diff options
| -rw-r--r-- | arch/arm/plat-s3c/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/include/plat/pm.h | 12 | ||||
| -rw-r--r-- | arch/arm/plat-s3c/pm-check.c | 220 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/pm.c | 210 |
4 files changed, 240 insertions, 203 deletions
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index afd8d089ba16..8d7815d25a51 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -21,6 +21,7 @@ obj-y += gpio-config.o # PM support obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o # devices diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index a1520997ab82..95c2612d4976 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -101,3 +101,15 @@ extern void s3c_pm_dbg(const char *msg, ...); #else #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) #endif + +/* suspend memory checking */ + +#ifdef CONFIG_S3C2410_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while(0) +#define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_store() do { } while(0) +#endif diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c new file mode 100644 index 000000000000..95ba7693b5af --- /dev/null +++ b/arch/arm/plat-s3c/pm-check.c @@ -0,0 +1,220 @@ +/* linux/arch/arm/plat-s3c/pm-check.c + * originally in linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Power Mangament - suspend/resume memory corruptiuon check. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/init.h> +#include <linux/crc32.h> +#include <linux/ioport.h> + +#include <plat/pm.h> + +#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + ptr->start, ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck*() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *ptr; + u32 calc; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + S3C_PMDBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) { + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); + kfree(crcs); + crcs = NULL; + } +} diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index c161f9c9a1d4..e2ae12da16e7 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -31,8 +31,6 @@ #include <linux/errno.h> #include <linux/time.h> #include <linux/interrupt.h> -#include <linux/crc32.h> -#include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -159,200 +157,6 @@ static void s3c2410_pm_debug_init(void) static struct sleep_save uart_save[] = {}; #endif -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - S3C_PMDBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) -{ - crc_size = 0; - - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); - - S3C_PMDBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); - - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} - -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; - } - - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - ptr = phys_to_virt(addr); - - if (in_region(ptr, left, crcs, crc_size)) { - S3C_PMDBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } - - if (in_region(ptr, left, save_at, 32*4 )) { - S3C_PMDBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; - } - - return val; -} - -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } -} - -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - /* s3c2410_pm_show_resume_irqs * * print any IRQs asserted at resume time (ie, we woke from) @@ -372,13 +176,13 @@ static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, } } -/* s3c2410_pm_check_resume_pin +/* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and * make any necessary adjustments if it is not */ -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; @@ -417,11 +221,11 @@ static void s3c2410_pm_configure_extint(void) */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); } for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); } } @@ -642,7 +446,7 @@ static int s3c2410_pm_enter(suspend_state_t state) /* prepare check area if configured */ - s3c2410_pm_check_prepare(); + s3c_pm_check_prepare(); /* store the physical address of the register recovery block */ @@ -681,7 +485,7 @@ static int s3c2410_pm_enter(suspend_state_t state) flush_cache_all(); - s3c2410_pm_check_store(); + s3c_pm_check_store(); /* send the cpu to sleep... */ @@ -723,7 +527,7 @@ static int s3c2410_pm_enter(suspend_state_t state) S3C_PMDBG("post sleep, preparing to return\n"); - s3c2410_pm_check_restore(); + s3c_pm_check_restore(); /* ok, let's return from sleep */ |