diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-05-13 11:51:14 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-05-13 11:51:14 -0700 |
commit | ec94efcdadab69f41d257a1054260f8295ab77ef (patch) | |
tree | 6287158245d80fa79b6017787d0bd762bad89c96 /drivers | |
parent | 892c89d5d7ffd1bb794fe54d86c0eef18d215fab (diff) | |
parent | f0828ba96d02d4d4b197c531b34c662ee3c928df (diff) |
Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.
One core fix
* Set updated for a iio kfifo was incorrectly set to false during a failed
update, resulting in atttempts to repeat the failed operation appearing
to succeed.
This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.
* axp288_adc - a recent change added a check for valid info masks when
reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
causing a temperature of 0 to always be returned and incorrect presure
measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
remote CPUs. Fix an issue with the use of the power-up/power-down register
(basically wrong polarity). Fix an issue due to the missinterpretting the
return value from regulator_get_voltage. Add a delay before the start bit
as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
channel. Input checking for activity period to avoid rather unpredictable
results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
channel, incorrect scale on VREFP and incorrect sign on VREFN.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/accel/mma9551_core.c | 21 | ||||
-rw-r--r-- | drivers/iio/accel/mma9553.c | 18 | ||||
-rw-r--r-- | drivers/iio/accel/st_accel_core.c | 1 | ||||
-rw-r--r-- | drivers/iio/adc/axp288_adc.c | 12 | ||||
-rw-r--r-- | drivers/iio/adc/cc10001_adc.c | 60 | ||||
-rw-r--r-- | drivers/iio/adc/mcp320x.c | 6 | ||||
-rw-r--r-- | drivers/iio/adc/qcom-spmi-vadc.c | 7 | ||||
-rw-r--r-- | drivers/iio/adc/xilinx-xadc-core.c | 5 | ||||
-rw-r--r-- | drivers/iio/adc/xilinx-xadc.h | 6 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_core.c | 2 | ||||
-rw-r--r-- | drivers/iio/gyro/st_gyro_core.c | 1 | ||||
-rw-r--r-- | drivers/iio/kfifo_buf.c | 3 | ||||
-rw-r--r-- | drivers/iio/light/hid-sensor-prox.c | 12 | ||||
-rw-r--r-- | drivers/iio/magnetometer/st_magn_core.c | 1 | ||||
-rw-r--r-- | drivers/iio/pressure/bmp280.c | 1 | ||||
-rw-r--r-- | drivers/iio/pressure/hid-sensor-press.c | 2 | ||||
-rw-r--r-- | drivers/iio/pressure/st_pressure_core.c | 1 |
17 files changed, 93 insertions, 66 deletions
diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index 7f55a6d7cd03..c6d5a3a40b60 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -389,7 +389,12 @@ int mma9551_read_config_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, reg, NULL, 0, (u8 *) be_buf, len); @@ -424,7 +429,12 @@ int mma9551_read_status_words(struct i2c_client *client, u8 app_id, { int ret, i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, reg, NULL, 0, (u8 *) be_buf, len); @@ -459,7 +469,12 @@ int mma9551_write_config_words(struct i2c_client *client, u8 app_id, { int i; int len_words = len / sizeof(u16); - __be16 be_buf[MMA9551_MAX_MAILBOX_DATA_REGS]; + __be16 be_buf[(MMA9551_MAX_MAILBOX_DATA_REGS - 1) / 2]; + + if (len_words > ARRAY_SIZE(be_buf)) { + dev_err(&client->dev, "Invalid buffer size %d\n", len); + return -EINVAL; + } for (i = 0; i < len_words; i++) be_buf[i] = cpu_to_be16(buf[i]); diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index 2df1af7d43fc..365a109aaaef 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -54,6 +54,7 @@ #define MMA9553_MASK_CONF_STEPCOALESCE GENMASK(7, 0) #define MMA9553_REG_CONF_ACTTHD 0x0E +#define MMA9553_MAX_ACTTHD GENMASK(15, 0) /* Pedometer status registers (R-only) */ #define MMA9553_REG_STATUS 0x00 @@ -316,22 +317,19 @@ static int mma9553_set_config(struct mma9553_data *data, u16 reg, static int mma9553_read_activity_stepcnt(struct mma9553_data *data, u8 *activity, u16 *stepcnt) { - u32 status_stepcnt; - u16 status; + u16 buf[2]; int ret; ret = mma9551_read_status_words(data->client, MMA9551_APPID_PEDOMETER, - MMA9553_REG_STATUS, sizeof(u32), - (u16 *) &status_stepcnt); + MMA9553_REG_STATUS, sizeof(u32), buf); if (ret < 0) { dev_err(&data->client->dev, "error reading status and stepcnt\n"); return ret; } - status = status_stepcnt & MMA9553_MASK_CONF_WORD; - *activity = mma9553_get_bits(status, MMA9553_MASK_STATUS_ACTIVITY); - *stepcnt = status_stepcnt >> 16; + *activity = mma9553_get_bits(buf[0], MMA9553_MASK_STATUS_ACTIVITY); + *stepcnt = buf[1]; return 0; } @@ -872,6 +870,9 @@ static int mma9553_write_event_value(struct iio_dev *indio_dev, case IIO_EV_INFO_PERIOD: switch (chan->type) { case IIO_ACTIVITY: + if (val < 0 || val > MMA9553_ACTIVITY_THD_TO_SEC( + MMA9553_MAX_ACTTHD)) + return -EINVAL; mutex_lock(&data->mutex); ret = mma9553_set_config(data, MMA9553_REG_CONF_ACTTHD, &data->conf.actthd, @@ -971,7 +972,8 @@ static const struct iio_chan_spec_ext_info mma9553_ext_info[] = { .modified = 1, \ .channel2 = _chan2, \ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBHEIGHT) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ .event_spec = mma9553_activity_events, \ .num_event_specs = ARRAY_SIZE(mma9553_activity_events), \ .ext_info = mma9553_ext_info, \ diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 58d1d13d552a..211b13271c61 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -546,6 +546,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &accel_info; + mutex_init(&adata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 08bcfb061ca5..56008a86b78f 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = { .channel = 0, .address = AXP288_TS_ADC_H, .datasheet_name = "TS_PIN", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 1, .address = AXP288_PMIC_ADC_H, .datasheet_name = "PMIC_TEMP", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_TEMP, .channel = 2, .address = AXP288_GP_ADC_H, .datasheet_name = "GPADC", + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 3, .address = AXP20X_BATT_CHRG_I_H, .datasheet_name = "BATT_CHG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_CURRENT, .channel = 4, .address = AXP20X_BATT_DISCHRG_I_H, .datasheet_name = "BATT_DISCHRG_I", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, { .indexed = 1, .type = IIO_VOLTAGE, .channel = 5, .address = AXP20X_BATT_V_H, .datasheet_name = "BATT_V", - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }, }; @@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, chan->address)) dev_err(&indio_dev->dev, "TS pin restore\n"); break; - case IIO_CHAN_INFO_PROCESSED: - ret = axp288_adc_read_channel(val, chan->address, info->regmap); - break; default: ret = -EINVAL; } diff --git a/drivers/iio/adc/cc10001_adc.c b/drivers/iio/adc/cc10001_adc.c index 51e2a83c9404..115f6e99a7fa 100644 --- a/drivers/iio/adc/cc10001_adc.c +++ b/drivers/iio/adc/cc10001_adc.c @@ -35,8 +35,9 @@ #define CC10001_ADC_EOC_SET BIT(0) #define CC10001_ADC_CHSEL_SAMPLED 0x0c -#define CC10001_ADC_POWER_UP 0x10 -#define CC10001_ADC_POWER_UP_SET BIT(0) +#define CC10001_ADC_POWER_DOWN 0x10 +#define CC10001_ADC_POWER_DOWN_SET BIT(0) + #define CC10001_ADC_DEBUG 0x14 #define CC10001_ADC_DATA_COUNT 0x20 @@ -62,7 +63,6 @@ struct cc10001_adc_device { u16 *buf; struct mutex lock; - unsigned long channel_map; unsigned int start_delay_ns; unsigned int eoc_delay_ns; }; @@ -79,6 +79,18 @@ static inline u32 cc10001_adc_read_reg(struct cc10001_adc_device *adc_dev, return readl(adc_dev->reg_base + reg); } +static void cc10001_adc_power_up(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, 0); + ndelay(adc_dev->start_delay_ns); +} + +static void cc10001_adc_power_down(struct cc10001_adc_device *adc_dev) +{ + cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_DOWN, + CC10001_ADC_POWER_DOWN_SET); +} + static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, unsigned int channel) { @@ -88,6 +100,7 @@ static void cc10001_adc_start(struct cc10001_adc_device *adc_dev, val = (channel & CC10001_ADC_CH_MASK) | CC10001_ADC_MODE_SINGLE_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); + udelay(1); val = cc10001_adc_read_reg(adc_dev, CC10001_ADC_CONFIG); val = val | CC10001_ADC_START_CONV; cc10001_adc_write_reg(adc_dev, CC10001_ADC_CONFIG, val); @@ -129,6 +142,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) struct iio_dev *indio_dev; unsigned int delay_ns; unsigned int channel; + unsigned int scan_idx; bool sample_invalid; u16 *data; int i; @@ -139,20 +153,17 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) mutex_lock(&adc_dev->lock); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; i = 0; sample_invalid = false; - for_each_set_bit(channel, indio_dev->active_scan_mask, + for_each_set_bit(scan_idx, indio_dev->active_scan_mask, indio_dev->masklength) { + channel = indio_dev->channels[scan_idx].channel; cc10001_adc_start(adc_dev, channel); data[i] = cc10001_adc_poll_done(indio_dev, channel, delay_ns); @@ -166,7 +177,7 @@ static irqreturn_t cc10001_adc_trigger_h(int irq, void *p) } done: - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); mutex_unlock(&adc_dev->lock); @@ -185,11 +196,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, unsigned int delay_ns; u16 val; - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, - CC10001_ADC_POWER_UP_SET); - - /* Wait for 8 (6+2) clock cycles before activating START */ - ndelay(adc_dev->start_delay_ns); + cc10001_adc_power_up(adc_dev); /* Calculate delay step for eoc and sampled data */ delay_ns = adc_dev->eoc_delay_ns / CC10001_MAX_POLL_COUNT; @@ -198,7 +205,7 @@ static u16 cc10001_adc_read_raw_voltage(struct iio_dev *indio_dev, val = cc10001_adc_poll_done(indio_dev, chan->channel, delay_ns); - cc10001_adc_write_reg(adc_dev, CC10001_ADC_POWER_UP, 0); + cc10001_adc_power_down(adc_dev); return val; } @@ -224,7 +231,7 @@ static int cc10001_adc_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: ret = regulator_get_voltage(adc_dev->reg); - if (ret) + if (ret < 0) return ret; *val = ret / 1000; @@ -255,22 +262,22 @@ static const struct iio_info cc10001_adc_info = { .update_scan_mode = &cc10001_update_scan_mode, }; -static int cc10001_adc_channel_init(struct iio_dev *indio_dev) +static int cc10001_adc_channel_init(struct iio_dev *indio_dev, + unsigned long channel_map) { - struct cc10001_adc_device *adc_dev = iio_priv(indio_dev); struct iio_chan_spec *chan_array, *timestamp; unsigned int bit, idx = 0; - indio_dev->num_channels = bitmap_weight(&adc_dev->channel_map, - CC10001_ADC_NUM_CHANNELS); + indio_dev->num_channels = bitmap_weight(&channel_map, + CC10001_ADC_NUM_CHANNELS) + 1; - chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels + 1, + chan_array = devm_kcalloc(&indio_dev->dev, indio_dev->num_channels, sizeof(struct iio_chan_spec), GFP_KERNEL); if (!chan_array) return -ENOMEM; - for_each_set_bit(bit, &adc_dev->channel_map, CC10001_ADC_NUM_CHANNELS) { + for_each_set_bit(bit, &channel_map, CC10001_ADC_NUM_CHANNELS) { struct iio_chan_spec *chan = &chan_array[idx]; chan->type = IIO_VOLTAGE; @@ -305,6 +312,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) unsigned long adc_clk_rate; struct resource *res; struct iio_dev *indio_dev; + unsigned long channel_map; int ret; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev)); @@ -313,9 +321,9 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev = iio_priv(indio_dev); - adc_dev->channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); + channel_map = GENMASK(CC10001_ADC_NUM_CHANNELS - 1, 0); if (!of_property_read_u32(node, "adc-reserved-channels", &ret)) - adc_dev->channel_map &= ~ret; + channel_map &= ~ret; adc_dev->reg = devm_regulator_get(&pdev->dev, "vref"); if (IS_ERR(adc_dev->reg)) @@ -361,7 +369,7 @@ static int cc10001_adc_probe(struct platform_device *pdev) adc_dev->start_delay_ns = adc_dev->eoc_delay_ns * CC10001_WAIT_CYCLES; /* Setup the ADC channels available on the device */ - ret = cc10001_adc_channel_init(indio_dev); + ret = cc10001_adc_channel_init(indio_dev, channel_map); if (ret < 0) goto err_disable_clk; diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index efbfd12a4bfd..8d9c9b9215dd 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -60,12 +60,12 @@ struct mcp320x { struct spi_message msg; struct spi_transfer transfer[2]; - u8 tx_buf; - u8 rx_buf[2]; - struct regulator *reg; struct mutex lock; const struct mcp320x_chip_info *chip_info; + + u8 tx_buf ____cacheline_aligned; + u8 rx_buf[2]; }; static int mcp320x_channel_to_tx_data(int device_index, diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c index 3211729bcb0b..0c4618b4d515 100644 --- a/drivers/iio/adc/qcom-spmi-vadc.c +++ b/drivers/iio/adc/qcom-spmi-vadc.c @@ -18,6 +18,7 @@ #include <linux/iio/iio.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, const struct vadc_channel_prop *prop, u16 adc_code) { const struct vadc_prescale_ratio *prescale; - s32 voltage; + s64 voltage; voltage = adc_code - vadc->graph[prop->calibration].gnd; voltage *= vadc->graph[prop->calibration].dx; - voltage = voltage / vadc->graph[prop->calibration].dy; + voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy); if (prop->calibration == VADC_CALIB_ABSOLUTE) voltage += vadc->graph[prop->calibration].dx; @@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc, voltage = voltage * prescale->den; - return voltage / prescale->num; + return div64_s64(voltage, prescale->num); } static int vadc_decimation_from_dt(u32 value) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index a221f7329b79..ce93bd8e3f68 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -856,6 +856,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev, switch (chan->address) { case XADC_REG_VCCINT: case XADC_REG_VCCAUX: + case XADC_REG_VREFP: case XADC_REG_VCCBRAM: case XADC_REG_VCCPINT: case XADC_REG_VCCPAUX: @@ -996,7 +997,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { .num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \ .scan_index = (_scan_index), \ .scan_type = { \ - .sign = 'u', \ + .sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \ .realbits = 12, \ .storagebits = 16, \ .shift = 4, \ @@ -1008,7 +1009,7 @@ static const struct iio_event_spec xadc_voltage_events[] = { static const struct iio_chan_spec xadc_channels[] = { XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP), XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true), - XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true), + XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true), XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true), XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true), XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true), diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h index c7487e8d7f80..54adc5087210 100644 --- a/drivers/iio/adc/xilinx-xadc.h +++ b/drivers/iio/adc/xilinx-xadc.h @@ -145,9 +145,9 @@ static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg, #define XADC_REG_MAX_VCCPINT 0x28 #define XADC_REG_MAX_VCCPAUX 0x29 #define XADC_REG_MAX_VCCO_DDR 0x2a -#define XADC_REG_MIN_VCCPINT 0x2b -#define XADC_REG_MIN_VCCPAUX 0x2c -#define XADC_REG_MIN_VCCO_DDR 0x2d +#define XADC_REG_MIN_VCCPINT 0x2c +#define XADC_REG_MIN_VCCPAUX 0x2d +#define XADC_REG_MIN_VCCO_DDR 0x2e #define XADC_REG_CONF0 0x40 #define XADC_REG_CONF1 0x41 diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index edd13d2b4121..8dd0477e201c 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -304,8 +304,6 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, struct st_sensors_platform_data *of_pdata; int err = 0; - mutex_init(&sdata->tb.buf_lock); - /* If OF/DT pdata exists, it will take precedence of anything else */ of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata); if (of_pdata) diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 21395f26d227..ffe96642b6d0 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -400,6 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &gyro_info; + mutex_init(&gdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c index 847ca561afe0..55c267bbfd2f 100644 --- a/drivers/iio/kfifo_buf.c +++ b/drivers/iio/kfifo_buf.c @@ -38,7 +38,8 @@ static int iio_request_update_kfifo(struct iio_buffer *r) kfifo_free(&buf->kf); ret = __iio_allocate_kfifo(buf, buf->buffer.bytes_per_datum, buf->buffer.length); - buf->update_needed = false; + if (ret >= 0) + buf->update_needed = false; } else { kfifo_reset_out(&buf->kf); } diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 91ecc46ffeaa..ef60bae738e3 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -43,8 +43,6 @@ struct prox_state { static const struct iio_chan_spec prox_channels[] = { { .type = IIO_PROXIMITY, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | @@ -253,7 +251,6 @@ static int hid_prox_probe(struct platform_device *pdev) struct iio_dev *indio_dev; struct prox_state *prox_state; struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; - struct iio_chan_spec *channels; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct prox_state)); @@ -272,20 +269,21 @@ static int hid_prox_probe(struct platform_device *pdev) return ret; } - channels = kmemdup(prox_channels, sizeof(prox_channels), GFP_KERNEL); - if (!channels) { + indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels), + GFP_KERNEL); + if (!indio_dev->channels) { dev_err(&pdev->dev, "failed to duplicate channels\n"); return -ENOMEM; } - ret = prox_parse_report(pdev, hsdev, channels, + ret = prox_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, HID_USAGE_SENSOR_PROX, prox_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); goto error_free_dev_mem; } - indio_dev->channels = channels; indio_dev->num_channels = ARRAY_SIZE(prox_channels); indio_dev->dev.parent = &pdev->dev; diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 8ade473f99fe..2e56f812a644 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -369,6 +369,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &magn_info; + mutex_init(&mdata->tb.buf_lock); st_sensors_power_enable(indio_dev); diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 7c623e2bd633..a2602d8dd6d5 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -172,6 +172,7 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) * ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) * ((s32)(s16)le16_to_cpu(buf[T3]))) >> 14; + data->t_fine = var1 + var2; return (data->t_fine * 5 + 128) >> 8; } diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 7bb8d4c1f7df..3cf0bd67d24c 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -47,8 +47,6 @@ struct press_state { static const struct iio_chan_spec press_channels[] = { { .type = IIO_PRESSURE, - .modified = 1, - .channel2 = IIO_NO_MOD, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE) | diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 97baf40d424b..e881fa6291e9 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -417,6 +417,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &press_info; + mutex_init(&press_data->tb.buf_lock); st_sensors_power_enable(indio_dev); |