diff options
26 files changed, 342 insertions, 112 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index b4ca9552d6fb..050d0e77a2cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2931,10 +2931,9 @@ S: Maintained F: drivers/platform/x86/compal-laptop.c CONEXANT ACCESSRUNNER USB DRIVER -M: Simon Arlott <cxacru@fire.lp0.eu> L: accessrunner-general@lists.sourceforge.net W: http://accessrunner.sourceforge.net/ -S: Maintained +S: Orphan F: drivers/usb/atm/cxacru.c CONFIGFS diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index feb9d34b239c..f818ea483aeb 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -486,7 +486,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -495,7 +498,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; dr_mode = "host"; status = "disabled"; @@ -505,7 +511,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; status = "disabled"; @@ -515,7 +524,6 @@ #index-cells = <1>; compatible = "fsl,imx27-usbmisc"; reg = <0x10024600 0x200>; - clocks = <&clks IMX27_CLK_USB_AHB_GATE>; }; sahara2: sahara@10025000 { diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 6ccbf60cdd5c..5a048b7b92e8 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -84,6 +84,12 @@ struct ci_hdrc_imx_data { struct imx_usbmisc_data *usbmisc_data; bool supports_runtime_pm; bool in_lpm; + /* SoC before i.mx6 (except imx23/imx28) needs three clks */ + bool need_three_clks; + struct clk *clk_ipg; + struct clk *clk_ahb; + struct clk *clk_per; + /* --------------------------------- */ }; /* Common functions shared by usbmisc drivers */ @@ -135,6 +141,102 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) } /* End of common functions shared by usbmisc drivers*/ +static int imx_get_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + data->clk_ipg = devm_clk_get(dev, "ipg"); + if (IS_ERR(data->clk_ipg)) { + /* If the platform only needs one clocks */ + data->clk = devm_clk_get(dev, NULL); + if (IS_ERR(data->clk)) { + ret = PTR_ERR(data->clk); + dev_err(dev, + "Failed to get clks, err=%ld,%ld\n", + PTR_ERR(data->clk), PTR_ERR(data->clk_ipg)); + return ret; + } + return ret; + } + + data->clk_ahb = devm_clk_get(dev, "ahb"); + if (IS_ERR(data->clk_ahb)) { + ret = PTR_ERR(data->clk_ahb); + dev_err(dev, + "Failed to get ahb clock, err=%d\n", ret); + return ret; + } + + data->clk_per = devm_clk_get(dev, "per"); + if (IS_ERR(data->clk_per)) { + ret = PTR_ERR(data->clk_per); + dev_err(dev, + "Failed to get per clock, err=%d\n", ret); + return ret; + } + + data->need_three_clks = true; + return ret; +} + +static int imx_prepare_enable_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + if (data->need_three_clks) { + ret = clk_prepare_enable(data->clk_ipg); + if (ret) { + dev_err(dev, + "Failed to prepare/enable ipg clk, err=%d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(data->clk_ahb); + if (ret) { + dev_err(dev, + "Failed to prepare/enable ahb clk, err=%d\n", + ret); + clk_disable_unprepare(data->clk_ipg); + return ret; + } + + ret = clk_prepare_enable(data->clk_per); + if (ret) { + dev_err(dev, + "Failed to prepare/enable per clk, err=%d\n", + ret); + clk_disable_unprepare(data->clk_ahb); + clk_disable_unprepare(data->clk_ipg); + return ret; + } + } else { + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(dev, + "Failed to prepare/enable clk, err=%d\n", + ret); + return ret; + } + } + + return ret; +} + +static void imx_disable_unprepare_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + + if (data->need_three_clks) { + clk_disable_unprepare(data->clk_per); + clk_disable_unprepare(data->clk_ahb); + clk_disable_unprepare(data->clk_ipg); + } else { + clk_disable_unprepare(data->clk); + } +} static int ci_hdrc_imx_probe(struct platform_device *pdev) { @@ -145,31 +247,31 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) .flags = CI_HDRC_SET_NON_ZERO_TTHA, }; int ret; - const struct of_device_id *of_id = - of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); - const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data; + const struct of_device_id *of_id; + const struct ci_hdrc_imx_platform_flag *imx_platform_flag; + + of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; + + imx_platform_flag = of_id->data; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; + platform_set_drvdata(pdev, data); data->usbmisc_data = usbmisc_get_init_data(&pdev->dev); if (IS_ERR(data->usbmisc_data)) return PTR_ERR(data->usbmisc_data); - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, - "Failed to get clock, err=%ld\n", PTR_ERR(data->clk)); - return PTR_ERR(data->clk); - } + ret = imx_get_clks(&pdev->dev); + if (ret) + return ret; - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, - "Failed to prepare or enable clock, err=%d\n", ret); + ret = imx_prepare_enable_clks(&pdev->dev); + if (ret) return ret; - } data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { @@ -212,8 +314,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) goto disable_device; } - platform_set_drvdata(pdev, data); - if (data->supports_runtime_pm) { pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -226,7 +326,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) disable_device: ci_hdrc_remove_device(data->ci_pdev); err_clk: - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(&pdev->dev); return ret; } @@ -240,7 +340,7 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); } ci_hdrc_remove_device(data->ci_pdev); - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(&pdev->dev); return 0; } @@ -252,7 +352,7 @@ static int imx_controller_suspend(struct device *dev) dev_dbg(dev, "at %s\n", __func__); - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(dev); data->in_lpm = true; return 0; @@ -270,7 +370,7 @@ static int imx_controller_resume(struct device *dev) return 0; } - ret = clk_prepare_enable(data->clk); + ret = imx_prepare_enable_clks(dev); if (ret) return ret; @@ -285,7 +385,7 @@ static int imx_controller_resume(struct device *dev) return 0; clk_disable: - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(dev); return ret; } diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 080b7be3daf0..58c8485a0715 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -322,8 +322,10 @@ static ssize_t ci_role_write(struct file *file, const char __user *ubuf, return -EINVAL; pm_runtime_get_sync(ci->dev); + disable_irq(ci->irq); ci_role_stop(ci); ret = ci_role_start(ci, role); + enable_irq(ci->irq); pm_runtime_put_sync(ci->dev); return ret ? ret : count; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 8223fe73ea85..391a1225b0ba 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1751,6 +1751,22 @@ static int ci_udc_start(struct usb_gadget *gadget, return retval; } +static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci) +{ + if (!ci_otg_is_fsm_mode(ci)) + return; + + mutex_lock(&ci->fsm.lock); + if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) { + ci->fsm.a_bidl_adis_tmout = 1; + ci_hdrc_otg_fsm_start(ci); + } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) { + ci->fsm.protocol = PROTO_UNDEF; + ci->fsm.otg->state = OTG_STATE_UNDEFINED; + } + mutex_unlock(&ci->fsm.lock); +} + /** * ci_udc_stop: unregister a gadget driver */ @@ -1775,6 +1791,7 @@ static int ci_udc_stop(struct usb_gadget *gadget) ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); + ci_udc_stop_for_otg_fsm(ci); return 0; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index fcea4eb36eee..ab8b027e8cc8 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -500,7 +500,11 @@ static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; - struct of_device_id *tmp_dev; + const struct of_device_id *of_id; + + of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -513,9 +517,7 @@ static int usbmisc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - tmp_dev = (struct of_device_id *) - of_match_device(usbmisc_imx_dt_ids, &pdev->dev); - data->ops = (const struct usbmisc_ops *)tmp_dev->data; + data->ops = (const struct usbmisc_ops *)of_id->data; platform_set_drvdata(pdev, data); return 0; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 433bbc34a8a4..071964c7847f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -884,11 +884,11 @@ static int usblp_wwait(struct usblp *usblp, int nonblock) add_wait_queue(&usblp->wwait, &waita); for (;;) { - set_current_state(TASK_INTERRUPTIBLE); if (mutex_lock_interruptible(&usblp->mut)) { rc = -EINTR; break; } + set_current_state(TASK_INTERRUPTIBLE); rc = usblp_wtest(usblp, nonblock); mutex_unlock(&usblp->mut); if (rc <= 0) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index a99c89e78126..dd280108758f 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -77,8 +77,7 @@ config USB_OTG_BLACKLIST_HUB config USB_OTG_FSM tristate "USB 2.0 OTG FSM implementation" - depends on USB - select USB_OTG + depends on USB && USB_OTG select USB_PHY help Implements OTG Finite State Machine as specified in On-The-Go diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index e79baf73c234..571c21727ff9 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -324,12 +324,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) */ static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) { - if (hsotg->lx_state == DWC2_L2) { + if (hsotg->bus_suspended) { hsotg->flags.b.port_suspend_change = 1; usb_hcd_resume_root_hub(hsotg->priv); - } else { - hsotg->flags.b.port_l1_change = 1; } + + if (hsotg->lx_state == DWC2_L1) + hsotg->flags.b.port_l1_change = 1; } /** @@ -1428,8 +1429,8 @@ static void dwc2_wakeup_detected(unsigned long data) dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", dwc2_readl(hsotg->regs + HPRT0)); - hsotg->bus_suspended = 0; dwc2_hcd_rem_wakeup(hsotg); + hsotg->bus_suspended = 0; /* Change to L0 state */ hsotg->lx_state = DWC2_L0; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 5859b0fa19ee..e61d773cf65e 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -108,7 +108,8 @@ static const struct dwc2_core_params params_rk3066 = { .host_ls_low_power_phy_clk = -1, .ts_dline = -1, .reload_ctl = -1, - .ahbcfg = 0x7, /* INCR16 */ + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, .uframe_sched = -1, .external_id_pin_ctl = -1, .hibernation = -1, diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 77a622cb48ab..009d83048c8c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,8 @@ #define PCI_DEVICE_ID_INTEL_BSW 0x22b7 #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 +#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa +#define PCI_DEVICE_ID_INTEL_APL 0x5aaa static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -210,6 +212,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 55ba447fdf8b..e24a01cc98df 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2744,12 +2744,34 @@ int dwc3_gadget_init(struct dwc3 *dwc) } dwc->gadget.ops = &dwc3_gadget_ops; - dwc->gadget.max_speed = USB_SPEED_SUPER; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; /* + * FIXME We might be setting max_speed to <SUPER, however versions + * <2.20a of dwc3 have an issue with metastability (documented + * elsewhere in this driver) which tells us we can't set max speed to + * anything lower than SUPER. + * + * Because gadget.max_speed is only used by composite.c and function + * drivers (i.e. it won't go into dwc3's registers) we are allowing this + * to happen so we avoid sending SuperSpeed Capability descriptor + * together with our BOS descriptor as that could confuse host into + * thinking we can handle super speed. + * + * Note that, in fact, we won't even support GetBOS requests when speed + * is less than super speed because we don't have means, yet, to tell + * composite.c that we are USB 2.0 + LPM ECN. + */ + if (dwc->revision < DWC3_REVISION_220A) + dwc3_trace(trace_dwc3_gadget, + "Changing max_speed on rev %08x\n", + dwc->revision); + + dwc->gadget.max_speed = dwc->maximum_speed; + + /* * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize * on ep out. */ diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c index 23933bdf2d9d..ddc3aad886b7 100644 --- a/drivers/usb/gadget/function/f_loopback.c +++ b/drivers/usb/gadget/function/f_loopback.c @@ -329,7 +329,7 @@ static int alloc_requests(struct usb_composite_dev *cdev, for (i = 0; i < loop->qlen && result == 0; i++) { result = -ENOMEM; - in_req = usb_ep_alloc_request(loop->in_ep, GFP_KERNEL); + in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC); if (!in_req) goto fail; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index f0f2b066ac08..f92f5aff0dd5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1633,7 +1633,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); int_enb = usba_int_enb_get(udc); - status = usba_readl(udc, INT_STA) & int_enb; + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5d2d7e954bd4..0230965fb78c 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -782,12 +782,15 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_SUSPEND; } } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 - && (raw_port_status & PORT_POWER) - && (bus_state->suspended_ports & (1 << wIndex))) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; + if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && + (raw_port_status & PORT_POWER)) { + if (bus_state->suspended_ports & (1 << wIndex)) { + bus_state->suspended_ports &= ~(1 << wIndex); + if (hcd->speed < HCD_USB3) + bus_state->port_c_suspend |= 1 << wIndex; + } + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); } if (raw_port_status & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fa836251ca21..6c5e8133cf87 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3896,28 +3896,6 @@ cleanup: return ret; } -static int ep_ring_is_processing(struct xhci_hcd *xhci, - int slot_id, unsigned int ep_index) -{ - struct xhci_virt_device *xdev; - struct xhci_ring *ep_ring; - struct xhci_ep_ctx *ep_ctx; - struct xhci_virt_ep *xep; - dma_addr_t hw_deq; - - xdev = xhci->devs[slot_id]; - xep = &xhci->devs[slot_id]->eps[ep_index]; - ep_ring = xep->ring; - ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - - if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING) - return 0; - - hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; - return (hw_deq != - xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue)); -} - /* * Check transfer ring to guarantee there is enough room for the urb. * Update ISO URB start_frame and interval. @@ -3983,10 +3961,12 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } /* Calculate the start frame and put it in urb->start_frame. */ - if (HCC_CFC(xhci->hcc_params) && - ep_ring_is_processing(xhci, slot_id, ep_index)) { - urb->start_frame = xep->next_frame_id; - goto skip_start_over; + if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) { + if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == + EP_STATE_RUNNING) { + urb->start_frame = xep->next_frame_id; + goto skip_start_over; + } } start_frame = readl(&xhci->run_regs->microframe_index); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6e7dc6f93978..dfa44d3e8eee 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -175,6 +175,16 @@ int xhci_reset(struct xhci_hcd *xhci) command |= CMD_RESET; writel(command, &xhci->op_regs->command); + /* Existing Intel xHCI controllers require a delay of 1 mS, + * after setting the CMD_RESET bit, and before accessing any + * HC registers. This allows the HC to complete the + * reset operation and be ready for HC register access. + * Without this delay, the subsequent HC register access, + * may result in a system hang very rarely. + */ + if (xhci->quirks & XHCI_INTEL_HOST) + udelay(1000); + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, 10 * 1000 * 1000); if (ret) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ba13529cbd52..18cfc0a361cb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -132,7 +132,7 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ #ifndef CONFIG_BLACKFIN -static int musb_ulpi_read(struct usb_phy *phy, u32 offset) +static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -151,7 +151,7 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. */ - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); @@ -176,7 +176,7 @@ out: return ret; } -static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) +static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -191,8 +191,8 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) power &= ~MUSB_POWER_SUSPENDM; musb_writeb(addr, MUSB_POWER, power); - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); - musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); + musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) @@ -1668,7 +1668,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt); static bool use_dma = 1; /* "modprobe ... use_dma=0" etc */ -module_param(use_dma, bool, 0); +module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 26c65e66cc0f..795a45b1b25b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -112,22 +112,32 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) struct musb *musb = ep->musb; void __iomem *epio = ep->regs; u16 csr; - u16 lastcsr = 0; int retries = 1000; csr = musb_readw(epio, MUSB_TXCSR); while (csr & MUSB_TXCSR_FIFONOTEMPTY) { - if (csr != lastcsr) - dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr); - lastcsr = csr; csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); - if (WARN(retries-- < 1, + + /* + * FIXME: sometimes the tx fifo flush failed, it has been + * observed during device disconnect on AM335x. + * + * To reproduce the issue, ensure tx urb(s) are queued when + * unplug the usb device which is connected to AM335x usb + * host port. + * + * I found using a usb-ethernet device and running iperf + * (client on AM335x) has very high chance to trigger it. + * + * Better to turn on dev_dbg() in musb_cleanup_urb() with + * CPPI enabled to see the issue when aborting the tx channel. + */ + if (dev_WARN_ONCE(musb->controller, retries-- < 1, "Could not flush host TX%d fifo: csr: %04x\n", ep->epnum, csr)) return; - mdelay(1); } } diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 173132416170..22e8ecb6bfbd 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -21,7 +21,6 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM - select USB_OTG select USB_PHY help Enable this to support Freescale USB OTG transceiver. @@ -168,8 +167,7 @@ config USB_QCOM_8X16_PHY config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && PM - select USB_OTG + depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG select USB_PHY help Say Y here if you want to build Marvell USB OTG transciever diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 4d863ebc117c..b7536af777ab 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -452,10 +452,13 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; - const struct of_device_id *of_id = - of_match_device(mxs_phy_dt_ids, &pdev->dev); + const struct of_device_id *of_id; struct device_node *np = pdev->dev.of_node; + of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c index 1270906ccb95..c4bf2de6d14e 100644 --- a/drivers/usb/phy/phy-omap-otg.c +++ b/drivers/usb/phy/phy-omap-otg.c @@ -105,7 +105,6 @@ static int omap_otg_probe(struct platform_device *pdev) extcon = extcon_get_extcon_dev(config->extcon); if (!extcon) return -EPROBE_DEFER; - otg_dev->extcon = extcon; otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL); if (!otg_dev) @@ -115,6 +114,7 @@ static int omap_otg_probe(struct platform_device *pdev) if (IS_ERR(otg_dev->base)) return PTR_ERR(otg_dev->base); + otg_dev->extcon = extcon; otg_dev->id_nb.notifier_call = omap_otg_id_notifier; otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 685fef71d3d1..f2280606b73c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -161,6 +161,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 #define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_E371 0x9011 +#define NOVATELWIRELESS_PRODUCT_U620L 0x9022 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 #define NOVATELWIRELESS_PRODUCT_MC551 0xB001 @@ -354,6 +355,7 @@ static void option_instat_callback(struct urb *urb); /* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +#define FOUR_G_SYSTEMS_PRODUCT_W100 0x9b01 /* iBall 3.5G connect wireless modem */ #define IBALL_3_5G_CONNECT 0x9605 @@ -519,6 +521,11 @@ static const struct option_blacklist_info four_g_w14_blacklist = { .sendsetup = BIT(0) | BIT(1), }; +static const struct option_blacklist_info four_g_w100_blacklist = { + .sendsetup = BIT(1) | BIT(2), + .reserved = BIT(3), +}; + static const struct option_blacklist_info alcatel_x200_blacklist = { .sendsetup = BIT(0) | BIT(1), .reserved = BIT(4), @@ -1052,6 +1059,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U620L, 0xff, 0x00, 0x00) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -1641,6 +1649,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100), + .driver_info = (kernel_ulong_t)&four_g_w100_blacklist + }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 5022fcfa0260..9919d2a9faf2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,6 +22,8 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" +#define QUECTEL_EC20_PID 0x9215 + /* standard device layouts supported by this driver */ enum qcserial_layouts { QCSERIAL_G2K = 0, /* Gobi 2000 */ @@ -171,6 +173,38 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); +static int handle_quectel_ec20(struct device *dev, int ifnum) +{ + int altsetting = 0; + + /* + * Quectel EC20 Mini PCIe LTE module layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 1: NMEA + * 2: AT-capable modem port + * 3: Modem interface + * 4: NDIS + */ + switch (ifnum) { + case 0: + dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n"); + break; + case 1: + dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n"); + break; + case 2: + case 3: + dev_dbg(dev, "Quectel EC20 Modem port found\n"); + break; + case 4: + /* Don't claim the QMI/net interface */ + altsetting = -1; + break; + } + + return altsetting; +} + static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { struct usb_host_interface *intf = serial->interface->cur_altsetting; @@ -181,6 +215,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) int altsetting = -1; bool sendsetup = false; + /* we only support vendor specific functions */ + if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + goto done; + nintf = serial->dev->actconfig->desc.bNumInterfaces; dev_dbg(dev, "Num Interfaces = %d\n", nintf); ifnum = intf->desc.bInterfaceNumber; @@ -240,6 +278,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) altsetting = -1; break; case QCSERIAL_G2K: + /* handle non-standard layouts */ + if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) { + altsetting = handle_quectel_ec20(dev, ifnum); + goto done; + } + /* * Gobi 2K+ USB layout: * 0: QMI/net @@ -301,29 +345,39 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; case QCSERIAL_HWI: /* - * Huawei layout: - * 0: AT-capable modem port - * 1: DM/DIAG - * 2: AT-capable modem port - * 3: CCID-compatible PCSC interface - * 4: QMI/net - * 5: NMEA + * Huawei devices map functions by subclass + protocol + * instead of interface numbers. The protocol identify + * a specific function, while the subclass indicate a + * specific firmware source + * + * This is a blacklist of functions known to be + * non-serial. The rest are assumed to be serial and + * will be handled by this driver */ - switch (ifnum) { - case 0: - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 1: - dev_dbg(dev, "DM/DIAG interface found\n"); - break; - case 5: - dev_dbg(dev, "NMEA GPS interface found\n"); - break; - default: - /* don't claim any unsupported interface */ + switch (intf->desc.bInterfaceProtocol) { + /* QMI combined (qmi_wwan) */ + case 0x07: + case 0x37: + case 0x67: + /* QMI data (qmi_wwan) */ + case 0x08: + case 0x38: + case 0x68: + /* QMI control (qmi_wwan) */ + case 0x09: + case 0x39: + case 0x69: + /* NCM like (huawei_cdc_ncm) */ + case 0x16: + case 0x46: + case 0x76: altsetting = -1; break; + default: + dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n", + intf->desc.bInterfaceClass, + intf->desc.bInterfaceSubClass, + intf->desc.bInterfaceProtocol); } break; default: diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e9da41d9fe7f..2694df2f4559 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -159,6 +159,7 @@ static const struct usb_device_id ti_id_table_3410[] = { { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) }, { } /* terminator */ }; @@ -191,6 +192,7 @@ static const struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) }, { } /* terminator */ }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 4a2423e84d55..98f35c656c02 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -56,6 +56,10 @@ #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID #define ABBOTT_STRIP_PORT_ID 0x3420 +/* Honeywell vendor and product IDs */ +#define HONEYWELL_VENDOR_ID 0x10ac +#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */ + /* Commands */ #define TI_GET_VERSION 0x01 #define TI_GET_PORT_STATUS 0x02 |