summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt35
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml59
-rw-r--r--drivers/i2c/busses/i2c-gxp.c2
-rw-r--r--drivers/i2c/busses/i2c-imx-lpi2c.c4
-rw-r--r--drivers/i2c/busses/i2c-omap.c2
-rw-r--r--drivers/i2c/busses/i2c-tegra.c40
-rw-r--r--include/linux/i2c.h4
7 files changed, 91 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
deleted file mode 100644
index 1b87b741fa8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Broadcom Kona Family I2C
-=========================
-
-This I2C controller is used in the following Broadcom SoCs:
-
- BCM11130
- BCM11140
- BCM11351
- BCM28145
- BCM28155
-
-Required Properties
--------------------
-- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
-- reg: Physical base address and length of controller registers
-- interrupts: The interrupt number used by the controller
-- clocks: clock specifier for the kona i2c external clock
-- clock-frequency: The I2C bus frequency in Hz
-- #address-cells: Should be <1>
-- #size-cells: Should be <0>
-
-Refer to clocks/clock-bindings.txt for generic clock consumer
-properties.
-
-Example:
-
-i2c@3e016000 {
- compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
- reg = <0x3e016000 0x80>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bsc1_clk>;
- clock-frequency = <400000>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
new file mode 100644
index 000000000000..7a694af90fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,kona-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family I2C controller
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm11351-i2c
+ - brcm,bcm21664-i2c
+ - brcm,bcm23550-i2c
+ - const: brcm,kona-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000, 1000000, 3400000 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c@3e016000 {
+ compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+ reg = <0x3e016000 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bsc1_clk>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+...
diff --git a/drivers/i2c/busses/i2c-gxp.c b/drivers/i2c/busses/i2c-gxp.c
index d4b55d989a26..8ea3fb5e4c7f 100644
--- a/drivers/i2c/busses/i2c-gxp.c
+++ b/drivers/i2c/busses/i2c-gxp.c
@@ -353,7 +353,6 @@ static void gxp_i2c_chk_data_ack(struct gxp_i2c_drvdata *drvdata)
writew(value, drvdata->base + GXP_I2CMCMD);
}
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
static bool gxp_i2c_slave_irq_handler(struct gxp_i2c_drvdata *drvdata)
{
u8 value;
@@ -437,7 +436,6 @@ static bool gxp_i2c_slave_irq_handler(struct gxp_i2c_drvdata *drvdata)
return true;
}
-#endif
static irqreturn_t gxp_i2c_irq_handler(int irq, void *_drvdata)
{
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index a49b14d52a98..1af0a637d7f1 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -639,7 +639,7 @@ static int __maybe_unused lpi2c_runtime_suspend(struct device *dev)
{
struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
- clk_bulk_disable_unprepare(lpi2c_imx->num_clks, lpi2c_imx->clks);
+ clk_bulk_disable(lpi2c_imx->num_clks, lpi2c_imx->clks);
pinctrl_pm_select_sleep_state(dev);
return 0;
@@ -651,7 +651,7 @@ static int __maybe_unused lpi2c_runtime_resume(struct device *dev)
int ret;
pinctrl_pm_select_default_state(dev);
- ret = clk_bulk_prepare_enable(lpi2c_imx->num_clks, lpi2c_imx->clks);
+ ret = clk_bulk_enable(lpi2c_imx->num_clks, lpi2c_imx->clks);
if (ret) {
dev_err(dev, "failed to enable I2C clock, ret=%d\n", ret);
return ret;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2b4e2be51318..4199f57a6bf2 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1058,7 +1058,7 @@ omap_i2c_isr(int irq, void *dev_id)
u16 stat;
stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
- mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
+ mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG) & ~OMAP_I2C_STAT_NACK;
if (stat & mask)
ret = IRQ_WAKE_THREAD;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6aab84c8d22b..157066f06a32 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -242,9 +242,10 @@ struct tegra_i2c_hw_feature {
* @is_dvc: identifies the DVC I2C controller, has a different register layout
* @is_vi: identifies the VI I2C controller, has a different register layout
* @msg_complete: transfer completion notifier
+ * @msg_buf_remaining: size of unsent data in the message buffer
+ * @msg_len: length of message in current transfer
* @msg_err: error code for completed message
* @msg_buf: pointer to current message data
- * @msg_buf_remaining: size of unsent data in the message buffer
* @msg_read: indicates that the transfer is a read access
* @timings: i2c timings information like bus frequency
* @multimaster_mode: indicates that I2C controller is in multi-master mode
@@ -277,6 +278,7 @@ struct tegra_i2c_dev {
struct completion msg_complete;
size_t msg_buf_remaining;
+ unsigned int msg_len;
int msg_err;
u8 *msg_buf;
@@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
else
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
- packet_header = msg->len - 1;
+ packet_header = i2c_dev->msg_len - 1;
if (i2c_dev->dma_mode && !i2c_dev->msg_read)
*dma_buf++ = packet_header;
@@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
return err;
i2c_dev->msg_buf = msg->buf;
+ i2c_dev->msg_len = msg->len;
- /* The condition true implies smbus block read and len is already read */
- if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
- i2c_dev->msg_buf = msg->buf + 1;
-
- i2c_dev->msg_buf_remaining = msg->len;
i2c_dev->msg_err = I2C_ERR_NONE;
i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
reinit_completion(&i2c_dev->msg_complete);
+ /*
+ * For SMBUS block read command, read only 1 byte in the first transfer.
+ * Adjust that 1 byte for the next transfer in the msg buffer and msg
+ * length.
+ */
+ if (msg->flags & I2C_M_RECV_LEN) {
+ if (end_state == MSG_END_CONTINUE) {
+ i2c_dev->msg_len = 1;
+ } else {
+ i2c_dev->msg_buf += 1;
+ i2c_dev->msg_len -= 1;
+ }
+ }
+
+ i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
+
if (i2c_dev->msg_read)
- xfer_size = msg->len;
+ xfer_size = i2c_dev->msg_len;
else
- xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
+ xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
@@ -1295,7 +1309,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
if (!i2c_dev->msg_read) {
if (i2c_dev->dma_mode) {
memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
- msg->buf, msg->len);
+ msg->buf, i2c_dev->msg_len);
dma_sync_single_for_device(i2c_dev->dma_dev,
i2c_dev->dma_phys,
@@ -1352,7 +1366,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->dma_phys,
xfer_size, DMA_FROM_DEVICE);
- memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg->len);
+ memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len);
}
}
@@ -1408,8 +1422,8 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
if (ret)
break;
- /* Set the read byte as msg len */
- msgs[i].len = msgs[i].buf[0];
+ /* Set the msg length from first byte */
+ msgs[i].len += msgs[i].buf[0];
dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
}
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 5ba89663ea86..13a1ce38cb0c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -385,7 +385,6 @@ static inline void i2c_set_clientdata(struct i2c_client *client, void *data)
/* I2C slave support */
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
enum i2c_slave_event {
I2C_SLAVE_READ_REQUESTED,
I2C_SLAVE_WRITE_REQUESTED,
@@ -396,9 +395,10 @@ enum i2c_slave_event {
int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb);
int i2c_slave_unregister(struct i2c_client *client);
-bool i2c_detect_slave_mode(struct device *dev);
int i2c_slave_event(struct i2c_client *client,
enum i2c_slave_event event, u8 *val);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+bool i2c_detect_slave_mode(struct device *dev);
#else
static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 01:50:01 +0000