diff options
| -rw-r--r-- | arch/arm/configs/bast_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/configs/s3c2410_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-bast.c | 37 | ||||
| -rw-r--r-- | drivers/serial/8250_pci.c | 51 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/bast_sio.c | 80 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 2 |
8 files changed, 70 insertions, 110 deletions
diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig index 2d985e9611cd..35e3a99bcbb6 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/bast_defconfig @@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_BAST_SIO=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 98b72ff38832..96a794d8de84 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -570,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_BAST_SIO=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index ccb6bcefa46c..206778ebfce7 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -28,6 +28,7 @@ * 14-Mar-2006 BJD Updated for __iomem changes * 22-Jun-2006 BJD Added DM9000 platform information * 28-Jun-2006 BJD Moved pm functionality out to common code + * 17-Jul-2006 BJD Changed to platform device for SuperIO 16550s */ #include <linux/kernel.h> @@ -64,6 +65,8 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/serial_8250.h> + #include "clock.h" #include "devs.h" #include "cpu.h" @@ -351,6 +354,39 @@ static struct platform_device bast_device_dm9k = { } }; +/* serial devices */ + +#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) +#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ) +#define SERIAL_CLK (1843200) + +static struct plat_serial8250_port bast_sio_data[] = { + [0] = { + .mapbase = SERIAL_BASE + 0x2f8, + .irq = IRQ_PCSERIAL1, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + [1] = { + .mapbase = SERIAL_BASE + 0x3f8, + .irq = IRQ_PCSERIAL2, + .flags = SERIAL_FLAGS, + .iotype = UPIO_MEM, + .regshift = 0, + .uartclk = SERIAL_CLK, + }, + { } +}; + +static struct platform_device bast_sio = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = &bast_sio_data, + }, +}; /* Standard BAST devices */ @@ -364,6 +400,7 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_nand, &bast_device_nor, &bast_device_dm9k, + &bast_sio, }; static struct clk *bast_clocks[] = { diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index de54bdc5398b..356f5556759a 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pci_dev *dev) * - 10x cards have control registers in IO and/or memory space; * - 20x cards have control registers in standard PCI configuration space. * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * * Note: some SIIG cards are probed by the parport_serial object. */ @@ -1026,6 +1029,8 @@ enum pci_board_num_t { pbn_b0_2_921600, pbn_b0_4_921600, + pbn_b0_4_1152000, + pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, pbn_b0_bt_8_115200, @@ -1158,6 +1163,12 @@ static struct pci_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 8, }, + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, [pbn_b0_bt_1_115200] = { .flags = FL_BASE0|FL_BASE_BARS, @@ -1755,33 +1766,30 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) static void __devexit pciserial_remove_one(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); + struct pci_serial_quirk *quirk; + int i; pci_set_drvdata(dev, NULL); - if (priv) { - struct pci_serial_quirk *quirk; - int i; - - for (i = 0; i < priv->nr; i++) - serial8250_unregister_port(priv->line[i]); + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (priv->remapped_bar[i]) - iounmap(priv->remapped_bar[i]); - priv->remapped_bar[i] = NULL; - } + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } - /* - * Find the exit quirks. - */ - quirk = find_quirk(dev); - if (quirk->exit) - quirk->exit(dev); + /* + * Find the exit quirks. + */ + quirk = find_quirk(dev); + if (quirk->exit) + quirk->exit(dev); - pci_disable_device(dev); + pci_disable_device(dev); - kfree(priv); - } + kfree(priv); } static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) @@ -1978,6 +1986,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, pbn_b0_4_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_115200 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e0d0a470ddfc..97034d3937fd 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -306,13 +306,6 @@ config SERIAL_S3C2410_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_BAST_SIO - bool "Support for BAST SuperIO serial ports" - depends on ARCH_BAST && SERIAL_8250=y - help - Support for registerin the SuperIO chip on BAST board with - the 8250/16550 uart code. - config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && MIPS32 diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 65bd4381685e..11c7dc483f93 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o obj-$(CONFIG_SERIAL_DZ) += dz.o obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o -obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ obj-$(CONFIG_SERIAL_IMX) += imx.o diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c deleted file mode 100644 index 2b48fab6f0c6..000000000000 --- a/drivers/serial/bast_sio.c +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/drivers/serial/bast_sio.c - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 23-Sep-2004 BJD Added copyright header - * 23-Sep-2004 BJD Added serial port remove code -*/ - -#include <linux/module.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/types.h> - -#include <asm/io.h> -#include <asm/serial.h> -#include <asm/mach-types.h> - -#include <asm/arch/map.h> -#include <asm/arch/irqs.h> -#include <asm/arch/bast-map.h> -#include <asm/arch/bast-irq.h> - -static int __init serial_bast_register(unsigned long port, unsigned int irq) -{ - struct serial_struct serial_req; - - serial_req.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ; - serial_req.baud_base = BASE_BAUD; - serial_req.irq = irq; - serial_req.io_type = UPIO_MEM; - serial_req.iomap_base = port; - serial_req.iomem_base = ioremap(port, 0x10); - serial_req.iomem_reg_shift = 0; - - return register_serial(&serial_req); -} - -#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) - -static int port[2] = { -1, -1 }; - -static int __init serial_bast_init(void) -{ - if (machine_is_bast()) { - port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1); - port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2); - } - - return 0; -} - -static void __exit serial_bast_exit(void) -{ - if (port[0] != -1) - unregister_serial(port[0]); - if (port[1] != -1) - unregister_serial(port[1]); -} - - -module_init(serial_bast_init); -module_exit(serial_bast_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk"); -MODULE_DESCRIPTION("BAST Onboard Serial setup"); - - diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 27348c22dacb..9a28b312eeb4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1872,6 +1872,7 @@ #define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 #define PCI_VENDOR_ID_SIIG 0x131f +#define PCI_SUBVENDOR_ID_SIIG 0x131f #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 #define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001 #define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002 @@ -1909,6 +1910,7 @@ #define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 #define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 #define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 +#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 #define PCI_VENDOR_ID_RADISYS 0x1331 #define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030 |