[PATCH] Kconfig refactoring for better menu nesting

Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.

Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 31 insertions, 31 deletions

diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index c7fa28a28b9f..36c6a1bfe558 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -82,9 +82,6 @@ config PARPORT_PC_PCMCIA
 	  Say Y here if you need PCMCIA support for your PC-style parallel
 	  ports. If unsure, say N.
 
-config PARPORT_NOT_PC
-	bool
-
 config PARPORT_IP32
 	tristate "SGI IP32 builtin port (EXPERIMENTAL)"
 	depends on SGI_IP32 && PARPORT && EXPERIMENTAL
@@ -158,5 +155,8 @@ config PARPORT_1284
 	  transfer modes. Also say Y if you want device ID information to
 	  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
 
+config PARPORT_NOT_PC
+	bool
+
 endmenu
 
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 6e780db9454d..adce4204d87d 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -76,7 +76,8 @@ config HOTPLUG_PCI_IBM
 
 config HOTPLUG_PCI_ACPI
 	tristate "ACPI PCI Hotplug driver"
-	depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
+	depends on HOTPLUG_PCI
+	depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK)
 	help
 	  Say Y here if you have a system that supports PCI Hotplug using
 	  ACPI.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index fc12d5df10e2..0b36dd5cdac2 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS
 	  say N here to save some memory. You can also say Y if you have an
 	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
 
-config SERIAL_8250_SHARE_IRQ
-	bool "Support for sharing serial interrupts"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some serial boards have hardware support which allows multiple dumb
-	  serial ports on the same board to share a single IRQ. To enable
-	  support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
-	bool "Autodetect IRQ on standard ports (unsafe)"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Say Y here if you want the kernel to try to guess which IRQ
-	  to use for your serial port.
-
-	  This is considered unsafe; it is far better to configure the IRQ in
-	  a boot script using the setserial command.
-
-	  If unsure, say N.
-
-config SERIAL_8250_RSA
-	bool "Support RSA serial ports"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  ::: To be written :::
-
 #
 # Multi-port serial cards
 #
@@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_accent.
 
-
 config SERIAL_8250_BOCA
 	tristate "Support Boca cards"
 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -230,6 +203,32 @@ config SERIAL_8250_HUB6
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_hub6.
 
+config SERIAL_8250_SHARE_IRQ
+	bool "Support for sharing serial interrupts"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Some serial boards have hardware support which allows multiple dumb
+	  serial ports on the same board to share a single IRQ. To enable
+	  support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+	bool "Autodetect IRQ on standard ports (unsafe)"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Say Y here if you want the kernel to try to guess which IRQ
+	  to use for your serial port.
+
+	  This is considered unsafe; it is far better to configure the IRQ in
+	  a boot script using the setserial command.
+
+	  If unsure, say N.
+
+config SERIAL_8250_RSA
+	bool "Support RSA serial ports"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  ::: To be written :::
+
 config SERIAL_8250_MCA
 	tristate "Support 8250-type ports on MCA buses"
 	depends on SERIAL_8250 != n && MCA