diff options
| author | Felipe Balbi <felipe.balbi@nokia.com> | 2008-08-08 12:40:54 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-08-13 17:33:01 -0700 |
| commit | ca6d1b1333bc2e61e37982de1f28d8604c232414 (patch) | |
| tree | 6675d284fc932e9125fc7fd083eebb7f0a1d5695 /include/linux/usb | |
| parent | f362a47560070ec0aaf68ac6b45901eeed1c844f (diff) | |
usb: musb: pass configuration specifics via pdata
Use platform_data to pass musb configuration-specific
details to musb driver.
This patch will prevent that other platforms selecting
HAVE_CLK and enabling musb won't break tree building.
The other parts of it will come when linux-omap merge
up more omap2/3 board-files.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/musb.h | 38 |
1 files changed, 33 insertions, 5 deletions
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d325a0d5bf4f..630962c04ca4 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -19,6 +19,36 @@ enum musb_mode { struct clk; +struct musb_hdrc_eps_bits { + const char name[16]; + u8 bits; +}; + +struct musb_hdrc_config { + /* MUSB configuration-specific details */ + unsigned multipoint:1; /* multipoint device */ + unsigned dyn_fifo:1; /* supports dynamic fifo sizing */ + unsigned soft_con:1; /* soft connect required */ + unsigned utm_16:1; /* utm data witdh is 16 bits */ + unsigned big_endian:1; /* true if CPU uses big-endian */ + unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ + unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ + unsigned high_iso_tx:1; /* Tx ep required for HB iso */ + unsigned high_iso_rx:1; /* Rx ep required for HD iso */ + unsigned dma:1; /* supports DMA */ + unsigned vendor_req:1; /* vendor registers required */ + + u8 num_eps; /* number of endpoints _with_ ep0 */ + u8 dma_channels; /* number of dma channels */ + u8 dyn_fifo_size; /* dynamic size in bytes */ + u8 vendor_ctrl; /* vendor control reg width */ + u8 vendor_stat; /* vendor status reg witdh */ + u8 dma_req_chan; /* bitmask for required dma channels */ + u8 ram_bits; /* ram address size */ + + struct musb_hdrc_eps_bits *eps_bits; +}; + struct musb_hdrc_platform_data { /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */ u8 mode; @@ -38,16 +68,14 @@ struct musb_hdrc_platform_data { /* (HOST or OTG) msec/2 after VBUS on till power good */ u8 potpgt; - /* TBD: chip defaults should probably go someplace else, - * e.g. number of tx/rx endpoints, etc - */ - unsigned multipoint:1; - /* Power the device on or off */ int (*set_power)(int state); /* Turn device clock on or off */ int (*set_clock)(struct clk *clock, int is_on); + + /* MUSB configuration-specific details */ + struct musb_hdrc_config *config; }; |