diff options
32 files changed, 532 insertions, 348 deletions
diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 69b7f8e77596..689cd27ac890 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int endp; int len; int rc; @@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } + endp = usb_pipeendpoint(sc->last_pipe); + if (usb_pipein(sc->last_pipe)) + endp |= USB_DIR_IN; + if (cmd->state == UB_CMDST_CLEAR) { if (urb->status == -EPIPE) { /* @@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_sense(sc, cmd); @@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat(sc, cmd); @@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat_counted(sc, cmd); @@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) del_timer_sync(&timer); usb_kill_urb(&sc->work_urb); - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); return 0; } diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index ec3c0e507669..2b3a055059ea 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb) if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) { /* Special case handling for pipe reset */ le16_to_cpus(&ctrl_msg->dr.wIndex); - - /* toggle is reset on clear */ - usb_settoggle(adapter->usb_dev, - ctrl_msg->dr.wIndex & ~USB_DIR_IN, - (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0, - 0); - - + usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex); } if (ctrl_msg->complete) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index d9d974a8f52a..add3395d3248 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) return ret; } - usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0); usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); pipe = usb_sndctrlpipe(hdw->usb_dev, 0); diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3771d6e6d0cc..34e6108e1d42 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -652,7 +652,7 @@ next_desc: iface = &intf->altsetting[0]; ep = &iface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(ep)) { + if (!ep || !usb_endpoint_is_int_in(ep)) { rv = -EINVAL; goto err; } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index df3c539f652a..308609039c73 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; - usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0); + usb_reset_endpoint(ps->dev, ep); return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 81fa8506825d..42b93da1085d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index f750eb1ab595..e7d4479de41c 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -206,6 +206,11 @@ struct hc_driver { void (*endpoint_disable)(struct usb_hcd *hcd, struct usb_host_endpoint *ep); + /* (optional) reset any endpoint state such as sequence number + and current window */ + void (*endpoint_reset)(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + /* root hub support */ int (*hub_status_data) (struct usb_hcd *hcd, char *buf); int (*hub_control) (struct usb_hcd *hcd, @@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); @@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) + /* -------------------------------------------------------------------------- */ /* Enumeration is only for the hub driver, or HCD virtual root hubs */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690f3683..b62628377654 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * the copy in usb-storage, for as long as we need two copies. */ - /* toggle was reset by the clear */ - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); + usb_reset_endpoint(dev, endp); return 0; } @@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, } /** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + +/** * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor @@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); } - dev->toggle[0] = dev->toggle[1] = 0; /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * usb_enable_endpoint - Enable an endpoint for USB communications * @dev: the device whose interface is being enabled * @ep: the endpoint - * @reset_toggle: flag to set the endpoint's toggle back to 0 + * @reset_ep: flag to reset the endpoint state * - * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers. + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. * For control endpoints, both the input and output sides are handled. */ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, - bool reset_toggle) + bool reset_ep) { int epnum = usb_endpoint_num(&ep->desc); int is_out = usb_endpoint_dir_out(&ep->desc); int is_control = usb_endpoint_xfer_control(&ep->desc); - if (is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 1, 0); + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) dev->ep_out[epnum] = ep; - } - if (!is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 0, 0); + if (!is_out || is_control) dev->ep_in[epnum] = ep; - } ep->enabled = 1; } @@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, * usb_enable_interface - Enable all the endpoints for an interface * @dev: the device whose interface is being enabled * @intf: pointer to the interface descriptor - * @reset_toggles: flag to set the endpoints' toggles back to 0 + * @reset_eps: flag to reset the endpoints' state * * Enables all the endpoints for the interface's current altsetting. */ void usb_enable_interface(struct usb_device *dev, - struct usb_interface *intf, bool reset_toggles) + struct usb_interface *intf, bool reset_eps) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) - usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles); + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); } /** @@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * This issues a standard SET_CONFIGURATION request to the device using * the current configuration. The effect is to reset most USB-related * state in the device, including interface altsettings (reset to zero), - * endpoint halts (cleared), and data toggle (only for bulk and interrupt + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt * endpoints). Other usbcore state is unchanged, including bindings of * usb device drivers to interfaces. * @@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * (multi-interface) devices. Instead, the driver for each interface may * use usb_set_interface() on the interfaces it claims. Be careful though; * some devices don't support the SET_INTERFACE request, and others won't - * reset all the interface state (notably data toggles). Resetting the whole + * reset all the interface state (notably endpoint state). Resetting the whole * configuration would affect other drivers' interfaces. * * The caller must own the device lock. @@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev) if (retval < 0) return retval; - dev->toggle[0] = dev->toggle[1] = 0; - /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dcfc072630c1..7eee400d3e32 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; /* ep0 maxpacket comes later, from device descriptor */ - usb_enable_endpoint(dev, &dev->ep0, true); + usb_enable_endpoint(dev, &dev->ep0, false); dev->can_submit = 1; /* Save readable and stable topology id, distinguishing devices diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 96d65ca06ecd..4007770f7ed2 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); } -static u32 eth_get_link(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - return dev->gadget->speed != USB_SPEED_UNKNOWN; -} - /* REVISIT can also support: * - WOL (by tracking suspends and issuing remote wakeup) * - msglevel (implies updated messaging) @@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net) static struct ethtool_ops ops = { .get_drvinfo = eth_get_drvinfo, - .get_link = eth_get_link + .get_link = ethtool_op_get_link, }; static void defer_kevent(struct eth_dev *dev, int flag) diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 958751ccea43..c2050785a819 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -254,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) asl_qset_insert_begin(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->async_work); - return 0; + return err; } /** diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1569afd6245b..e019a5058ab8 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd, } } +static void whc_endpoint_reset(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + qset->remove = 1; + + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + queue_work(whc->workqueue, &whc->async_work); + else + queue_work(whc->workqueue, &whc->periodic_work); + + qset_reset(whc, qset); + } +} + + static struct hc_driver whc_hc_driver = { .description = "whci-hcd", .product_desc = "Wireless host controller", @@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = { .urb_enqueue = whc_urb_enqueue, .urb_dequeue = whc_urb_dequeue, .endpoint_disable = whc_endpoint_disable, + .endpoint_reset = whc_endpoint_reset, .hub_status_data = wusbhc_rh_status_data, .hub_control = wusbhc_rh_control, diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index df8b85f07092..ff4ef9e910d9 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -282,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) qset_insert_in_sw_list(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->periodic_work); - return 0; + return err; } /** @@ -353,7 +360,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) qset_delete(whc, qset); } - /** * pzl_init - initialize the periodic zone list * @whc: the WHCI host controller diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 7be74314ee12..640b38fbd051 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) QH_INFO3_TX_RATE_53_3 | QH_INFO3_TX_PWR(0) /* 0 == max power */ ); + + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); } /** * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule + * schedule. + * + * The sequence number and current window are not cleared (see + * qset_reset()). */ void qset_clear(struct whc *whc, struct whc_qset *qset) { @@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) qset->remove = 0; qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); qset->qh.scratch[0] = 0; qset->qh.scratch[1] = 0; qset->qh.scratch[2] = 0; @@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) } /** + * qset_reset - reset endpoint state in a qset. + * + * Clears the sequence number and current window. This qset must not + * be in the ASL or PZL. + */ +void qset_reset(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + + qset->qh.status &= ~QH_STATUS_SEQ_MASK; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); +} + +/** * get_qset - get the qset for an async endpoint * * A new qset is created if one does not already exist. diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index d3543a181dc9..24e94d983c5e 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset); struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); void qset_delete(struct whc *whc, struct whc_qset *qset); void qset_clear(struct whc *whc, struct whc_qset *qset); +void qset_reset(struct whc *whc, struct whc_qset *qset); int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, gfp_t mem_flags); void qset_free_std(struct whc *whc, struct whc_std *std); diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index 51df7e313b38..794dba0d0f0a 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -185,6 +185,7 @@ struct whc_qhead { #define QH_STATUS_FLOW_CTRL (1 << 15) #define QH_STATUS_ICUR(i) ((i) << 5) #define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) +#define QH_STATUS_SEQ_MASK 0x1f /** * usb_pipe_to_qh_type - USB core pipe type to QH transfer type diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 569ef0fed0f6..1976e9b41800 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * trigger the "send a ZLP?" confusion. */ rndis = (maxpacket & 0x3f) == 0 + && length > maxpacket && length < 0xffff && (length % maxpacket) != 0; @@ -1228,27 +1229,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx) hw_ep = tx_ch->hw_ep; - /* Peripheral role never repurposes the - * endpoint, so immediate completion is - * safe. Host role waits for the fifo - * to empty (TXPKTRDY irq) before going - * to the next queued bulk transfer. - */ - if (is_host_active(cppi->musb)) { -#if 0 - /* WORKAROUND because we may - * not always get TXKPTRDY ... - */ - int csr; - - csr = musb_readw(hw_ep->regs, - MUSB_TXCSR); - if (csr & MUSB_TXCSR_TXPKTRDY) -#endif - completed = false; - } - if (completed) - musb_dma_completion(musb, index + 1, 1); + musb_dma_completion(musb, index + 1, 1); } else { /* Bigger transfer than we could fit in diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 338cd1611ab3..0112353ec97d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message) return 0; } -static int musb_resume(struct platform_device *pdev) +static int musb_resume_early(struct platform_device *pdev) { - unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); if (!musb->clock) return 0; - spin_lock_irqsave(&musb->lock, flags); - if (musb->set_clock) musb->set_clock(musb->clock, 1); else clk_enable(musb->clock); /* for static cmos like DaVinci, register values were preserved - * unless for some reason the whole soc powered down and we're - * not treating that as a whole-system restart (e.g. swsusp) + * unless for some reason the whole soc powered down or the USB + * module got reset through the PSC (vs just being disabled). */ - spin_unlock_irqrestore(&musb->lock, flags); return 0; } @@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = { .remove = __devexit_p(musb_remove), .shutdown = musb_shutdown, .suspend = musb_suspend, - .resume = musb_resume, + .resume_early = musb_resume_early, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c7ebd0867fcc..f79440cdfe7e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status) if (is_dma_capable() && ep->dma) { struct dma_controller *c = ep->musb->dma_controller; int value; + if (ep->is_in) { + /* + * The programming guide says that we must not clear + * the DMAMODE bit before DMAENAB, so we only + * clear it in the second write... + */ musb_writew(epio, MUSB_TXCSR, - 0 | MUSB_TXCSR_FLUSHFIFO); + MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); musb_writew(epio, MUSB_TXCSR, 0 | MUSB_TXCSR_FLUSHFIFO); } else { @@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) | IN token(s) are recd from Host. | -> DMA interrupt on completion | calls TxAvail. - | -> stop DMA, ~DmaEenab, + | -> stop DMA, ~DMAENAB, | -> set TxPktRdy for last short pkt or zlp | -> Complete Request | -> Continue next request (call txstate) @@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req) request->dma, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { - /* ASSERT: DMAENAB is clear */ - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAMODE); + /* + * We must not clear the DMAMODE bit + * before the DMAENAB bit -- and the + * latter doesn't always get cleared + * before we get here... + */ + csr &= ~(MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr + | MUSB_TXCSR_P_WZC_BITS); + csr &= ~MUSB_TXCSR_DMAMODE; csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_MODE); /* against programming guide */ @@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req) #elif defined(CONFIG_USB_TI_CPPI_DMA) /* program endpoint CSR first, then setup DMA */ - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_P_UNDERRUN - | MUSB_TXCSR_TXPKTRDY); + csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) @@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req) if (!use_dma) { c->channel_release(musb_ep->dma); musb_ep->dma = NULL; - /* ASSERT: DMAENAB clear */ - csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); /* invariant: prequest->buf is non-null */ } #elif defined(CONFIG_USB_TUSB_OMAP_DMA) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 499c431a6d62..db1b57415ec7 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -96,8 +97,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int nOut, - u8 *buf, u32 len); + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len); /* * Clear TX fifo. Needed to avoid BABBLE errors. @@ -125,6 +126,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) } } +static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep) +{ + void __iomem *epio = ep->regs; + u16 csr; + int retries = 5; + + /* scrub any data left in the fifo */ + do { + csr = musb_readw(epio, MUSB_TXCSR); + if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY))) + break; + musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO); + csr = musb_readw(epio, MUSB_TXCSR); + udelay(10); + } while (--retries); + + WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n", + ep->epnum, csr); + + /* and reset for the next transfer */ + musb_writew(epio, MUSB_TXCSR, 0); +} + /* * Start transmit. Caller is responsible for locking shared resources. * musb must be locked. @@ -145,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep) } -static inline void cppi_host_txdma_start(struct musb_hw_ep *ep) +static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep) { u16 txcsr; /* NOTE: no locks here; caller should lock and select EP */ txcsr = musb_readw(ep->regs, MUSB_TXCSR); txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS; + if (is_cppi_enabled()) + txcsr |= MUSB_TXCSR_DMAMODE; musb_writew(ep->regs, MUSB_TXCSR, txcsr); } @@ -166,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) { u16 frame; u32 len; - void *buf; void __iomem *mbase = musb->mregs; struct urb *urb = next_urb(qh); + void *buf = urb->transfer_buffer; + u32 offset = 0; struct musb_hw_ep *hw_ep = qh->hw_ep; unsigned pipe = urb->pipe; u8 address = usb_pipedevice(pipe); @@ -191,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: qh->iso_idx = 0; qh->frame = 0; - buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset; + offset = urb->iso_frame_desc[0].offset; len = urb->iso_frame_desc[0].length; break; default: /* bulk, interrupt */ @@ -209,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; }; s; }), - epnum, buf, len); + epnum, buf + offset, len); /* Configure endpoint */ if (is_in || hw_ep->is_shared_fifo) hw_ep->in_qh = qh; else hw_ep->out_qh = qh; - musb_ep_program(musb, epnum, urb, !is_in, buf, len); + musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); /* transmit may have more work: start it when it is time */ if (is_in) @@ -227,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: DBG(3, "check whether there's still time for periodic Tx\n"); - qh->iso_idx = 0; frame = musb_readw(mbase, MUSB_FRAME); /* FIXME this doesn't implement that scheduling policy ... * or handle framecounter wrapping @@ -256,7 +282,7 @@ start: if (!hw_ep->tx_channel) musb_h_tx_start(hw_ep); else if (is_cppi_enabled() || tusb_dma_omap()) - cppi_host_txdma_start(hw_ep); + musb_h_tx_dma_start(hw_ep); } } @@ -567,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) csr = musb_readw(ep->regs, MUSB_TXCSR); if (csr & MUSB_TXCSR_MODE) { musb_h_tx_flush_fifo(ep); + csr = musb_readw(ep->regs, MUSB_TXCSR); musb_writew(ep->regs, MUSB_TXCSR, - MUSB_TXCSR_FRCDATATOG); + csr | MUSB_TXCSR_FRCDATATOG); } - /* clear mode (and everything else) to enable Rx */ + + /* + * Clear the MODE bit (and everything else) to enable Rx. + * NOTE: we mustn't clear the DMAMODE bit before DMAENAB. + */ + if (csr & MUSB_TXCSR_DMAMODE) + musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ @@ -601,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) ep->rx_reinit = 0; } +static bool musb_tx_dma_program(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, struct musb_qh *qh, + struct urb *urb, u32 offset, u32 length) +{ + struct dma_channel *channel = hw_ep->tx_channel; + void __iomem *epio = hw_ep->regs; + u16 pkt_size = qh->maxpacket; + u16 csr; + u8 mode; + +#ifdef CONFIG_USB_INVENTRA_DMA + if (length > channel->max_len) + length = channel->max_len; + + csr = musb_readw(epio, MUSB_TXCSR); + if (length > pkt_size) { + mode = 1; + csr |= MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_DMAENAB; + } else { + mode = 0; + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); + csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ + } + channel->desired_mode = mode; + musb_writew(epio, MUSB_TXCSR, csr); +#else + if (!is_cppi_enabled() && !tusb_dma_omap()) + return false; + + channel->actual_len = 0; + + /* + * TX uses "RNDIS" mode automatically but needs help + * to identify the zero-length-final-packet case. + */ + mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; +#endif + + qh->segsize = length; + + if (!dma->channel_program(channel, pkt_size, mode, + urb->transfer_dma + offset, length)) { + dma->channel_release(channel); + hw_ep->tx_channel = NULL; + + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS); + return false; + } + return true; +} /* * Program an HDRC endpoint as per the given URB * Context: irqs blocked, controller lock held */ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int is_out, - u8 *buf, u32 len) + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len) { struct dma_controller *dma_controller; struct dma_channel *dma_channel; @@ -667,12 +754,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* general endpoint setup */ if (epnum) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* flush all old state, set default */ musb_h_tx_flush_fifo(hw_ep); + + /* + * We must not clear the DMAMODE bit before or in + * the same cycle with the DMAENAB bit, so we clear + * the latter first... + */ csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT - | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB | MUSB_TXCSR_FRCDATATOG | MUSB_TXCSR_H_RXSTALL | MUSB_TXCSR_H_ERROR @@ -680,24 +772,20 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (usb_gettoggle(urb->dev, - qh->epnum, 1)) + if (usb_gettoggle(urb->dev, qh->epnum, 1)) csr |= MUSB_TXCSR_H_WR_DATATOGGLE | MUSB_TXCSR_H_DATATOGGLE; else csr |= MUSB_TXCSR_CLRDATATOG; - /* twice in case of double packet buffering */ musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ + csr &= ~MUSB_TXCSR_DMAMODE; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); } else { /* endpoint 0: just flush */ - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); + musb_h_ep0_flush_fifo(hw_ep); } /* target addr and (for multipoint) hub addr/port */ @@ -734,113 +822,14 @@ static void musb_ep_program(struct musb *musb, u8 epnum, else load_count = min((u32) packet_sz, len); -#ifdef CONFIG_USB_INVENTRA_DMA - if (dma_channel) { - - /* clear previous state */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - qh->segsize = min(len, dma_channel->max_len); - - if (qh->segsize <= packet_sz) - dma_channel->desired_mode = 0; - else - dma_channel->desired_mode = 1; - - - if (dma_channel->desired_mode == 0) { - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE); - csr |= (MUSB_TXCSR_DMAENAB); - /* against programming guide */ - } else - csr |= (MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE); - - musb_writew(epio, MUSB_TXCSR, csr); - - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - dma_channel->desired_mode, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - if (is_out) - hw_ep->tx_channel = NULL; - else - hw_ep->rx_channel = NULL; - dma_channel = NULL; - } - } -#endif - - /* candidate for DMA */ - if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { - - /* program endpoint CSRs first, then setup DMA. - * assume CPPI setup succeeds. - * defer enabling dma. - */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - dma_channel->actual_len = 0L; - qh->segsize = len; - - /* TX uses "rndis" mode automatically, but needs help - * to identify the zero-length-final-packet case. - */ - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - (urb->transfer_flags - & URB_ZERO_PACKET) - == URB_ZERO_PACKET, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - hw_ep->tx_channel = NULL; - dma_channel = NULL; - - /* REVISIT there's an error path here that - * needs handling: can't do dma, but - * there's no pio buffer address... - */ - } - } + if (dma_channel && musb_tx_dma_program(dma_controller, + hw_ep, qh, urb, offset, len)) + load_count = 0; if (load_count) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* PIO to load FIFO */ qh->segsize = load_count; musb_write_fifo(hw_ep, load_count, buf); - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_AUTOSET); - /* write CSR */ - csr |= MUSB_TXCSR_MODE; - - if (epnum) - musb_writew(epio, MUSB_TXCSR, csr); } /* re-enable interrupt */ @@ -895,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, dma_channel, packet_sz, !(urb->transfer_flags & URB_SHORT_NOT_OK), - urb->transfer_dma, + urb->transfer_dma + offset, qh->segsize); if (!dma_ok) { dma_controller->channel_release( @@ -1063,11 +1052,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr &= ~MUSB_CSR0_H_NAKTIMEOUT; musb_writew(epio, MUSB_CSR0, csr); } else { - csr |= MUSB_CSR0_FLUSHFIFO; - musb_writew(epio, MUSB_CSR0, csr); - musb_writew(epio, MUSB_CSR0, csr); - csr &= ~MUSB_CSR0_H_NAKTIMEOUT; - musb_writew(epio, MUSB_CSR0, csr); + musb_h_ep0_flush_fifo(hw_ep); } musb_writeb(epio, MUSB_NAKLIMIT0, 0); @@ -1081,10 +1066,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) * SHOULD NEVER HAPPEN! */ ERR("no URB for end 0\n"); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, 0); - + musb_h_ep0_flush_fifo(hw_ep); goto done; } @@ -1145,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) int pipe; bool done = false; u16 tx_csr; - size_t wLength = 0; - u8 *buf = NULL; + size_t length = 0; + size_t offset = 0; struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; @@ -1164,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* with CPPI, DMA sometimes triggers "extra" irqs */ if (!urb) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; } pipe = urb->pipe; @@ -1201,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - goto finish; + return; } if (status) { @@ -1233,29 +1215,89 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* second cppi case */ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; + } + + if (is_dma_capable() && dma && !status) { + /* + * DMA has completed. But if we're using DMA mode 1 (multi + * packet DMA), we need a terminal TXPKTRDY interrupt before + * we can consider this transfer completed, lest we trash + * its last packet when writing the next URB's data. So we + * switch back to mode 0 to get that interrupt; we'll come + * back here once it happens. + */ + if (tx_csr & MUSB_TXCSR_DMAMODE) { + /* + * We shouldn't clear DMAMODE with DMAENAB set; so + * clear them in a safe order. That should be OK + * once TXPKTRDY has been set (and I've never seen + * it being 0 at this moment -- DMA interrupt latency + * is significant) but if it hasn't been then we have + * no choice but to stop being polite and ignore the + * programmer's guide... :-) + * + * Note that we must write TXCSR with TXPKTRDY cleared + * in order not to re-trigger the packet send (this bit + * can't be cleared by CPU), and there's another caveat: + * TXPKTRDY may be set shortly and then cleared in the + * double-buffered FIFO mode, so we do an extra TXCSR + * read for debouncing... + */ + tx_csr &= musb_readw(epio, MUSB_TXCSR); + if (tx_csr & MUSB_TXCSR_TXPKTRDY) { + tx_csr &= ~(MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + } + tx_csr &= ~(MUSB_TXCSR_DMAMODE | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + + /* + * There is no guarantee that we'll get an interrupt + * after clearing DMAMODE as we might have done this + * too late (after TXPKTRDY was cleared by controller). + * Re-read TXCSR as we have spoiled its previous value. + */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + } + /* + * We may get here from a DMA completion or TXPKTRDY interrupt. + * In any case, we must check the FIFO status here and bail out + * only if the FIFO still has data -- that should prevent the + * "missed" TXPKTRDY interrupts and deal with double-buffered + * FIFO mode too... + */ + if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) { + DBG(2, "DMA complete but packet still in FIFO, " + "CSR %04x\n", tx_csr); + return; + } } - /* REVISIT this looks wrong... */ if (!status || dma || usb_pipeisoc(pipe)) { if (dma) - wLength = dma->actual_len; + length = dma->actual_len; else - wLength = qh->segsize; - qh->offset += wLength; + length = qh->segsize; + qh->offset += length; if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = qh->segsize; + d->actual_length = length; + d->status = status; if (++qh->iso_idx >= urb->number_of_packets) { done = true; } else { d++; - buf = urb->transfer_buffer + d->offset; - wLength = d->length; + offset = d->offset; + length = d->length; } } else if (dma) { done = true; @@ -1268,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) & URB_ZERO_PACKET)) done = true; if (!done) { - buf = urb->transfer_buffer - + qh->offset; - wLength = urb->transfer_buffer_length - - qh->offset; + offset = qh->offset; + length = urb->transfer_buffer_length - offset; } } } @@ -1290,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) urb->status = status; urb->actual_length = qh->offset; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT); + return; + } else if (usb_pipeisoc(pipe) && dma) { + if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, + offset, length)) + return; + } else if (tx_csr & MUSB_TXCSR_DMAENAB) { + DBG(1, "not complete, but DMA enabled?\n"); + return; + } - } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) { - /* WARN_ON(!buf); */ - - /* REVISIT: some docs say that when hw_ep->tx_double_buffered, - * (and presumably, fifo is not half-full) we should write TWO - * packets before updating TXCSR ... other docs disagree ... - */ - /* PIO: start next packet in this URB */ - if (wLength > qh->maxpacket) - wLength = qh->maxpacket; - musb_write_fifo(hw_ep, wLength, buf); - qh->segsize = wLength; - - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - } else - DBG(1, "not complete, but dma enabled?\n"); + /* + * PIO: start next packet in this URB. + * + * REVISIT: some docs say that when hw_ep->tx_double_buffered, + * (and presumably, FIFO is not half-full) we should write *two* + * packets before updating TXCSR; other docs disagree... + */ + if (length > qh->maxpacket) + length = qh->maxpacket; + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + qh->segsize = length; -finish: - return; + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); } @@ -1841,7 +1884,7 @@ static int musb_urb_enqueue( unsigned long flags; struct musb *musb = hcd_to_musb(hcd); struct usb_host_endpoint *hep = urb->ep; - struct musb_qh *qh = hep->hcpriv; + struct musb_qh *qh; struct usb_endpoint_descriptor *epd = &hep->desc; int ret; unsigned type_reg; @@ -1853,22 +1896,21 @@ static int musb_urb_enqueue( spin_lock_irqsave(&musb->lock, flags); ret = usb_hcd_link_urb_to_ep(hcd, urb); + qh = ret ? NULL : hep->hcpriv; + if (qh) + urb->hcpriv = qh; spin_unlock_irqrestore(&musb->lock, flags); - if (ret) - return ret; /* DMA mapping was already done, if needed, and this urb is on - * hep->urb_list ... so there's little to do unless hep wasn't - * yet scheduled onto a live qh. + * hep->urb_list now ... so we're done, unless hep wasn't yet + * scheduled onto a live qh. * * REVISIT best to keep hep->hcpriv valid until the endpoint gets * disabled, testing for empty qh->ring and avoiding qh setup costs * except for the first urb queued after a config change. */ - if (qh) { - urb->hcpriv = qh; - return 0; - } + if (qh || ret) + return ret; /* Allocate and initialize qh, minimizing the work done each time * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it. @@ -2044,7 +2086,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) * endpoint's irq status here to avoid bogus irqs. * clearing that status is platform-specific... */ - } else { + } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); csr &= ~(MUSB_TXCSR_AUTOSET @@ -2058,6 +2100,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) musb_writew(epio, MUSB_TXCSR, csr); /* flush cpu writebuffer */ csr = musb_readw(epio, MUSB_TXCSR); + } else { + musb_h_ep0_flush_fifo(ep); } if (status == 0) musb_advance_schedule(ep->musb, urb, ep, is_in); diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 8662e9e159c3..5e83f96d6b77 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel) void __iomem *mbase = musb_channel->controller->base; u8 bchannel = musb_channel->idx; + int offset; u16 csr; if (channel->status == MUSB_DMA_STATUS_BUSY) { if (musb_channel->transmit) { - - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_TXCSR)); - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAENAB | - MUSB_TXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR), - csr); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_TXCSR); + + /* + * The programming guide says that we must clear + * the DMAENAB bit before the DMAMODE bit... + */ + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(mbase, offset, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, csr); } else { - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_RXCSR)); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_RXCSR); + + csr = musb_readw(mbase, offset); csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR), - csr); + musb_writew(mbase, offset, csr); } musb_writew(mbase, @@ -296,20 +298,28 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) && ((channel->desired_mode == 0) || (channel->actual_len & (musb_channel->max_packet_sz - 1))) - ) { + ) { + u8 epnum = musb_channel->epnum; + int offset = MUSB_EP_OFFSET(epnum, + MUSB_TXCSR); + u16 txcsr; + + /* + * The programming guide says that we + * must clear DMAENAB before DMAMODE. + */ + musb_ep_select(mbase, epnum); + txcsr = musb_readw(mbase, offset); + txcsr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(mbase, offset, txcsr); /* Send out the packet */ - musb_ep_select(mbase, - musb_channel->epnum); - musb_writew(mbase, MUSB_EP_OFFSET( - musb_channel->epnum, - MUSB_TXCSR), - MUSB_TXCSR_TXPKTRDY); - } else { - musb_dma_completion( - musb, - musb_channel->epnum, - musb_channel->transmit); + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_TXPKTRDY; + musb_writew(mbase, offset, txcsr); } + musb_dma_completion(musb, musb_channel->epnum, + musb_channel->transmit); } } } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index dcc87aaa8628..8100f1d25904 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index daaf63db0b50..c09f658a448b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -913,6 +913,13 @@ #define ADI_GNICE_PID 0xF000 /* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 2e8e05462ef7..b66b71ccd12b 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ + { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d560c0b54e6e..47bd070f24b7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial); #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 +#define DLINK_VENDOR_ID 0x1186 +#define DLINK_PRODUCT_DWM_652 0x3e04 + + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e6d6b0c17fd9..7528b8d57f1c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ + {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ + {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */ + {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5be54c019662..ef7e5a8ceab5 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,8 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ ifeq ($(CONFIG_USB_LIBUSUAL),) usb-storage-objs += usual-tables.o else - obj-$(CONFIG_USB) += libusual.o usual-tables.o + obj-$(CONFIG_USB) += usb-libusual.o + usb-libusual-objs := libusual.o usual-tables.o endif obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 49aedb36dc19..fcb320217218 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) USB_ENDPOINT_HALT, endp, NULL, 0, 3*HZ); - /* reset the endpoint toggle */ if (result >= 0) - usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 0); + usb_reset_endpoint(us->pusb_dev, endp); US_DEBUGP("%s: result = %d\n", __func__, result); return result; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1c1f643e8a78..96db479d1165 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -975,12 +975,14 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), -/* Reported by Rauch Wolke <rauchwolke@gmx.net> */ +/* Reported by Rauch Wolke <rauchwolke@gmx.net> + * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) + */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, "Simple Tech/Datafab", "CF+SM Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), + US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: @@ -1376,6 +1378,14 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +/* Reported by Pascal Terjan <pterjan@mandriva.com> + * Ignore driver CD mode and force into modem mode by default. + */ +UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, + "D-Link", + "USB Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), + /* Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 386eaa22d215..4ac4300a3f9a 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work) mutex_lock(&wusbhc->mutex); wusbhc_devconnect_acked(wusbhc, wusb_dev); mutex_unlock(&wusbhc->mutex); + + wusb_dev_put(wusb_dev); } /* @@ -396,7 +398,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, /* After a device disconnects, change the GTK (see [WUSB] * section 6.2.11.2). */ - wusbhc_gtk_rekey(wusbhc); + if (wusbhc->active) + wusbhc_gtk_rekey(wusbhc); /* The Wireless USB part has forgotten about the device already; now * khubd's timer will pick up the disconnection and remove the USB @@ -1084,15 +1087,21 @@ error_mmcie_set: * wusbhc_devconnect_stop - stop managing connected devices * @wusbhc: the WUSB HC * - * Removes the Host Info IE and stops the keep alives. - * - * FIXME: should this disconnect all devices? + * Disconnects any devices still connected, stops the keep alives and + * removes the Host Info IE. */ void wusbhc_devconnect_stop(struct wusbhc *wusbhc) { - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - WARN_ON(!list_empty(&wusbhc->cack_list)); + int i; + mutex_lock(&wusbhc->mutex); + for (i = 0; i < wusbhc->ports_max; i++) { + if (wusbhc->port[i].wusb_dev) + __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); + } + mutex_unlock(&wusbhc->mutex); + + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); kfree(wusbhc->wuie_host_info); wusbhc->wuie_host_info = NULL; diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 07c63a31c799..ee6256f23636 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, wusb_trust_timeout_store); /* - * Show & store the current WUSB CHID + * Show the current WUSB CHID. */ static ssize_t wusb_chid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + const struct wusb_ckhdid *chid; ssize_t result = 0; if (wusbhc->wuie_host_info != NULL) - result += ckhdid_printf(buf, PAGE_SIZE, - &wusbhc->wuie_host_info->CHID); + chid = &wusbhc->wuie_host_info->CHID; + else + chid = &wusb_ckhdid_zero; + + result += ckhdid_printf(buf, PAGE_SIZE, chid); + result += sprintf(buf + result, "\n"); + return result; } /* - * Store a new CHID - * - * This will (FIXME) trigger many changes. - * - * - Send an all zeros CHID and it will stop the controller - * - Send a non-zero CHID and it will start it - * (unless it was started, it will just change the CHID, - * diconnecting all devices first). + * Store a new CHID. * - * So first we scan the MMC we are sent and then we act on it. We - * read it in the same format as we print it, an ASCII string of 16 - * hex bytes. + * - Write an all zeros CHID and it will stop the controller + * - Write a non-zero CHID and it will start it. * * See wusbhc_chid_set() for more info. */ @@ -339,13 +337,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) { struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (status == 0) { + if (status == 0 && wusb_dev) { wusb_dev->entry_ts = jiffies; - /* wusbhc_devconnect_acked() can't be called from from + /* wusbhc_devconnect_acked() can't be called from atomic context so defer it to a work queue. */ if (!list_empty(&wusb_dev->cack_node)) queue_work(wusbd, &wusb_dev->devconnect_acked_work); + else + wusb_dev_put(wusb_dev); } usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); diff --git a/include/linux/usb.h b/include/linux/usb.h index c6b2ab41b908..3aa2cd1f8d08 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index, extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); @@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io); #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - - static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { |