Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

1 files changed, 11 insertions, 7 deletions

diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 6bf9ef43ddb1..4da5bfa2147f 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -23,13 +23,16 @@ enum nand_io {
 };
 
 enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+	/* 1-bit  ECC calculation by GPMC, Error detection by Software */
+	OMAP_ECC_HAM1_CODE_HW = 0,
+	/* 4-bit  ECC calculation by GPMC, Error detection by Software */
+	OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
+	/* 4-bit  ECC calculation by GPMC, Error detection by ELM */
+	OMAP_ECC_BCH4_CODE_HW,
+	/* 8-bit  ECC calculation by GPMC, Error detection by Software */
+	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
+	/* 8-bit  ECC calculation by GPMC, Error detection by ELM */
+	OMAP_ECC_BCH8_CODE_HW,
 };
 
 struct gpmc_nand_regs {
@@ -63,5 +66,6 @@ struct omap_nand_platform_data {
 
 	/* for passing the partitions */
 	struct device_node	*of_node;
+	struct device_node	*elm_of_node;
 };
 #endif