diff options
| -rw-r--r-- | Documentation/pinctrl.txt | 11 | ||||
| -rw-r--r-- | drivers/pinctrl/pinconf.c | 174 | ||||
| -rw-r--r-- | include/linux/pinctrl/consumer.h | 43 |
3 files changed, 2 insertions, 226 deletions
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 3ee24759be0f..c5948c7d662a 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -203,15 +203,8 @@ using a certain resistor value - pull up and pull down - so that the pin has a stable value when nothing is driving the rail it is connected to, or when it's unconnected. -Pin configuration can be programmed either using the explicit APIs described -immediately below, or by adding configuration entries into the mapping table; -see section "Board/machine configuration" below. - -For example, a platform may do the following to pull up a pin to VDD: - -#include <linux/pinctrl/consumer.h> - -ret = pin_config_set("foo-dev", "FOO_GPIO_PIN", PLATFORM_X_PULL_UP); +Pin configuration can be programmed by adding configuration entries into the +mapping table; see section "Board/machine configuration" below. The format and meaning of the configuration parameter, PLATFORM_X_PULL_UP above, is entirely defined by the pin controller driver. diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 694c3ace4520..e875f21a5908 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -75,98 +75,6 @@ int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, return ops->pin_config_get(pctldev, pin, config); } -/** - * pin_config_get() - get the configuration of a single pin parameter - * @dev_name: name of the pin controller device for this pin - * @name: name of the pin to get the config for - * @config: the config pointed to by this argument will be filled in with the - * current pin state, it can be used directly by drivers as a numeral, or - * it can be dereferenced to any struct. - */ -int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - struct pinctrl_dev *pctldev; - int pin; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - pin = -EINVAL; - return pin; - } - - mutex_lock(&pctldev->mutex); - - pin = pin_get_from_name(pctldev, name); - if (pin < 0) - goto unlock; - - pin = pin_config_get_for_pin(pctldev, pin, config); - -unlock: - mutex_unlock(&pctldev->mutex); - return pin; -} -EXPORT_SYMBOL(pin_config_get); - -static int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) -{ - const struct pinconf_ops *ops = pctldev->desc->confops; - int ret; - - if (!ops || !ops->pin_config_set) { - dev_err(pctldev->dev, "cannot configure pin, missing " - "config function in driver\n"); - return -EINVAL; - } - - ret = ops->pin_config_set(pctldev, pin, config); - if (ret) { - dev_err(pctldev->dev, - "unable to set pin configuration on pin %d\n", pin); - return ret; - } - - return 0; -} - -/** - * pin_config_set() - set the configuration of a single pin parameter - * @dev_name: name of pin controller device for this pin - * @name: name of the pin to set the config for - * @config: the config in this argument will contain the desired pin state, it - * can be used directly by drivers as a numeral, or it can be dereferenced - * to any struct. - */ -int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - struct pinctrl_dev *pctldev; - int pin, ret; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - ret = -EINVAL; - return ret; - } - - mutex_lock(&pctldev->mutex); - - pin = pin_get_from_name(pctldev, name); - if (pin < 0) { - ret = pin; - goto unlock; - } - - ret = pin_config_set_for_pin(pctldev, pin, config); - -unlock: - mutex_unlock(&pctldev->mutex); - return ret; -} -EXPORT_SYMBOL(pin_config_set); - int pin_config_group_get(const char *dev_name, const char *pin_group, unsigned long *config) { @@ -204,88 +112,6 @@ unlock: mutex_unlock(&pctldev->mutex); return ret; } -EXPORT_SYMBOL(pin_config_group_get); - -int pin_config_group_set(const char *dev_name, const char *pin_group, - unsigned long config) -{ - struct pinctrl_dev *pctldev; - const struct pinconf_ops *ops; - const struct pinctrl_ops *pctlops; - int selector; - const unsigned *pins; - unsigned num_pins; - int ret; - int i; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - ret = -EINVAL; - return ret; - } - - mutex_lock(&pctldev->mutex); - - ops = pctldev->desc->confops; - pctlops = pctldev->desc->pctlops; - - if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) { - dev_err(pctldev->dev, "cannot configure pin group, missing " - "config function in driver\n"); - ret = -EINVAL; - goto unlock; - } - - selector = pinctrl_get_group_selector(pctldev, pin_group); - if (selector < 0) { - ret = selector; - goto unlock; - } - - ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins); - if (ret) { - dev_err(pctldev->dev, "cannot configure pin group, error " - "getting pins\n"); - goto unlock; - } - - /* - * If the pin controller supports handling entire groups we use that - * capability. - */ - if (ops->pin_config_group_set) { - ret = ops->pin_config_group_set(pctldev, selector, config); - /* - * If the pin controller prefer that a certain group be handled - * pin-by-pin as well, it returns -EAGAIN. - */ - if (ret != -EAGAIN) - goto unlock; - } - - /* - * If the controller cannot handle entire groups, we configure each pin - * individually. - */ - if (!ops->pin_config_set) { - ret = 0; - goto unlock; - } - - for (i = 0; i < num_pins; i++) { - ret = ops->pin_config_set(pctldev, pins[i], config); - if (ret < 0) - goto unlock; - } - - ret = 0; - -unlock: - mutex_unlock(&pctldev->mutex); - - return ret; -} -EXPORT_SYMBOL(pin_config_group_set); int pinconf_map_to_setting(struct pinctrl_map const *map, struct pinctrl_setting *setting) diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index d071d850d1de..18eccefea06e 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -192,47 +192,4 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select_default( return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); } -#ifdef CONFIG_PINCONF - -extern int pin_config_get(const char *dev_name, const char *name, - unsigned long *config); -extern int pin_config_set(const char *dev_name, const char *name, - unsigned long config); -extern int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config); -extern int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config); - -#else - -static inline int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - return 0; -} - -static inline int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config) -{ - return 0; -} - -#endif - #endif /* __LINUX_PINCTRL_CONSUMER_H */ |