diff options
31 files changed, 2222 insertions, 422 deletions
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 1f0f67234a91..3c67bd50aa10 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -1,7 +1,10 @@ * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs Required properties: -- compatible : "fsl,imx6q-thermal" +- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX. + i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, + when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature + is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index d0f3265fb85d..b23fe37f67c0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -144,7 +144,7 @@ config ACPI_VIDEO config ACPI_FAN tristate "Fan" - select THERMAL + depends on THERMAL default y help This driver supports ACPI fan devices, allowing user-mode diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 505d4d79fe3e..c3b2fcb729f3 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -43,6 +43,7 @@ acpi-y += pci_root.o pci_link.o pci_irq.o acpi-y += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += acpi_pnp.o +acpi-y += int340x_thermal.o acpi-y += power.o acpi-y += event.o acpi-y += sysfs.o diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 2bf9082f7523..a3c89a1bcf54 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -113,3 +113,4 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev) kfree(resources); return pdev; } +EXPORT_SYMBOL_GPL(acpi_create_platform_device); diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index bea6896be122..7103de034c9e 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -343,6 +343,7 @@ int acpi_device_update_power(struct acpi_device *device, int *state_p) return 0; } +EXPORT_SYMBOL_GPL(acpi_device_update_power); int acpi_bus_update_power(acpi_handle handle, int *state_p) { diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 5328b1090e08..caf9b76b7ef8 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -30,22 +30,19 @@ #include <linux/uaccess.h> #include <linux/thermal.h> #include <linux/acpi.h> - -#define ACPI_FAN_CLASS "fan" -#define ACPI_FAN_FILE_STATE "state" - -#define _COMPONENT ACPI_FAN_COMPONENT -ACPI_MODULE_NAME("fan"); +#include <linux/platform_device.h> +#include <linux/sort.h> MODULE_AUTHOR("Paul Diefenbaugh"); MODULE_DESCRIPTION("ACPI Fan Driver"); MODULE_LICENSE("GPL"); -static int acpi_fan_add(struct acpi_device *device); -static int acpi_fan_remove(struct acpi_device *device); +static int acpi_fan_probe(struct platform_device *pdev); +static int acpi_fan_remove(struct platform_device *pdev); static const struct acpi_device_id fan_device_ids[] = { {"PNP0C0B", 0}, + {"INT3404", 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, fan_device_ids); @@ -64,37 +61,100 @@ static struct dev_pm_ops acpi_fan_pm = { #define FAN_PM_OPS_PTR NULL #endif -static struct acpi_driver acpi_fan_driver = { - .name = "fan", - .class = ACPI_FAN_CLASS, - .ids = fan_device_ids, - .ops = { - .add = acpi_fan_add, - .remove = acpi_fan_remove, - }, - .drv.pm = FAN_PM_OPS_PTR, +struct acpi_fan_fps { + u64 control; + u64 trip_point; + u64 speed; + u64 noise_level; + u64 power; +}; + +struct acpi_fan_fif { + u64 revision; + u64 fine_grain_ctrl; + u64 step_size; + u64 low_speed_notification; +}; + +struct acpi_fan { + bool acpi4; + struct acpi_fan_fif fif; + struct acpi_fan_fps *fps; + int fps_count; + struct thermal_cooling_device *cdev; +}; + +static struct platform_driver acpi_fan_driver = { + .probe = acpi_fan_probe, + .remove = acpi_fan_remove, + .driver = { + .name = "acpi-fan", + .acpi_match_table = fan_device_ids, + .pm = FAN_PM_OPS_PTR, + }, }; /* thermal cooling device callbacks */ static int fan_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { - /* ACPI fan device only support two states: ON/OFF */ - *state = 1; + struct acpi_device *device = cdev->devdata; + struct acpi_fan *fan = acpi_driver_data(device); + + if (fan->acpi4) + *state = fan->fps_count - 1; + else + *state = 1; return 0; } -static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long - *state) +static int fan_get_state_acpi4(struct acpi_device *device, unsigned long *state) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_fan *fan = acpi_driver_data(device); + union acpi_object *obj; + acpi_status status; + int control, i; + + status = acpi_evaluate_object(device->handle, "_FST", NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, "Get fan state failed\n"); + return status; + } + + obj = buffer.pointer; + if (!obj || obj->type != ACPI_TYPE_PACKAGE || + obj->package.count != 3 || + obj->package.elements[1].type != ACPI_TYPE_INTEGER) { + dev_err(&device->dev, "Invalid _FST data\n"); + status = -EINVAL; + goto err; + } + + control = obj->package.elements[1].integer.value; + for (i = 0; i < fan->fps_count; i++) { + if (control == fan->fps[i].control) + break; + } + if (i == fan->fps_count) { + dev_dbg(&device->dev, "Invalid control value returned\n"); + status = -EINVAL; + goto err; + } + + *state = i; + +err: + kfree(obj); + return status; +} + +static int fan_get_state(struct acpi_device *device, unsigned long *state) { - struct acpi_device *device = cdev->devdata; int result; int acpi_state = ACPI_STATE_D0; - if (!device) - return -EINVAL; - - result = acpi_bus_update_power(device->handle, &acpi_state); + result = acpi_device_update_power(device, &acpi_state); if (result) return result; @@ -103,21 +163,57 @@ static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long return 0; } -static int -fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) +static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long + *state) { struct acpi_device *device = cdev->devdata; - int result; + struct acpi_fan *fan = acpi_driver_data(device); - if (!device || (state != 0 && state != 1)) + if (fan->acpi4) + return fan_get_state_acpi4(device, state); + else + return fan_get_state(device, state); +} + +static int fan_set_state(struct acpi_device *device, unsigned long state) +{ + if (state != 0 && state != 1) return -EINVAL; - result = acpi_bus_set_power(device->handle, - state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD); + return acpi_device_set_power(device, + state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD); +} - return result; +static int fan_set_state_acpi4(struct acpi_device *device, unsigned long state) +{ + struct acpi_fan *fan = acpi_driver_data(device); + acpi_status status; + + if (state >= fan->fps_count) + return -EINVAL; + + status = acpi_execute_simple_method(device->handle, "_FSL", + fan->fps[state].control); + if (ACPI_FAILURE(status)) { + dev_dbg(&device->dev, "Failed to set state by _FSL\n"); + return status; + } + + return 0; } +static int +fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) +{ + struct acpi_device *device = cdev->devdata; + struct acpi_fan *fan = acpi_driver_data(device); + + if (fan->acpi4) + return fan_set_state_acpi4(device, state); + else + return fan_set_state(device, state); + } + static const struct thermal_cooling_device_ops fan_cooling_ops = { .get_max_state = fan_get_max_state, .get_cur_state = fan_get_cur_state, @@ -129,21 +225,125 @@ static const struct thermal_cooling_device_ops fan_cooling_ops = { * -------------------------------------------------------------------------- */ -static int acpi_fan_add(struct acpi_device *device) +static bool acpi_fan_is_acpi4(struct acpi_device *device) { - int result = 0; - struct thermal_cooling_device *cdev; + return acpi_has_method(device->handle, "_FIF") && + acpi_has_method(device->handle, "_FPS") && + acpi_has_method(device->handle, "_FSL") && + acpi_has_method(device->handle, "_FST"); +} - if (!device) - return -EINVAL; +static int acpi_fan_get_fif(struct acpi_device *device) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_fan *fan = acpi_driver_data(device); + struct acpi_buffer format = { sizeof("NNNN"), "NNNN" }; + struct acpi_buffer fif = { sizeof(fan->fif), &fan->fif }; + union acpi_object *obj; + acpi_status status; + + status = acpi_evaluate_object(device->handle, "_FIF", NULL, &buffer); + if (ACPI_FAILURE(status)) + return status; + + obj = buffer.pointer; + if (!obj || obj->type != ACPI_TYPE_PACKAGE) { + dev_err(&device->dev, "Invalid _FIF data\n"); + status = -EINVAL; + goto err; + } - strcpy(acpi_device_name(device), "Fan"); - strcpy(acpi_device_class(device), ACPI_FAN_CLASS); + status = acpi_extract_package(obj, &format, &fif); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, "Invalid _FIF element\n"); + status = -EINVAL; + } - result = acpi_bus_update_power(device->handle, NULL); - if (result) { - dev_err(&device->dev, "Setting initial power state\n"); - goto end; +err: + kfree(obj); + return status; +} + +static int acpi_fan_speed_cmp(const void *a, const void *b) +{ + const struct acpi_fan_fps *fps1 = a; + const struct acpi_fan_fps *fps2 = b; + return fps1->speed - fps2->speed; +} + +static int acpi_fan_get_fps(struct acpi_device *device) +{ + struct acpi_fan *fan = acpi_driver_data(device); + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + int i; + + status = acpi_evaluate_object(device->handle, "_FPS", NULL, &buffer); + if (ACPI_FAILURE(status)) + return status; + + obj = buffer.pointer; + if (!obj || obj->type != ACPI_TYPE_PACKAGE || obj->package.count < 2) { + dev_err(&device->dev, "Invalid _FPS data\n"); + status = -EINVAL; + goto err; + } + + fan->fps_count = obj->package.count - 1; /* minus revision field */ + fan->fps = devm_kzalloc(&device->dev, + fan->fps_count * sizeof(struct acpi_fan_fps), + GFP_KERNEL); + if (!fan->fps) { + dev_err(&device->dev, "Not enough memory\n"); + status = -ENOMEM; + goto err; + } + for (i = 0; i < fan->fps_count; i++) { + struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" }; + struct acpi_buffer fps = { sizeof(fan->fps[i]), &fan->fps[i] }; + status = acpi_extract_package(&obj->package.elements[i + 1], + &format, &fps); + if (ACPI_FAILURE(status)) { + dev_err(&device->dev, "Invalid _FPS element\n"); + break; + } + } + + /* sort the state array according to fan speed in increase order */ + sort(fan->fps, fan->fps_count, sizeof(*fan->fps), + acpi_fan_speed_cmp, NULL); + +err: + kfree(obj); + return status; +} + +static int acpi_fan_probe(struct platform_device *pdev) +{ + int result = 0; + struct thermal_cooling_device *cdev; + struct acpi_fan *fan; + struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + + fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL); + if (!fan) { + dev_err(&device->dev, "No memory for fan\n"); + return -ENOMEM; + } + device->driver_data = fan; + platform_set_drvdata(pdev, fan); + + if (acpi_fan_is_acpi4(device)) { + if (acpi_fan_get_fif(device) || acpi_fan_get_fps(device)) + goto end; + fan->acpi4 = true; + } else { + result = acpi_device_update_power(device, NULL); + if (result) { + dev_err(&device->dev, "Setting initial power state\n"); + goto end; + } } cdev = thermal_cooling_device_register("Fan", device, @@ -153,44 +353,32 @@ static int acpi_fan_add(struct acpi_device *device) goto end; } - dev_dbg(&device->dev, "registered as cooling_device%d\n", cdev->id); + dev_dbg(&pdev->dev, "registered as cooling_device%d\n", cdev->id); - device->driver_data = cdev; - result = sysfs_create_link(&device->dev.kobj, + fan->cdev = cdev; + result = sysfs_create_link(&pdev->dev.kobj, &cdev->device.kobj, "thermal_cooling"); if (result) - dev_err(&device->dev, "Failed to create sysfs link " - "'thermal_cooling'\n"); + dev_err(&pdev->dev, "Failed to create sysfs link 'thermal_cooling'\n"); result = sysfs_create_link(&cdev->device.kobj, - &device->dev.kobj, + &pdev->dev.kobj, "device"); if (result) - dev_err(&device->dev, "Failed to create sysfs link 'device'\n"); - - dev_info(&device->dev, "ACPI: %s [%s] (%s)\n", - acpi_device_name(device), acpi_device_bid(device), - !device->power.state ? "on" : "off"); + dev_err(&pdev->dev, "Failed to create sysfs link 'device'\n"); end: return result; } -static int acpi_fan_remove(struct acpi_device *device) +static int acpi_fan_remove(struct platform_device *pdev) { - struct thermal_cooling_device *cdev; - - if (!device) - return -EINVAL; - - cdev = acpi_driver_data(device); - if (!cdev) - return -EINVAL; + struct acpi_fan *fan = platform_get_drvdata(pdev); - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - sysfs_remove_link(&cdev->device.kobj, "device"); - thermal_cooling_device_unregister(cdev); + sysfs_remove_link(&pdev->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&fan->cdev->device.kobj, "device"); + thermal_cooling_device_unregister(fan->cdev); return 0; } @@ -198,10 +386,11 @@ static int acpi_fan_remove(struct acpi_device *device) #ifdef CONFIG_PM_SLEEP static int acpi_fan_suspend(struct device *dev) { - if (!dev) - return -EINVAL; + struct acpi_fan *fan = dev_get_drvdata(dev); + if (fan->acpi4) + return 0; - acpi_bus_set_power(to_acpi_device(dev)->handle, ACPI_STATE_D0); + acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D0); return AE_OK; } @@ -209,11 +398,12 @@ static int acpi_fan_suspend(struct device *dev) static int acpi_fan_resume(struct device *dev) { int result; + struct acpi_fan *fan = dev_get_drvdata(dev); - if (!dev) - return -EINVAL; + if (fan->acpi4) + return 0; - result = acpi_bus_update_power(to_acpi_device(dev)->handle, NULL); + result = acpi_device_update_power(ACPI_COMPANION(dev), NULL); if (result) dev_err(dev, "Error updating fan power state\n"); @@ -221,4 +411,4 @@ static int acpi_fan_resume(struct device *dev) } #endif -module_acpi_driver(acpi_fan_driver); +module_platform_driver(acpi_fan_driver); diff --git a/drivers/acpi/int340x_thermal.c b/drivers/acpi/int340x_thermal.c new file mode 100644 index 000000000000..a27d31d1ba24 --- /dev/null +++ b/drivers/acpi/int340x_thermal.c @@ -0,0 +1,51 @@ +/* + * ACPI support for int340x thermal drivers + * + * Copyright (C) 2014, Intel Corporation + * Authors: Zhang Rui <rui.zhang@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <linux/module.h> + +#include "internal.h" + +#define DO_ENUMERATION 0x01 +static const struct acpi_device_id int340x_thermal_device_ids[] = { + {"INT3400", DO_ENUMERATION }, + {"INT3401"}, + {"INT3402"}, + {"INT3403"}, + {"INT3404"}, + {"INT3406"}, + {"INT3407"}, + {"INT3408"}, + {"INT3409"}, + {"INT340A"}, + {"INT340B"}, + {""}, +}; + +static int int340x_thermal_handler_attach(struct acpi_device *adev, + const struct acpi_device_id *id) +{ +#if defined(CONFIG_INT340X_THERMAL) || defined(CONFIG_INT340X_THERMAL_MODULE) + if (id->driver_data == DO_ENUMERATION) + acpi_create_platform_device(adev); +#endif + return 1; +} + +static struct acpi_scan_handler int340x_thermal_handler = { + .ids = int340x_thermal_device_ids, + .attach = int340x_thermal_handler_attach, +}; + +void __init acpi_int340x_thermal_init(void) +{ + acpi_scan_add_handler(&int340x_thermal_handler); +} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 4c5cf77e7576..447f6d679b29 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -31,6 +31,7 @@ void acpi_pci_link_init(void); void acpi_processor_init(void); void acpi_platform_init(void); void acpi_pnp_init(void); +void acpi_int340x_thermal_init(void); int acpi_sysfs_init(void); void acpi_container_init(void); void acpi_memory_hotplug_init(void); @@ -103,8 +104,6 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state); int acpi_power_on_resources(struct acpi_device *device, int state); int acpi_power_transition(struct acpi_device *device, int state); -int acpi_device_update_power(struct acpi_device *device, int *state_p); - int acpi_wakeup_device_init(void); #ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC @@ -168,13 +167,6 @@ static inline void suspend_nvs_restore(void) {} #endif /*-------------------------------------------------------------------------- - Platform bus support - -------------------------------------------------------------------------- */ -struct platform_device; - -struct platform_device *acpi_create_platform_device(struct acpi_device *adev); - -/*-------------------------------------------------------------------------- Video -------------------------------------------------------------------------- */ #if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ae44d8654c82..095c6ddde8a3 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2315,6 +2315,7 @@ int __init acpi_scan_init(void) acpi_container_init(); acpi_memory_hotplug_init(); acpi_pnp_init(); + acpi_int340x_thermal_init(); mutex_lock(&acpi_scan_lock); /* diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 112817e963e0..d24fa1964eb8 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -528,7 +528,6 @@ static void acpi_thermal_check(void *data) } /* sys I/F for generic thermal sysfs support */ -#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100) static int thermal_get_temp(struct thermal_zone_device *thermal, unsigned long *temp) @@ -543,7 +542,8 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, if (result) return result; - *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset); + *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(tz->temperature, + tz->kelvin_offset); return 0; } @@ -647,7 +647,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.critical.flags.valid) { if (!trip) { - *temp = KELVIN_TO_MILLICELSIUS( + *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( tz->trips.critical.temperature, tz->kelvin_offset); return 0; @@ -657,7 +657,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.hot.flags.valid) { if (!trip) { - *temp = KELVIN_TO_MILLICELSIUS( + *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( tz->trips.hot.temperature, tz->kelvin_offset); return 0; @@ -667,7 +667,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.passive.flags.valid) { if (!trip) { - *temp = KELVIN_TO_MILLICELSIUS( + *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( tz->trips.passive.temperature, tz->kelvin_offset); return 0; @@ -678,7 +678,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE && tz->trips.active[i].flags.valid; i++) { if (!trip) { - *temp = KELVIN_TO_MILLICELSIUS( + *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( tz->trips.active[i].temperature, tz->kelvin_offset); return 0; @@ -694,7 +694,7 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal, struct acpi_thermal *tz = thermal->devdata; if (tz->trips.critical.flags.valid) { - *temperature = KELVIN_TO_MILLICELSIUS( + *temperature = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( tz->trips.critical.temperature, tz->kelvin_offset); return 0; @@ -714,8 +714,8 @@ static int thermal_get_trend(struct thermal_zone_device *thermal, if (type == THERMAL_TRIP_ACTIVE) { unsigned long trip_temp; - unsigned long temp = KELVIN_TO_MILLICELSIUS(tz->temperature, - tz->kelvin_offset); + unsigned long temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET( + tz->temperature, tz->kelvin_offset); if (thermal_get_trip_temp(thermal, trip, &trip_temp)) return -EINVAL; diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 834f35c4bf8d..371ac12d25b1 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -149,6 +149,21 @@ acpi_extract_package(union acpi_object *package, break; } break; + case ACPI_TYPE_LOCAL_REFERENCE: + switch (format_string[i]) { + case 'R': + size_required += sizeof(void *); + tail_offset += sizeof(void *); + break; + default: + printk(KERN_WARNING PREFIX "Invalid package element" + " [%d] got reference," + " expecting [%c]\n", + i, format_string[i]); + return AE_BAD_DATA; + break; + } + break; case ACPI_TYPE_PACKAGE: default: @@ -247,7 +262,18 @@ acpi_extract_package(union acpi_object *package, break; } break; - + case ACPI_TYPE_LOCAL_REFERENCE: + switch (format_string[i]) { + case 'R': + *(void **)head = + (void *)element->reference.handle; + head += sizeof(void *); + break; + default: + /* Should never get here */ + break; + } + break; case ACPI_TYPE_PACKAGE: /* TBD: handle nested packages... */ default: diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index ef5587fe2c69..f554d25b4399 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -84,6 +84,16 @@ config THERMAL_GOV_STEP_WISE Enable this to manage platform thermals using a simple linear governor. +config THERMAL_GOV_BANG_BANG + bool "Bang Bang thermal governor" + default n + help + Enable this to manage platform thermals using bang bang governor. + + Say 'Y' here if you want to use two point temperature regulation + used for fans without throttling. Some fan drivers depend on this + governor to be enabled (e.g. acerhdf). + config THERMAL_GOV_USER_SPACE bool "User_space thermal governor" help @@ -207,21 +217,6 @@ config X86_PKG_TEMP_THERMAL two trip points which can be set by user to get notifications via thermal notification methods. -config ACPI_INT3403_THERMAL - tristate "ACPI INT3403 thermal driver" - depends on X86 && ACPI - help - Newer laptops and tablets that use ACPI may have thermal sensors - outside the core CPU/SOC for thermal safety reasons. These - temperature sensors are also exposed for the OS to use via the so - called INT3403 ACPI object. This driver will, on devices that have - such sensors, expose the temperature information from these sensors - to userspace via the normal thermal framework. This means that a wide - range of applications and GUI widgets can show this information to - the user or use this information for making decisions. For example, - the Intel Thermal Daemon can use this information to allow the user - to select his laptop to run without turning on the fans. - config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && IOSF_MBI @@ -234,6 +229,30 @@ config INTEL_SOC_DTS_THERMAL notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. +config INT340X_THERMAL + tristate "ACPI INT340X thermal drivers" + depends on X86 && ACPI + select THERMAL_GOV_USER_SPACE + select ACPI_THERMAL_REL + select ACPI_FAN + help + Newer laptops and tablets that use ACPI may have thermal sensors and + other devices with thermal control capabilities outside the core + CPU/SOC, for thermal safety reasons. + They are exposed for the OS to use via the INT3400 ACPI device object + as the master, and INT3401~INT340B ACPI device objects as the slaves. + Enable this to expose the temperature information and cooling ability + from these objects to userspace via the normal thermal framework. + This means that a wide range of applications and GUI widgets can show + the information to the user or use this information for making + decisions. For example, the Intel Thermal Daemon can use this + information to allow the user to select his laptop to run without + turning on the fans. + +config ACPI_THERMAL_REL + tristate + depends on ACPI + menu "Texas Instruments thermal drivers" source "drivers/thermal/ti-soc-thermal/Kconfig" endmenu diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31e232f84b6b..39c4fe87da2f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -11,6 +11,7 @@ thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o +thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o @@ -31,5 +32,5 @@ obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ -obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_ST_THERMAL) += st/ diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 944ba2f340c8..6e0a3fbfae86 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -23,6 +23,7 @@ */ #include <linux/thermal.h> +#include <trace/events/thermal.h> #include "thermal_core.h" @@ -34,6 +35,7 @@ static int get_trip_level(struct thermal_zone_device *tz) { int count = 0; unsigned long trip_temp; + enum thermal_trip_type trip_type; if (tz->trips == 0 || !tz->ops->get_trip_temp) return 0; @@ -43,6 +45,16 @@ static int get_trip_level(struct thermal_zone_device *tz) if (tz->temperature < trip_temp) break; } + + /* + * count > 0 only if temperature is greater than first trip + * point, in which case, trip_point = count - 1 + */ + if (count > 0) { + tz->ops->get_trip_type(tz, count - 1, &trip_type); + trace_thermal_zone_trip(tz, count - 1, trip_type); + } + return count; } diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c new file mode 100644 index 000000000000..c5dd76b2ee74 --- /dev/null +++ b/drivers/thermal/gov_bang_bang.c @@ -0,0 +1,131 @@ +/* + * gov_bang_bang.c - A simple thermal throttling governor using hysteresis + * + * Copyright (C) 2014 Peter Feuerer <peter@piie.net> + * + * Based on step_wise.c with following Copyrights: + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + */ + +#include <linux/thermal.h> + +#include "thermal_core.h" + +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +{ + long trip_temp; + unsigned long trip_hyst; + struct thermal_instance *instance; + + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + + dev_dbg(&tz->device, "Trip%d[temp=%ld]:temp=%d:hyst=%ld\n", + trip, trip_temp, tz->temperature, + trip_hyst); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + /* in case fan is in initial state, switch the fan off */ + if (instance->target == THERMAL_NO_TARGET) + instance->target = 0; + + /* in case fan is neither on nor off set the fan to active */ + if (instance->target != 0 && instance->target != 1) { + pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n", + instance->name, instance->target); + instance->target = 1; + } + + /* + * enable fan when temperature exceeds trip_temp and disable + * the fan in case it falls below trip_temp minus hysteresis + */ + if (instance->target == 0 && tz->temperature >= trip_temp) + instance->target = 1; + else if (instance->target == 1 && + tz->temperature < trip_temp - trip_hyst) + instance->target = 0; + + dev_dbg(&instance->cdev->device, "target=%d\n", + (int)instance->target); + + instance->cdev->updated = false; /* cdev needs update */ + } + + mutex_unlock(&tz->lock); +} + +/** + * bang_bang_control - controls devices associated with the given zone + * @tz - thermal_zone_device + * @trip - the trip point + * + * Regulation Logic: a two point regulation, deliver cooling state depending + * on the previous state shown in this diagram: + * + * Fan: OFF ON + * + * | + * | + * trip_temp: +---->+ + * | | ^ + * | | | + * | | Temperature + * (trip_temp - hyst): +<----+ + * | + * | + * | + * + * * If the fan is not running and temperature exceeds trip_temp, the fan + * gets turned on. + * * In case the fan is running, temperature must fall below + * (trip_temp - hyst) so that the fan gets turned off again. + * + */ +static int bang_bang_control(struct thermal_zone_device *tz, int trip) +{ + struct thermal_instance *instance; + + thermal_zone_trip_update(tz, trip); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) + thermal_cdev_update(instance->cdev); + + mutex_unlock(&tz->lock); + + return 0; +} + +static struct thermal_governor thermal_gov_bang_bang = { + .name = "bang_bang", + .throttle = bang_bang_control, +}; + +int thermal_gov_bang_bang_register(void) +{ + return thermal_register_governor(&thermal_gov_bang_bang); +} + +void thermal_gov_bang_bang_unregister(void) +{ + thermal_unregister_governor(&thermal_gov_bang_bang); +} diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 2c516f2eebed..461bf3d033a0 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -19,6 +19,7 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -31,6 +32,11 @@ #define MISC0 0x0150 #define MISC0_REFTOP_SELBIASOFF (1 << 3) +#define MISC1 0x0160 +#define MISC1_IRQ_TEMPHIGH (1 << 29) +/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */ +#define MISC1_IRQ_TEMPLOW (1 << 28) +#define MISC1_IRQ_TEMPPANIC (1 << 27) #define TEMPSENSE0 0x0180 #define TEMPSENSE0_ALARM_VALUE_SHIFT 20 @@ -43,6 +49,12 @@ #define TEMPSENSE1 0x0190 #define TEMPSENSE1_MEASURE_FREQ 0xffff +/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */ +#define TEMPSENSE2 0x0290 +#define TEMPSENSE2_LOW_VALUE_SHIFT 0 +#define TEMPSENSE2_LOW_VALUE_MASK 0xfff +#define TEMPSENSE2_PANIC_VALUE_SHIFT 16 +#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 #define OCOTP_ANA1 0x04e0 @@ -66,6 +78,21 @@ enum imx_thermal_trip { #define FACTOR1 15976 #define FACTOR2 4297157 +#define TEMPMON_IMX6Q 1 +#define TEMPMON_IMX6SX 2 + +struct thermal_soc_data { + u32 version; +}; + +static struct thermal_soc_data thermal_imx6q_data = { + .version = TEMPMON_IMX6Q, +}; + +static struct thermal_soc_data thermal_imx6sx_data = { + .version = TEMPMON_IMX6SX, +}; + struct imx_thermal_data { struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; @@ -79,8 +106,21 @@ struct imx_thermal_data { bool irq_enabled; int irq; struct clk *thermal_clk; + const struct thermal_soc_data *socdata; }; +static void imx_set_panic_temp(struct imx_thermal_data *data, + signed long panic_temp) +{ + struct regmap *map = data->tempmon; + int critical_value; + + critical_value = (data->c2 - panic_temp) / data->c1; + regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK); + regmap_write(map, TEMPSENSE2 + REG_SET, critical_value << + TEMPSENSE2_PANIC_VALUE_SHIFT); +} + static void imx_set_alarm_temp(struct imx_thermal_data *data, signed long alarm_temp) { @@ -142,13 +182,17 @@ static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp) /* See imx_get_sensor_data() for formula derivation */ *temp = data->c2 - n_meas * data->c1; - /* Update alarm value to next higher trip point */ - if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive) - imx_set_alarm_temp(data, data->temp_critical); - if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) { - imx_set_alarm_temp(data, data->temp_passive); - dev_dbg(&tz->device, "thermal alarm off: T < %lu\n", - data->alarm_temp / 1000); + /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ + if (data->socdata->version == TEMPMON_IMX6Q) { + if (data->alarm_temp == data->temp_passive && + *temp >= data->temp_passive) + imx_set_alarm_temp(data, data->temp_critical); + if (data->alarm_temp == data->temp_critical && + *temp < data->temp_passive) { + imx_set_alarm_temp(data, data->temp_passive); + dev_dbg(&tz->device, "thermal alarm off: T < %lu\n", + data->alarm_temp / 1000); + } } if (*temp != data->last_temp) { @@ -398,8 +442,17 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) return IRQ_HANDLED; } +static const struct of_device_id of_imx_thermal_match[] = { + { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, }, + { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_imx_thermal_match); + static int imx_thermal_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(of_imx_thermal_match, &pdev->dev); struct imx_thermal_data *data; struct cpumask clip_cpus; struct regmap *map; @@ -418,6 +471,20 @@ static int imx_thermal_probe(struct platform_device *pdev) } data->tempmon = map; + data->socdata = of_id->data; + + /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ + if (data->socdata->version == TEMPMON_IMX6SX) { + regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH | + MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC); + /* + * reset value of LOW ALARM is incorrect, set it to lowest + * value to avoid false trigger of low alarm. + */ + regmap_write(map, TEMPSENSE2 + REG_SET, + TEMPSENSE2_LOW_VALUE_MASK); + } + data->irq = platform_get_irq(pdev, 0); if (data->irq < 0) return data->irq; @@ -489,6 +556,10 @@ static int imx_thermal_probe(struct platform_device *pdev) measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq); imx_set_alarm_temp(data, data->temp_passive); + + if (data->socdata->version == TEMPMON_IMX6SX) + imx_set_panic_temp(data, data->temp_critical); + regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); @@ -550,12 +621,6 @@ static int imx_thermal_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops, imx_thermal_suspend, imx_thermal_resume); -static const struct of_device_id of_imx_thermal_match[] = { - { .compatible = "fsl,imx6q-tempmon", }, - { /* end */ } -}; -MODULE_DEVICE_TABLE(of, of_imx_thermal_match); - static struct platform_driver imx_thermal = { .driver = { .name = "imx_thermal", diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c deleted file mode 100644 index 17554eeb3953..000000000000 --- a/drivers/thermal/int3403_thermal.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * ACPI INT3403 thermal driver - * Copyright (c) 2013, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/acpi.h> -#include <linux/thermal.h> - -#define INT3403_TYPE_SENSOR 0x03 -#define INT3403_PERF_CHANGED_EVENT 0x80 -#define INT3403_THERMAL_EVENT 0x90 - -#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100) -#define KELVIN_OFFSET 2732 -#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off)) - -#define ACPI_INT3403_CLASS "int3403" -#define ACPI_INT3403_FILE_STATE "state" - -struct int3403_sensor { - struct thermal_zone_device *tzone; - unsigned long *thresholds; - unsigned long crit_temp; - int crit_trip_id; - unsigned long psv_temp; - int psv_trip_id; -}; - -static int sys_get_curr_temp(struct thermal_zone_device *tzone, - unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - unsigned long long tmp; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET); - - return 0; -} - -static int sys_get_trip_hyst(struct thermal_zone_device *tzone, - int trip, unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - unsigned long long hyst; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst); - if (ACPI_FAILURE(status)) - return -EIO; - - /* - * Thermal hysteresis represents a temperature difference. - * Kelvin and Celsius have same degree size. So the - * conversion here between tenths of degree Kelvin unit - * and Milli-Celsius unit is just to multiply 100. - */ - *temp = hyst * 100; - - return 0; -} - -static int sys_get_trip_temp(struct thermal_zone_device *tzone, - int trip, unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - struct int3403_sensor *obj = acpi_driver_data(device); - - if (trip == obj->crit_trip_id) - *temp = obj->crit_temp; - else if (trip == obj->psv_trip_id) - *temp = obj->psv_temp; - else { - /* - * get_trip_temp is a mandatory callback but - * PATx method doesn't return any value, so return - * cached value, which was last set from user space. - */ - *temp = obj->thresholds[trip]; - } - - return 0; -} - -static int sys_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) -{ - struct acpi_device *device = thermal->devdata; - struct int3403_sensor *obj = acpi_driver_data(device); - - /* Mandatory callback, may not mean much here */ - if (trip == obj->crit_trip_id) - *type = THERMAL_TRIP_CRITICAL; - else - *type = THERMAL_TRIP_PASSIVE; - - return 0; -} - -int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip, - unsigned long temp) -{ - struct acpi_device *device = tzone->devdata; - acpi_status status; - char name[10]; - int ret = 0; - struct int3403_sensor *obj = acpi_driver_data(device); - - snprintf(name, sizeof(name), "PAT%d", trip); - if (acpi_has_method(device->handle, name)) { - status = acpi_execute_simple_method(device->handle, name, - MILLI_CELSIUS_TO_DECI_KELVIN(temp, - KELVIN_OFFSET)); - if (ACPI_FAILURE(status)) - ret = -EIO; - else - obj->thresholds[trip] = temp; - } else { - ret = -EIO; - dev_err(&device->dev, "sys_set_trip_temp: method not found\n"); - } - - return ret; -} - -static struct thermal_zone_device_ops tzone_ops = { - .get_temp = sys_get_curr_temp, - .get_trip_temp = sys_get_trip_temp, - .get_trip_type = sys_get_trip_type, - .set_trip_temp = sys_set_trip_temp, - .get_trip_hyst = sys_get_trip_hyst, -}; - -static void acpi_thermal_notify(struct acpi_device *device, u32 event) -{ - struct int3403_sensor *obj; - - if (!device) - return; - - obj = acpi_driver_data(device); - if (!obj) - return; - - switch (event) { - case INT3403_PERF_CHANGED_EVENT: - break; - case INT3403_THERMAL_EVENT: - thermal_zone_device_update(obj->tzone); - break; - default: - dev_err(&device->dev, "Unsupported event [0x%x]\n", event); - break; - } -} - -static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) -{ - unsigned long long crt; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); - - return 0; -} - -static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) -{ - unsigned long long psv; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); - - return 0; -} - -static int acpi_int3403_add(struct acpi_device *device) -{ - int result = 0; - unsigned long long ptyp; - acpi_status status; - struct int3403_sensor *obj; - unsigned long long trip_cnt; - int trip_mask = 0; - - if (!device) - return -EINVAL; - - status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp); - if (ACPI_FAILURE(status)) - return -EINVAL; - - if (ptyp != INT3403_TYPE_SENSOR) - return -EINVAL; - - obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL); - if (!obj) - return -ENOMEM; - - device->driver_data = obj; - - status = acpi_evaluate_integer(device->handle, "PATC", NULL, - &trip_cnt); - if (ACPI_FAILURE(status)) - trip_cnt = 0; - - if (trip_cnt) { - /* We have to cache, thresholds can't be readback */ - obj->thresholds = devm_kzalloc(&device->dev, - sizeof(*obj->thresholds) * trip_cnt, - GFP_KERNEL); - if (!obj->thresholds) - return -ENOMEM; - trip_mask = BIT(trip_cnt) - 1; - } - - obj->psv_trip_id = -1; - if (!sys_get_trip_psv(device, &obj->psv_temp)) - obj->psv_trip_id = trip_cnt++; - - obj->crit_trip_id = -1; - if (!sys_get_trip_crt(device, &obj->crit_temp)) - obj->crit_trip_id = trip_cnt++; - - obj->tzone = thermal_zone_device_register(acpi_device_bid(device), - trip_cnt, trip_mask, device, &tzone_ops, - NULL, 0, 0); - if (IS_ERR(obj->tzone)) { - result = PTR_ERR(obj->tzone); - return result; - } - - strcpy(acpi_device_name(device), "INT3403"); - strcpy(acpi_device_class(device), ACPI_INT3403_CLASS); - - return 0; -} - -static int acpi_int3403_remove(struct acpi_device *device) -{ - struct int3403_sensor *obj; - - obj = acpi_driver_data(device); - thermal_zone_device_unregister(obj->tzone); - - return 0; -} - -ACPI_MODULE_NAME("int3403"); -static const struct acpi_device_id int3403_device_ids[] = { - {"INT3403", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, int3403_device_ids); - -static struct acpi_driver acpi_int3403_driver = { - .name = "INT3403", - .class = ACPI_INT3403_CLASS, - .ids = int3403_device_ids, - .ops = { - .add = acpi_int3403_add, - .remove = acpi_int3403_remove, - .notify = acpi_thermal_notify, - }, -}; - -module_acpi_driver(acpi_int3403_driver); - -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("ACPI INT3403 thermal driver"); diff --git a/drivers/thermal/int340x_thermal/Makefile b/drivers/thermal/int340x_thermal/Makefile new file mode 100644 index 000000000000..ffe40bffaf1a --- /dev/null +++ b/drivers/thermal/int340x_thermal/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o +obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c new file mode 100644 index 000000000000..0d8db808f0ae --- /dev/null +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c @@ -0,0 +1,400 @@ +/* acpi_thermal_rel.c driver for exporting ACPI thermal relationship + * + * Copyright (c) 2014 Intel Corp + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + */ + +/* + * Two functionalities included: + * 1. Export _TRT, _ART, via misc device interface to the userspace. + * 2. Provide parsing result to kernel drivers + * + */ +#include <linux/init.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/uaccess.h> +#include <linux/miscdevice.h> +#include "acpi_thermal_rel.h" + +static acpi_handle acpi_thermal_rel_handle; +static DEFINE_SPINLOCK(acpi_thermal_rel_chrdev_lock); +static int acpi_thermal_rel_chrdev_count; /* #times opened */ +static int acpi_thermal_rel_chrdev_exclu; /* already open exclusive? */ + +static int acpi_thermal_rel_open(struct inode *inode, struct file *file) +{ + spin_lock(&acpi_thermal_rel_chrdev_lock); + if (acpi_thermal_rel_chrdev_exclu || + (acpi_thermal_rel_chrdev_count && (file->f_flags & O_EXCL))) { + spin_unlock(&acpi_thermal_rel_chrdev_lock); + return -EBUSY; + } + + if (file->f_flags & O_EXCL) + acpi_thermal_rel_chrdev_exclu = 1; + acpi_thermal_rel_chrdev_count++; + + spin_unlock(&acpi_thermal_rel_chrdev_lock); + + return nonseekable_open(inode, file); +} + +static int acpi_thermal_rel_release(struct inode *inode, struct file *file) +{ + spin_lock(&acpi_thermal_rel_chrdev_lock); + acpi_thermal_rel_chrdev_count--; + acpi_thermal_rel_chrdev_exclu = 0; + spin_unlock(&acpi_thermal_rel_chrdev_lock); + + return 0; +} + +/** + * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling + * + * @handle: ACPI handle of the device contains _TRT + * @art_count: the number of valid entries resulted from parsing _TRT + * @artp: pointer to pointer of array of art entries in parsing result + * @create_dev: whether to create platform devices for target and source + * + */ +int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, + bool create_dev) +{ + acpi_status status; + int result = 0; + int i; + int nr_bad_entries = 0; + struct trt *trts; + struct acpi_device *adev; + union acpi_object *p; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer element = { 0, NULL }; + struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" }; + + if (!acpi_has_method(handle, "_TRT")) + return 0; + + status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buffer.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + pr_err("Invalid _TRT data\n"); + result = -EFAULT; + goto end; + } + + *trt_count = p->package.count; + trts = kzalloc(*trt_count * sizeof(struct trt), GFP_KERNEL); + if (!trts) { + result = -ENOMEM; + goto end; + } + + for (i = 0; i < *trt_count; i++) { + struct trt *trt = &trts[i - nr_bad_entries]; + + element.length = sizeof(struct trt); + element.pointer = trt; + + status = acpi_extract_package(&(p->package.elements[i]), + &trt_format, &element); + if (ACPI_FAILURE(status)) { + nr_bad_entries++; + pr_warn("_TRT package %d is invalid, ignored\n", i); + continue; + } + if (!create_dev) + continue; + + result = acpi_bus_get_device(trt->source, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + + result = acpi_bus_get_device(trt->target, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get target ACPI device\n"); + } + + *trtp = trts; + /* don't count bad entries */ + *trt_count -= nr_bad_entries; +end: + kfree(buffer.pointer); + return result; +} +EXPORT_SYMBOL(acpi_parse_trt); + +/** + * acpi_parse_art - Parse Active Relationship Table _ART + * + * @handle: ACPI handle of the device contains _ART + * @art_count: the number of valid entries resulted from parsing _ART + * @artp: pointer to pointer of array of art entries in parsing result + * @create_dev: whether to create platform devices for target and source + * + */ +int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, + bool create_dev) +{ + acpi_status status; + int result = 0; + int i; + int nr_bad_entries = 0; + struct art *arts; + struct acpi_device *adev; + union acpi_object *p; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer element = { 0, NULL }; + struct acpi_buffer art_format = { + sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" }; + + if (!acpi_has_method(handle, "_ART")) + return 0; + + status = acpi_evaluate_object(handle, "_ART", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buffer.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + pr_err("Invalid _ART data\n"); + result = -EFAULT; + goto end; + } + + /* ignore p->package.elements[0], as this is _ART Revision field */ + *art_count = p->package.count - 1; + arts = kzalloc(*art_count * sizeof(struct art), GFP_KERNEL); + if (!arts) { + result = -ENOMEM; + goto end; + } + + for (i = 0; i < *art_count; i++) { + struct art *art = &arts[i - nr_bad_entries]; + + element.length = sizeof(struct art); + element.pointer = art; + + status = acpi_extract_package(&(p->package.elements[i + 1]), + &art_format, &element); + if (ACPI_FAILURE(status)) { + pr_warn("_ART package %d is invalid, ignored", i); + nr_bad_entries++; + continue; + } + if (!create_dev) + continue; + + if (art->source) { + result = acpi_bus_get_device(art->source, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + } + if (art->target) { + result = acpi_bus_get_device(art->target, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + } + } + + *artp = arts; + /* don't count bad entries */ + *art_count -= nr_bad_entries; +end: + kfree(buffer.pointer); + return result; +} +EXPORT_SYMBOL(acpi_parse_art); + + +/* get device name from acpi handle */ +static void get_single_name(acpi_handle handle, char *name) +{ + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER}; + + if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer))) + pr_warn("Failed get name from handle\n"); + else { + memcpy(name, buffer.pointer, ACPI_NAME_SIZE); + kfree(buffer.pointer); + } +} + +static int fill_art(char __user *ubuf) +{ + int i; + int ret; + int count; + int art_len; + struct art *arts = NULL; + union art_object *art_user; + + ret = acpi_parse_art(acpi_thermal_rel_handle, &count, &arts, false); + if (ret) + goto free_art; + art_len = count * sizeof(union art_object); + art_user = kzalloc(art_len, GFP_KERNEL); + if (!art_user) { + ret = -ENOMEM; + goto free_art; + } + /* now fill in user art data */ + for (i = 0; i < count; i++) { + /* userspace art needs device name instead of acpi reference */ + get_single_name(arts[i].source, art_user[i].source_device); + get_single_name(arts[i].target, art_user[i].target_device); + /* copy the rest int data in addition to source and target */ + memcpy(&art_user[i].weight, &arts[i].weight, + sizeof(u64) * (ACPI_NR_ART_ELEMENTS - 2)); + } + + if (copy_to_user(ubuf, art_user, art_len)) + ret = -EFAULT; + kfree(art_user); +free_art: + kfree(arts); + return ret; +} + +static int fill_trt(char __user *ubuf) +{ + int i; + int ret; + int count; + int trt_len; + struct trt *trts = NULL; + union trt_object *trt_user; + + ret = acpi_parse_trt(acpi_thermal_rel_handle, &count, &trts, false); + if (ret) + goto free_trt; + trt_len = count * sizeof(union trt_object); + trt_user = kzalloc(trt_len, GFP_KERNEL); + if (!trt_user) { + ret = -ENOMEM; + goto free_trt; + } + /* now fill in user trt data */ + for (i = 0; i < count; i++) { + /* userspace trt needs device name instead of acpi reference */ + get_single_name(trts[i].source, trt_user[i].source_device); + get_single_name(trts[i].target, trt_user[i].target_device); + trt_user[i].sample_period = trts[i].sample_period; + trt_user[i].influence = trts[i].influence; + } + + if (copy_to_user(ubuf, trt_user, trt_len)) + ret = -EFAULT; + kfree(trt_user); +free_trt: + kfree(trts); + return ret; +} + +static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd, + unsigned long __arg) +{ + int ret = 0; + unsigned long length = 0; + unsigned long count = 0; + char __user *arg = (void __user *)__arg; + struct trt *trts; + struct art *arts; + + switch (cmd) { + case ACPI_THERMAL_GET_TRT_COUNT: + ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count, + &trts, false); + kfree(trts); + if (!ret) + return put_user(count, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_TRT_LEN: + ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count, + &trts, false); + kfree(trts); + length = count * sizeof(union trt_object); + if (!ret) + return put_user(length, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_TRT: + return fill_trt(arg); + case ACPI_THERMAL_GET_ART_COUNT: + ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count, + &arts, false); + kfree(arts); + if (!ret) + return put_user(count, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_ART_LEN: + ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count, + &arts, false); + kfree(arts); + length = count * sizeof(union art_object); + if (!ret) + return put_user(length, (unsigned long __user *)__arg); + return ret; + + case ACPI_THERMAL_GET_ART: + return fill_art(arg); + + default: + return -ENOTTY; + } +} + +static const struct file_operations acpi_thermal_rel_fops = { + .owner = THIS_MODULE, + .open = acpi_thermal_rel_open, + .release = acpi_thermal_rel_release, + .unlocked_ioctl = acpi_thermal_rel_ioctl, + .llseek = no_llseek, +}; + +static struct miscdevice acpi_thermal_rel_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + "acpi_thermal_rel", + &acpi_thermal_rel_fops +}; + +int acpi_thermal_rel_misc_device_add(acpi_handle handle) +{ + acpi_thermal_rel_handle = handle; + + return misc_register(&acpi_thermal_rel_misc_device); +} +EXPORT_SYMBOL(acpi_thermal_rel_misc_device_add); + +int acpi_thermal_rel_misc_device_remove(acpi_handle handle) +{ + misc_deregister(&acpi_thermal_rel_misc_device); + + return 0; +} +EXPORT_SYMBOL(acpi_thermal_rel_misc_device_remove); + +MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>"); +MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com"); +MODULE_DESCRIPTION("Intel acpi thermal rel misc dev driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h new file mode 100644 index 000000000000..f00700bc9d79 --- /dev/null +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h @@ -0,0 +1,84 @@ +#ifndef __ACPI_ACPI_THERMAL_H +#define __ACPI_ACPI_THERMAL_H + +#include <asm/ioctl.h> + +#define ACPI_THERMAL_MAGIC 's' + +#define ACPI_THERMAL_GET_TRT_LEN _IOR(ACPI_THERMAL_MAGIC, 1, unsigned long) +#define ACPI_THERMAL_GET_ART_LEN _IOR(ACPI_THERMAL_MAGIC, 2, unsigned long) +#define ACPI_THERMAL_GET_TRT_COUNT _IOR(ACPI_THERMAL_MAGIC, 3, unsigned long) +#define ACPI_THERMAL_GET_ART_COUNT _IOR(ACPI_THERMAL_MAGIC, 4, unsigned long) + +#define ACPI_THERMAL_GET_TRT _IOR(ACPI_THERMAL_MAGIC, 5, unsigned long) +#define ACPI_THERMAL_GET_ART _IOR(ACPI_THERMAL_MAGIC, 6, unsigned long) + +struct art { + acpi_handle source; + acpi_handle target; + u64 weight; + u64 ac0_max; + u64 ac1_max; + u64 ac2_max; + u64 ac3_max; + u64 ac4_max; + u64 ac5_max; + u64 ac6_max; + u64 ac7_max; + u64 ac8_max; + u64 ac9_max; +} __packed; + +struct trt { + acpi_handle source; + acpi_handle target; + u64 influence; + u64 sample_period; + u64 reverved1; + u64 reverved2; + u64 reverved3; + u64 reverved4; +} __packed; + +#define ACPI_NR_ART_ELEMENTS 13 +/* for usrspace */ +union art_object { + struct { + char source_device[8]; /* ACPI single name */ + char target_device[8]; /* ACPI single name */ + u64 weight; + u64 ac0_max_level; + u64 ac1_max_level; + u64 ac2_max_level; + u64 ac3_max_level; + u64 ac4_max_level; + u64 ac5_max_level; + u64 ac6_max_level; + u64 ac7_max_level; + u64 ac8_max_level; + u64 ac9_max_level; + }; + u64 __data[ACPI_NR_ART_ELEMENTS]; +}; + +union trt_object { + struct { + char source_device[8]; /* ACPI single name */ + char target_device[8]; /* ACPI single name */ + u64 influence; + u64 sample_period; + u64 reserved[4]; + }; + u64 __data[8]; +}; + +#ifdef __KERNEL__ +int acpi_thermal_rel_misc_device_add(acpi_handle handle); +int acpi_thermal_rel_misc_device_remove(acpi_handle handle); +int acpi_parse_art(acpi_handle handle, int *art_count, struct art **arts, + bool create_dev); +int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trts, + bool create_dev); +#endif + +#endif /* __ACPI_ACPI_THERMAL_H */ diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c new file mode 100644 index 000000000000..edc1cce117ba --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -0,0 +1,271 @@ +/* + * INT3400 thermal driver + * + * Copyright (C) 2014, Intel Corporation + * Authors: Zhang Rui <rui.zhang@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/thermal.h> +#include "acpi_thermal_rel.h" + +enum int3400_thermal_uuid { + INT3400_THERMAL_PASSIVE_1, + INT3400_THERMAL_PASSIVE_2, + INT3400_THERMAL_ACTIVE, + INT3400_THERMAL_CRITICAL, + INT3400_THERMAL_COOLING_MODE, + INT3400_THERMAL_MAXIMUM_UUID, +}; + +static u8 *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = { + "42A441D6-AE6A-462b-A84B-4A8CE79027D3", + "9E04115A-AE87-4D1C-9500-0F3E340BFE75", + "3A95C389-E4B8-4629-A526-C52C88626BAE", + "97C68AE7-15FA-499c-B8C9-5DA81D606E0A", + "16CAF1B7-DD38-40ed-B1C1-1B8A1913D531", +}; + +struct int3400_thermal_priv { + struct acpi_device *adev; + struct thermal_zone_device *thermal; + int mode; + int art_count; + struct art *arts; + int trt_count; + struct trt *trts; + u8 uuid_bitmap; + int rel_misc_dev_res; +}; + +static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv) +{ + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obja, *objb; + int i, j; + int result = 0; + acpi_status status; + + status = acpi_evaluate_object(priv->adev->handle, "IDSP", NULL, &buf); + if (ACPI_FAILURE(status)) + return -ENODEV; + + obja = (union acpi_object *)buf.pointer; + if (obja->type != ACPI_TYPE_PACKAGE) { + result = -EINVAL; + goto end; + } + + for (i = 0; i < obja->package.count; i++) { + objb = &obja->package.elements[i]; + if (objb->type != ACPI_TYPE_BUFFER) { + result = -EINVAL; + goto end; + } + + /* UUID must be 16 bytes */ + if (objb->buffer.length != 16) { + result = -EINVAL; + goto end; + } + + for (j = 0; j < INT3400_THERMAL_MAXIMUM_UUID; j++) { + u8 uuid[16]; + + acpi_str_to_uuid(int3400_thermal_uuids[j], uuid); + if (!strncmp(uuid, objb->buffer.pointer, 16)) { + priv->uuid_bitmap |= (1 << j); + break; + } + } + } + +end: + kfree(buf.pointer); + return result; +} + +static int int3400_thermal_run_osc(acpi_handle handle, + enum int3400_thermal_uuid uuid, bool enable) +{ + u32 ret, buf[2]; + acpi_status status; + int result = 0; + struct acpi_osc_context context = { + .uuid_str = int3400_thermal_uuids[uuid], + .rev = 1, + .cap.length = 8, + }; + + buf[OSC_QUERY_DWORD] = 0; + buf[OSC_SUPPORT_DWORD] = enable; + + context.cap.pointer = buf; + + status = acpi_run_osc(handle, &context); + if (ACPI_SUCCESS(status)) { + ret = *((u32 *)(context.ret.pointer + 4)); + if (ret != enable) + result = -EPERM; + } else + result = -EPERM; + + kfree(context.ret.pointer); + return result; +} + +static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + *temp = 20 * 1000; /* faked temp sensor with 20C */ + return 0; +} + +static int int3400_thermal_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + struct int3400_thermal_priv *priv = thermal->devdata; + + if (!priv) + return -EINVAL; + + *mode = priv->mode; + + return 0; +} + +static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + struct int3400_thermal_priv *priv = thermal->devdata; + bool enable; + int result = 0; + + if (!priv) + return -EINVAL; + + if (mode == THERMAL_DEVICE_ENABLED) + enable = true; + else if (mode == THERMAL_DEVICE_DISABLED) + enable = false; + else + return -EINVAL; + + if (enable != priv->mode) { + priv->mode = enable; + /* currently, only PASSIVE COOLING is supported */ + result = int3400_thermal_run_osc(priv->adev->handle, + INT3400_THERMAL_PASSIVE_1, enable); + } + return result; +} + +static struct thermal_zone_device_ops int3400_thermal_ops = { + .get_temp = int3400_thermal_get_temp, +}; + +static struct thermal_zone_params int3400_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static int int3400_thermal_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3400_thermal_priv *priv; + int result; + + if (!adev) + return -ENODEV; + + priv = kzalloc(sizeof(struct int3400_thermal_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->adev = adev; + + result = int3400_thermal_get_uuids(priv); + if (result) + goto free_priv; + + result = acpi_parse_art(priv->adev->handle, &priv->art_count, + &priv->arts, true); + if (result) + goto free_priv; + + + result = acpi_parse_trt(priv->adev->handle, &priv->trt_count, + &priv->trts, true); + if (result) + goto free_art; + + platform_set_drvdata(pdev, priv); + + if (priv->uuid_bitmap & 1 << INT3400_THERMAL_PASSIVE_1) { + int3400_thermal_ops.get_mode = int3400_thermal_get_mode; + int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + } + priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0, + priv, &int3400_thermal_ops, + &int3400_thermal_params, 0, 0); + if (IS_ERR(priv->thermal)) { + result = PTR_ERR(priv->thermal); + goto free_trt; + } + + priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add( + priv->adev->handle); + + return 0; +free_trt: + kfree(priv->trts); +free_art: + kfree(priv->arts); +free_priv: + kfree(priv); + return result; +} + +static int int3400_thermal_remove(struct platform_device *pdev) +{ + struct int3400_thermal_priv *priv = platform_get_drvdata(pdev); + + if (!priv->rel_misc_dev_res) + acpi_thermal_rel_misc_device_remove(priv->adev->handle); + + thermal_zone_device_unregister(priv->thermal); + kfree(priv->trts); + kfree(priv->arts); + kfree(priv); + return 0; +} + +static const struct acpi_device_id int3400_thermal_match[] = { + {"INT3400", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, int3400_thermal_match); + +static struct platform_driver int3400_thermal_driver = { + .probe = int3400_thermal_probe, + .remove = int3400_thermal_remove, + .driver = { + .name = "int3400 thermal", + .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(int3400_thermal_match), + }, +}; + +module_platform_driver(int3400_thermal_driver); + +MODULE_DESCRIPTION("INT3400 Thermal driver"); +MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c new file mode 100644 index 000000000000..a5d08c14ba24 --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3402_thermal.c @@ -0,0 +1,242 @@ +/* + * INT3402 thermal driver for memory temperature reporting + * + * Copyright (C) 2014, Intel Corporation + * Authors: Aaron Lu <aaron.lu@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/thermal.h> + +#define ACPI_ACTIVE_COOLING_MAX_NR 10 + +struct active_trip { + unsigned long temp; + int id; + bool valid; +}; + +struct int3402_thermal_data { + unsigned long *aux_trips; + int aux_trip_nr; + unsigned long psv_temp; + int psv_trip_id; + unsigned long crt_temp; + int crt_trip_id; + unsigned long hot_temp; + int hot_trip_id; + struct active_trip act_trips[ACPI_ACTIVE_COOLING_MAX_NR]; + acpi_handle *handle; +}; + +static int int3402_thermal_get_zone_temp(struct thermal_zone_device *zone, + unsigned long *temp) +{ + struct int3402_thermal_data *d = zone->devdata; + unsigned long long tmp; + acpi_status status; + + status = acpi_evaluate_integer(d->handle, "_TMP", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -ENODEV; + + /* _TMP returns the temperature in tenths of degrees Kelvin */ + *temp = DECI_KELVIN_TO_MILLICELSIUS(tmp); + + return 0; +} + +static int int3402_thermal_get_trip_temp(struct thermal_zone_device *zone, + int trip, unsigned long *temp) +{ + struct int3402_thermal_data *d = zone->devdata; + int i; + + if (trip < d->aux_trip_nr) + *temp = d->aux_trips[trip]; + else if (trip == d->crt_trip_id) + *temp = d->crt_temp; + else if (trip == d->psv_trip_id) + *temp = d->psv_temp; + else if (trip == d->hot_trip_id) + *temp = d->hot_temp; + else { + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + if (d->act_trips[i].valid && + d->act_trips[i].id == trip) { + *temp = d->act_trips[i].temp; + break; + } + } + if (i == ACPI_ACTIVE_COOLING_MAX_NR) + return -EINVAL; + } + return 0; +} + +static int int3402_thermal_get_trip_type(struct thermal_zone_device *zone, + int trip, enum thermal_trip_type *type) +{ + struct int3402_thermal_data *d = zone->devdata; + int i; + + if (trip < d->aux_trip_nr) + *type = THERMAL_TRIP_PASSIVE; + else if (trip == d->crt_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else if (trip == d->hot_trip_id) + *type = THERMAL_TRIP_HOT; + else if (trip == d->psv_trip_id) + *type = THERMAL_TRIP_PASSIVE; + else { + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + if (d->act_trips[i].valid && + d->act_trips[i].id == trip) { + *type = THERMAL_TRIP_ACTIVE; + break; + } + } + if (i == ACPI_ACTIVE_COOLING_MAX_NR) + return -EINVAL; + } + return 0; +} + +static int int3402_thermal_set_trip_temp(struct thermal_zone_device *zone, int trip, + unsigned long temp) +{ + struct int3402_thermal_data *d = zone->devdata; + acpi_status status; + char name[10]; + + snprintf(name, sizeof(name), "PAT%d", trip); + status = acpi_execute_simple_method(d->handle, name, + MILLICELSIUS_TO_DECI_KELVIN(temp)); + if (ACPI_FAILURE(status)) + return -EIO; + + d->aux_trips[trip] = temp; + return 0; +} + +static struct thermal_zone_device_ops int3402_thermal_zone_ops = { + .get_temp = int3402_thermal_get_zone_temp, + .get_trip_temp = int3402_thermal_get_trip_temp, + .get_trip_type = int3402_thermal_get_trip_type, + .set_trip_temp = int3402_thermal_set_trip_temp, +}; + +static struct thermal_zone_params int3402_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static int int3402_thermal_get_temp(acpi_handle handle, char *name, + unsigned long *temp) +{ + unsigned long long r; + acpi_status status; + + status = acpi_evaluate_integer(handle, name, NULL, &r); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLICELSIUS(r); + return 0; +} + +static int int3402_thermal_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3402_thermal_data *d; + struct thermal_zone_device *zone; + acpi_status status; + unsigned long long trip_cnt; + int trip_mask = 0, i; + + if (!acpi_has_method(adev->handle, "_TMP")) + return -ENODEV; + + d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL); + if (!d) + return -ENOMEM; + + status = acpi_evaluate_integer(adev->handle, "PATC", NULL, &trip_cnt); + if (ACPI_FAILURE(status)) + trip_cnt = 0; + else { + d->aux_trips = devm_kzalloc(&pdev->dev, + sizeof(*d->aux_trips) * trip_cnt, GFP_KERNEL); + if (!d->aux_trips) + return -ENOMEM; + trip_mask = trip_cnt - 1; + d->handle = adev->handle; + d->aux_trip_nr = trip_cnt; + } + + d->crt_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_CRT", &d->crt_temp)) + d->crt_trip_id = trip_cnt++; + d->hot_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_HOT", &d->hot_temp)) + d->hot_trip_id = trip_cnt++; + d->psv_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_PSV", &d->psv_temp)) + d->psv_trip_id = trip_cnt++; + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + char name[5] = { '_', 'A', 'C', '0' + i, '\0' }; + if (int3402_thermal_get_temp(adev->handle, name, + &d->act_trips[i].temp)) + break; + d->act_trips[i].id = trip_cnt++; + d->act_trips[i].valid = true; + } + + zone = thermal_zone_device_register(acpi_device_bid(adev), trip_cnt, + trip_mask, d, + &int3402_thermal_zone_ops, + &int3402_thermal_params, + 0, 0); + if (IS_ERR(zone)) + return PTR_ERR(zone); + platform_set_drvdata(pdev, zone); + + return 0; +} + +static int int3402_thermal_remove(struct platform_device *pdev) +{ + struct thermal_zone_device *zone = platform_get_drvdata(pdev); + + thermal_zone_device_unregister(zone); + return 0; +} + +static const struct acpi_device_id int3402_thermal_match[] = { + {"INT3402", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, int3402_thermal_match); + +static struct platform_driver int3402_thermal_driver = { + .probe = int3402_thermal_probe, + .remove = int3402_thermal_remove, + .driver = { + .name = "int3402 thermal", + .owner = THIS_MODULE, + .acpi_match_table = int3402_thermal_match, + }, +}; + +module_platform_driver(int3402_thermal_driver); + +MODULE_DESCRIPTION("INT3402 Thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c new file mode 100644 index 000000000000..d20dba986f0f --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -0,0 +1,477 @@ +/* + * ACPI INT3403 thermal driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/thermal.h> +#include <linux/platform_device.h> + +#define INT3403_TYPE_SENSOR 0x03 +#define INT3403_TYPE_CHARGER 0x0B +#define INT3403_TYPE_BATTERY 0x0C +#define INT3403_PERF_CHANGED_EVENT 0x80 +#define INT3403_THERMAL_EVENT 0x90 + +#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100) +#define KELVIN_OFFSET 2732 +#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off)) + +struct int3403_sensor { + struct thermal_zone_device *tzone; + unsigned long *thresholds; + unsigned long crit_temp; + int crit_trip_id; + unsigned long psv_temp; + int psv_trip_id; + +}; + +struct int3403_performance_state { + u64 performance; + u64 power; + u64 latency; + u64 linear; + u64 control; + u64 raw_performace; + char *raw_unit; + int reserved; +}; + +struct int3403_cdev { + struct thermal_cooling_device *cdev; + unsigned long max_state; +}; + +struct int3403_priv { + struct platform_device *pdev; + struct acpi_device *adev; + unsigned long long type; + void *priv; +}; + +static int sys_get_curr_temp(struct thermal_zone_device *tzone, + unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + unsigned long long tmp; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_hyst(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + unsigned long long hyst; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_temp(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct int3403_sensor *obj = priv->priv; + + if (priv->type != INT3403_TYPE_SENSOR || !obj) + return -EINVAL; + + if (trip == obj->crit_trip_id) + *temp = obj->crit_temp; + else if (trip == obj->psv_trip_id) + *temp = obj->psv_temp; + else { + /* + * get_trip_temp is a mandatory callback but + * PATx method doesn't return any value, so return + * cached value, which was last set from user space + */ + *temp = obj->thresholds[trip]; + } + + return 0; +} + +static int sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + struct int3403_priv *priv = thermal->devdata; + struct int3403_sensor *obj = priv->priv; + + /* Mandatory callback, may not mean much here */ + if (trip == obj->crit_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else + *type = THERMAL_TRIP_PASSIVE; + + return 0; +} + +int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip, + unsigned long temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + struct int3403_sensor *obj = priv->priv; + acpi_status status; + char name[10]; + int ret = 0; + + snprintf(name, sizeof(name), "PAT%d", trip); + if (acpi_has_method(device->handle, name)) { + status = acpi_execute_simple_method(device->handle, name, + MILLI_CELSIUS_TO_DECI_KELVIN(temp, + KELVIN_OFFSET)); + if (ACPI_FAILURE(status)) + ret = -EIO; + else + obj->thresholds[trip] = temp; + } else { + ret = -EIO; + dev_err(&device->dev, "sys_set_trip_temp: method not found\n"); + } + + return ret; +} + +static struct thermal_zone_device_ops tzone_ops = { + .get_temp = sys_get_curr_temp, + .get_trip_temp = sys_get_trip_temp, + .get_trip_type = sys_get_trip_type, + .set_trip_temp = sys_set_trip_temp, + .get_trip_hyst = sys_get_trip_hyst, +}; + +static struct thermal_zone_params int3403_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static void int3403_notify(acpi_handle handle, + u32 event, void *data) +{ + struct int3403_priv *priv = data; + struct int3403_sensor *obj; + + if (!priv) + return; + + obj = priv->priv; + if (priv->type != INT3403_TYPE_SENSOR || !obj) + return; + + switch (event) { + case INT3403_PERF_CHANGED_EVENT: + break; + case INT3403_THERMAL_EVENT: + thermal_zone_device_update(obj->tzone); + break; + default: + dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event); + break; + } +} + +static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long crt; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long psv; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); + + return 0; +} + +static int int3403_sensor_add(struct int3403_priv *priv) +{ + int result = 0; + acpi_status status; + struct int3403_sensor *obj; + unsigned long long trip_cnt; + int trip_mask = 0; + + obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + + priv->priv = obj; + + status = acpi_evaluate_integer(priv->adev->handle, "PATC", NULL, + &trip_cnt); + if (ACPI_FAILURE(status)) + trip_cnt = 0; + + if (trip_cnt) { + /* We have to cache, thresholds can't be readback */ + obj->thresholds = devm_kzalloc(&priv->pdev->dev, + sizeof(*obj->thresholds) * trip_cnt, + GFP_KERNEL); + if (!obj->thresholds) { + result = -ENOMEM; + goto err_free_obj; + } + trip_mask = BIT(trip_cnt) - 1; + } + + obj->psv_trip_id = -1; + if (!sys_get_trip_psv(priv->adev, &obj->psv_temp)) + obj->psv_trip_id = trip_cnt++; + + obj->crit_trip_id = -1; + if (!sys_get_trip_crt(priv->adev, &obj->crit_temp)) + obj->crit_trip_id = trip_cnt++; + + obj->tzone = thermal_zone_device_register(acpi_device_bid(priv->adev), + trip_cnt, trip_mask, priv, &tzone_ops, + &int3403_thermal_params, 0, 0); + if (IS_ERR(obj->tzone)) { + result = PTR_ERR(obj->tzone); + obj->tzone = NULL; + goto err_free_obj; + } + + result = acpi_install_notify_handler(priv->adev->handle, + ACPI_DEVICE_NOTIFY, int3403_notify, + (void *)priv); + if (result) + goto err_free_obj; + + return 0; + + err_free_obj: + if (obj->tzone) + thermal_zone_device_unregister(obj->tzone); + return result; +} + +static int int3403_sensor_remove(struct int3403_priv *priv) +{ + struct int3403_sensor *obj = priv->priv; + + thermal_zone_device_unregister(obj->tzone); + return 0; +} + +/* INT3403 Cooling devices */ +static int int3403_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct int3403_priv *priv = cdev->devdata; + struct int3403_cdev *obj = priv->priv; + + *state = obj->max_state; + return 0; +} + +static int int3403_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct int3403_priv *priv = cdev->devdata; + unsigned long long level; + acpi_status status; + + status = acpi_evaluate_integer(priv->adev->handle, "PPPC", NULL, &level); + if (ACPI_SUCCESS(status)) { + *state = level; + return 0; + } else + return -EINVAL; +} + +static int +int3403_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) +{ + struct int3403_priv *priv = cdev->devdata; + acpi_status status; + + status = acpi_execute_simple_method(priv->adev->handle, "SPPC", state); + if (ACPI_SUCCESS(status)) + return 0; + else + return -EINVAL; +} + +static const struct thermal_cooling_device_ops int3403_cooling_ops = { + .get_max_state = int3403_get_max_state, + .get_cur_state = int3403_get_cur_state, + .set_cur_state = int3403_set_cur_state, +}; + +static int int3403_cdev_add(struct int3403_priv *priv) +{ + int result = 0; + acpi_status status; + struct int3403_cdev *obj; + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *p; + + obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + + status = acpi_evaluate_object(priv->adev->handle, "PPSS", NULL, &buf); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buf.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + printk(KERN_WARNING "Invalid PPSS data\n"); + return -EFAULT; + } + + obj->max_state = p->package.count - 1; + obj->cdev = + thermal_cooling_device_register(acpi_device_bid(priv->adev), + priv, &int3403_cooling_ops); + if (IS_ERR(obj->cdev)) + result = PTR_ERR(obj->cdev); + + priv->priv = obj; + + /* TODO: add ACPI notification support */ + + return result; +} + +static int int3403_cdev_remove(struct int3403_priv *priv) +{ + struct int3403_cdev *obj = priv->priv; + + thermal_cooling_device_unregister(obj->cdev); + return 0; +} + +static int int3403_add(struct platform_device *pdev) +{ + struct int3403_priv *priv; + int result = 0; + acpi_status status; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdev = pdev; + priv->adev = ACPI_COMPANION(&(pdev->dev)); + if (!priv->adev) { + result = -EINVAL; + goto err; + } + + status = acpi_evaluate_integer(priv->adev->handle, "PTYP", + NULL, &priv->type); + if (ACPI_FAILURE(status)) { + result = -EINVAL; + goto err; + } + + platform_set_drvdata(pdev, priv); + switch (priv->type) { + case INT3403_TYPE_SENSOR: + result = int3403_sensor_add(priv); + break; + case INT3403_TYPE_CHARGER: + case INT3403_TYPE_BATTERY: + result = int3403_cdev_add(priv); + break; + default: + result = -EINVAL; + } + + if (result) + goto err; + return result; + +err: + return result; +} + +static int int3403_remove(struct platform_device *pdev) +{ + struct int3403_priv *priv = platform_get_drvdata(pdev); + + switch (priv->type) { + case INT3403_TYPE_SENSOR: + int3403_sensor_remove(priv); + break; + case INT3403_TYPE_CHARGER: + case INT3403_TYPE_BATTERY: + int3403_cdev_remove(priv); + break; + default: + break; + } + + return 0; +} + +static const struct acpi_device_id int3403_device_ids[] = { + {"INT3403", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, int3403_device_ids); + +static struct platform_driver int3403_driver = { + .probe = int3403_add, + .remove = int3403_remove, + .driver = { + .name = "int3403 thermal", + .owner = THIS_MODULE, + .acpi_match_table = int3403_device_ids, + }, +}; + +module_platform_driver(int3403_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ACPI INT3403 thermal driver"); diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 4b2b999b7611..f8eb625b8400 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -401,6 +401,10 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, struct of_phandle_args sensor_specs; int ret, id; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + /* For now, thermal framework supports only 1 sensor per zone */ ret = of_parse_phandle_with_args(child, "thermal-sensors", "#thermal-sensor-cells", @@ -771,6 +775,10 @@ int __init of_parse_thermal_zones(void) struct thermal_zone_device *zone; struct thermal_zone_params *tzp; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + tz = thermal_of_build_thermal_zone(child); if (IS_ERR(tz)) { pr_err("failed to build thermal zone %s: %ld\n", @@ -838,6 +846,10 @@ void of_thermal_destroy_zones(void) for_each_child_of_node(np, child) { struct thermal_zone_device *zone; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + zone = thermal_zone_get_zone_by_name(child->name); if (IS_ERR(zone)) continue; diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index f251521baaa2..fdd1f523a1ed 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -23,6 +23,7 @@ */ #include <linux/thermal.h> +#include <trace/events/thermal.h> #include "thermal_core.h" @@ -76,7 +77,7 @@ static unsigned long get_target_state(struct thermal_instance *instance, next_target = instance->upper; break; case THERMAL_TREND_DROPPING: - if (cur_state == instance->lower) { + if (cur_state <= instance->lower) { if (!throttle) next_target = THERMAL_NO_TARGET; } else { @@ -129,8 +130,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) trend = get_tz_trend(tz, trip); - if (tz->temperature >= trip_temp) + if (tz->temperature >= trip_temp) { throttle = true; + trace_thermal_zone_trip(tz, trip, trip_type); + } dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n", trip, trip_type, trip_temp, trend, throttle); diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 1e23f4f8d2c2..9bf10aa6069b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -38,6 +38,9 @@ #include <net/netlink.h> #include <net/genetlink.h> +#define CREATE_TRACE_POINTS +#include <trace/events/thermal.h> + #include "thermal_core.h" #include "thermal_hwmon.h" @@ -368,6 +371,8 @@ static void handle_critical_trips(struct thermal_zone_device *tz, if (tz->temperature < trip_temp) return; + trace_thermal_zone_trip(tz, trip, trip_type); + if (tz->ops->notify) tz->ops->notify(tz, trip, trip_type); @@ -463,6 +468,7 @@ static void update_temperature(struct thermal_zone_device *tz) tz->temperature = temp; mutex_unlock(&tz->lock); + trace_thermal_temperature(tz); dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n", tz->last_temperature, tz->temperature); } @@ -1287,6 +1293,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) mutex_unlock(&cdev->lock); cdev->ops->set_cur_state(cdev, target); cdev->updated = true; + trace_cdev_update(cdev, target); dev_dbg(&cdev->device, "set to state %lu\n", target); } EXPORT_SYMBOL(thermal_cdev_update); @@ -1790,6 +1797,10 @@ static int __init thermal_register_governors(void) if (result) return result; + result = thermal_gov_bang_bang_register(); + if (result) + return result; + return thermal_gov_user_space_register(); } @@ -1797,6 +1808,7 @@ static void thermal_unregister_governors(void) { thermal_gov_step_wise_unregister(); thermal_gov_fair_share_unregister(); + thermal_gov_bang_bang_unregister(); thermal_gov_user_space_unregister(); } diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 3db339fb636f..d15d243de27a 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -69,6 +69,14 @@ static inline int thermal_gov_fair_share_register(void) { return 0; } static inline void thermal_gov_fair_share_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */ +#ifdef CONFIG_THERMAL_GOV_BANG_BANG +int thermal_gov_bang_bang_register(void); +void thermal_gov_bang_bang_unregister(void); +#else +static inline int thermal_gov_bang_bang_register(void) { return 0; } +static inline void thermal_gov_bang_bang_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_BANG_BANG */ + #ifdef CONFIG_THERMAL_GOV_USER_SPACE int thermal_gov_user_space_register(void); void thermal_gov_user_space_unregister(void); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 57ee0528aacb..f34a0835aa4f 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -433,6 +433,7 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_device_fix_up_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); +int acpi_device_update_power(struct acpi_device *device, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); #ifdef CONFIG_PM diff --git a/include/linux/acpi.h b/include/linux/acpi.h index b7926bb9b444..407a12f663eb 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -432,6 +432,7 @@ static inline bool acpi_driver_match_device(struct device *dev, int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); int acpi_device_modalias(struct device *, char *, int); +struct platform_device *acpi_create_platform_device(struct acpi_device *); #define ACPI_PTR(_ptr) (_ptr) #else /* !CONFIG_ACPI */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 0305cde21a74..ef90838b36a0 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -44,6 +44,10 @@ #define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) +#define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100) +#define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732) +#define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off)) +#define MILLICELSIUS_TO_DECI_KELVIN(t) MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, 2732) /* Adding event notification support elements */ #define THERMAL_GENL_FAMILY_NAME "thermal_event" diff --git a/include/trace/events/thermal.h b/include/trace/events/thermal.h new file mode 100644 index 000000000000..0f4f95d63c03 --- /dev/null +++ b/include/trace/events/thermal.h @@ -0,0 +1,83 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM thermal + +#if !defined(_TRACE_THERMAL_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_THERMAL_H + +#include <linux/thermal.h> +#include <linux/tracepoint.h> + +TRACE_EVENT(thermal_temperature, + + TP_PROTO(struct thermal_zone_device *tz), + + TP_ARGS(tz), + + TP_STRUCT__entry( + __string(thermal_zone, tz->type) + __field(int, id) + __field(int, temp_prev) + __field(int, temp) + ), + + TP_fast_assign( + __assign_str(thermal_zone, tz->type); + __entry->id = tz->id; + __entry->temp_prev = tz->last_temperature; + __entry->temp = tz->temperature; + ), + + TP_printk("thermal_zone=%s id=%d temp_prev=%d temp=%d", + __get_str(thermal_zone), __entry->id, __entry->temp_prev, + __entry->temp) +); + +TRACE_EVENT(cdev_update, + + TP_PROTO(struct thermal_cooling_device *cdev, unsigned long target), + + TP_ARGS(cdev, target), + + TP_STRUCT__entry( + __string(type, cdev->type) + __field(unsigned long, target) + ), + + TP_fast_assign( + __assign_str(type, cdev->type); + __entry->target = target; + ), + + TP_printk("type=%s target=%lu", __get_str(type), __entry->target) +); + +TRACE_EVENT(thermal_zone_trip, + + TP_PROTO(struct thermal_zone_device *tz, int trip, + enum thermal_trip_type trip_type), + + TP_ARGS(tz, trip, trip_type), + + TP_STRUCT__entry( + __string(thermal_zone, tz->type) + __field(int, id) + __field(int, trip) + __field(enum thermal_trip_type, trip_type) + ), + + TP_fast_assign( + __assign_str(thermal_zone, tz->type); + __entry->id = tz->id; + __entry->trip = trip; + __entry->trip_type = trip_type; + ), + + TP_printk("thermal_zone=%s id=%d trip=%d trip_type=%d", + __get_str(thermal_zone), __entry->id, __entry->trip, + __entry->trip_type) +); + +#endif /* _TRACE_THERMAL_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> |