diff options
| -rw-r--r-- | arch/arm/mach-davinci/board-da830-evm.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-davinci/board-omapl138-hawk.c | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-davinci.h | 23 |
3 files changed, 5 insertions, 26 deletions
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 3d8cf8cbd98a..df1f4091a8ae 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -18,6 +18,7 @@ #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/platform_data/at24.h> +#include <linux/mfd/da8xx-cfgchip.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> @@ -116,7 +117,7 @@ static __init void da830_evm_usb_init(void) cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); /* USB2.0 PHY reference clock is 24 MHz */ - cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK; cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; /* @@ -133,7 +134,7 @@ static __init void da830_evm_usb_init(void) * controller won't be able to drive VBUS thinking that it's a B-device. * Otherwise, we want to use the OTG mode and enable VBUS comparators. */ - cfgchip2 &= ~CFGCHIP2_OTGMODE; + cfgchip2 &= ~CFGCHIP2_OTGMODE_MASK; #ifdef CONFIG_USB_MUSB_HOST cfgchip2 |= CFGCHIP2_FORCE_HOST; #else diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index ee624861ca66..e1efa1066c1e 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/gpio.h> +#include <linux/mfd/da8xx-cfgchip.h> #include <linux/platform_data/gpio-davinci.h> #include <asm/mach-types.h> @@ -254,7 +255,7 @@ static __init void omapl138_hawk_usb_init(void) /* Setup the Ref. clock frequency for the HAWK at 24 MHz. */ cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 &= ~CFGCHIP2_REFFREQ_MASK; cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h index e0bc4abe69c2..0926e99f2e8f 100644 --- a/include/linux/platform_data/usb-davinci.h +++ b/include/linux/platform_data/usb-davinci.h @@ -11,29 +11,6 @@ #ifndef __ASM_ARCH_USB_H #define __ASM_ARCH_USB_H -/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ -#define CFGCHIP2_PHYCLKGD (1 << 17) -#define CFGCHIP2_VBUSSENSE (1 << 16) -#define CFGCHIP2_RESET (1 << 15) -#define CFGCHIP2_OTGMODE (3 << 13) -#define CFGCHIP2_NO_OVERRIDE (0 << 13) -#define CFGCHIP2_FORCE_HOST (1 << 13) -#define CFGCHIP2_FORCE_DEVICE (2 << 13) -#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) -#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) -#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) -#define CFGCHIP2_PHYPWRDN (1 << 10) -#define CFGCHIP2_OTGPWRDN (1 << 9) -#define CFGCHIP2_DATPOL (1 << 8) -#define CFGCHIP2_USB1SUSPENDM (1 << 7) -#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ -#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ -#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ -#define CFGCHIP2_REFFREQ (0xf << 0) -#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) -#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) -#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) - struct da8xx_ohci_root_hub; typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, |