summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/it879
-rw-r--r--drivers/hwmon/it87.c32
2 files changed, 27 insertions, 14 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index f4ce1fdbeff6..d931525f3f37 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -11,7 +11,9 @@ Supported chips:
Prefix: 'it8712'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/
+ http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
+ http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
+ http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
* IT8716F/IT8726F
Prefix: 'it8716'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you
can't have both on a given board.
The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are supported by the driver for the IT8716F and
-IT8718F but not for the IT8712F
+2 additional fans. The additional fans are supported by the driver.
The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
16-bit tachometer counters for fans 1 to 3. This is better (no more fan
clock divider mess) but not compatible with the older chips and
revisions. For now, the driver only uses the 16-bit mode on the
-IT8716F and IT8718F.
+late IT8712F, IT8716F and IT8718F.
The IT8726F is just bit enhanced IT8716F with additional hardware
for AMD power sequencing. Therefore the chip will appear as IT8716F
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index e12c132ff83a..2a365681f969 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -151,9 +151,9 @@ static int fix_pwm_polarity;
/* The IT8718F has the VID value in a different register, in Super-I/O
configuration space. */
#define IT87_REG_VID 0x0a
-/* Warning: register 0x0b is used for something completely different in
- new chips/revisions. I suspect only 16-bit tachometer mode will work
- for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ mode. */
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
@@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = {
struct it87_sio_data {
enum chips type;
/* Values read from Super-I/O config space */
+ u8 revision;
u8 vid_value;
};
@@ -242,6 +243,7 @@ struct it87_sio_data {
struct it87_data {
struct device *hwmon_dev;
enum chips type;
+ u8 revision;
unsigned short addr;
const char *name;
@@ -268,6 +270,14 @@ struct it87_data {
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+ /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+ This is the first revision with 16bit tachometer support. */
+ return (data->type == it8712 && data->revision >= 0x07)
+ || data->type == it8716
+ || data->type == it8718;
+}
static int it87_probe(struct platform_device *pdev);
static int __devexit it87_remove(struct platform_device *pdev);
@@ -991,8 +1001,9 @@ static int __init it87_find(unsigned short *address,
}
err = 0;
+ sio_data->revision = superio_inb(DEVREV) & 0x0f;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
- chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (chip_type != IT8705F_DEVID) {
@@ -1045,6 +1056,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
data->addr = res->start;
data->type = sio_data->type;
+ data->revision = sio_data->revision;
data->name = names[sio_data->type];
/* Now, we do the remaining detection. */
@@ -1069,7 +1081,7 @@ static int __devinit it87_probe(struct platform_device *pdev)
goto ERROR2;
/* Do not create fan files for disabled fans */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
/* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
if ((err = device_create_file(dev,
@@ -1350,7 +1362,7 @@ static void __devinit it87_init_device(struct platform_device *pdev)
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
@@ -1426,7 +1438,7 @@ static struct it87_data *it87_update_device(struct device *dev)
data->fan[i] = it87_read_value(data,
IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
data->fan[i] |= it87_read_value(data,
IT87_REG_FANX[i]) << 8;
data->fan_min[i] |= it87_read_value(data,
@@ -1443,8 +1455,7 @@ static struct it87_data *it87_update_device(struct device *dev)
}
/* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && data->type != it8716
- && data->type != it8718) {
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
@@ -1460,7 +1471,8 @@ static struct it87_data *it87_update_device(struct device *dev)
data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
- /* The 8705 does not have VID capability */
+ /* The 8705 does not have VID capability.
+ The 8718 does not use IT87_REG_VID for the same purpose. */
if (data->type == it8712 || data->type == it8716) {
data->vid = it87_read_value(data, IT87_REG_VID);
/* The older IT8712F revisions had only 5 VID pins,
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:50:08 +0000