diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt | 60 | ||||
| -rw-r--r-- | drivers/mmc/host/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/mmc/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mmc/host/dw_mmc-k3.c | 132 |
4 files changed, 203 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt new file mode 100644 index 000000000000..d7e2d7f159bb --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -0,0 +1,60 @@ +* Hisilicon specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +Read synopsys-dw-mshc.txt for more details + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be one of the following. + - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions. + +* clock-freq-table: should be the frequency (in Hz) array of the ciu clock + in each supported mode. + 0. CIU clock rate in Hz for DS mode + 1. CIU clock rate in Hz for MMC HS mode + 2. CIU clock rate in Hz for SD HS mode + 3. CIU clock rate in Hz for SDR12 mode + 4. CIU clock rate in Hz for SDR25 mode + 5. CIU clock rate in Hz for SDR50 mode + 6. CIU clock rate in Hz for SDR104 mode + 7. CIU clock rate in Hz for DDR50 mode + 8. CIU clock rate in Hz for HS200 mode + +Example: + + /* for Hi3620 */ + + /* SoC portion */ + dwmmc_0: dwmmc0@fcd03000 { + compatible = "hisilicon,hi4511-dw-mshc"; + reg = <0xfcd03000 0x1000>; + interrupts = <0 16 4>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>; + clock-names = "ciu", "biu"; + clock-freq-table = + <25000000 0 50000000 25000000 50000000 100000000 0 50000000>; + }; + + /* Board portion */ + dwmmc0@fcd03000 { + num-slots = <1>; + vmmc-supply = <&ldo12>; + fifo-depth = <0x100>; + supports-highspeed; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + cd-gpios = <&gpio10 3 0>; + }; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 265ba4800134..6da5a085f5f8 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -576,6 +576,16 @@ config MMC_DW_SOCFPGA This selects support for Altera SoCFPGA specific extensions to the Synopsys DesignWare Memory Card Interface driver. +config MMC_DW_K3 + tristate "K3 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + select MMC_DW_IDMAC + help + This selects support for Hisilicon K3 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Hisilicon K3 SoC's. + config MMC_DW_PCI tristate "Synopsys Designware MCI support on PCI bus" depends on MMC_DW && PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 5dd3de9b2677..a69fd640698d 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_MMC_DW) += dw_mmc.o obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o obj-$(CONFIG_MMC_DW_SOCFPGA) += dw_mmc-socfpga.o +obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c new file mode 100644 index 000000000000..68e5e428e8f6 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-k3.c @@ -0,0 +1,132 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/of_address.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define MAX_NUMS 10 +struct dw_mci_k3_priv_data { + u32 clk_table[MAX_NUMS]; +}; + +static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_k3_priv_data *priv = host->priv; + u32 rate = priv->clk_table[ios->timing]; + int ret; + + if (!rate) { + dev_warn(host->dev, + "no specified rate in timing %u\n", ios->timing); + return; + } + + ret = clk_set_rate(host->ciu_clk, rate); + if (ret) + dev_warn(host->dev, "failed to set clock rate %uHz\n", rate); + + host->bus_hz = clk_get_rate(host->ciu_clk); +} + +static int dw_mci_k3_parse_dt(struct dw_mci *host) +{ + struct dw_mci_k3_priv_data *priv; + struct device_node *node = host->dev->of_node; + struct property *prop; + const __be32 *cur; + u32 val, num = 0; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(host->dev, "mem alloc failed for private data\n"); + return -ENOMEM; + } + host->priv = priv; + + of_property_for_each_u32(node, "clock-freq-table", prop, cur, val) { + if (num >= MAX_NUMS) + break; + priv->clk_table[num++] = val; + } + return 0; +} + +static const struct dw_mci_drv_data k3_drv_data = { + .set_ios = dw_mci_k3_set_ios, + .parse_dt = dw_mci_k3_parse_dt, +}; + +static const struct of_device_id dw_mci_k3_match[] = { + { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_k3_match); + +static int dw_mci_k3_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data; + const struct of_device_id *match; + + match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); + drv_data = match->data; + + return dw_mci_pltfm_register(pdev, drv_data); +} + +static int dw_mci_k3_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = dw_mci_suspend(host); + if (!ret) + clk_disable_unprepare(host->ciu_clk); + + return ret; +} + +static int dw_mci_k3_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + return ret; + } + + return dw_mci_resume(host); +} + +SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume); + +static struct platform_driver dw_mci_k3_pltfm_driver = { + .probe = dw_mci_k3_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dwmmc_k3", + .of_match_table = dw_mci_k3_match, + .pm = &dw_mci_k3_pmops, + }, +}; + +module_platform_driver(dw_mci_k3_pltfm_driver); + +MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:dwmmc-k3"); |