summaryrefslogtreecommitdiff
path: root/net/mac80211/pm.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2009-05-17 11:40:42 +0200
committerJohn W. Linville <linville@tuxdriver.com>2009-05-20 14:46:25 -0400
commit5bb644a0fd25a5e083ecbfaa92a211db99aa6ef7 (patch)
treed2a6d5ff2323db0c475be15c63bb8fc55482a1e2 /net/mac80211/pm.c
parentcc32abd494c0a8f76f2638e3f3a76e01c68bc9ea (diff)
mac80211: cancel/restart all timers across suspend/resume
We forgot to cancel all timers in mac80211 when suspending. In particular we forgot to deal with some things that can cause hardware reconfiguration -- while it is down. While at it we go ahead and add a warning in ieee80211_sta_work() if its run while the suspend->resume cycle is in effect. This should not happen and if it does it would indicate there is a bug lurking in either mac80211 or mac80211 drivers. With this now wpa_supplicant doesn't blink when I go to suspend and resume where as before there where issues with some timers running during the suspend->resume cycle. This caused a lot of incorrect assumptions and would at times bring back the device in an incoherent, but mostly recoverable, state. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/mac80211/pm.c')
-rw-r--r--net/mac80211/pm.c80
1 files changed, 62 insertions, 18 deletions
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 9d3d89abbb57..7a549f9deb96 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -2,6 +2,7 @@
#include <net/rtnetlink.h>
#include "ieee80211_i.h"
+#include "mesh.h"
#include "driver-ops.h"
#include "led.h"
@@ -13,11 +14,30 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
struct sta_info *sta;
unsigned long flags;
+ ieee80211_scan_cancel(local);
+
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
+ /* flush out all packets */
+ synchronize_net();
+
+ local->quiescing = true;
+ /* make quiescing visible to timers everywhere */
+ mb();
+
flush_workqueue(local->hw.workqueue);
+ /* Don't try to run timers while suspended. */
+ del_timer_sync(&local->sta_cleanup);
+
+ /*
+ * Note that this particular timer doesn't need to be
+ * restarted at resume.
+ */
+ cancel_work_sync(&local->dynamic_ps_enable_work);
+ del_timer_sync(&local->dynamic_ps_timer);
+
/* disable keys */
list_for_each_entry(sdata, &local->interfaces, list)
ieee80211_disable_keys(sdata);
@@ -35,10 +55,20 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
rcu_read_unlock();
+ /* flush again, in case driver queued work */
+ flush_workqueue(local->hw.workqueue);
+
+ /* stop hardware - this must stop RX */
+ if (local->open_count) {
+ ieee80211_led_radio(local, false);
+ drv_stop(local);
+ }
+
/* remove STAs */
- if (local->ops->sta_notify) {
- spin_lock_irqsave(&local->sta_lock, flags);
- list_for_each_entry(sta, &local->sta_list, list) {
+ spin_lock_irqsave(&local->sta_lock, flags);
+ list_for_each_entry(sta, &local->sta_list, list) {
+ if (local->ops->sta_notify) {
+ sdata = sta->sdata;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
sdata = container_of(sdata->bss,
struct ieee80211_sub_if_data,
@@ -47,29 +77,43 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
&sta->sta);
}
- spin_unlock_irqrestore(&local->sta_lock, flags);
+
+ mesh_plink_quiesce(sta);
}
+ spin_unlock_irqrestore(&local->sta_lock, flags);
/* remove all interfaces */
list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_MONITOR &&
- netif_running(sdata->dev)) {
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->dev->dev_addr;
- drv_remove_interface(local, &conf);
+ switch(sdata->vif.type) {
+ case NL80211_IFTYPE_STATION:
+ ieee80211_sta_quiesce(sdata);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ ieee80211_ibss_quiesce(sdata);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ ieee80211_mesh_quiesce(sdata);
+ break;
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_MONITOR:
+ /* don't tell driver about this */
+ continue;
+ default:
+ break;
}
- }
- /* flush again, in case driver queued work */
- flush_workqueue(local->hw.workqueue);
+ if (!netif_running(sdata->dev))
+ continue;
- /* stop hardware */
- if (local->open_count) {
- ieee80211_led_radio(local, false);
- drv_stop(local);
+ conf.vif = &sdata->vif;
+ conf.type = sdata->vif.type;
+ conf.mac_addr = sdata->dev->dev_addr;
+ drv_remove_interface(local, &conf);
}
+
+ local->suspended = true;
+ local->quiescing = false;
+
return 0;
}