -40,6 +40,7 @@ static const struct meson_gx_soc_id { { "G12A", 0x28 }, { "G12B", 0x29 }, { "SM1", 0x2b }, + { "A1", 0x2c }, }; static const struct meson_gx_package_id { @@ -68,6 +69,8 @@ static const struct meson_gx_package_id { { "S922X", 0x29, 0x40, 0xf0 }, { "A311D", 0x29, 0x10, 0xf0 }, { "S905X3", 0x2b, 0x5, 0xf }, + { "S905D3", 0x2b, 0xb0, 0xf0 }, + { "A113L", 0x2c, 0x0, 0xf8 }, }; static inline unsigned int socinfo_to_major(u32 socinfo) diff --git a/drivers/soc/atmel/Kconfig b/drivers/soc/atmel/Kconfig index 05528139b023..50caf6db9c0e 100644 --- a/drivers/soc/atmel/Kconfig +++ b/drivers/soc/atmel/Kconfig @@ -5,3 +5,14 @@ config AT91_SOC_ID default ARCH_AT91 help Include support for the SoC bus on the Atmel ARM SoCs. + +config AT91_SOC_SFR + tristate "Special Function Registers support" + depends on ARCH_AT91 || COMPILE_TEST + help + This is a driver for the Special Function Registers available on + Atmel SAMA5Dx SoCs, providing access to specific aspects of the + integrated memory, bridge implementations, processor etc. + + This driver can also be built as a module. If so, the module + will be called sfr. diff --git a/drivers/soc/atmel/Makefile b/drivers/soc/atmel/Makefile index 7ca355d10553..d849a897cd77 100644 --- a/drivers/soc/atmel/Makefile +++ b/drivers/soc/atmel/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_AT91_SOC_ID) += soc.o +obj-$(CONFIG_AT91_SOC_SFR) += sfr.o diff --git a/drivers/soc/atmel/sfr.c b/drivers/soc/atmel/sfr.c new file mode 100644 index 000000000000..0525eef49d1a --- /dev/null +++ b/drivers/soc/atmel/sfr.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sfr.c - driver for special function registers + * + * Copyright (C) 2019 Bootlin. + * + */ +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/random.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define SFR_SN0 0x4c +#define SFR_SN_SIZE 8 + +struct atmel_sfr_priv { + struct regmap *regmap; +}; + +static int atmel_sfr_read(void *context, unsigned int offset, + void *buf, size_t bytes) +{ + struct atmel_sfr_priv *priv = context; + + return regmap_bulk_read(priv->regmap, SFR_SN0 + offset, + buf, bytes / 4); +} + +static struct nvmem_config atmel_sfr_nvmem_config = { + .name = "atmel-sfr", + .read_only = true, + .word_size = 4, + .stride = 4, + .size = SFR_SN_SIZE, + .reg_read = atmel_sfr_read, +}; + +static int atmel_sfr_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct nvmem_device *nvmem; + struct atmel_sfr_priv *priv; + u8 sn[SFR_SN_SIZE]; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = syscon_node_to_regmap(np); + if (IS_ERR(priv->regmap)) { + dev_err(dev, "cannot get parent's regmap\n"); + return PTR_ERR(priv->regmap); + } + + atmel_sfr_nvmem_config.dev = dev; + atmel_sfr_nvmem_config.priv = priv; + + nvmem = devm_nvmem_register(dev, &atmel_sfr_nvmem_config); + if (IS_ERR(nvmem)) { + dev_err(dev, "error registering nvmem config\n"); + return PTR_ERR(nvmem); + } + + ret = atmel_sfr_read(priv, 0, sn, SFR_SN_SIZE); + if (ret == 0) + add_device_randomness(sn, SFR_SN_SIZE); + + return ret; +} + +static const struct of_device_id atmel_sfr_dt_ids[] = { + { + .compatible = "atmel,sama5d2-sfr", + }, { + .compatible = "atmel,sama5d4-sfr", + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, atmel_sfr_dt_ids); + +static struct platform_driver atmel_sfr_driver = { + .probe = atmel_sfr_probe, + .driver = { + .name = "atmel-sfr", + .of_match_table = atmel_sfr_dt_ids, + }, +}; +module_platform_driver(atmel_sfr_driver); + +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_DESCRIPTION("Atmel SFR SN driver for SAMA5D2/4 SoC family"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index f9ad8ad54a7d..4df32bc4c7a6 100644 --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig @@ -40,4 +40,14 @@ config DPAA2_CONSOLE /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console, which can be used to dump the Management Complex and AIOP firmware logs. + +config FSL_RCPM + bool "Freescale RCPM support" + depends on PM_SLEEP && (ARM || ARM64) + help + The NXP QorIQ Processors based on ARM Core have RCPM module + (Run Control and Power Management), which performs all device-level + tasks associated with power management, such as wakeup source control. + Note that currently this driver will not support PowerPC based + QorIQ processor. endmenu diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile index 71dee8d0d1f0..906f1cd8af01 100644 --- a/drivers/soc/fsl/Makefile +++ b/drivers/soc/fsl/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_FSL_DPAA) += qbman/ obj-$(CONFIG_QUICC_ENGINE) += qe/ obj-$(CONFIG_CPM) += qe/ +obj-$(CONFIG_FSL_RCPM) += rcpm.o obj-$(CONFIG_FSL_GUTS) += guts.o obj-$(CONFIG_FSL_MC_DPIO) += dpio/ obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c new file mode 100644 index 000000000000..a093dbe6d2cb --- /dev/null +++ b/drivers/soc/fsl/rcpm.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rcpm.c - Freescale QorIQ RCPM driver +// +// Copyright 2019 NXP +// +// Author: Ran Wang <ran.wang_1@nxp.com> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/kernel.h> + +#define RCPM_WAKEUP_CELL_MAX_SIZE 7 + +struct rcpm { + unsigned int wakeup_cells; + void __iomem *ippdexpcr_base; + bool little_endian; +}; + +/** + * rcpm_pm_prepare - performs device-level tasks associated with power + * management, such as programming related to the wakeup source control. + * @dev: Device to handle. + * + */ +static int rcpm_pm_prepare(struct device *dev) +{ + int i, ret, idx; + void __iomem *base; + struct wakeup_source *ws; + struct rcpm *rcpm; + struct device_node *np = dev->of_node; + u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1]; + u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0}; + + rcpm = dev_get_drvdata(dev); + if (!rcpm) + return -EINVAL; + + base = rcpm->ippdexpcr_base; + idx = wakeup_sources_read_lock(); + + /* Begin with first registered wakeup source */ + for_each_wakeup_source(ws) { + + /* skip object which is not attached to device */ + if (!ws->dev || !ws->dev->parent) + continue; + + ret = device_property_read_u32_array(ws->dev->parent, + "fsl,rcpm-wakeup", value, + rcpm->wakeup_cells + 1); + + /* Wakeup source should refer to current rcpm device */ + if (ret || (np->phandle != value[0])) + continue; + + /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the + * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup" + * of wakeup source IP contains an integer array: <phandle to + * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting, + * IPPDEXPCR2 setting, etc>. + * + * So we will go thought them to collect setting data. + */ + for (i = 0; i < rcpm->wakeup_cells; i++) + setting[i] |= value[i + 1]; + } + + wakeup_sources_read_unlock(idx); + + /* Program all IPPDEXPCRn once */ + for (i = 0; i < rcpm->wakeup_cells; i++) { + u32 tmp = setting[i]; + void __iomem *address = base + i * 4; + + if (!tmp) + continue; + + /* We can only OR related bits */ + if (rcpm->little_endian) { + tmp |= ioread32(address); + iowrite32(tmp, address); + } else { + tmp |= ioread32be(address); + iowrite32be(tmp, address); + } + } + + return 0; +} + +static const struct dev_pm_ops rcpm_pm_ops = { + .prepare = rcpm_pm_prepare, +}; + +static int rcpm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *r; + struct rcpm *rcpm; + int ret; + + rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL); + if (!rcpm) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(rcpm->ippdexpcr_base)) { + ret = PTR_ERR(rcpm->ippdexpcr_base); + return ret; + } + + rcpm->little_endian = device_property_read_bool( + &pdev->dev, "little-endian"); + + ret = device_property_read_u32(&pdev->dev, + "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells); + if (ret) + return ret; + + dev_set_drvdata(&pdev->dev, rcpm); + + return 0; +} + +static const struct of_device_id rcpm_of_match[] = { + { .compatible = "fsl,qoriq-rcpm-2.1+", }, + {} +}; +MODULE_DEVICE_TABLE(of, rcpm_of_match); + +static struct platform_driver rcpm_driver = { + .driver = { + .name = "rcpm", + .of_match_table = rcpm_of_match, + .pm = &rcpm_pm_ops, + }, + .probe = rcpm_probe, +}; + +module_platform_driver(rcpm_driver); diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c index c68882eb80f7..fb70b8a3f7c5 100644 --- a/drivers/soc/imx/soc-imx-scu.c +++ b/drivers/soc/imx/soc-imx-scu.c @@ -33,12 +33,10 @@ struct imx_sc_msg_misc_get_soc_uid { u32 uid_high; } __packed; -static ssize_t soc_uid_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int imx_scu_soc_uid(u64 *soc_uid) { struct imx_sc_msg_misc_get_soc_uid msg; struct imx_sc_rpc_msg *hdr = &msg.hdr; - u64 soc_uid; int ret; hdr->ver = IMX_SC_RPC_VERSION; @@ -52,15 +50,13 @@ static ssize_t soc_uid_show(struct device *dev, return ret; } - soc_uid = msg.uid_high; - soc_uid <<= 32; - soc_uid |= msg.uid_low; + *soc_uid = msg.uid_high; + *soc_uid <<= 32; + *soc_uid |= msg.uid_low; - return sprintf(buf, "%016llX\n", soc_uid); + return 0; } -static DEVICE_ATTR_RO(soc_uid); - static int imx_scu_soc_id(void) { struct imx_sc_msg_misc_get_soc_id msg; @@ -89,6 +85,7 @@ static int imx_scu_soc_probe(struct platform_device *pdev) struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; int id, ret; + u64 uid = 0; u32 val; ret = imx_scu_get_handle(&soc_ipc_handle); @@ -112,6 +109,10 @@ static int imx_scu_soc_probe(struct platform_device *pdev) if (id < 0) return -EINVAL; + ret = imx_scu_soc_uid(&uid); + if (ret < 0) + return -EINVAL; + /* format soc_id value passed from SCU firmware */ val = id & 0x1f; soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", val); @@ -130,19 +131,22 @@ static int imx_scu_soc_probe(struct platform_device *pdev) goto free_soc_id; } + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", uid); + if (!soc_dev_attr->serial_number) { + ret = -ENOMEM; + goto free_revision; + } + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { ret = PTR_ERR(soc_dev); - goto free_revision; + goto free_serial_number; } - ret = device_create_file(soc_device_to_device(soc_dev), - &dev_attr_soc_uid); - if (ret) - goto free_revision; - return 0; +free_serial_number: + kfree(soc_dev_attr->serial_number); free_revision: kfree(soc_dev_attr->revision); free_soc_id: diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c index b9831576dd25..d84ed736cdb0 100644 --- a/drivers/soc/imx/soc-imx8.c +++ b/drivers/soc/imx/soc-imx8.c @@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/sys_soc.h> #include <linux/platform_device.h> +#include <linux/arm-smccc.h> #include <linux/of.h> #define REV_B1 0x21 @@ -16,6 +17,8 @@ #define IMX8MQ_SW_INFO_B1 0x40 #define IMX8MQ_SW_MAGIC_B1 0xff0055aa +#define IMX_SIP_GET_SOC_INFO 0xc2000006 + #define OCOTP_UID_LOW 0x410 #define OCOTP_UID_HIGH 0x420 @@ -29,13 +32,21 @@ struct imx8_soc_data { static u64 soc_uid; -static ssize_t soc_uid_show(struct device *dev, - struct device_attribute *attr, char *buf) +#ifdef CONFIG_HAVE_ARM_SMCCC +static u32 imx8mq_soc_revision_from_atf(void) { - return sprintf(buf, "%016llX\n", soc_uid); -} + struct arm_smccc_res res; -static DEVICE_ATTR_RO(soc_uid); + arm_smccc_smc(IMX_SIP_GET_SOC_INFO, 0, 0, 0, 0, 0, 0, 0, &res); + + if (res.a0 == SMCCC_RET_NOT_SUPPORTED) + return 0; + else + return res.a0 & 0xff; +} +#else +static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; }; +#endif static u32 __init imx8mq_soc_revision(void) { @@ -51,9 +62,16 @@ static u32 __init imx8mq_soc_revision(void) ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); - magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1); - if (magic == IMX8MQ_SW_MAGIC_B1) - rev = REV_B1; + /* + * SOC revision on older imx8mq is not available in fuses so query + * the value from ATF instead. + */ + rev = imx8mq_soc_revision_from_atf(); + if (!rev) { + magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1); + if (magic == IMX8MQ_SW_MAGIC_B1) + rev = REV_B1; + } soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH); soc_uid <<= 32; @@ -174,22 +192,25 @@ static int __init imx8_soc_init(void) goto free_soc; } + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); + if (!soc_dev_attr->serial_number) { + ret = -ENOMEM; + goto free_rev; + } + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { ret = PTR_ERR(soc_dev); - goto free_rev; + goto free_serial_number; } - ret = device_create_file(soc_device_to_device(soc_dev), - &dev_attr_soc_uid); - if (ret) - goto free_rev; - if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT)) platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0); return 0; +free_serial_number: + kfree(soc_dev_attr->serial_number); free_rev: if (strcmp(soc_dev_attr->revision, "unknown")) kfree(soc_dev_attr->revision); diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 503222d0d0da..f669d3754627 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -21,7 +21,7 @@ #include <dt-bindings/power/mt8173-power.h> #define MTK_POLL_DELAY_US 10 -#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) +#define MTK_POLL_TIMEOUT USEC_PER_SEC #define MTK_SCPD_ACTIVE_WAKEUP BIT(0) #define MTK_SCPD_FWAIT_SRAM BIT(1) @@ -108,6 +108,17 @@ static const char * const clk_names[] = { #define MAX_CLKS 3 +/** + * struct scp_domain_data - scp domain data for power on/off flow + * @name: The domain name. + * @sta_mask: The mask for power on/off status bit. + * @ctl_offs: The offset for main power control register. + * @sram_pdn_bits: The mask for sram power control bits. + * @sram_pdn_ack_bits: The mask for sram power control acked bits. + * @bus_prot_mask: The mask for single step bus protection. + * @clk_id: The basic clocks required by this power domain. + * @caps: The flag for active wake-up action. + */ struct scp_domain_data { const char *name; u32 sta_mask; @@ -180,32 +191,132 @@ static int scpsys_domain_is_on(struct scp_domain *scpd) return -EINVAL; } +static int scpsys_regulator_enable(struct scp_domain *scpd) +{ + if (!scpd->supply) + return 0; + + return regulator_enable(scpd->supply); +} + +static int scpsys_regulator_disable(struct scp_domain *scpd) +{ + if (!scpd->supply) + return 0; + + return regulator_disable(scpd->supply); +} + +static void scpsys_clk_disable(struct clk *clk[], int max_num) +{ + int i; + + for (i = max_num - 1; i >= 0; i--) + clk_disable_unprepare(clk[i]); +} + +static int scpsys_clk_enable(struct clk *clk[], int max_num) +{ + int i, ret = 0; + + for (i = 0; i < max_num && clk[i]; i++) { + ret = clk_prepare_enable(clk[i]); + if (ret) { + scpsys_clk_disable(clk, i); + break; + } + } + + return ret; +} + +static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr) +{ + u32 val; + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; + int tmp; + + val = readl(ctl_addr); + val &= ~scpd->data->sram_pdn_bits; + writel(val, ctl_addr); + + /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ + if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { + /* + * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for + * MT7622_POWER_DOMAIN_WB and thus just a trivial setup + * is applied here. + */ + usleep_range(12000, 12100); + } else { + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ + int ret = readl_poll_timeout(ctl_addr, tmp, + (tmp & pdn_ack) == 0, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + if (ret < 0) + return ret; + } + + return 0; +} + +static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr) +{ + u32 val; + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; + int tmp; + + val = readl(ctl_addr); + val |= scpd->data->sram_pdn_bits; + writel(val, ctl_addr); + + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ + return readl_poll_timeout(ctl_addr, tmp, + (tmp & pdn_ack) == pdn_ack, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); +} + +static int scpsys_bus_protect_enable(struct scp_domain *scpd) +{ + struct scp *scp = scpd->scp; + + if (!scpd->data->bus_prot_mask) + return 0; + + return mtk_infracfg_set_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + +static int scpsys_bus_protect_disable(struct scp_domain *scpd) +{ + struct scp *scp = scpd->scp; + + if (!scpd->data->bus_prot_mask) + return 0; + + return mtk_infracfg_clear_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + static int scpsys_power_on(struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); struct scp *scp = scpd->scp; void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; u32 val; int ret, tmp; - int i; - if (scpd->supply) { - ret = regulator_enable(scpd->supply); - if (ret) - return ret; - } - - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) { - ret = clk_prepare_enable(scpd->clk[i]); - if (ret) { - for (--i; i >= 0; i--) - clk_disable_unprepare(scpd->clk[i]); + ret = scpsys_regulator_enable(scpd); + if (ret < 0) + return ret; - goto err_clk; - } - } + ret = scpsys_clk_enable(scpd->clk, MAX_CLKS); + if (ret) + goto err_clk; + /* subsys power on */ val = readl(ctl_addr); val |= PWR_ON_BIT; writel(val, ctl_addr); @@ -227,43 +338,20 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |= PWR_RST_B_BIT; writel(val, ctl_addr); - val &= ~scpd->data->sram_pdn_bits; - writel(val, ctl_addr); - - /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ - if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { - /* - * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for - * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is - * applied here. - */ - usleep_range(12000, 12100); - - } else { - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); - if (ret < 0) - goto err_pwr_ack; - } + ret = scpsys_sram_enable(scpd, ctl_addr); + if (ret < 0) + goto err_pwr_ack; - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_clear_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto err_pwr_ack; - } + ret = scpsys_bus_protect_disable(scpd); + if (ret < 0) + goto err_pwr_ack; return 0; err_pwr_ack: - for (i = MAX_CLKS - 1; i >= 0; i--) { - if (scpd->clk[i]) - clk_disable_unprepare(scpd->clk[i]); - } + scpsys_clk_disable(scpd->clk, MAX_CLKS); err_clk: - if (scpd->supply) - regulator_disable(scpd->supply); + scpsys_regulator_disable(scpd); dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name); @@ -275,29 +363,19 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); struct scp *scp = scpd->scp; void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; u32 val; int ret, tmp; - int i; - - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_set_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto out; - } - val = readl(ctl_addr); - val |= scpd->data->sram_pdn_bits; - writel(val, ctl_addr); + ret = scpsys_bus_protect_enable(scpd); + if (ret < 0) + goto out; - /* wait until SRAM_PDN_ACK all 1 */ - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + ret = scpsys_sram_disable(scpd, ctl_addr); if (ret < 0) goto out; + /* subsys power off */ + val = readl(ctl_addr); val |= PWR_ISO_BIT; writel(val, ctl_addr); @@ -319,11 +397,11 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) if (ret < 0) goto out; - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) - clk_disable_unprepare(scpd->clk[i]); + scpsys_clk_disable(scpd->clk, MAX_CLKS); - if (scpd->supply) - regulator_disable(scpd->supply); + ret = scpsys_regulator_disable(scpd); + if (ret < 0) + goto out; return 0; diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 661e47acc354..c6df8b43fa6d 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -58,17 +58,9 @@ config QCOM_LLCC depends on ARCH_QCOM || COMPILE_TEST help Qualcomm Technologies, Inc. platform specific - Last Level Cache Controller(LLCC) driver. This provides interfaces - to clients that use the LLCC. Say yes here to enable LLCC slice - driver. - -config QCOM_SDM845_LLCC - tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" - depends on QCOM_LLCC - help - Say yes here to enable the LLCC driver for SDM845. This provides - data required to configure LLCC so that clients can start using the - LLCC slices. + Last Level Cache Controller(LLCC) driver for platforms such as, + SDM845. This provides interfaces to clients that use the LLCC. + Say yes here to enable LLCC slice driver. config QCOM_MDT_LOADER tristate diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 162788701a77..2559fe948ce0 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o obj-$(CONFIG_QCOM_APR) += apr.o -obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o -obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o +obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-qcom.c index 9090ea12eaf3..429b5a60a1ba 100644 --- a/drivers/soc/qcom/llcc-slice.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. * */ @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/of.h> #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/sizes.h> @@ -46,15 +47,90 @@ #define BANK_OFFSET_STRIDE 0x80000 -static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER; +/** + * llcc_slice_config - Data associated with the llcc slice + * @usecase_id: Unique id for the client's use case + * @slice_id: llcc slice id for each client + * @max_cap: The maximum capacity of the cache slice provided in KB + * @priority: Priority of the client used to select victim line for replacement + * @fixed_size: Boolean indicating if the slice has a fixed capacity + * @bonus_ways: Bonus ways are additional ways to be used for any slice, + * if client ends up using more than reserved cache ways. Bonus + * ways are allocated only if they are not reserved for some + * other client. + * @res_ways: Reserved ways for the cache slice, the reserved ways cannot + * be used by any other client than the one its assigned to. + * @cache_mode: Each slice operates as a cache, this controls the mode of the + * slice: normal or TCM(Tightly Coupled Memory) + * @probe_target_ways: Determines what ways to probe for access hit. When + * configured to 1 only bonus and reserved ways are probed. + * When configured to 0 all ways in llcc are probed. + * @dis_cap_alloc: Disable capacity based allocation for a client + * @retain_on_pc: If this bit is set and client has maintained active vote + * then the ways assigned to this client are not flushed on power + * collapse. + * @activate_on_init: Activate the slice immediately after it is programmed + */ +struct llcc_slice_config { + u32 usecase_id; + u32 slice_id; + u32 max_cap; + u32 priority; + bool fixed_size; + u32 bonus_ways; + u32 res_ways; + u32 cache_mode; + u32 probe_target_ways; + bool dis_cap_alloc; + bool retain_on_pc; + bool activate_on_init; +}; + +struct qcom_llcc_config { + const struct llcc_slice_config *sct_data; + int size; +}; + +static const struct llcc_slice_config sc7180_data[] = { + { LLCC_CPUSS, 1, 256, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 1 }, + { LLCC_MDM, 8, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, + { LLCC_GPUHTW, 11, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, + { LLCC_GPU, 12, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, +}; + +static const struct llcc_slice_config sdm845_data[] = { + { LLCC_CPUSS, 1, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 1 }, + { LLCC_VIDSC0, 2, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0 }, + { LLCC_VIDSC1, 3, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0 }, + { LLCC_ROTATOR, 4, 563, 2, 1, 0x0, 0x00e, 2, 0, 1, 1, 0 }, + { LLCC_VOICE, 5, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_AUDIO, 6, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MDMHPGRW, 7, 1024, 2, 0, 0xfc, 0xf00, 0, 0, 1, 1, 0 }, + { LLCC_MDM, 8, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_CMPT, 10, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_GPUHTW, 11, 512, 1, 1, 0xc, 0x0, 0, 0, 1, 1, 0 }, + { LLCC_GPU, 12, 2304, 1, 0, 0xff0, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MMUHWT, 13, 256, 2, 0, 0x0, 0x1, 0, 0, 1, 0, 1 }, + { LLCC_CMPTDMA, 15, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_DISP, 16, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_VIDFW, 17, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MDMHPFX, 20, 1024, 2, 1, 0x0, 0xf00, 0, 0, 1, 1, 0 }, + { LLCC_MDMPNG, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0 }, + { LLCC_AUDHW, 22, 1024, 1, 1, 0xffc, 0x2, 0, 0, 1, 1, 0 }, +}; + +static const struct qcom_llcc_config sc7180_cfg = { + .sct_data = sc7180_data, + .size = ARRAY_SIZE(sc7180_data), +}; -static const struct regmap_config llcc_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, - .val_bits = 32, - .fast_io = true, +static const struct qcom_llcc_config sdm845_cfg = { + .sct_data = sdm845_data, + .size = ARRAY_SIZE(sdm845_data), }; +static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER; + /** * llcc_slice_getd - get llcc slice descriptor * @uid: usecase_id for the client @@ -301,19 +377,24 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev) return ret; } -int qcom_llcc_remove(struct platform_device *pdev) +static int qcom_llcc_remove(struct platform_device *pdev) { /* Set the global pointer to a error code to avoid referencing it */ drv_data = ERR_PTR(-ENODEV); return 0; } -EXPORT_SYMBOL_GPL(qcom_llcc_remove); static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, const char *name) { struct resource *res; void __iomem *base; + struct regmap_config llcc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + }; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); if (!res) @@ -323,16 +404,19 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, if (IS_ERR(base)) return ERR_CAST(base); + llcc_regmap_config.name = name; return devm_regmap_init_mmio(&pdev->dev, base, &llcc_regmap_config); } -int qcom_llcc_probe(struct platform_device *pdev, - const struct llcc_slice_config *llcc_cfg, u32 sz) +static int qcom_llcc_probe(struct platform_device *pdev) { u32 num_banks; struct device *dev = &pdev->dev; int ret, i; struct platform_device *llcc_edac; + const struct qcom_llcc_config *cfg; + const struct llcc_slice_config *llcc_cfg; + u32 sz; drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -362,6 +446,10 @@ int qcom_llcc_probe(struct platform_device *pdev, num_banks >>= LLCC_LB_CNT_SHIFT; drv_data->num_banks = num_banks; + cfg = of_device_get_match_data(&pdev->dev); + llcc_cfg = cfg->sct_data; + sz = cfg->size; + for (i = 0; i < sz; i++) if (llcc_cfg[i].slice_id > drv_data->max_slices) drv_data->max_slices = llcc_cfg[i].slice_id; @@ -407,6 +495,22 @@ err: drv_data = ERR_PTR(-ENODEV); return ret; } -EXPORT_SYMBOL_GPL(qcom_llcc_probe); -MODULE_LICENSE("GPL v2"); + +static const struct of_device_id qcom_llcc_of_match[] = { + { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg }, + { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg }, + { } +}; + +static struct platform_driver qcom_llcc_driver = { + .driver = { + .name = "qcom-llcc", + .of_match_table = qcom_llcc_of_match, + }, + .probe = qcom_llcc_probe, + .remove = qcom_llcc_remove, +}; +module_platform_driver(qcom_llcc_driver); + MODULE_DESCRIPTION("Qualcomm Last Level Cache Controller"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c deleted file mode 100644 index 86600d97c36d..000000000000 --- a/drivers/soc/qcom/llcc-sdm845.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/soc/qcom/llcc-qcom.h> - -/* - * SCT(System Cache Table) entry contains of the following members: - * usecase_id: Unique id for the client's use case - * slice_id: llcc slice id for each client - * max_cap: The maximum capacity of the cache slice provided in KB - * priority: Priority of the client used to select victim line for replacement - * fixed_size: Boolean indicating if the slice has a fixed capacity - * bonus_ways: Bonus ways are additional ways to be used for any slice, - * if client ends up using more than reserved cache ways. Bonus - * ways are allocated only if they are not reserved for some - * other client. - * res_ways: Reserved ways for the cache slice, the reserved ways cannot - * be used by any other client than the one its assigned to. - * cache_mode: Each slice operates as a cache, this controls the mode of the - * slice: normal or TCM(Tightly Coupled Memory) - * probe_target_ways: Determines what ways to probe for access hit. When - * configured to 1 only bonus and reserved ways are probed. - * When configured to 0 all ways in llcc are probed. - * dis_cap_alloc: Disable capacity based allocation for a client - * retain_on_pc: If this bit is set and client has maintained active vote - * then the ways assigned to this client are not flushed on power - * collapse. - * activate_on_init: Activate the slice immediately after the SCT is programmed - */ -#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \ - { \ - .usecase_id = uid, \ - .slice_id = sid, \ - .max_cap = mc, \ - .priority = p, \ - .fixed_size = fs, \ - .bonus_ways = bway, \ - .res_ways = rway, \ - .cache_mode = cmod, \ - .probe_target_ways = ptw, \ - .dis_cap_alloc = dca, \ - .retain_on_pc = rp, \ - .activate_on_init = a, \ - } - -static struct llcc_slice_config sdm845_data[] = { - SCT_ENTRY(LLCC_CPUSS, 1, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 1), - SCT_ENTRY(LLCC_VIDSC0, 2, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VIDSC1, 3, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_ROTATOR, 4, 563, 2, 1, 0x0, 0x00e, 2, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VOICE, 5, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_AUDIO, 6, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMHPGRW, 7, 1024, 2, 0, 0xfc, 0xf00, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDM, 8, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_CMPT, 10, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_GPUHTW, 11, 512, 1, 1, 0xc, 0x0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_GPU, 12, 2304, 1, 0, 0xff0, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MMUHWT, 13, 256, 2, 0, 0x0, 0x1, 0, 0, 1, 0, 1), - SCT_ENTRY(LLCC_CMPTDMA, 15, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_DISP, 16, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VIDFW, 17, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMHPFX, 20, 1024, 2, 1, 0x0, 0xf00, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMPNG, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_AUDHW, 22, 1024, 1, 1, 0xffc, 0x2, 0, 0, 1, 1, 0), -}; - -static int sdm845_qcom_llcc_remove(struct platform_device *pdev) -{ - return qcom_llcc_remove(pdev); -} - -static int sdm845_qcom_llcc_probe(struct platform_device *pdev) -{ - return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data)); -} - -static const struct of_device_id sdm845_qcom_llcc_of_match[] = { - { .compatible = "qcom,sdm845-llcc", }, - { } -}; - -static struct platform_driver sdm845_qcom_llcc_driver = { - .driver = { - .name = "sdm845-llcc", - .of_match_table = sdm845_qcom_llcc_of_match, - }, - .probe = sdm845_qcom_llcc_probe, - .remove = sdm845_qcom_llcc_remove, -}; -module_platform_driver(sdm845_qcom_llcc_driver); - -MODULE_DESCRIPTION("QCOM sdm845 LLCC driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c index 3c1a55cf25d6..2b1834c5609a 100644 --- a/drivers/soc/qcom/rpmpd.c +++ b/drivers/soc/qcom/rpmpd.c @@ -115,6 +115,28 @@ struct rpmpd_desc { static DEFINE_MUTEX(rpmpd_lock); +/* msm8976 RPM Power Domains */ +DEFINE_RPMPD_PAIR(msm8976, vddcx, vddcx_ao, SMPA, LEVEL, 2); +DEFINE_RPMPD_PAIR(msm8976, vddmx, vddmx_ao, SMPA, LEVEL, 6); + +DEFINE_RPMPD_VFL(msm8976, vddcx_vfl, RWSC, 2); +DEFINE_RPMPD_VFL(msm8976, vddmx_vfl, RWSM, 6); + +static struct rpmpd *msm8976_rpmpds[] = { + [MSM8976_VDDCX] = &msm8976_vddcx, + [MSM8976_VDDCX_AO] = &msm8976_vddcx_ao, + [MSM8976_VDDCX_VFL] = &msm8976_vddcx_vfl, + [MSM8976_VDDMX] = &msm8976_vddmx, + [MSM8976_VDDMX_AO] = &msm8976_vddmx_ao, + [MSM8976_VDDMX_VFL] = &msm8976_vddmx_vfl, +}; + +static const struct rpmpd_desc msm8976_desc = { + .rpmpds = msm8976_rpmpds, + .num_pds = ARRAY_SIZE(msm8976_rpmpds), + .max_state = RPM_SMD_LEVEL_TURBO_HIGH, +}; + /* msm8996 RPM Power domains */ DEFINE_RPMPD_PAIR(msm8996, vddcx, vddcx_ao, SMPA, CORNER, 1); DEFINE_RPMPD_PAIR(msm8996, vddmx, vddmx_ao, SMPA, CORNER, 2); @@ -198,6 +220,7 @@ static const struct rpmpd_desc qcs404_desc = { }; static const struct of_device_id rpmpd_match_table[] = { + { .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc }, { .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc }, { .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc }, { .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc }, diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c index fa9dd12b5e39..005dd30c58fa 100644 --- a/drivers/soc/qcom/smd-rpm.c +++ b/drivers/soc/qcom/smd-rpm.c @@ -19,12 +19,14 @@ /** * struct qcom_smd_rpm - state of the rpm device driver * @rpm_channel: reference to the smd channel + * @icc: interconnect proxy device * @ack: completion for acks * @lock: mutual exclusion around the send/complete pair * @ack_status: result of the rpm request */ struct qcom_smd_rpm { struct rpmsg_endpoint *rpm_channel; + struct platform_device *icc; struct device *dev; struct completion ack; @@ -193,6 +195,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev, static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) { struct qcom_smd_rpm *rpm; + int ret; rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL); if (!rpm) @@ -205,11 +208,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) rpm->rpm_channel = rpdev->ept; dev_set_drvdata(&rpdev->dev, rpm); - return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1, + NULL, 0); + if (IS_ERR(rpm->icc)) + return PTR_ERR(rpm->icc); + + ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + if (ret) + platform_device_unregister(rpm->icc); + + return ret; } static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev) { + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); + + platform_device_unregister(rpm->icc); of_platform_depopulate(&rpdev->dev); } @@ -217,6 +232,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = { { .compatible = "qcom,rpm-apq8084" }, { .compatible = "qcom,rpm-msm8916" }, { .compatible = "qcom,rpm-msm8974" }, + { .compatible = "qcom,rpm-msm8976" }, { .compatible = "qcom,rpm-msm8996" }, { .compatible = "qcom,rpm-msm8998" }, { .compatible = "qcom,rpm-sdm660" }, diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c index a39ea5061dc5..7864b75ce569 100644 --- a/drivers/soc/qcom/socinfo.c +++ b/drivers/soc/qcom/socinfo.c @@ -198,6 +198,8 @@ static const struct soc_id soc_id[] = { { 310, "MSM8996AU" }, { 311, "APQ8096AU" }, { 312, "APQ8096SG" }, + { 321, "SDM845" }, + { 341, "SDA845" }, }; static const char *socinfo_machine(struct device *dev, unsigned int id) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 3c5e017bacba..f93492b72c04 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -178,6 +178,13 @@ config ARCH_R8A774A1 help This enables support for the Renesas RZ/G2M SoC. +config ARCH_R8A774B1 + bool "Renesas RZ/G2N SoC Platform" + select ARCH_RCAR_GEN3 + select SYSC_R8A774B1 + help + This enables support for the Renesas RZ/G2N SoC. + config ARCH_R8A774C0 bool "Renesas RZ/G2E SoC Platform" select ARCH_RCAR_GEN3 @@ -192,13 +199,24 @@ config ARCH_R8A7795 help This enables support for the Renesas R-Car H3 SoC. +config ARCH_R8A77960 + bool + select ARCH_RCAR_GEN3 + select SYSC_R8A77960 + config ARCH_R8A7796 bool "Renesas R-Car M3-W SoC Platform" - select ARCH_RCAR_GEN3 - select SYSC_R8A7796 + select ARCH_R8A77960 help This enables support for the Renesas R-Car M3-W SoC. +config ARCH_R8A77961 + bool "Renesas R-Car M3-W+ SoC Platform" + select ARCH_RCAR_GEN3 + select SYSC_R8A77961 + help + This enables support for the Renesas R-Car M3-W+ SoC. + config ARCH_R8A77965 bool "Renesas R-Car M3-N SoC Platform" select ARCH_RCAR_GEN3 @@ -253,6 +271,10 @@ config SYSC_R8A774A1 bool "RZ/G2M System Controller support" if COMPILE_TEST select SYSC_RCAR +config SYSC_R8A774B1 + bool "RZ/G2N System Controller support" if COMPILE_TEST + select SYSC_RCAR + config SYSC_R8A774C0 bool "RZ/G2E System Controller support" if COMPILE_TEST select SYSC_RCAR @@ -281,10 +303,14 @@ config SYSC_R8A7795 bool "R-Car H3 System Controller support" if COMPILE_TEST select SYSC_RCAR -config SYSC_R8A7796 +config SYSC_R8A77960 bool "R-Car M3-W System Controller support" if COMPILE_TEST select SYSC_RCAR +config SYSC_R8A77961 + bool "R-Car M3-W+ System Controller support" if COMPILE_TEST + select SYSC_RCAR + config SYSC_R8A77965 bool "R-Car M3-N System Controller support" if COMPILE_TEST select SYSC_RCAR diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 00764d5a60b3..e595c3c3bd10 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o obj-$(CONFIG_SYSC_R8A7745) += r8a7745-sysc.o obj-$(CONFIG_SYSC_R8A77470) += r8a77470-sysc.o obj-$(CONFIG_SYSC_R8A774A1) += r8a774a1-sysc.o +obj-$(CONFIG_SYSC_R8A774B1) += r8a774b1-sysc.o obj-$(CONFIG_SYSC_R8A774C0) += r8a774c0-sysc.o obj-$(CONFIG_SYSC_R8A7779) += r8a7779-sysc.o obj-$(CONFIG_SYSC_R8A7790) += r8a7790-sysc.o @@ -14,7 +15,8 @@ obj-$(CONFIG_SYSC_R8A7791) += r8a7791-sysc.o obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o -obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o +obj-$(CONFIG_SYSC_R8A77960) += r8a7796-sysc.o +obj-$(CONFIG_SYSC_R8A77961) += r8a7796-sysc.o obj-$(CONFIG_SYSC_R8A77965) += r8a77965-sysc.o obj-$(CONFIG_SYSC_R8A77970) += r8a77970-sysc.o obj-$(CONFIG_SYSC_R8A77980) += r8a77980-sysc.o diff --git a/drivers/soc/renesas/r8a7743-sysc.c b/drivers/soc/renesas/r8a7743-sysc.c index edf6436e879f..4e2c0ab951b3 100644 --- a/drivers/soc/renesas/r8a7743-sysc.c +++ b/drivers/soc/renesas/r8a7743-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7743-sysc.h> diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c index 65dc6b09cc85..865821a2f0c6 100644 --- a/drivers/soc/renesas/r8a7745-sysc.c +++ b/drivers/soc/renesas/r8a7745-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7745-sysc.h> diff --git a/drivers/soc/renesas/r8a77470-sysc.c b/drivers/soc/renesas/r8a77470-sysc.c index cfa015e208ef..1eeb8018df50 100644 --- a/drivers/soc/renesas/r8a77470-sysc.c +++ b/drivers/soc/renesas/r8a77470-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77470-sysc.h> diff --git a/drivers/soc/renesas/r8a774a1-sysc.c b/drivers/soc/renesas/r8a774a1-sysc.c index 9db51ff6f5ed..38ac2c689ff0 100644 --- a/drivers/soc/renesas/r8a774a1-sysc.c +++ b/drivers/soc/renesas/r8a774a1-sysc.c @@ -7,7 +7,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a774a1-sysc.h> diff --git a/drivers/soc/renesas/r8a774b1-sysc.c b/drivers/soc/renesas/r8a774b1-sysc.c new file mode 100644 index 000000000000..5f97ff26f3f8 --- /dev/null +++ b/drivers/soc/renesas/r8a774b1-sysc.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2N System Controller + * Copyright (C) 2019 Renesas Electronics Corp. + * + * Based on Renesas R-Car M3-W System Controller + * Copyright (C) 2016 Glider bvba + */ + +#include <linux/bits.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a774b1-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a774b1_areas[] __initconst = { + { "always-on", 0, 0, R8A774B1_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca57-scu", 0x1c0, 0, R8A774B1_PD_CA57_SCU, R8A774B1_PD_ALWAYS_ON, + PD_SCU }, + { "ca57-cpu0", 0x80, 0, R8A774B1_PD_CA57_CPU0, R8A774B1_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu1", 0x80, 1, R8A774B1_PD_CA57_CPU1, R8A774B1_PD_CA57_SCU, + PD_CPU_NOCR }, + { "a3vc", 0x380, 0, R8A774B1_PD_A3VC, R8A774B1_PD_ALWAYS_ON }, + { "a3vp", 0x340, 0, R8A774B1_PD_A3VP, R8A774B1_PD_ALWAYS_ON }, + { "a2vc1", 0x3c0, 1, R8A774B1_PD_A2VC1, R8A774B1_PD_A3VC }, + { "3dg-a", 0x100, 0, R8A774B1_PD_3DG_A, R8A774B1_PD_ALWAYS_ON }, + { "3dg-b", 0x100, 1, R8A774B1_PD_3DG_B, R8A774B1_PD_3DG_A }, +}; + +const struct rcar_sysc_info r8a774b1_sysc_info __initconst = { + .areas = r8a774b1_areas, + .num_areas = ARRAY_SIZE(r8a774b1_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), +}; diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c index 11050e17ea81..c1c216f7d073 100644 --- a/drivers/soc/renesas/r8a774c0-sysc.c +++ b/drivers/soc/renesas/r8a774c0-sysc.c @@ -6,7 +6,7 @@ * Based on Renesas R-Car E3 System Controller */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a774c0_sysc_info __initconst = { .init = r8a774c0_sysc_init, .areas = r8a774c0_areas, .num_areas = ARRAY_SIZE(r8a774c0_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c index 517aa40fa6e6..e24a7151d55f 100644 --- a/drivers/soc/renesas/r8a7779-sysc.c +++ b/drivers/soc/renesas/r8a7779-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7779-sysc.h> diff --git a/drivers/soc/renesas/r8a7790-sysc.c b/drivers/soc/renesas/r8a7790-sysc.c index 9b5a6bb62152..b9afe7f6245b 100644 --- a/drivers/soc/renesas/r8a7790-sysc.c +++ b/drivers/soc/renesas/r8a7790-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7790-sysc.h> diff --git a/drivers/soc/renesas/r8a7791-sysc.c b/drivers/soc/renesas/r8a7791-sysc.c index acf545cdebfb..f00fa24522a3 100644 --- a/drivers/soc/renesas/r8a7791-sysc.c +++ b/drivers/soc/renesas/r8a7791-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7791-sysc.h> diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c index 05b78525cc43..60aae242c43f 100644 --- a/drivers/soc/renesas/r8a7792-sysc.c +++ b/drivers/soc/renesas/r8a7792-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/init.h> #include <linux/kernel.h> diff --git a/drivers/soc/renesas/r8a7794-sysc.c b/drivers/soc/renesas/r8a7794-sysc.c index 0d42637fa662..72ef4e85458f 100644 --- a/drivers/soc/renesas/r8a7794-sysc.c +++ b/drivers/soc/renesas/r8a7794-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7794-sysc.h> diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c index cda27a67de98..91074411b8cf 100644 --- a/drivers/soc/renesas/r8a7795-sysc.c +++ b/drivers/soc/renesas/r8a7795-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2016-2017 Glider bvba */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -51,25 +51,46 @@ static struct rcar_sysc_area r8a7795_areas[] __initdata = { /* - * Fixups for R-Car H3 revisions after ES1.x + * Fixups for R-Car H3 revisions */ -static const struct soc_device_attribute r8a7795es1[] __initconst = { - { .soc_id = "r8a7795", .revision = "ES1.*" }, +#define HAS_A2VC0 BIT(0) /* Power domain A2VC0 is present */ +#define NO_EXTMASK BIT(1) /* Missing SYSCEXTMASK register */ + +static const struct soc_device_attribute r8a7795_quirks_match[] __initconst = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = (void *)(HAS_A2VC0 | NO_EXTMASK), + }, { + .soc_id = "r8a7795", .revision = "ES2.*", + .data = (void *)(NO_EXTMASK), + }, { /* sentinel */ } }; static int __init r8a7795_sysc_init(void) { - if (!soc_device_match(r8a7795es1)) + const struct soc_device_attribute *attr; + u32 quirks = 0; + + attr = soc_device_match(r8a7795_quirks_match); + if (attr) + quirks = (uintptr_t)attr->data; + + if (!(quirks & HAS_A2VC0)) rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas), R8A7795_PD_A2VC0); + if (quirks & NO_EXTMASK) + r8a7795_sysc_info.extmask_val = 0; + return 0; } -const struct rcar_sysc_info r8a7795_sysc_info __initconst = { +struct rcar_sysc_info r8a7795_sysc_info __initdata = { .init = r8a7795_sysc_init, .areas = r8a7795_areas, .num_areas = ARRAY_SIZE(r8a7795_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c index 1b06f868b6e8..471bd5b3b6ad 100644 --- a/drivers/soc/renesas/r8a7796-sysc.c +++ b/drivers/soc/renesas/r8a7796-sysc.c @@ -1,18 +1,19 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Renesas R-Car M3-W System Controller + * Renesas R-Car M3-W/W+ System Controller * * Copyright (C) 2016 Glider bvba + * Copyright (C) 2018-2019 Renesas Electronics Corporation */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7796-sysc.h> #include "rcar-sysc.h" -static const struct rcar_sysc_area r8a7796_areas[] __initconst = { +static struct rcar_sysc_area r8a7796_areas[] __initdata = { { "always-on", 0, 0, R8A7796_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, { "ca57-scu", 0x1c0, 0, R8A7796_PD_CA57_SCU, R8A7796_PD_ALWAYS_ON, PD_SCU }, @@ -39,7 +40,28 @@ static const struct rcar_sysc_area r8a7796_areas[] __initconst = { { "a3ir", 0x180, 0, R8A7796_PD_A3IR, R8A7796_PD_ALWAYS_ON }, }; -const struct rcar_sysc_info r8a7796_sysc_info __initconst = { + +#ifdef CONFIG_SYSC_R8A77960 +const struct rcar_sysc_info r8a77960_sysc_info __initconst = { + .areas = r8a7796_areas, + .num_areas = ARRAY_SIZE(r8a7796_areas), +}; +#endif /* CONFIG_SYSC_R8A77960 */ + +#ifdef CONFIG_SYSC_R8A77961 +static int __init r8a77961_sysc_init(void) +{ + rcar_sysc_nullify(r8a7796_areas, ARRAY_SIZE(r8a7796_areas), + R8A7796_PD_A2VC0); + + return 0; +} + +const struct rcar_sysc_info r8a77961_sysc_info __initconst = { + .init = r8a77961_sysc_init, .areas = r8a7796_areas, .num_areas = ARRAY_SIZE(r8a7796_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; +#endif /* CONFIG_SYSC_R8A77961 */ diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c index e0533beb50fd..ff0b0d116992 100644 --- a/drivers/soc/renesas/r8a77965-sysc.c +++ b/drivers/soc/renesas/r8a77965-sysc.c @@ -7,7 +7,7 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77965-sysc.h> @@ -33,4 +33,6 @@ static const struct rcar_sysc_area r8a77965_areas[] __initconst = { const struct rcar_sysc_info r8a77965_sysc_info __initconst = { .areas = r8a77965_areas, .num_areas = ARRAY_SIZE(r8a77965_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c index 280c48b80f24..706258250600 100644 --- a/drivers/soc/renesas/r8a77970-sysc.c +++ b/drivers/soc/renesas/r8a77970-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2017 Cogent Embedded Inc. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77970-sysc.h> @@ -32,4 +32,6 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = { const struct rcar_sysc_info r8a77970_sysc_info __initconst = { .areas = r8a77970_areas, .num_areas = ARRAY_SIZE(r8a77970_areas), + .extmask_offs = 0x1b0, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c index a8dbe55e8ba8..39ca84a67daa 100644 --- a/drivers/soc/renesas/r8a77980-sysc.c +++ b/drivers/soc/renesas/r8a77980-sysc.c @@ -6,7 +6,7 @@ * Copyright (C) 2018 Cogent Embedded, Inc. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77980-sysc.h> @@ -49,4 +49,6 @@ static const struct rcar_sysc_area r8a77980_areas[] __initconst = { const struct rcar_sysc_info r8a77980_sysc_info __initconst = { .areas = r8a77980_areas, .num_areas = ARRAY_SIZE(r8a77980_areas), + .extmask_offs = 0x138, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77990-sysc.c b/drivers/soc/renesas/r8a77990-sysc.c index 664b244eb1dd..9f92737dc352 100644 --- a/drivers/soc/renesas/r8a77990-sysc.c +++ b/drivers/soc/renesas/r8a77990-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a77990_sysc_info __initconst = { .init = r8a77990_sysc_init, .areas = r8a77990_areas, .num_areas = ARRAY_SIZE(r8a77990_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77995-sysc.c b/drivers/soc/renesas/r8a77995-sysc.c index 6243aaaf60fb..efcc67e3d76d 100644 --- a/drivers/soc/renesas/r8a77995-sysc.c +++ b/drivers/soc/renesas/r8a77995-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2017 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77995-sysc.h> diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c index d183c381e8db..14d05a070dd3 100644 --- a/drivers/soc/renesas/rcar-rst.c +++ b/drivers/soc/renesas/rcar-rst.c @@ -45,6 +45,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = { { .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 }, /* RZ/G2 is handled like R-Car Gen3 */ { .compatible = "renesas,r8a774a1-rst", .data = &rcar_rst_gen3 }, + { .compatible = "renesas,r8a774b1-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a774c0-rst", .data = &rcar_rst_gen3 }, /* R-Car Gen1 */ { .compatible = "renesas,r8a7778-reset-wdt", .data = &rcar_rst_gen1 }, @@ -58,6 +59,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = { /* R-Car Gen3 */ { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 }, + { .compatible = "renesas,r8a77961-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 }, diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 59b5e6b10272..f0b291e02b8a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -63,6 +63,7 @@ struct rcar_sysc_ch { static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ +static u32 rcar_sysc_extmask_offs, rcar_sysc_extmask_val; static int rcar_sysc_pwr_on_off(const struct rcar_sysc_ch *sysc_ch, bool on) { @@ -106,6 +107,14 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) spin_lock_irqsave(&rcar_sysc_lock, flags); /* + * Mask external power requests for CPU or 3DG domains + */ + if (rcar_sysc_extmask_val) { + iowrite32(rcar_sysc_extmask_val, + rcar_sysc_base + rcar_sysc_extmask_offs); + } + + /* * The interrupt source needs to be enabled, but masked, to prevent the * CPU from receiving it. */ @@ -148,6 +157,9 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); out: + if (rcar_sysc_extmask_val) + iowrite32(0, rcar_sysc_base + rcar_sysc_extmask_offs); + spin_unlock_irqrestore(&rcar_sysc_lock, flags); pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off", @@ -275,6 +287,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = { #ifdef CONFIG_SYSC_R8A774A1 { .compatible = "renesas,r8a774a1-sysc", .data = &r8a774a1_sysc_info }, #endif +#ifdef CONFIG_SYSC_R8A774B1 + { .compatible = "renesas,r8a774b1-sysc", .data = &r8a774b1_sysc_info }, +#endif #ifdef CONFIG_SYSC_R8A774C0 { .compatible = "renesas,r8a774c0-sysc", .data = &r8a774c0_sysc_info }, #endif @@ -298,8 +313,11 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = { #ifdef CONFIG_SYSC_R8A7795 { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, #endif -#ifdef CONFIG_SYSC_R8A7796 - { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, +#ifdef CONFIG_SYSC_R8A77960 + { .compatible = "renesas,r8a7796-sysc", .data = &r8a77960_sysc_info }, +#endif +#ifdef CONFIG_SYSC_R8A77961 + { .compatible = "renesas,r8a77961-sysc", .data = &r8a77961_sysc_info }, #endif #ifdef CONFIG_SYSC_R8A77965 { .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info }, @@ -360,6 +378,10 @@ static int __init rcar_sysc_pd_init(void) rcar_sysc_base = base; + /* Optional External Request Mask Register */ + rcar_sysc_extmask_offs = info->extmask_offs; + rcar_sysc_extmask_val = info->extmask_val; + domains = kzalloc(sizeof(*domains), GFP_KERNEL); if (!domains) { error = -ENOMEM; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 485520a5b295..8d074489fba9 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -44,20 +44,25 @@ struct rcar_sysc_info { int (*init)(void); /* Optional */ const struct rcar_sysc_area *areas; unsigned int num_areas; + /* Optional External Request Mask Register */ + u32 extmask_offs; /* SYSCEXTMASK register offset */ + u32 extmask_val; /* SYSCEXTMASK register mask value */ }; extern const struct rcar_sysc_info r8a7743_sysc_info; extern const struct rcar_sysc_info r8a7745_sysc_info; extern const struct rcar_sysc_info r8a77470_sysc_info; extern const struct rcar_sysc_info r8a774a1_sysc_info; +extern const struct rcar_sysc_info r8a774b1_sysc_info; extern const struct rcar_sysc_info r8a774c0_sysc_info; extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; extern const struct rcar_sysc_info r8a7792_sysc_info; extern const struct rcar_sysc_info r8a7794_sysc_info; -extern const struct rcar_sysc_info r8a7795_sysc_info; -extern const struct rcar_sysc_info r8a7796_sysc_info; +extern struct rcar_sysc_info r8a7795_sysc_info; +extern const struct rcar_sysc_info r8a77960_sysc_info; +extern const struct rcar_sysc_info r8a77961_sysc_info; extern const struct rcar_sysc_info r8a77965_sysc_info; extern const struct rcar_sysc_info r8a77970_sysc_info; extern const struct rcar_sysc_info r8a77980_sysc_info; diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 3299cf5365f3..850f5733dc88 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -116,6 +116,11 @@ static const struct renesas_soc soc_rz_g2m __initconst __maybe_unused = { .id = 0x52, }; +static const struct renesas_soc soc_rz_g2n __initconst __maybe_unused = { + .family = &fam_rzg2, + .id = 0x55, +}; + static const struct renesas_soc soc_rz_g2e __initconst __maybe_unused = { .family = &fam_rzg2, .id = 0x57, @@ -227,6 +232,9 @@ static const struct of_device_id renesas_socs[] __initconst = { #ifdef CONFIG_ARCH_R8A774A1 { .compatible = "renesas,r8a774a1", .data = &soc_rz_g2m }, #endif +#ifdef CONFIG_ARCH_R8A774B1 + { .compatible = "renesas,r8a774b1", .data = &soc_rz_g2n }, +#endif #ifdef CONFIG_ARCH_R8A774C0 { .compatible = "renesas,r8a774c0", .data = &soc_rz_g2e }, #endif @@ -254,9 +262,12 @@ static const struct of_device_id renesas_socs[] __initconst = { #ifdef CONFIG_ARCH_R8A7795 { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 }, #endif -#ifdef CONFIG_ARCH_R8A7796 +#ifdef CONFIG_ARCH_R8A77960 { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, #endif +#ifdef CONFIG_ARCH_R8A77961 + { .compatible = "renesas,r8a77961", .data = &soc_rcar_m3_w }, +#endif #ifdef CONFIG_ARCH_R8A77965 { .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n }, #endif @@ -326,7 +337,7 @@ static int __init renesas_soc_init(void) if (np) { chipid = of_iomap(np, 0); of_node_put(np); - } else if (soc->id) { + } else if (soc->id && family->reg) { chipid = ioremap(family->reg, 4); } if (chipid) { diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 33ad0de2de3c..27fc59bbb520 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -7,6 +7,16 @@ menuconfig SOC_SAMSUNG if SOC_SAMSUNG +config EXYNOS_ASV + bool "Exynos Adaptive Supply Voltage support" if COMPILE_TEST + depends on (ARCH_EXYNOS && EXYNOS_CHIPID) || COMPILE_TEST + select EXYNOS_ASV_ARM if ARM && ARCH_EXYNOS + +# There is no need to enable these drivers for ARMv8 +config EXYNOS_ASV_ARM + bool "Exynos ASV ARMv7-specific driver extensions" if COMPILE_TEST + depends on EXYNOS_ASV + config EXYNOS_CHIPID bool "Exynos Chipid controller driver" if COMPILE_TEST depends on ARCH_EXYNOS || COMPILE_TEST diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index 3b6a8797416c..edd1d6ea064d 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_EXYNOS_ASV) += exynos-asv.o +obj-$(CONFIG_EXYNOS_ASV_ARM) += exynos5422-asv.o + obj-$(CONFIG_EXYNOS_CHIPID) += exynos-chipid.o obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c new file mode 100644 index 000000000000..30bb7b7cc769 --- /dev/null +++ b/drivers/soc/samsung/exynos-asv.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Samsung Exynos SoC Adaptive Supply Voltage support + */ + +#include <linux/cpu.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/soc/samsung/exynos-chipid.h> + +#include "exynos-asv.h" +#include "exynos5422-asv.h" + +#define MHZ 1000000U + +static int exynos_asv_update_cpu_opps(struct exynos_asv *asv, + struct device *cpu) +{ + struct exynos_asv_subsys *subsys = NULL; + struct dev_pm_opp *opp; + unsigned int opp_freq; + int i; + + for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) { + if (of_device_is_compatible(cpu->of_node, + asv->subsys[i].cpu_dt_compat)) { + subsys = &asv->subsys[i]; + break; + } + } + if (!subsys) + return -EINVAL; + + for (i = 0; i < subsys->table.num_rows; i++) { + unsigned int new_volt, volt; + int ret; + + opp_freq = exynos_asv_opp_get_frequency(subsys, i); + + opp = dev_pm_opp_find_freq_exact(cpu, opp_freq * MHZ, true); + if (IS_ERR(opp)) { + dev_info(asv->dev, "cpu%d opp%d, freq: %u missing\n", + cpu->id, i, opp_freq); + + continue; + } + + volt = dev_pm_opp_get_voltage(opp); + new_volt = asv->opp_get_voltage(subsys, i, volt); + dev_pm_opp_put(opp); + + if (new_volt == volt) + continue; + + ret = dev_pm_opp_adjust_voltage(cpu, opp_freq * MHZ, + new_volt, new_volt, new_volt); + if (ret < 0) + dev_err(asv->dev, + "Failed to adjust OPP %u Hz/%u uV for cpu%d\n", + opp_freq, new_volt, cpu->id); + else + dev_dbg(asv->dev, + "Adjusted OPP %u Hz/%u -> %u uV, cpu%d\n", + opp_freq, volt, new_volt, cpu->id); + } + + return 0; +} + +static int exynos_asv_update_opps(struct exynos_asv *asv) +{ + struct opp_table *last_opp_table = NULL; + struct device *cpu; + int ret, cpuid; + + for_each_possible_cpu(cpuid) { + struct opp_table *opp_table; + + cpu = get_cpu_device(cpuid); + if (!cpu) + continue; + + opp_table = dev_pm_opp_get_opp_table(cpu); + if (IS_ERR_OR_NULL(opp_table)) + continue; + + if (!last_opp_table || opp_table != last_opp_table) { + last_opp_table = opp_table; + + ret = exynos_asv_update_cpu_opps(asv, cpu); + if (ret < 0) + dev_err(asv->dev, "Couldn't udate OPPs for cpu%d\n", + cpuid); + } + + dev_pm_opp_put_opp_table(opp_table); + } + + return 0; +} + +static int exynos_asv_probe(struct platform_device *pdev) +{ + int (*probe_func)(struct exynos_asv *asv); + struct exynos_asv *asv; + struct device *cpu_dev; + u32 product_id = 0; + int ret, i; + + cpu_dev = get_cpu_device(0); + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret < 0) + return -EPROBE_DEFER; + + asv = devm_kzalloc(&pdev->dev, sizeof(*asv), GFP_KERNEL); + if (!asv) + return -ENOMEM; + + asv->chipid_regmap = device_node_to_regmap(pdev->dev.of_node); + if (IS_ERR(asv->chipid_regmap)) { + dev_err(&pdev->dev, "Could not find syscon regmap\n"); + return PTR_ERR(asv->chipid_regmap); + } + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id); + + switch (product_id & EXYNOS_MASK) { + case 0xE5422000: + probe_func = exynos5422_asv_init; + break; + default: + return -ENODEV; + } + + ret = of_property_read_u32(pdev->dev.of_node, "samsung,asv-bin", + &asv->of_bin); + if (ret < 0) + asv->of_bin = -EINVAL; + + asv->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, asv); + + for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) + asv->subsys[i].asv = asv; + + ret = probe_func(asv); + if (ret < 0) + return ret; + + return exynos_asv_update_opps(asv); +} + +static const struct of_device_id exynos_asv_of_device_ids[] = { + { .compatible = "samsung,exynos4210-chipid" }, + {} +}; + +static struct platform_driver exynos_asv_driver = { + .driver = { + .name = "exynos-asv", + .of_match_table = exynos_asv_of_device_ids, + }, + .probe = exynos_asv_probe, +}; +module_platform_driver(exynos_asv_driver); diff --git a/drivers/soc/samsung/exynos-asv.h b/drivers/soc/samsung/exynos-asv.h new file mode 100644 index 000000000000..3fd1f2acd999 --- /dev/null +++ b/drivers/soc/samsung/exynos-asv.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Samsung Exynos SoC Adaptive Supply Voltage support + */ +#ifndef __LINUX_SOC_EXYNOS_ASV_H +#define __LINUX_SOC_EXYNOS_ASV_H + +struct regmap; + +/* HPM, IDS values to select target group */ +struct asv_limit_entry { + unsigned int hpm; + unsigned int ids; +}; + +struct exynos_asv_table { + unsigned int num_rows; + unsigned int num_cols; + u32 *buf; +}; + +struct exynos_asv_subsys { + struct exynos_asv *asv; + const char *cpu_dt_compat; + int id; + struct exynos_asv_table table; + + unsigned int base_volt; + unsigned int offset_volt_h; + unsigned int offset_volt_l; +}; + +struct exynos_asv { + struct device *dev; + struct regmap *chipid_regmap; + struct exynos_asv_subsys subsys[2]; + + int (*opp_get_voltage)(const struct exynos_asv_subsys *subs, + int level, unsigned int voltage); + unsigned int group; + unsigned int table; + + /* True if SG fields from PKG_ID register should be used */ + bool use_sg; + /* ASV bin read from DT */ + int of_bin; +}; + +static inline u32 __asv_get_table_entry(const struct exynos_asv_table *table, + unsigned int row, unsigned int col) +{ + return table->buf[row * (table->num_cols) + col]; +} + +static inline u32 exynos_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys, + unsigned int level, unsigned int group) +{ + return __asv_get_table_entry(&subsys->table, level, group + 1); +} + +static inline u32 exynos_asv_opp_get_frequency(const struct exynos_asv_subsys *subsys, + unsigned int level) +{ + return __asv_get_table_entry(&subsys->table, level, 0); +} + +#endif /* __LINUX_SOC_EXYNOS_ASV_H */ diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c index c55a47cfe617..b89c26a71c6e 100644 --- a/drivers/soc/samsung/exynos-chipid.c +++ b/drivers/soc/samsung/exynos-chipid.c @@ -45,17 +45,25 @@ static const char * __init product_id_to_soc_id(unsigned int product_id) return NULL; } -int __init exynos_chipid_early_init(void) +static int __init exynos_chipid_early_init(void) { struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; struct device_node *root; + struct device_node *syscon; struct regmap *regmap; u32 product_id; u32 revision; int ret; - regmap = syscon_regmap_lookup_by_compatible("samsung,exynos4210-chipid"); + syscon = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-chipid"); + if (!syscon) + return ENODEV; + + regmap = device_node_to_regmap(syscon); + of_node_put(syscon); + if (IS_ERR(regmap)) return PTR_ERR(regmap); diff --git a/drivers/soc/samsung/exynos5422-asv.c b/drivers/soc/samsung/exynos5422-asv.c new file mode 100644 index 000000000000..01bb3050d678 --- /dev/null +++ b/drivers/soc/samsung/exynos5422-asv.c @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Samsung Exynos 5422 SoC Adaptive Supply Voltage support + */ + +#include <linux/bitrev.h> +#include <linux/errno.h> +#include <linux/regmap.h> +#include <linux/soc/samsung/exynos-chipid.h> +#include <linux/slab.h> + +#include "exynos-asv.h" +#include "exynos5422-asv.h" + +#define ASV_GROUPS_NUM 14 +#define ASV_ARM_DVFS_NUM 20 +#define ASV_ARM_BIN2_DVFS_NUM 17 +#define ASV_KFC_DVFS_NUM 14 +#define ASV_KFC_BIN2_DVFS_NUM 12 + +/* + * This array is a set of 4 ASV data tables, first column of each ASV table + * contains frequency value in MHz and subsequent columns contain the CPU + * cluster's supply voltage values in uV. + * In order to create a set of OPPs for specific SoC revision one of the voltage + * columns (1...14) from one of the tables (0...3) is selected during + * initialization. There are separate ASV tables for the big (ARM) and little + * (KFC) CPU cluster. Only OPPs which are already defined in devicetree + * will be updated. + */ + +static const u32 asv_arm_table[][ASV_ARM_DVFS_NUM][ASV_GROUPS_NUM + 1] = { +{ + /* ARM 0, 1 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, + 1162500, 1150000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1800, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1700, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 }, + { 1600, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 }, + { 1500, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 }, + { 1400, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 975000, 962500, 950000, 937500, 925000 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM 2 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1312500, 1300000, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1262500, 1250000, 1250000, 1237500, 1212500, 1200000, 1187500, + 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 }, + { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, + 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 }, + { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, + 987500, 975000, 987500, 975000, 962500, 950000, 937500 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM 3 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, + 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 }, + { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, + 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 }, + { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, + 987500, 975000, 987500, 975000, 962500, 950000, 937500 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM bin 2 */ + { 1800, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, + 1150000, 1137500, 1150000, 1137500, 1125000, 1112500, 1100000 }, + { 1700, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1600, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 }, + { 1500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 }, + { 1400, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1300, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 }, + { 1200, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 975000, 962500, 950000, 937500, 925000 }, + { 1100, 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500, + 950000, 937500, 950000, 937500, 925000, 912500, 900000 }, + { 1000, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500, + 925000, 912500, 925000, 912500, 900000, 900000, 900000 }, + { 900, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 962500, 950000, 937500, 925000, 912500, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 937500, 925000, 912500, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +} +}; + +static const u32 asv_kfc_table[][ASV_KFC_DVFS_NUM][ASV_GROUPS_NUM + 1] = { +{ + /* KFC 0, 1 */ + { 1500000, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400000, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100000, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800000, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700000, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600000, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500000, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC 2 */ + { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC 3 */ + { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC bin 2 */ + { 1300, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, + 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500 }, + { 1200, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1100, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1000, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500 }, + { 900, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 975000, 962500, 950000, 937500, 925000 }, + { 800, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 937500, 925000, 912500, 900000, 900000 }, + { 700, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500, + 925000, 912500, 900000, 900000, 900000, 900000, 900000 }, + { 600, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 937500, 925000, 912500, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +} +}; + +static const struct asv_limit_entry __asv_limits[ASV_GROUPS_NUM] = { + { 13, 55 }, + { 21, 65 }, + { 25, 69 }, + { 30, 72 }, + { 36, 74 }, + { 43, 76 }, + { 51, 78 }, + { 65, 80 }, + { 81, 82 }, + { 98, 84 }, + { 119, 87 }, + { 135, 89 }, + { 150, 92 }, + { 999, 999 }, +}; + +static int exynos5422_asv_get_group(struct exynos_asv *asv) +{ + unsigned int pkgid_reg, auxi_reg; + int hpm, ids, i; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkgid_reg); + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &auxi_reg); + + if (asv->use_sg) { + u32 sga = (pkgid_reg >> EXYNOS5422_SG_A_OFFSET) & + EXYNOS5422_SG_A_MASK; + + u32 sgb = (pkgid_reg >> EXYNOS5422_SG_B_OFFSET) & + EXYNOS5422_SG_B_MASK; + + if ((pkgid_reg >> EXYNOS5422_SG_BSIGN_OFFSET) & + EXYNOS5422_SG_BSIGN_MASK) + return sga + sgb; + else + return sga - sgb; + } + + hpm = (auxi_reg >> EXYNOS5422_TMCB_OFFSET) & EXYNOS5422_TMCB_MASK; + ids = (pkgid_reg >> EXYNOS5422_IDS_OFFSET) & EXYNOS5422_IDS_MASK; + + for (i = 0; i < ASV_GROUPS_NUM; i++) { + if (ids <= __asv_limits[i].ids) + break; + if (hpm <= __asv_limits[i].hpm) + break; + } + if (i < ASV_GROUPS_NUM) + return i; + + return 0; +} + +static int __asv_offset_voltage(unsigned int index) +{ + switch (index) { + case 1: + return 12500; + case 2: + return 50000; + case 3: + return 25000; + default: + return 0; + }; +} + +static void exynos5422_asv_offset_voltage_setup(struct exynos_asv *asv) +{ + struct exynos_asv_subsys *subsys; + unsigned int reg, value; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, ®); + + /* ARM offset voltage setup */ + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM]; + + subsys->base_volt = 1000000; + + value = (reg >> EXYNOS5422_ARM_UP_OFFSET) & EXYNOS5422_ARM_UP_MASK; + subsys->offset_volt_h = __asv_offset_voltage(value); + + value = (reg >> EXYNOS5422_ARM_DN_OFFSET) & EXYNOS5422_ARM_DN_MASK; + subsys->offset_volt_l = __asv_offset_voltage(value); + + /* KFC offset voltage setup */ + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC]; + + subsys->base_volt = 1000000; + + value = (reg >> EXYNOS5422_KFC_UP_OFFSET) & EXYNOS5422_KFC_UP_MASK; + subsys->offset_volt_h = __asv_offset_voltage(value); + + value = (reg >> EXYNOS5422_KFC_DN_OFFSET) & EXYNOS5422_KFC_DN_MASK; + subsys->offset_volt_l = __asv_offset_voltage(value); +} + +static int exynos5422_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys, + int level, unsigned int volt) +{ + unsigned int asv_volt; + + if (level >= subsys->table.num_rows) + return volt; + + asv_volt = exynos_asv_opp_get_voltage(subsys, level, + subsys->asv->group); + + if (volt > subsys->base_volt) + asv_volt += subsys->offset_volt_h; + else + asv_volt += subsys->offset_volt_l; + + return asv_volt; +} + +static unsigned int exynos5422_asv_parse_table(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_TABLE_OFFSET) & EXYNOS5422_TABLE_MASK; +} + +static bool exynos5422_asv_parse_bin2(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_BIN2_OFFSET) & EXYNOS5422_BIN2_MASK; +} + +static bool exynos5422_asv_parse_sg(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_USESG_OFFSET) & EXYNOS5422_USESG_MASK; +} + +int exynos5422_asv_init(struct exynos_asv *asv) +{ + struct exynos_asv_subsys *subsys; + unsigned int table_index; + unsigned int pkg_id; + bool bin2; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkg_id); + + if (asv->of_bin == 2) { + bin2 = true; + asv->use_sg = false; + } else { + asv->use_sg = exynos5422_asv_parse_sg(pkg_id); + bin2 = exynos5422_asv_parse_bin2(pkg_id); + } + + asv->group = exynos5422_asv_get_group(asv); + asv->table = exynos5422_asv_parse_table(pkg_id); + + exynos5422_asv_offset_voltage_setup(asv); + + if (bin2) { + table_index = 3; + } else { + if (asv->table == 2 || asv->table == 3) + table_index = asv->table - 1; + else + table_index = 0; + } + + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM]; + subsys->cpu_dt_compat = "arm,cortex-a15"; + if (bin2) + subsys->table.num_rows = ASV_ARM_BIN2_DVFS_NUM; + else + subsys->table.num_rows = ASV_ARM_DVFS_NUM; + subsys->table.num_cols = ASV_GROUPS_NUM + 1; + subsys->table.buf = (u32 *)asv_arm_table[table_index]; + + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC]; + subsys->cpu_dt_compat = "arm,cortex-a7"; + if (bin2) + subsys->table.num_rows = ASV_KFC_BIN2_DVFS_NUM; + else + subsys->table.num_rows = ASV_KFC_DVFS_NUM; + subsys->table.num_cols = ASV_GROUPS_NUM + 1; + subsys->table.buf = (u32 *)asv_kfc_table[table_index]; + + asv->opp_get_voltage = exynos5422_asv_opp_get_voltage; + + return 0; +} diff --git a/drivers/soc/samsung/exynos5422-asv.h b/drivers/soc/samsung/exynos5422-asv.h new file mode 100644 index 000000000000..95a5fb1a7508 --- /dev/null +++ b/drivers/soc/samsung/exynos5422-asv.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Samsung Exynos 5422 SoC Adaptive Supply Voltage support + */ + +#ifndef __LINUX_SOC_EXYNOS5422_ASV_H +#define __LINUX_SOC_EXYNOS5422_ASV_H + +#include <linux/errno.h> + +enum { + EXYNOS_ASV_SUBSYS_ID_ARM, + EXYNOS_ASV_SUBSYS_ID_KFC, + EXYNOS_ASV_SUBSYS_ID_MAX +}; + +struct exynos_asv; + +#ifdef CONFIG_EXYNOS_ASV_ARM +int exynos5422_asv_init(struct exynos_asv *asv); +#else +static inline int exynos5422_asv_init(struct exynos_asv *asv) +{ + return -ENOTSUPP; +} +#endif + +#endif /* __LINUX_SOC_EXYNOS5422_ASV_H */ diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig index c8ef05d6b8c7..84bd615c4a92 100644 --- a/drivers/soc/tegra/Kconfig +++ b/drivers/soc/tegra/Kconfig @@ -15,6 +15,7 @@ config ARCH_TEGRA_2x_SOC select PL310_ERRATA_769419 if CACHE_L2X0 select SOC_TEGRA_FLOWCTRL select SOC_TEGRA_PMC + select SOC_TEGRA20_VOLTAGE_COUPLER select TEGRA_TIMER help Support for NVIDIA Tegra AP20 and T20 processors, based on the @@ -28,6 +29,7 @@ config ARCH_TEGRA_3x_SOC select PL310_ERRATA_769419 if CACHE_L2X0 select SOC_TEGRA_FLOWCTRL select SOC_TEGRA_PMC + select SOC_TEGRA30_VOLTAGE_COUPLER select TEGRA_TIMER help Support for NVIDIA Tegra T30 processor family, based on the @@ -135,3 +137,11 @@ config SOC_TEGRA_POWERGATE_BPMP def_bool y depends on PM_GENERIC_DOMAINS depends on TEGRA_BPMP + +config SOC_TEGRA20_VOLTAGE_COUPLER + bool "Voltage scaling support for Tegra20 SoCs" + depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST + +config SOC_TEGRA30_VOLTAGE_COUPLER + bool "Voltage scaling support for Tegra30 SoCs" + depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile index 902759fe5f4d..9c809c1814bd 100644 --- a/drivers/soc/tegra/Makefile +++ b/drivers/soc/tegra/Makefile @@ -5,3 +5,5 @@ obj-y += common.o obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o +obj-$(CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER) += regulators-tegra20.o +obj-$(CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER) += regulators-tegra30.o diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c index 3eb44e65b326..4d719d4b8d5a 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra.c +++ b/drivers/soc/tegra/fuse/fuse-tegra.c @@ -8,6 +8,8 @@ #include <linux/kobject.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/nvmem-consumer.h> +#include <linux/nvmem-provider.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -31,50 +33,6 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04] = "A04", }; -static u8 fuse_readb(struct tegra_fuse *fuse, unsigned int offset) -{ - u32 val; - - val = fuse->read(fuse, round_down(offset, 4)); - val >>= (offset % 4) * 8; - val &= 0xff; - - return val; -} - -static ssize_t fuse_read(struct file *fd, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t pos, size_t size) -{ - struct device *dev = kobj_to_dev(kobj); - struct tegra_fuse *fuse = dev_get_drvdata(dev); - int i; - - if (pos < 0 || pos >= attr->size) - return 0; - - if (size > attr->size - pos) - size = attr->size - pos; - - for (i = 0; i < size; i++) - buf[i] = fuse_readb(fuse, pos + i); - - return i; -} - -static struct bin_attribute fuse_bin_attr = { - .attr = { .name = "fuse", .mode = S_IRUGO, }, - .read = fuse_read, -}; - -static int tegra_fuse_create_sysfs(struct device *dev, unsigned int size, - const struct tegra_fuse_info *info) -{ - fuse_bin_attr.size = size; - - return device_create_bin_file(dev, &fuse_bin_attr); -} - static const struct of_device_id car_match[] __initconst = { { .compatible = "nvidia,tegra20-car", }, { .compatible = "nvidia,tegra30-car", }, @@ -115,9 +73,111 @@ static const struct of_device_id tegra_fuse_match[] = { { /* sentinel */ } }; +static int tegra_fuse_read(void *priv, unsigned int offset, void *value, + size_t bytes) +{ + unsigned int count = bytes / 4, i; + struct tegra_fuse *fuse = priv; + u32 *buffer = value; + + for (i = 0; i < count; i++) + buffer[i] = fuse->read(fuse, offset + i * 4); + + return 0; +} + +static const struct nvmem_cell_info tegra_fuse_cells[] = { + { + .name = "tsensor-cpu1", + .offset = 0x084, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu2", + .offset = 0x088, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu0", + .offset = 0x098, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "xusb-pad-calibration", + .offset = 0x0f0, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-cpu3", + .offset = 0x12c, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "sata-calibration", + .offset = 0x124, + .bytes = 1, + .bit_offset = 0, + .nbits = 2, + }, { + .name = "tsensor-gpu", + .offset = 0x154, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-mem0", + .offset = 0x158, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-mem1", + .offset = 0x15c, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-pllx", + .offset = 0x160, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-common", + .offset = 0x180, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "tsensor-realignment", + .offset = 0x1fc, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "gpu-calibration", + .offset = 0x204, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, { + .name = "xusb-pad-calibration-ext", + .offset = 0x250, + .bytes = 4, + .bit_offset = 0, + .nbits = 32, + }, +}; + static int tegra_fuse_probe(struct platform_device *pdev) { void __iomem *base = fuse->base; + struct nvmem_config nvmem; struct resource *res; int err; @@ -146,20 +206,42 @@ static int tegra_fuse_probe(struct platform_device *pdev) if (fuse->soc->probe) { err = fuse->soc->probe(fuse); - if (err < 0) { - fuse->base = base; - return err; - } + if (err < 0) + goto restore; } - if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size, - fuse->soc->info)) - return -ENODEV; + memset(&nvmem, 0, sizeof(nvmem)); + nvmem.dev = &pdev->dev; + nvmem.name = "fuse"; + nvmem.id = -1; + nvmem.owner = THIS_MODULE; + nvmem.cells = tegra_fuse_cells; + nvmem.ncells = ARRAY_SIZE(tegra_fuse_cells); + nvmem.type = NVMEM_TYPE_OTP; + nvmem.read_only = true; + nvmem.root_only = true; + nvmem.reg_read = tegra_fuse_read; + nvmem.size = fuse->soc->info->size; + nvmem.word_size = 4; + nvmem.stride = 4; + nvmem.priv = fuse; + + fuse->nvmem = devm_nvmem_register(&pdev->dev, &nvmem); + if (IS_ERR(fuse->nvmem)) { + err = PTR_ERR(fuse->nvmem); + dev_err(&pdev->dev, "failed to register NVMEM device: %d\n", + err); + goto restore; + } /* release the early I/O memory mapping */ iounmap(base); return 0; + +restore: + fuse->base = base; + return err; } static struct platform_driver tegra_fuse_driver = { @@ -186,9 +268,12 @@ u32 __init tegra_fuse_read_early(unsigned int offset) int tegra_fuse_readl(unsigned long offset, u32 *value) { - if (!fuse->read) + if (!fuse->read || !fuse->clk) return -EPROBE_DEFER; + if (IS_ERR(fuse->clk)) + return PTR_ERR(fuse->clk); + *value = fuse->read(fuse, offset); return 0; @@ -338,6 +423,15 @@ static int __init tegra_init_fuse(void) pr_debug("Tegra CPU Speedo ID %d, SoC Speedo ID %d\n", tegra_sku_info.cpu_speedo_id, tegra_sku_info.soc_speedo_id); + if (fuse->soc->lookups) { + size_t size = sizeof(*fuse->lookups) * fuse->soc->num_lookups; + + fuse->lookups = kmemdup(fuse->soc->lookups, size, GFP_KERNEL); + if (!fuse->lookups) + return -ENOMEM; + + nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups); + } return 0; } diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c index be9424a87173..b8daaf5b7291 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra30.c +++ b/drivers/soc/tegra/fuse/fuse-tegra30.c @@ -8,6 +8,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/nvmem-consumer.h> #include <linux/of_device.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -127,6 +128,70 @@ const struct tegra_fuse_soc tegra114_fuse_soc = { #endif #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) +static const struct nvmem_cell_lookup tegra124_fuse_lookups[] = { + { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration", + .dev_id = "7009f000.padctl", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "sata-calibration", + .dev_id = "70020000.sata", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-common", + .dev_id = "700e2000.thermal-sensor", + .con_id = "common", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-realignment", + .dev_id = "700e2000.thermal-sensor", + .con_id = "realignment", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu0", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu2", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu2", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu3", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu3", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem0", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-gpu", + .dev_id = "700e2000.thermal-sensor", + .con_id = "gpu", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-pllx", + .dev_id = "700e2000.thermal-sensor", + .con_id = "pllx", + }, +}; + static const struct tegra_fuse_info tegra124_fuse_info = { .read = tegra30_fuse_read, .size = 0x300, @@ -137,10 +202,81 @@ const struct tegra_fuse_soc tegra124_fuse_soc = { .init = tegra30_fuse_init, .speedo_init = tegra124_init_speedo_data, .info = &tegra124_fuse_info, + .lookups = tegra124_fuse_lookups, + .num_lookups = ARRAY_SIZE(tegra124_fuse_lookups), }; #endif #if defined(CONFIG_ARCH_TEGRA_210_SOC) +static const struct nvmem_cell_lookup tegra210_fuse_lookups[] = { + { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu2", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu2", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu0", + }, { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration", + .dev_id = "7009f000.padctl", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-cpu3", + .dev_id = "700e2000.thermal-sensor", + .con_id = "cpu3", + }, { + .nvmem_name = "fuse", + .cell_name = "sata-calibration", + .dev_id = "70020000.sata", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-gpu", + .dev_id = "700e2000.thermal-sensor", + .con_id = "gpu", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem0", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem0", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-mem1", + .dev_id = "700e2000.thermal-sensor", + .con_id = "mem1", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-pllx", + .dev_id = "700e2000.thermal-sensor", + .con_id = "pllx", + }, { + .nvmem_name = "fuse", + .cell_name = "tsensor-common", + .dev_id = "700e2000.thermal-sensor", + .con_id = "common", + }, { + .nvmem_name = "fuse", + .cell_name = "gpu-calibration", + .dev_id = "57000000.gpu", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration-ext", + .dev_id = "7009f000.padctl", + .con_id = "calibration-ext", + }, +}; + static const struct tegra_fuse_info tegra210_fuse_info = { .read = tegra30_fuse_read, .size = 0x300, @@ -151,10 +287,26 @@ const struct tegra_fuse_soc tegra210_fuse_soc = { .init = tegra30_fuse_init, .speedo_init = tegra210_init_speedo_data, .info = &tegra210_fuse_info, + .lookups = tegra210_fuse_lookups, + .num_lookups = ARRAY_SIZE(tegra210_fuse_lookups), }; #endif #if defined(CONFIG_ARCH_TEGRA_186_SOC) +static const struct nvmem_cell_lookup tegra186_fuse_lookups[] = { + { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration", + .dev_id = "3520000.padctl", + .con_id = "calibration", + }, { + .nvmem_name = "fuse", + .cell_name = "xusb-pad-calibration-ext", + .dev_id = "3520000.padctl", + .con_id = "calibration-ext", + }, +}; + static const struct tegra_fuse_info tegra186_fuse_info = { .read = tegra30_fuse_read, .size = 0x300, @@ -164,5 +316,7 @@ static const struct tegra_fuse_info tegra186_fuse_info = { const struct tegra_fuse_soc tegra186_fuse_soc = { .init = tegra30_fuse_init, .info = &tegra186_fuse_info, + .lookups = tegra186_fuse_lookups, + .num_lookups = ARRAY_SIZE(tegra186_fuse_lookups), }; #endif diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h index 7230cb330503..0f74c2c34af0 100644 --- a/drivers/soc/tegra/fuse/fuse.h +++ b/drivers/soc/tegra/fuse/fuse.h @@ -13,6 +13,8 @@ #include <linux/dmaengine.h> #include <linux/types.h> +struct nvmem_cell_lookup; +struct nvmem_device; struct tegra_fuse; struct tegra_fuse_info { @@ -27,6 +29,9 @@ struct tegra_fuse_soc { int (*probe)(struct tegra_fuse *fuse); const struct tegra_fuse_info *info; + + const struct nvmem_cell_lookup *lookups; + unsigned int num_lookups; }; struct tegra_fuse { @@ -48,6 +53,9 @@ struct tegra_fuse { dma_addr_t phys; u32 *virt; } apbdma; + + struct nvmem_device *nvmem; + struct nvmem_cell_lookup *lookups; }; void tegra_init_revision(void); diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 9f9c1c677cf4..8db63cfba833 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -56,8 +56,14 @@ #define PMC_CNTRL_SIDE_EFFECT_LP0 BIT(14) /* LP0 when CPU pwr gated */ #define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */ #define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */ +#define PMC_CNTRL_PWRREQ_POLARITY BIT(8) #define PMC_CNTRL_MAIN_RST BIT(4) +#define PMC_WAKE_MASK 0x0c +#define PMC_WAKE_LEVEL 0x10 +#define PMC_WAKE_STATUS 0x14 +#define PMC_SW_WAKE_STATUS 0x18 + #define DPD_SAMPLE 0x020 #define DPD_SAMPLE_ENABLE BIT(0) #define DPD_SAMPLE_DISABLE (0 << 0) @@ -82,11 +88,18 @@ #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc +#define PMC_COREPWRGOOD_TIMER 0x3c +#define PMC_COREPWROFF_TIMER 0xe0 #define PMC_PWR_DET_VALUE 0xe4 #define PMC_SCRATCH41 0x140 +#define PMC_WAKE2_MASK 0x160 +#define PMC_WAKE2_LEVEL 0x164 +#define PMC_WAKE2_STATUS 0x168 +#define PMC_SW_WAKE2_STATUS 0x16c + #define PMC_SENSOR_CTRL 0x1b0 #define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2) #define PMC_SENSOR_CTRL_ENABLE_RST BIT(1) @@ -226,6 +239,8 @@ struct tegra_pmc_soc { void (*setup_irq_polarity)(struct tegra_pmc *pmc, struct device_node *np, bool invert); + int (*irq_set_wake)(struct irq_data *data, unsigned int on); + int (*irq_set_type)(struct irq_data *data, unsigned int type); const char * const *reset_sources; unsigned int num_reset_sources; @@ -309,6 +324,7 @@ static const char * const tegra210_reset_sources[] = { * @pctl_dev: pin controller exposed by the PMC * @domain: IRQ domain provided by the PMC * @irq: chip implementation for the IRQ domain + * @clk_nb: pclk clock changes handler */ struct tegra_pmc { struct device *dev; @@ -344,6 +360,8 @@ struct tegra_pmc { struct irq_domain *domain; struct irq_chip irq; + + struct notifier_block clk_nb; }; static struct tegra_pmc *pmc = &(struct tegra_pmc) { @@ -1192,7 +1210,7 @@ static int tegra_io_pad_prepare(struct tegra_pmc *pmc, enum tegra_io_pad id, return err; if (pmc->clk) { - rate = clk_get_rate(pmc->clk); + rate = pmc->rate; if (!rate) { dev_err(pmc->dev, "failed to get clock rate\n"); return -ENODEV; @@ -1433,6 +1451,7 @@ void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode) void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode) { unsigned long long rate = 0; + u64 ticks; u32 value; switch (mode) { @@ -1441,7 +1460,7 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode) break; case TEGRA_SUSPEND_LP2: - rate = clk_get_rate(pmc->clk); + rate = pmc->rate; break; default: @@ -1451,21 +1470,13 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode) if (WARN_ON_ONCE(rate == 0)) rate = 100000000; - if (rate != pmc->rate) { - u64 ticks; - - ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1; - do_div(ticks, USEC_PER_SEC); - tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER); + ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1; + do_div(ticks, USEC_PER_SEC); + tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER); - ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1; - do_div(ticks, USEC_PER_SEC); - tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER); - - wmb(); - - pmc->rate = rate; - } + ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1; + do_div(ticks, USEC_PER_SEC); + tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER); value = tegra_pmc_readl(pmc, PMC_CNTRL); value &= ~PMC_CNTRL_SIDE_EFFECT_LP0; @@ -1899,6 +1910,20 @@ static int tegra_pmc_irq_alloc(struct irq_domain *domain, unsigned int virq, event->id, &pmc->irq, pmc); + /* + * GPIOs don't have an equivalent interrupt in the + * parent controller (GIC). However some code, such + * as the one in irq_get_irqchip_state(), require a + * valid IRQ chip to be set. Make sure that's the + * case by passing NULL here, which will install a + * dummy IRQ chip for the interrupt in the parent + * domain. + */ + if (domain->parent) + irq_domain_set_hwirq_and_chip(domain->parent, + virq, 0, NULL, + NULL); + break; } } @@ -1908,10 +1933,22 @@ static int tegra_pmc_irq_alloc(struct irq_domain *domain, unsigned int virq, * dummy hardware IRQ number. This is used in the ->irq_set_type() * and ->irq_set_wake() callbacks to return early for these IRQs. */ - if (i == soc->num_wake_events) + if (i == soc->num_wake_events) { err = irq_domain_set_hwirq_and_chip(domain, virq, ULONG_MAX, &pmc->irq, pmc); + /* + * Interrupts without a wake event don't have a corresponding + * interrupt in the parent controller (GIC). Pass NULL for the + * chip here, which causes a dummy IRQ chip to be installed + * for the interrupt in the parent domain, to make this + * explicit. + */ + if (domain->parent) + irq_domain_set_hwirq_and_chip(domain->parent, virq, 0, + NULL, NULL); + } + return err; } @@ -1920,7 +1957,87 @@ static const struct irq_domain_ops tegra_pmc_irq_domain_ops = { .alloc = tegra_pmc_irq_alloc, }; -static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on) +static int tegra210_pmc_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data); + unsigned int offset, bit; + u32 value; + + if (data->hwirq == ULONG_MAX) + return 0; + + offset = data->hwirq / 32; + bit = data->hwirq % 32; + + /* clear wake status */ + tegra_pmc_writel(pmc, 0, PMC_SW_WAKE_STATUS); + tegra_pmc_writel(pmc, 0, PMC_SW_WAKE2_STATUS); + + tegra_pmc_writel(pmc, 0, PMC_WAKE_STATUS); + tegra_pmc_writel(pmc, 0, PMC_WAKE2_STATUS); + + /* enable PMC wake */ + if (data->hwirq >= 32) + offset = PMC_WAKE2_MASK; + else + offset = PMC_WAKE_MASK; + + value = tegra_pmc_readl(pmc, offset); + + if (on) + value |= BIT(bit); + else + value &= ~BIT(bit); + + tegra_pmc_writel(pmc, value, offset); + + return 0; +} + +static int tegra210_pmc_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data); + unsigned int offset, bit; + u32 value; + + if (data->hwirq == ULONG_MAX) + return 0; + + offset = data->hwirq / 32; + bit = data->hwirq % 32; + + if (data->hwirq >= 32) + offset = PMC_WAKE2_LEVEL; + else + offset = PMC_WAKE_LEVEL; + + value = tegra_pmc_readl(pmc, offset); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + value |= BIT(bit); + break; + + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + value &= ~BIT(bit); + break; + + case IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING: + value ^= BIT(bit); + break; + + default: + return -EINVAL; + } + + tegra_pmc_writel(pmc, value, offset); + + return 0; +} + +static int tegra186_pmc_irq_set_wake(struct irq_data *data, unsigned int on) { struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data); unsigned int offset, bit; @@ -1952,7 +2069,7 @@ static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on) return 0; } -static int tegra_pmc_irq_set_type(struct irq_data *data, unsigned int type) +static int tegra186_pmc_irq_set_type(struct irq_data *data, unsigned int type) { struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data); u32 value; @@ -2006,8 +2123,8 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc) pmc->irq.irq_unmask = irq_chip_unmask_parent; pmc->irq.irq_eoi = irq_chip_eoi_parent; pmc->irq.irq_set_affinity = irq_chip_set_affinity_parent; - pmc->irq.irq_set_type = tegra_pmc_irq_set_type; - pmc->irq.irq_set_wake = tegra_pmc_irq_set_wake; + pmc->irq.irq_set_type = pmc->soc->irq_set_type; + pmc->irq.irq_set_wake = pmc->soc->irq_set_wake; pmc->domain = irq_domain_add_hierarchy(parent, 0, 96, pmc->dev->of_node, &tegra_pmc_irq_domain_ops, pmc); @@ -2019,6 +2136,33 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc) return 0; } +static int tegra_pmc_clk_notify_cb(struct notifier_block *nb, + unsigned long action, void *ptr) +{ + struct tegra_pmc *pmc = container_of(nb, struct tegra_pmc, clk_nb); + struct clk_notifier_data *data = ptr; + + switch (action) { + case PRE_RATE_CHANGE: + mutex_lock(&pmc->powergates_lock); + break; + + case POST_RATE_CHANGE: + pmc->rate = data->new_rate; + /* fall through */ + + case ABORT_RATE_CHANGE: + mutex_unlock(&pmc->powergates_lock); + break; + + default: + WARN_ON_ONCE(1); + return notifier_from_errno(-EINVAL); + } + + return NOTIFY_OK; +} + static int tegra_pmc_probe(struct platform_device *pdev) { void __iomem *base; @@ -2082,6 +2226,23 @@ static int tegra_pmc_probe(struct platform_device *pdev) pmc->clk = NULL; } + /* + * PCLK clock rate can't be retrieved using CLK API because it + * causes lockup if CPU enters LP2 idle state from some other + * CLK notifier, hence we're caching the rate's value locally. + */ + if (pmc->clk) { + pmc->clk_nb.notifier_call = tegra_pmc_clk_notify_cb; + err = clk_notifier_register(pmc->clk, &pmc->clk_nb); + if (err) { + dev_err(&pdev->dev, + "failed to register clk notifier\n"); + return err; + } + + pmc->rate = clk_get_rate(pmc->clk); + } + pmc->dev = &pdev->dev; tegra_pmc_init(pmc); @@ -2133,6 +2294,8 @@ cleanup_debugfs: cleanup_sysfs: device_remove_file(&pdev->dev, &dev_attr_reset_reason); device_remove_file(&pdev->dev, &dev_attr_reset_level); + clk_notifier_unregister(pmc->clk, &pmc->clk_nb); + return err; } @@ -2184,7 +2347,7 @@ static const struct tegra_pmc_regs tegra20_pmc_regs = { static void tegra20_pmc_init(struct tegra_pmc *pmc) { - u32 value; + u32 value, osc, pmu, off; /* Always enable CPU power request */ value = tegra_pmc_readl(pmc, PMC_CNTRL); @@ -2198,6 +2361,11 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc) else value |= PMC_CNTRL_SYSCLK_POLARITY; + if (pmc->corereq_high) + value &= ~PMC_CNTRL_PWRREQ_POLARITY; + else + value |= PMC_CNTRL_PWRREQ_POLARITY; + /* configure the output polarity while the request is tristated */ tegra_pmc_writel(pmc, value, PMC_CNTRL); @@ -2205,6 +2373,16 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc) value = tegra_pmc_readl(pmc, PMC_CNTRL); value |= PMC_CNTRL_SYSCLK_OE; tegra_pmc_writel(pmc, value, PMC_CNTRL); + + /* program core timings which are applicable only for suspend state */ + if (pmc->suspend_mode != TEGRA_SUSPEND_NONE) { + osc = DIV_ROUND_UP(pmc->core_osc_time * 8192, 1000000); + pmu = DIV_ROUND_UP(pmc->core_pmu_time * 32768, 1000000); + off = DIV_ROUND_UP(pmc->core_off_time * 32768, 1000000); + tegra_pmc_writel(pmc, ((osc << 8) & 0xff00) | (pmu & 0xff), + PMC_COREPWRGOOD_TIMER); + tegra_pmc_writel(pmc, off, PMC_COREPWROFF_TIMER); + } } static void tegra20_pmc_setup_irq_polarity(struct tegra_pmc *pmc, @@ -2538,6 +2716,10 @@ static const struct pinctrl_pin_desc tegra210_pin_descs[] = { TEGRA210_IO_PAD_TABLE(TEGRA_IO_PIN_DESC) }; +static const struct tegra_wake_event tegra210_wake_events[] = { + TEGRA_WAKE_IRQ("rtc", 16, 2), +}; + static const struct tegra_pmc_soc tegra210_pmc_soc = { .num_powergates = ARRAY_SIZE(tegra210_powergates), .powergates = tegra210_powergates, @@ -2555,10 +2737,14 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = { .regs = &tegra20_pmc_regs, .init = tegra20_pmc_init, .setup_irq_polarity = tegra20_pmc_setup_irq_polarity, + .irq_set_wake = tegra210_pmc_irq_set_wake, + .irq_set_type = tegra210_pmc_irq_set_type, .reset_sources = tegra210_reset_sources, .num_reset_sources = ARRAY_SIZE(tegra210_reset_sources), .reset_levels = NULL, .num_reset_levels = 0, + .num_wake_events = ARRAY_SIZE(tegra210_wake_events), + .wake_events = tegra210_wake_events, }; #define TEGRA186_IO_PAD_TABLE(_pad) \ @@ -2680,6 +2866,8 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = { .regs = &tegra186_pmc_regs, .init = NULL, .setup_irq_polarity = tegra186_pmc_setup_irq_polarity, + .irq_set_wake = tegra186_pmc_irq_set_wake, + .irq_set_type = tegra186_pmc_irq_set_type, .reset_sources = tegra186_reset_sources, .num_reset_sources = ARRAY_SIZE(tegra186_reset_sources), .reset_levels = tegra186_reset_levels, diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c new file mode 100644 index 000000000000..ea0eede48802 --- /dev/null +++ b/drivers/soc/tegra/regulators-tegra20.c @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Voltage regulators coupler for NVIDIA Tegra20 + * Copyright (C) 2019 GRATE-DRIVER project + * + * Voltage constraints borrowed from downstream kernel sources + * Copyright (C) 2010-2011 NVIDIA Corporation + */ + +#define pr_fmt(fmt) "tegra voltage-coupler: " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/regulator/coupler.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +struct tegra_regulator_coupler { + struct regulator_coupler coupler; + struct regulator_dev *core_rdev; + struct regulator_dev *cpu_rdev; + struct regulator_dev *rtc_rdev; + int core_min_uV; +}; + +static inline struct tegra_regulator_coupler * +to_tegra_coupler(struct regulator_coupler *coupler) +{ + return container_of(coupler, struct tegra_regulator_coupler, coupler); +} + +static int tegra20_core_limit(struct tegra_regulator_coupler *tegra, + struct regulator_dev *core_rdev) +{ + int core_min_uV = 0; + int core_max_uV; + int core_cur_uV; + int err; + + if (tegra->core_min_uV > 0) + return tegra->core_min_uV; + + core_cur_uV = regulator_get_voltage_rdev(core_rdev); + if (core_cur_uV < 0) + return core_cur_uV; + + core_max_uV = max(core_cur_uV, 1200000); + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + /* + * Limit minimum CORE voltage to a value left from bootloader or, + * if it's unreasonably low value, to the most common 1.2v or to + * whatever maximum value defined via board's device-tree. + */ + tegra->core_min_uV = core_max_uV; + + pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV); + + return tegra->core_min_uV; +} + +static int tegra20_core_rtc_max_spread(struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + struct coupling_desc *c_desc = &core_rdev->coupling_desc; + struct regulator_dev *rdev; + int max_spread; + unsigned int i; + + for (i = 1; i < c_desc->n_coupled; i++) { + max_spread = core_rdev->constraints->max_spread[i - 1]; + rdev = c_desc->coupled_rdevs[i]; + + if (rdev == rtc_rdev && max_spread) + return max_spread; + } + + pr_err_once("rtc-core max-spread is undefined in device-tree\n"); + + return 150000; +} + +static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev, + int cpu_uV, int cpu_min_uV) +{ + int core_min_uV, core_max_uV = INT_MAX; + int rtc_min_uV, rtc_max_uV = INT_MAX; + int core_target_uV; + int rtc_target_uV; + int max_spread; + int core_uV; + int rtc_uV; + int err; + + /* + * RTC and CORE voltages should be no more than 170mV from each other, + * CPU should be below RTC and CORE by at least 120mV. This applies + * to all Tegra20 SoC's. + */ + max_spread = tegra20_core_rtc_max_spread(core_rdev, rtc_rdev); + + /* + * The core voltage scaling is currently not hooked up in drivers, + * hence we will limit the minimum core voltage to a reasonable value. + * This should be good enough for the time being. + */ + core_min_uV = tegra20_core_limit(tegra, core_rdev); + if (core_min_uV < 0) + return core_min_uV; + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + core_uV = regulator_get_voltage_rdev(core_rdev); + if (core_uV < 0) + return core_uV; + + core_min_uV = max(cpu_min_uV + 125000, core_min_uV); + if (core_min_uV > core_max_uV) + return -EINVAL; + + if (cpu_uV + 120000 > core_uV) + pr_err("core-cpu voltage constraint violated: %d %d\n", + core_uV, cpu_uV + 120000); + + rtc_uV = regulator_get_voltage_rdev(rtc_rdev); + if (rtc_uV < 0) + return rtc_uV; + + if (cpu_uV + 120000 > rtc_uV) + pr_err("rtc-cpu voltage constraint violated: %d %d\n", + rtc_uV, cpu_uV + 120000); + + if (abs(core_uV - rtc_uV) > 170000) + pr_err("core-rtc voltage constraint violated: %d %d\n", + core_uV, rtc_uV); + + rtc_min_uV = max(cpu_min_uV + 125000, core_min_uV - max_spread); + + err = regulator_check_voltage(rtc_rdev, &rtc_min_uV, &rtc_max_uV); + if (err) + return err; + + while (core_uV != core_min_uV || rtc_uV != rtc_min_uV) { + if (core_uV < core_min_uV) { + core_target_uV = min(core_uV + max_spread, core_min_uV); + core_target_uV = min(rtc_uV + max_spread, core_target_uV); + } else { + core_target_uV = max(core_uV - max_spread, core_min_uV); + core_target_uV = max(rtc_uV - max_spread, core_target_uV); + } + + err = regulator_set_voltage_rdev(core_rdev, + core_target_uV, + core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + core_uV = core_target_uV; + + if (rtc_uV < rtc_min_uV) { + rtc_target_uV = min(rtc_uV + max_spread, rtc_min_uV); + rtc_target_uV = min(core_uV + max_spread, rtc_target_uV); + } else { + rtc_target_uV = max(rtc_uV - max_spread, rtc_min_uV); + rtc_target_uV = max(core_uV - max_spread, rtc_target_uV); + } + + err = regulator_set_voltage_rdev(rtc_rdev, + rtc_target_uV, + rtc_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + rtc_uV = rtc_target_uV; + } + + return 0; +} + +static int tegra20_core_voltage_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *cpu_rdev, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + int cpu_uV; + + cpu_uV = regulator_get_voltage_rdev(cpu_rdev); + if (cpu_uV < 0) + return cpu_uV; + + return tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_uV); +} + +static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *cpu_rdev, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + int cpu_min_uV_consumers = 0; + int cpu_max_uV = INT_MAX; + int cpu_min_uV = 0; + int cpu_uV; + int err; + + err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV); + if (err) + return err; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers, + &cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + + cpu_uV = regulator_get_voltage_rdev(cpu_rdev); + if (cpu_uV < 0) + return cpu_uV; + + /* + * CPU's regulator may not have any consumers, hence the voltage + * must not be changed in that case because CPU simply won't + * survive the voltage drop if it's running on a higher frequency. + */ + if (!cpu_min_uV_consumers) + cpu_min_uV = cpu_uV; + + if (cpu_min_uV > cpu_uV) { + err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_min_uV); + if (err) + return err; + + err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV, + cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + } else if (cpu_min_uV < cpu_uV) { + err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV, + cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + + err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_min_uV); + if (err) + return err; + } + + return 0; +} + +static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler, + struct regulator_dev *rdev, + suspend_state_t state) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct regulator_dev *core_rdev = tegra->core_rdev; + struct regulator_dev *cpu_rdev = tegra->cpu_rdev; + struct regulator_dev *rtc_rdev = tegra->rtc_rdev; + + if ((core_rdev != rdev && cpu_rdev != rdev && rtc_rdev != rdev) || + state != PM_SUSPEND_ON) { + pr_err("regulators are not coupled properly\n"); + return -EINVAL; + } + + if (rdev == cpu_rdev) + return tegra20_cpu_voltage_update(tegra, cpu_rdev, + core_rdev, rtc_rdev); + + if (rdev == core_rdev) + return tegra20_core_voltage_update(tegra, cpu_rdev, + core_rdev, rtc_rdev); + + pr_err("changing %s voltage not permitted\n", rdev_get_name(rtc_rdev)); + + return -EPERM; +} + +static int tegra20_regulator_attach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct device_node *np = rdev->dev.of_node; + + if (of_property_read_bool(np, "nvidia,tegra-core-regulator") && + !tegra->core_rdev) { + tegra->core_rdev = rdev; + return 0; + } + + if (of_property_read_bool(np, "nvidia,tegra-rtc-regulator") && + !tegra->rtc_rdev) { + tegra->rtc_rdev = rdev; + return 0; + } + + if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") && + !tegra->cpu_rdev) { + tegra->cpu_rdev = rdev; + return 0; + } + + return -EINVAL; +} + +static int tegra20_regulator_detach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + + if (tegra->core_rdev == rdev) { + tegra->core_rdev = NULL; + return 0; + } + + if (tegra->rtc_rdev == rdev) { + tegra->rtc_rdev = NULL; + return 0; + } + + if (tegra->cpu_rdev == rdev) { + tegra->cpu_rdev = NULL; + return 0; + } + + return -EINVAL; +} + +static struct tegra_regulator_coupler tegra20_coupler = { + .coupler = { + .attach_regulator = tegra20_regulator_attach, + .detach_regulator = tegra20_regulator_detach, + .balance_voltage = tegra20_regulator_balance_voltage, + }, +}; + +static int __init tegra_regulator_coupler_init(void) +{ + if (!of_machine_is_compatible("nvidia,tegra20")) + return 0; + + return regulator_coupler_register(&tegra20_coupler.coupler); +} +arch_initcall(tegra_regulator_coupler_init); diff --git a/drivers/soc/tegra/regulators-tegra30.c b/drivers/soc/tegra/regulators-tegra30.c new file mode 100644 index 000000000000..8e623ff18e70 --- /dev/null +++ b/drivers/soc/tegra/regulators-tegra30.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Voltage regulators coupler for NVIDIA Tegra30 + * Copyright (C) 2019 GRATE-DRIVER project + * + * Voltage constraints borrowed from downstream kernel sources + * Copyright (C) 2010-2011 NVIDIA Corporation + */ + +#define pr_fmt(fmt) "tegra voltage-coupler: " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/regulator/coupler.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#include <soc/tegra/fuse.h> + +struct tegra_regulator_coupler { + struct regulator_coupler coupler; + struct regulator_dev *core_rdev; + struct regulator_dev *cpu_rdev; + int core_min_uV; +}; + +static inline struct tegra_regulator_coupler * +to_tegra_coupler(struct regulator_coupler *coupler) +{ + return container_of(coupler, struct tegra_regulator_coupler, coupler); +} + +static int tegra30_core_limit(struct tegra_regulator_coupler *tegra, + struct regulator_dev *core_rdev) +{ + int core_min_uV = 0; + int core_max_uV; + int core_cur_uV; + int err; + + if (tegra->core_min_uV > 0) + return tegra->core_min_uV; + + core_cur_uV = regulator_get_voltage_rdev(core_rdev); + if (core_cur_uV < 0) + return core_cur_uV; + + core_max_uV = max(core_cur_uV, 1200000); + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + /* + * Limit minimum CORE voltage to a value left from bootloader or, + * if it's unreasonably low value, to the most common 1.2v or to + * whatever maximum value defined via board's device-tree. + */ + tegra->core_min_uV = core_max_uV; + + pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV); + + return tegra->core_min_uV; +} + +static int tegra30_core_cpu_limit(int cpu_uV) +{ + if (cpu_uV < 800000) + return 950000; + + if (cpu_uV < 900000) + return 1000000; + + if (cpu_uV < 1000000) + return 1100000; + + if (cpu_uV < 1100000) + return 1200000; + + if (cpu_uV < 1250000) { + switch (tegra_sku_info.cpu_speedo_id) { + case 0 ... 1: + case 4: + case 7 ... 8: + return 1200000; + + default: + return 1300000; + } + } + + return -EINVAL; +} + +static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *cpu_rdev, + struct regulator_dev *core_rdev) +{ + int core_min_uV, core_max_uV = INT_MAX; + int cpu_min_uV, cpu_max_uV = INT_MAX; + int cpu_min_uV_consumers = 0; + int core_min_limited_uV; + int core_target_uV; + int cpu_target_uV; + int core_max_step; + int cpu_max_step; + int max_spread; + int core_uV; + int cpu_uV; + int err; + + /* + * CPU voltage should not got lower than 300mV from the CORE. + * CPU voltage should stay below the CORE by 100mV+, depending + * by the CORE voltage. This applies to all Tegra30 SoC's. + */ + max_spread = cpu_rdev->constraints->max_spread[0]; + cpu_max_step = cpu_rdev->constraints->max_uV_step; + core_max_step = core_rdev->constraints->max_uV_step; + + if (!max_spread) { + pr_err_once("cpu-core max-spread is undefined in device-tree\n"); + max_spread = 300000; + } + + if (!cpu_max_step) { + pr_err_once("cpu max-step is undefined in device-tree\n"); + cpu_max_step = 150000; + } + + if (!core_max_step) { + pr_err_once("core max-step is undefined in device-tree\n"); + core_max_step = 150000; + } + + /* + * The CORE voltage scaling is currently not hooked up in drivers, + * hence we will limit the minimum CORE voltage to a reasonable value. + * This should be good enough for the time being. + */ + core_min_uV = tegra30_core_limit(tegra, core_rdev); + if (core_min_uV < 0) + return core_min_uV; + + err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + core_uV = regulator_get_voltage_rdev(core_rdev); + if (core_uV < 0) + return core_uV; + + cpu_min_uV = core_min_uV - max_spread; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers, + &cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + + err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV); + if (err) + return err; + + cpu_uV = regulator_get_voltage_rdev(cpu_rdev); + if (cpu_uV < 0) + return cpu_uV; + + /* + * CPU's regulator may not have any consumers, hence the voltage + * must not be changed in that case because CPU simply won't + * survive the voltage drop if it's running on a higher frequency. + */ + if (!cpu_min_uV_consumers) + cpu_min_uV = cpu_uV; + + /* + * Bootloader shall set up voltages correctly, but if it + * happens that there is a violation, then try to fix it + * at first. + */ + core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV); + if (core_min_limited_uV < 0) + return core_min_limited_uV; + + core_min_uV = max(core_min_uV, tegra30_core_cpu_limit(cpu_min_uV)); + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + if (core_min_limited_uV > core_uV) { + pr_err("core voltage constraint violated: %d %d %d\n", + core_uV, core_min_limited_uV, cpu_uV); + goto update_core; + } + + while (cpu_uV != cpu_min_uV || core_uV != core_min_uV) { + if (cpu_uV < cpu_min_uV) { + cpu_target_uV = min(cpu_uV + cpu_max_step, cpu_min_uV); + } else { + cpu_target_uV = max(cpu_uV - cpu_max_step, cpu_min_uV); + cpu_target_uV = max(core_uV - max_spread, cpu_target_uV); + } + + err = regulator_set_voltage_rdev(cpu_rdev, + cpu_target_uV, + cpu_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + cpu_uV = cpu_target_uV; +update_core: + core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV); + if (core_min_limited_uV < 0) + return core_min_limited_uV; + + core_target_uV = max(core_min_limited_uV, core_min_uV); + + if (core_uV < core_target_uV) { + core_target_uV = min(core_target_uV, core_uV + core_max_step); + core_target_uV = min(core_target_uV, cpu_uV + max_spread); + } else { + core_target_uV = max(core_target_uV, core_uV - core_max_step); + } + + err = regulator_set_voltage_rdev(core_rdev, + core_target_uV, + core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + core_uV = core_target_uV; + } + + return 0; +} + +static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler, + struct regulator_dev *rdev, + suspend_state_t state) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct regulator_dev *core_rdev = tegra->core_rdev; + struct regulator_dev *cpu_rdev = tegra->cpu_rdev; + + if ((core_rdev != rdev && cpu_rdev != rdev) || state != PM_SUSPEND_ON) { + pr_err("regulators are not coupled properly\n"); + return -EINVAL; + } + + return tegra30_voltage_update(tegra, cpu_rdev, core_rdev); +} + +static int tegra30_regulator_attach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct device_node *np = rdev->dev.of_node; + + if (of_property_read_bool(np, "nvidia,tegra-core-regulator") && + !tegra->core_rdev) { + tegra->core_rdev = rdev; + return 0; + } + + if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") && + !tegra->cpu_rdev) { + tegra->cpu_rdev = rdev; + return 0; + } + + return -EINVAL; +} + +static int tegra30_regulator_detach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + + if (tegra->core_rdev == rdev) { + tegra->core_rdev = NULL; + return 0; + } + + if (tegra->cpu_rdev == rdev) { + tegra->cpu_rdev = NULL; + return 0; + } + + return -EINVAL; +} + +static struct tegra_regulator_coupler tegra30_coupler = { + .coupler = { + .attach_regulator = tegra30_regulator_attach, + .detach_regulator = tegra30_regulator_detach, + .balance_voltage = tegra30_regulator_balance_voltage, + }, +}; + +static int __init tegra_regulator_coupler_init(void) +{ + if (!of_machine_is_compatible("nvidia,tegra30")) + return 0; + + return regulator_coupler_register(&tegra30_coupler.coupler); +} +arch_initcall(tegra_regulator_coupler_init); diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile index b3868d392d4f..788b5cd1e180 100644 --- a/drivers/soc/ti/Makefile +++ b/drivers/soc/ti/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss.o knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o obj-$(CONFIG_AMX3_PM) += pm33xx.o +obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_prm.o obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c new file mode 100644 index 000000000000..96c6f777519c --- /dev/null +++ b/drivers/soc/ti/omap_prm.c @@ -0,0 +1,391 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OMAP2+ PRM driver + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Tero Kristo <t-kristo@ti.com> + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/delay.h> + +#include <linux/platform_data/ti-prm.h> + +struct omap_rst_map { + s8 rst; + s8 st; +}; + +struct omap_prm_data { + u32 base; + const char *name; + const char *clkdm_name; + u16 rstctrl; + u16 rstst; + const struct omap_rst_map *rstmap; + u8 flags; +}; + +struct omap_prm { + const struct omap_prm_data *data; + void __iomem *base; +}; + +struct omap_reset_data { + struct reset_controller_dev rcdev; + struct omap_prm *prm; + u32 mask; + spinlock_t lock; + struct clockdomain *clkdm; + struct device *dev; +}; + +#define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev) + +#define OMAP_MAX_RESETS 8 +#define OMAP_RESET_MAX_WAIT 10000 + +#define OMAP_PRM_HAS_RSTCTRL BIT(0) +#define OMAP_PRM_HAS_RSTST BIT(1) +#define OMAP_PRM_HAS_NO_CLKDM BIT(2) + +#define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST) + +static const struct omap_rst_map rst_map_0[] = { + { .rst = 0, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map rst_map_01[] = { + { .rst = 0, .st = 0 }, + { .rst = 1, .st = 1 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map rst_map_012[] = { + { .rst = 0, .st = 0 }, + { .rst = 1, .st = 1 }, + { .rst = 2, .st = 2 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data omap4_prm_data[] = { + { .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 }, + { .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct omap_prm_data omap5_prm_data[] = { + { .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 }, + { .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct omap_prm_data dra7_prm_data[] = { + { .name = "dsp1", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "ipu", .base = 0x4ae06500, .rstctrl = 0x10, .rstst = 0x14, .clkdm_name = "ipu1", .rstmap = rst_map_012 }, + { .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu2", .rstmap = rst_map_012 }, + { .name = "iva", .base = 0x4ae06f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "dsp2", .base = 0x4ae07b00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve1", .base = 0x4ae07b40, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve2", .base = 0x4ae07b80, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve3", .base = 0x4ae07bc0, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve4", .base = 0x4ae07c00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { }, +}; + +static const struct omap_rst_map am3_per_rst_map[] = { + { .rst = 1 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map am3_wkup_rst_map[] = { + { .rst = 3, .st = 5 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data am3_prm_data[] = { + { .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" }, + { .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { }, +}; + +static const struct omap_rst_map am4_per_rst_map[] = { + { .rst = 1, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map am4_device_rst_map[] = { + { .rst = 0, .st = 1 }, + { .rst = 1, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data am4_prm_data[] = { + { .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" }, + { .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM }, + { .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct of_device_id omap_prm_id_table[] = { + { .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data }, + { .compatible = "ti,omap5-prm-inst", .data = omap5_prm_data }, + { .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data }, + { .compatible = "ti,am3-prm-inst", .data = am3_prm_data }, + { .compatible = "ti,am4-prm-inst", .data = am4_prm_data }, + { }, +}; + +static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id) +{ + if (reset->mask & BIT(id)) + return true; + + return false; +} + +static int omap_reset_get_st_bit(struct omap_reset_data *reset, + unsigned long id) +{ + const struct omap_rst_map *map = reset->prm->data->rstmap; + + while (map->rst >= 0) { + if (map->rst == id) + return map->st; + + map++; + } + + return id; +} + +static int omap_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + int st_bit = omap_reset_get_st_bit(reset, id); + bool has_rstst = reset->prm->data->rstst || + (reset->prm->data->flags & OMAP_PRM_HAS_RSTST); + + /* Check if we have rstst */ + if (!has_rstst) + return -ENOTSUPP; + + /* Check if hw reset line is asserted */ + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + if (v & BIT(id)) + return 1; + + /* + * Check reset status, high value means reset sequence has been + * completed successfully so we can return 0 here (reset deasserted) + */ + v = readl_relaxed(reset->prm->base + reset->prm->data->rstst); + v >>= st_bit; + v &= 1; + + return !v; +} + +static int omap_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + unsigned long flags; + + /* assert the reset control line */ + spin_lock_irqsave(&reset->lock, flags); + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + v |= 1 << id; + writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl); + spin_unlock_irqrestore(&reset->lock, flags); + + return 0; +} + +static int omap_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + int st_bit; + bool has_rstst; + unsigned long flags; + struct ti_prm_platform_data *pdata = dev_get_platdata(reset->dev); + int ret = 0; + + has_rstst = reset->prm->data->rstst || + (reset->prm->data->flags & OMAP_PRM_HAS_RSTST); + + if (has_rstst) { + st_bit = omap_reset_get_st_bit(reset, id); + + /* Clear the reset status by writing 1 to the status bit */ + v = 1 << st_bit; + writel_relaxed(v, reset->prm->base + reset->prm->data->rstst); + } + + if (reset->clkdm) + pdata->clkdm_deny_idle(reset->clkdm); + + /* de-assert the reset control line */ + spin_lock_irqsave(&reset->lock, flags); + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + v &= ~(1 << id); + writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl); + spin_unlock_irqrestore(&reset->lock, flags); + + if (!has_rstst) + goto exit; + + /* wait for the status to be set */ + ret = readl_relaxed_poll_timeout(reset->prm->base + + reset->prm->data->rstst, + v, v & BIT(st_bit), 1, + OMAP_RESET_MAX_WAIT); + if (ret) + pr_err("%s: timedout waiting for %s:%lu\n", __func__, + reset->prm->data->name, id); + +exit: + if (reset->clkdm) + pdata->clkdm_allow_idle(reset->clkdm); + + return ret; +} + +static const struct reset_control_ops omap_reset_ops = { + .assert = omap_reset_assert, + .deassert = omap_reset_deassert, + .status = omap_reset_status, +}; + +static int omap_prm_reset_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + + if (!_is_valid_reset(reset, reset_spec->args[0])) + return -EINVAL; + + return reset_spec->args[0]; +} + +static int omap_prm_reset_init(struct platform_device *pdev, + struct omap_prm *prm) +{ + struct omap_reset_data *reset; + const struct omap_rst_map *map; + struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev); + char buf[32]; + + /* + * Check if we have controllable resets. If either rstctrl is non-zero + * or OMAP_PRM_HAS_RSTCTRL flag is set, we have reset control register + * for the domain. + */ + if (!prm->data->rstctrl && !(prm->data->flags & OMAP_PRM_HAS_RSTCTRL)) + return 0; + + /* Check if we have the pdata callbacks in place */ + if (!pdata || !pdata->clkdm_lookup || !pdata->clkdm_deny_idle || + !pdata->clkdm_allow_idle) + return -EINVAL; + + map = prm->data->rstmap; + if (!map) + return -EINVAL; + + reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL); + if (!reset) + return -ENOMEM; + + reset->rcdev.owner = THIS_MODULE; + reset->rcdev.ops = &omap_reset_ops; + reset->rcdev.of_node = pdev->dev.of_node; + reset->rcdev.nr_resets = OMAP_MAX_RESETS; + reset->rcdev.of_xlate = omap_prm_reset_xlate; + reset->rcdev.of_reset_n_cells = 1; + reset->dev = &pdev->dev; + spin_lock_init(&reset->lock); + + reset->prm = prm; + + sprintf(buf, "%s_clkdm", prm->data->clkdm_name ? prm->data->clkdm_name : + prm->data->name); + + if (!(prm->data->flags & OMAP_PRM_HAS_NO_CLKDM)) { + reset->clkdm = pdata->clkdm_lookup(buf); + if (!reset->clkdm) + return -EINVAL; + } + + while (map->rst >= 0) { + reset->mask |= BIT(map->rst); + map++; + } + + return devm_reset_controller_register(&pdev->dev, &reset->rcdev); +} + +static int omap_prm_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct omap_prm_data *data; + struct omap_prm *prm; + const struct of_device_id *match; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + match = of_match_device(omap_prm_id_table, &pdev->dev); + if (!match) + return -ENOTSUPP; + + prm = devm_kzalloc(&pdev->dev, sizeof(*prm), GFP_KERNEL); + if (!prm) + return -ENOMEM; + + data = match->data; + + while (data->base != res->start) { + if (!data->base) + return -EINVAL; + data++; + } + + prm->data = data; + + prm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(prm->base)) + return PTR_ERR(prm->base); + + return omap_prm_reset_init(pdev, prm); +} + +static struct platform_driver omap_prm_driver = { + .probe = omap_prm_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = omap_prm_id_table, + }, +}; +builtin_platform_driver(omap_prm_driver); diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c index 600f57cf0c2e..23d90cb12ba9 100644 --- a/drivers/soc/xilinx/zynqmp_pm_domains.c +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c @@ -2,7 +2,7 @@ /* * ZynqMP Generic PM domain support * - * Copyright (C) 2015-2018 Xilinx, Inc. + * Copyright (C) 2015-2019 Xilinx, Inc. * * Davorin Mista <davorin.mista@aggios.com> * Jolly Shah <jollys@xilinx.com> @@ -25,6 +25,8 @@ static const struct zynqmp_eemi_ops *eemi_ops; +static int min_capability; + /** * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain * @gpd: Generic power domain @@ -106,7 +108,7 @@ static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) int ret; struct pm_domain_data *pdd, *tmp; struct zynqmp_pm_domain *pd; - u32 capabilities = 0; + u32 capabilities = min_capability; bool may_wakeup; if (!eemi_ops->set_requirement) @@ -283,6 +285,10 @@ static int zynqmp_gpd_probe(struct platform_device *pdev) if (!domains) return -ENOMEM; + if (!of_device_is_compatible(dev->parent->of_node, + "xlnx,zynqmp-firmware")) + min_capability = ZYNQMP_PM_CAPABILITY_UNUSABLE; + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) { pd->node_id = 0; pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i); diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h index 93e36d011527..f05f8b1808ec 100644 --- a/include/dt-bindings/power/qcom-rpmpd.h +++ b/include/dt-bindings/power/qcom-rpmpd.h @@ -27,6 +27,14 @@ #define RPMH_REGULATOR_LEVEL_TURBO 384 #define RPMH_REGULATOR_LEVEL_TURBO_L1 416 +/* MSM8976 Power Domain Indexes */ +#define MSM8976_VDDCX 0 +#define MSM8976_VDDCX_AO 1 +#define MSM8976_VDDCX_VFL 2 +#define MSM8976_VDDMX 3 +#define MSM8976_VDDMX_AO 4 +#define MSM8976_VDDMX_VFL 5 + /* MSM8996 Power Domain Indexes */ #define MSM8996_VDDCX 0 #define MSM8996_VDDCX_AO 1 @@ -68,6 +76,7 @@ #define RPM_SMD_LEVEL_NOM_PLUS 320 #define RPM_SMD_LEVEL_TURBO 384 #define RPM_SMD_LEVEL_TURBO_NO_CPR 416 +#define RPM_SMD_LEVEL_TURBO_HIGH 448 #define RPM_SMD_LEVEL_BINNING 512 #endif diff --git a/include/dt-bindings/reset/amlogic,meson-a1-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-reset.h new file mode 100644 index 000000000000..f1a3a797540d --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-a1-reset.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Xingyu Chen <xingyu.chen@amlogic.com> + * + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_A1_RESET_H + +/* RESET0 */ +/* 0 */ +#define RESET_AM2AXI_VAD 1 +/* 2-3 */ +#define RESET_PSRAM 4 +#define RESET_PAD_CTRL 5 +/* 6 */ +#define RESET_TEMP_SENSOR 7 +#define RESET_AM2AXI_DEV 8 +/* 9 */ +#define RESET_SPICC_A 10 +#define RESET_MSR_CLK 11 +#define RESET_AUDIO 12 +#define RESET_ANALOG_CTRL 13 +#define RESET_SAR_ADC 14 +#define RESET_AUDIO_VAD 15 +#define RESET_CEC 16 +#define RESET_PWM_EF 17 +#define RESET_PWM_CD 18 +#define RESET_PWM_AB 19 +/* 20 */ +#define RESET_IR_CTRL 21 +#define RESET_I2C_S_A 22 +/* 23 */ +#define RESET_I2C_M_D 24 +#define RESET_I2C_M_C 25 +#define RESET_I2C_M_B 26 +#define RESET_I2C_M_A 27 +#define RESET_I2C_PROD_AHB 28 +#define RESET_I2C_PROD 29 +/* 30-31 */ + +/* RESET1 */ +#define RESET_ACODEC 32 +#define RESET_DMA 33 +#define RESET_SD_EMMC_A 34 +/* 35 */ +#define RESET_USBCTRL 36 +/* 37 */ +#define RESET_USBPHY 38 +/* 39-41 */ +#define RESET_RSA 42 +#define RESET_DMC 43 +/* 44 */ +#define RESET_IRQ_CTRL 45 +/* 46 */ +#define RESET_NIC_VAD 47 +#define RESET_NIC_AXI 48 +#define RESET_RAMA 49 +#define RESET_RAMB 50 +/* 51-52 */ +#define RESET_ROM 53 +#define RESET_SPIFC 54 +#define RESET_GIC 55 +#define RESET_UART_C 56 +#define RESET_UART_B 57 +#define RESET_UART_A 58 +#define RESET_OSC_RING 59 +/* 60-63 */ + +/* RESET2 */ +/* 64-95 */ + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h index 05c36367875c..1ef807856cb8 100644 --- a/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h +++ b/include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h @@ -13,5 +13,7 @@ #define AXG_ARB_FRDDR_A 3 #define AXG_ARB_FRDDR_B 4 #define AXG_ARB_FRDDR_C 5 +#define AXG_ARB_TODDR_D 6 +#define AXG_ARB_FRDDR_D 7 #endif /* _DT_BINDINGS_AMLOGIC_MESON_AXG_AUDIO_ARB_H */ diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h index 7613bf7c9442..6669e2a1d5fd 100644 --- a/include/linux/firmware/meson/meson_sm.h +++ b/include/linux/firmware/meson/meson_sm.h @@ -16,11 +16,14 @@ enum { struct meson_sm_firmware; -int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1, - u32 arg2, u32 arg3, u32 arg4); -int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index, - u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4); -int meson_sm_call_read(void *buffer, unsigned int bsize, unsigned int cmd_index, - u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4); +int meson_sm_call(struct meson_sm_firmware *fw, unsigned int cmd_index, + u32 *ret, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4); +int meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer, + unsigned int b_size, unsigned int cmd_index, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4); +int meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer, + unsigned int bsize, unsigned int cmd_index, u32 arg0, + u32 arg1, u32 arg2, u32 arg3, u32 arg4); +struct meson_sm_firmware *meson_sm_get(struct device_node *firmware_node); #endif /* _MESON_SM_FW_H_ */ diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index df366f1a4cb4..e41ad9e37136 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -2,7 +2,7 @@ /* * Xilinx Zynq MPSoC Firmware layer * - * Copyright (C) 2014-2018 Xilinx + * Copyright (C) 2014-2019 Xilinx * * Michal Simek <michal.simek@xilinx.com> * Davorin Mista <davorin.mista@aggios.com> @@ -46,6 +46,7 @@ #define ZYNQMP_PM_CAPABILITY_ACCESS 0x1U #define ZYNQMP_PM_CAPABILITY_CONTEXT 0x2U #define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U +#define ZYNQMP_PM_CAPABILITY_UNUSABLE 0x8U /* * Firmware FPGA Manager flags diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h index 88e1e6304a71..54945aa824b4 100644 --- a/include/linux/logic_pio.h +++ b/include/linux/logic_pio.h @@ -108,10 +108,10 @@ void logic_outsl(unsigned long addr, const void *buffer, unsigned int count); * area by redefining the macro below. */ #define PIO_INDIRECT_SIZE 0x4000 -#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE) #else -#define MMIO_UPPER_LIMIT IO_SPACE_LIMIT +#define PIO_INDIRECT_SIZE 0 #endif /* CONFIG_INDIRECT_PIO */ +#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE) struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode); unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h index f61cd127a852..20c25665216a 100644 --- a/include/linux/mfd/syscon/atmel-matrix.h +++ b/include/linux/mfd/syscon/atmel-matrix.h @@ -106,7 +106,6 @@ #define AT91_MATRIX_DDR_IOSR BIT(18) #define AT91_MATRIX_NFD0_SELECT BIT(24) #define AT91_MATRIX_DDR_MP_EN BIT(25) -#define AT91_MATRIX_EBI_NUM_CS 8 #define AT91_MATRIX_USBPUCR_PUON BIT(30) diff --git a/include/linux/platform_data/ti-prm.h b/include/linux/platform_data/ti-prm.h new file mode 100644 index 000000000000..28154c3226c2 --- /dev/null +++ b/include/linux/platform_data/ti-prm.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TI PRM (Power & Reset Manager) platform data + * + * Copyright (C) 2019 Texas Instruments, Inc. + * + * Tero Kristo <t-kristo@ti.com> + */ + +#ifndef _LINUX_PLATFORM_DATA_TI_PRM_H +#define _LINUX_PLATFORM_DATA_TI_PRM_H + +struct clockdomain; + +struct ti_prm_platform_data { + void (*clkdm_deny_idle)(struct clockdomain *clkdm); + void (*clkdm_allow_idle)(struct clockdomain *clkdm); + struct clockdomain * (*clkdm_lookup)(const char *name); +}; + +#endif /* _LINUX_PLATFORM_DATA_TI_PRM_H */ diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 661efa029c96..aa3da6611533 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -63,6 +63,11 @@ struct wakeup_source { bool autosleep_enabled:1; }; +#define for_each_wakeup_source(ws) \ + for ((ws) = wakeup_sources_walk_start(); \ + (ws); \ + (ws) = wakeup_sources_walk_next((ws))) + #ifdef CONFIG_PM_SLEEP /* @@ -92,6 +97,10 @@ extern void wakeup_source_remove(struct wakeup_source *ws); extern struct wakeup_source *wakeup_source_register(struct device *dev, const char *name); extern void wakeup_source_unregister(struct wakeup_source *ws); +extern int wakeup_sources_read_lock(void); +extern void wakeup_sources_read_unlock(int idx); +extern struct wakeup_source *wakeup_sources_walk_start(void); +extern struct wakeup_source *wakeup_sources_walk_next(struct wakeup_source *ws); extern int device_wakeup_enable(struct device *dev); extern int device_wakeup_disable(struct device *dev); extern void device_set_wakeup_capable(struct device *dev, bool capable); diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index eaae6b4e9f24..ec35814e0bbb 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -62,7 +62,8 @@ struct reset_control_lookup { * @of_node: corresponding device tree node as phandle target * @of_reset_n_cells: number of cells in reset line specifiers * @of_xlate: translation function to translate from specifier as found in the - * device tree to id as given to the reset control ops + * device tree to id as given to the reset control ops, defaults + * to :c:func:`of_reset_simple_xlate`. * @nr_resets: number of reset controls in this reset controller device */ struct reset_controller_dev { diff --git a/include/linux/reset.h b/include/linux/reset.h index eb597e8aa430..05aa9f440f48 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -203,12 +203,34 @@ static inline struct reset_control *reset_control_get_shared( return __reset_control_get(dev, id, 0, true, false, false); } +/** + * reset_control_get_optional_exclusive - optional reset_control_get_exclusive() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Optional variant of reset_control_get_exclusive(). If the requested reset + * is not specified in the device tree, this function returns NULL instead of + * an error. + * + * See reset_control_get_exclusive() for more information. + */ static inline struct reset_control *reset_control_get_optional_exclusive( struct device *dev, const char *id) { return __reset_control_get(dev, id, 0, false, true, true); } +/** + * reset_control_get_optional_shared - optional reset_control_get_shared() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Optional variant of reset_control_get_shared(). If the requested reset + * is not specified in the device tree, this function returns NULL instead of + * an error. + * + * See reset_control_get_shared() for more information. + */ static inline struct reset_control *reset_control_get_optional_shared( struct device *dev, const char *id) { @@ -354,12 +376,36 @@ static inline struct reset_control *devm_reset_control_get_shared( return __devm_reset_control_get(dev, id, 0, true, false, false); } +/** + * devm_reset_control_get_optional_exclusive - resource managed + * reset_control_get_optional_exclusive() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get_optional_exclusive(). For reset controllers + * returned from this function, reset_control_put() is called automatically on + * driver detach. + * + * See reset_control_get_optional_exclusive() for more information. + */ static inline struct reset_control *devm_reset_control_get_optional_exclusive( struct device *dev, const char *id) { return __devm_reset_control_get(dev, id, 0, false, true, true); } +/** + * devm_reset_control_get_optional_shared - resource managed + * reset_control_get_optional_shared() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get_optional_shared(). For reset controllers returned + * from this function, reset_control_put() is called automatically on driver + * detach. + * + * See reset_control_get_optional_shared() for more information. + */ static inline struct reset_control *devm_reset_control_get_optional_shared( struct device *dev, const char *id) { diff --git a/include/linux/soc/mmp/cputype.h b/include/linux/soc/mmp/cputype.h index c3ec88983e94..221790761e8e 100644 --- a/include/linux/soc/mmp/cputype.h +++ b/include/linux/soc/mmp/cputype.h @@ -2,7 +2,9 @@ #ifndef __ASM_MACH_CPUTYPE_H #define __ASM_MACH_CPUTYPE_H +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) #include <asm/cputype.h> +#endif /* * CPU Stepping CPU_ID CHIP_ID diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index eb71a50b8afc..90b864655822 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -38,33 +38,27 @@ struct llcc_slice_desc { }; /** - * llcc_slice_config - Data associated with the llcc slice - * @usecase_id: usecase id for which the llcc slice is used - * @slice_id: llcc slice id assigned to each slice - * @max_cap: maximum capacity of the llcc slice - * @priority: priority of the llcc slice - * @fixed_size: whether the llcc slice can grow beyond its size - * @bonus_ways: bonus ways associated with llcc slice - * @res_ways: reserved ways associated with llcc slice - * @cache_mode: mode of the llcc slice - * @probe_target_ways: Probe only reserved and bonus ways on a cache miss - * @dis_cap_alloc: Disable capacity based allocation - * @retain_on_pc: Retain through power collapse - * @activate_on_init: activate the slice on init + * llcc_edac_reg_data - llcc edac registers data for each error type + * @name: Name of the error + * @synd_reg: Syndrome register address + * @count_status_reg: Status register address to read the error count + * @ways_status_reg: Status register address to read the error ways + * @reg_cnt: Number of registers + * @count_mask: Mask value to get the error count + * @ways_mask: Mask value to get the error ways + * @count_shift: Shift value to get the error count + * @ways_shift: Shift value to get the error ways */ -struct llcc_slice_config { - u32 usecase_id; - u32 slice_id; - u32 max_cap; - u32 priority; - bool fixed_size; - u32 bonus_ways; - u32 res_ways; - u32 cache_mode; - u32 probe_target_ways; - bool dis_cap_alloc; - bool retain_on_pc; - bool activate_on_init; +struct llcc_edac_reg_data { + char *name; + u64 synd_reg; + u64 count_status_reg; + u64 ways_status_reg; + u32 reg_cnt; + u32 count_mask; + u32 ways_mask; + u8 count_shift; + u8 ways_shift; }; /** @@ -93,30 +87,6 @@ struct llcc_drv_data { int ecc_irq; }; -/** - * llcc_edac_reg_data - llcc edac registers data for each error type - * @name: Name of the error - * @synd_reg: Syndrome register address - * @count_status_reg: Status register address to read the error count - * @ways_status_reg: Status register address to read the error ways - * @reg_cnt: Number of registers - * @count_mask: Mask value to get the error count - * @ways_mask: Mask value to get the error ways - * @count_shift: Shift value to get the error count - * @ways_shift: Shift value to get the error ways - */ -struct llcc_edac_reg_data { - char *name; - u64 synd_reg; - u64 count_status_reg; - u64 ways_status_reg; - u32 reg_cnt; - u32 count_mask; - u32 ways_mask; - u8 count_shift; - u8 ways_shift; -}; - #if IS_ENABLED(CONFIG_QCOM_LLCC) /** * llcc_slice_getd - get llcc slice descriptor @@ -154,20 +124,6 @@ int llcc_slice_activate(struct llcc_slice_desc *desc); */ int llcc_slice_deactivate(struct llcc_slice_desc *desc); -/** - * qcom_llcc_probe - program the sct table - * @pdev: platform device pointer - * @table: soc sct table - * @sz: Size of the config table - */ -int qcom_llcc_probe(struct platform_device *pdev, - const struct llcc_slice_config *table, u32 sz); - -/** - * qcom_llcc_remove - remove the sct table - * @pdev: Platform device pointer - */ -int qcom_llcc_remove(struct platform_device *pdev); #else static inline struct llcc_slice_desc *llcc_slice_getd(u32 uid) { @@ -197,16 +153,6 @@ static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc) { return -EINVAL; } -static inline int qcom_llcc_probe(struct platform_device *pdev, - const struct llcc_slice_config *table, u32 sz) -{ - return -ENODEV; -} - -static inline int qcom_llcc_remove(struct platform_device *pdev) -{ - return -ENODEV; -} #endif #endif diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index 16e2c2fb5f6c..1238e35653d1 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -181,7 +181,7 @@ struct tegra_mc { spinlock_t lock; }; -void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate); +int tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate); unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc); #endif /* __SOC_TEGRA_MC_H__ */ diff --git a/lib/Makefile b/lib/Makefile index c2f0e2a4e4e8..93217d44237f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -109,7 +109,7 @@ obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o -obj-y += logic_pio.o +lib-y += logic_pio.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o diff --git a/lib/logic_pio.c b/lib/logic_pio.c index 905027574e5d..f511a99bb389 100644 --- a/lib/logic_pio.c +++ b/lib/logic_pio.c @@ -3,6 +3,7 @@ * Copyright (C) 2017 HiSilicon Limited, All Rights Reserved. * Author: Gabriele Paoloni <gabriele.paoloni@huawei.com> * Author: Zhichang Yuan <yuanzhichang@hisilicon.com> + * Author: John Garry <john.garry@huawei.com> */ #define pr_fmt(fmt) "LOGIC PIO: " fmt @@ -39,7 +40,8 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range) resource_size_t iio_sz = MMIO_UPPER_LIMIT; int ret = 0; - if (!new_range || !new_range->fwnode || !new_range->size) + if (!new_range || !new_range->fwnode || !new_range->size || + (new_range->flags == LOGIC_PIO_INDIRECT && !new_range->ops)) return -EINVAL; start = new_range->hw_start; @@ -237,7 +239,7 @@ type logic_in##bw(unsigned long addr) \ } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \ struct logic_pio_hwaddr *entry = find_io_range(addr); \ \ - if (entry && entry->ops) \ + if (entry) \ ret = entry->ops->in(entry->hostdata, \ addr, sizeof(type)); \ else \ @@ -253,7 +255,7 @@ void logic_out##bw(type value, unsigned long addr) \ } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \ struct logic_pio_hwaddr *entry = find_io_range(addr); \ \ - if (entry && entry->ops) \ + if (entry) \ entry->ops->out(entry->hostdata, \ addr, value, sizeof(type)); \ else \ @@ -261,7 +263,7 @@ void logic_out##bw(type value, unsigned long addr) \ } \ } \ \ -void logic_ins##bw(unsigned long addr, void *buffer, \ +void logic_ins##bw(unsigned long addr, void *buffer, \ unsigned int count) \ { \ if (addr < MMIO_UPPER_LIMIT) { \ @@ -269,7 +271,7 @@ void logic_ins##bw(unsigned long addr, void *buffer, \ } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \ struct logic_pio_hwaddr *entry = find_io_range(addr); \ \ - if (entry && entry->ops) \ + if (entry) \ entry->ops->ins(entry->hostdata, \ addr, buffer, sizeof(type), count); \ else \ @@ -286,7 +288,7 @@ void logic_outs##bw(unsigned long addr, const void *buffer, \ } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \ struct logic_pio_hwaddr *entry = find_io_range(addr); \ \ - if (entry && entry->ops) \ + if (entry) \ entry->ops->outs(entry->hostdata, \ addr, buffer, sizeof(type), count); \ else \ |