diff options
| -rw-r--r-- | drivers/remoteproc/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/remoteproc/st_remoteproc.c | 113 |
2 files changed, 114 insertions, 2 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 402de7089302..65f86bc24c07 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -118,6 +118,9 @@ config ST_REMOTEPROC tristate "ST remoteproc support" depends on ARCH_STI depends on REMOTEPROC + select MAILBOX + select STI_MBOX + select RPMSG_VIRTIO help Say y here to support ST's adjunct processors via the remote processor framework. diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c index 1468ba213811..d534bf23dc56 100644 --- a/drivers/remoteproc/st_remoteproc.c +++ b/drivers/remoteproc/st_remoteproc.c @@ -15,6 +15,7 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/mailbox_client.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> @@ -25,6 +26,16 @@ #include <linux/remoteproc.h> #include <linux/reset.h> +#include "remoteproc_internal.h" + +#define ST_RPROC_VQ0 0 +#define ST_RPROC_VQ1 1 +#define ST_RPROC_MAX_VRING 2 + +#define MBOX_RX 0 +#define MBOX_TX 1 +#define MBOX_MAX 2 + struct st_rproc_config { bool sw_reset; bool pwr_reset; @@ -39,8 +50,47 @@ struct st_rproc { u32 clk_rate; struct regmap *boot_base; u32 boot_offset; + struct mbox_chan *mbox_chan[ST_RPROC_MAX_VRING * MBOX_MAX]; + struct mbox_client mbox_client_vq0; + struct mbox_client mbox_client_vq1; }; +static void st_rproc_mbox_callback(struct device *dev, u32 msg) +{ + struct rproc *rproc = dev_get_drvdata(dev); + + if (rproc_vq_interrupt(rproc, msg) == IRQ_NONE) + dev_dbg(dev, "no message was found in vqid %d\n", msg); +} + +static +void st_rproc_mbox_callback_vq0(struct mbox_client *mbox_client, void *data) +{ + st_rproc_mbox_callback(mbox_client->dev, 0); +} + +static +void st_rproc_mbox_callback_vq1(struct mbox_client *mbox_client, void *data) +{ + st_rproc_mbox_callback(mbox_client->dev, 1); +} + +static void st_rproc_kick(struct rproc *rproc, int vqid) +{ + struct st_rproc *ddata = rproc->priv; + struct device *dev = rproc->dev.parent; + int ret; + + /* send the index of the triggered virtqueue in the mailbox payload */ + if (WARN_ON(vqid >= ST_RPROC_MAX_VRING)) + return; + + ret = mbox_send_message(ddata->mbox_chan[vqid * MBOX_MAX + MBOX_TX], + (void *)&vqid); + if (ret < 0) + dev_err(dev, "failed to send message via mbox: %d\n", ret); +} + static int st_rproc_start(struct rproc *rproc) { struct st_rproc *ddata = rproc->priv; @@ -108,6 +158,7 @@ static int st_rproc_stop(struct rproc *rproc) } static const struct rproc_ops st_rproc_ops = { + .kick = st_rproc_kick, .start = st_rproc_start, .stop = st_rproc_stop, }; @@ -221,8 +272,9 @@ static int st_rproc_probe(struct platform_device *pdev) struct st_rproc *ddata; struct device_node *np = dev->of_node; struct rproc *rproc; + struct mbox_chan *chan; int enabled; - int ret; + int ret, i; match = of_match_device(st_rproc_match, dev); if (!match || !match->data) { @@ -257,12 +309,65 @@ static int st_rproc_probe(struct platform_device *pdev) clk_set_rate(ddata->clk, ddata->clk_rate); } + if (of_get_property(np, "mbox-names", NULL)) { + ddata->mbox_client_vq0.dev = dev; + ddata->mbox_client_vq0.tx_done = NULL; + ddata->mbox_client_vq0.tx_block = false; + ddata->mbox_client_vq0.knows_txdone = false; + ddata->mbox_client_vq0.rx_callback = st_rproc_mbox_callback_vq0; + + ddata->mbox_client_vq1.dev = dev; + ddata->mbox_client_vq1.tx_done = NULL; + ddata->mbox_client_vq1.tx_block = false; + ddata->mbox_client_vq1.knows_txdone = false; + ddata->mbox_client_vq1.rx_callback = st_rproc_mbox_callback_vq1; + + /* + * To control a co-processor without IPC mechanism. + * This driver can be used without mbox and rpmsg. + */ + chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_rx"); + if (IS_ERR(chan)) { + dev_err(&rproc->dev, "failed to request mbox chan 0\n"); + ret = PTR_ERR(chan); + goto free_clk; + } + ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_RX] = chan; + + chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_tx"); + if (IS_ERR(chan)) { + dev_err(&rproc->dev, "failed to request mbox chan 0\n"); + ret = PTR_ERR(chan); + goto free_mbox; + } + ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_TX] = chan; + + chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_rx"); + if (IS_ERR(chan)) { + dev_err(&rproc->dev, "failed to request mbox chan 1\n"); + ret = PTR_ERR(chan); + goto free_mbox; + } + ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_RX] = chan; + + chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_tx"); + if (IS_ERR(chan)) { + dev_err(&rproc->dev, "failed to request mbox chan 1\n"); + ret = PTR_ERR(chan); + goto free_mbox; + } + ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_TX] = chan; + } + ret = rproc_add(rproc); if (ret) - goto free_clk; + goto free_mbox; return 0; +free_mbox: + for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++) + mbox_free_channel(ddata->mbox_chan[i]); free_clk: clk_unprepare(ddata->clk); free_rproc: @@ -274,6 +379,7 @@ static int st_rproc_remove(struct platform_device *pdev) { struct rproc *rproc = platform_get_drvdata(pdev); struct st_rproc *ddata = rproc->priv; + int i; rproc_del(rproc); @@ -281,6 +387,9 @@ static int st_rproc_remove(struct platform_device *pdev) of_reserved_mem_device_release(&pdev->dev); + for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++) + mbox_free_channel(ddata->mbox_chan[i]); + rproc_free(rproc); return 0; |