watchdog: it87_wdt: Add support for watchdogs with 8b timers

This patch adds support for watchdogs with 8b timers, like ones in
IT8702F and older revisions of IT8712F Super IO chip, to it87_wdt
driver. This patch should be used after the patch
'it87_wdt: Add support for IT8720F watchdog'.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1 files changed, 58 insertions, 23 deletions

diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index 455de7714618..dad29245a6a7 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -12,7 +12,7 @@
  *		    http://www.ite.com.tw/
  *
  *	Support of the watchdog timers, which are available on
- *	IT8716, IT8718, IT8720, IT8726 and IT8712 (J,K version).
+ *	IT8702, IT8712, IT8716, IT8718, IT8720 and IT8726.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -76,6 +76,7 @@
 
 /* Chip Id numbers */
 #define NO_DEV_ID	0xffff
+#define IT8702_ID	0x8702
 #define IT8705_ID	0x8705
 #define IT8712_ID	0x8712
 #define IT8716_ID	0x8716
@@ -133,7 +134,7 @@
 #define WDTS_USE_GP	4
 #define WDTS_EXPECTED	5
 
-static	unsigned int base, gpact, ciract;
+static	unsigned int base, gpact, ciract, max_units;
 static	unsigned long wdt_status;
 static	DEFINE_SPINLOCK(spinlock);
 
@@ -211,6 +212,33 @@ static inline void superio_outw(int val, int reg)
 	outb(val, VAL);
 }
 
+/* Internal function, should be called after superio_select(GPIO) */
+static void wdt_update_timeout(void)
+{
+	unsigned char cfg = WDT_KRST | WDT_PWROK;
+	int tm = timeout;
+
+	if (testmode)
+		cfg = 0;
+
+	if (tm <= max_units)
+		cfg |= WDT_TOV1;
+	else
+		tm /= 60;
+
+	superio_outb(cfg, WDTCFG);
+	superio_outb(tm, WDTVALLSB);
+	if (max_units > 255)
+		superio_outb(tm>>8, WDTVALMSB);
+}
+
+static int wdt_round_time(int t)
+{
+	t += 59;
+	t -= t % 60;
+	return t;
+}
+
 /* watchdog timer handling */
 
 static void wdt_keepalive(void)
@@ -235,12 +263,7 @@ static void wdt_start(void)
 		superio_outb(WDT_GAMEPORT, WDTCTRL);
 	else
 		superio_outb(WDT_CIRINT, WDTCTRL);
-	if (!testmode)
-		superio_outb(WDT_TOV1 | WDT_KRST | WDT_PWROK, WDTCFG);
-	else
-		superio_outb(WDT_TOV1, WDTCFG);
-	superio_outb(timeout>>8, WDTVALMSB);
-	superio_outb(timeout, WDTVALLSB);
+	wdt_update_timeout();
 
 	superio_exit();
 	spin_unlock_irqrestore(&spinlock, flags);
@@ -256,8 +279,9 @@ static void wdt_stop(void)
 	superio_select(GPIO);
 	superio_outb(0x00, WDTCTRL);
 	superio_outb(WDT_TOV1, WDTCFG);
-	superio_outb(0x00, WDTVALMSB);
 	superio_outb(0x00, WDTVALLSB);
+	if (max_units > 255)
+		superio_outb(0x00, WDTVALMSB);
 
 	superio_exit();
 	spin_unlock_irqrestore(&spinlock, flags);
@@ -267,8 +291,8 @@ static void wdt_stop(void)
  *	wdt_set_timeout - set a new timeout value with watchdog ioctl
  *	@t: timeout value in seconds
  *
- *	The hardware device has a 16 bit watchdog timer, thus the
- *	timeout time ranges between 1 and 65535 seconds.
+ *	The hardware device has a 8 or 16 bit watchdog timer (depends on
+ *	chip version) that can be configured to count seconds or minutes.
  *
  *	Used within WDIOC_SETTIMEOUT watchdog device ioctl.
  */
@@ -277,19 +301,19 @@ static int wdt_set_timeout(int t)
 {
 	unsigned long flags;
 
-	if (t < 1 || t > 65535)
+	if (t < 1 || t > max_units * 60)
 		return -EINVAL;
 
-	timeout = t;
+	if (t > max_units)
+		timeout = wdt_round_time(t);
+	else
+		timeout = t;
 
 	spin_lock_irqsave(&spinlock, flags);
 	if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
 		superio_enter();
-
 		superio_select(GPIO);
-		superio_outb(t>>8, WDTVALMSB);
-		superio_outb(t, WDTVALLSB);
-
+		wdt_update_timeout();
 		superio_exit();
 	}
 	spin_unlock_irqrestore(&spinlock, flags);
@@ -535,6 +559,8 @@ static int __init it87_wdt_init(void)
 	u8  chip_rev;
 	unsigned long flags;
 
+	wdt_status = 0;
+
 	spin_lock_irqsave(&spinlock, flags);
 	superio_enter();
 	chip_type = superio_inw(CHIPID);
@@ -543,16 +569,21 @@ static int __init it87_wdt_init(void)
 	spin_unlock_irqrestore(&spinlock, flags);
 
 	switch (chip_type) {
+	case IT8702_ID:
+		max_units = 255;
+		break;
+	case IT8712_ID:
+		max_units = (chip_rev < 8) ? 255 : 65535;
+		break;
 	case IT8716_ID:
 	case IT8726_ID:
+		max_units = 65535;
 		break;
 	case IT8718_ID:
 	case IT8720_ID:
+		max_units = 65535;
 		try_gameport = 0;
 		break;
-	case IT8712_ID:
-		if (chip_rev > 7)
-			break;
 	case IT8705_ID:
 		printk(KERN_ERR PFX
 		       "Unsupported Chip found, Chip %04x Revision %02x\n",
@@ -628,13 +659,16 @@ static int __init it87_wdt_init(void)
 		spin_unlock_irqrestore(&spinlock, flags);
 	}
 
-	if (timeout < 1 || timeout > 65535) {
+	if (timeout < 1 || timeout > max_units * 60) {
 		timeout = DEFAULT_TIMEOUT;
 		printk(KERN_WARNING PFX
 		       "Timeout value out of range, use default %d sec\n",
 		       DEFAULT_TIMEOUT);
 	}
 
+	if (timeout > max_units)
+		timeout = wdt_round_time(timeout);
+
 	rc = register_reboot_notifier(&wdt_notifier);
 	if (rc) {
 		printk(KERN_ERR PFX
@@ -661,7 +695,7 @@ static int __init it87_wdt_init(void)
 		outb(0x09, CIR_IER(base));
 	}
 
-	printk(KERN_INFO PFX "Chip it%04x revision %d initialized. "
+	printk(KERN_INFO PFX "Chip IT%04x revision %d initialized. "
 		"timeout=%d sec (nowayout=%d testmode=%d exclusive=%d "
 		"nogameport=%d)\n", chip_type, chip_rev, timeout,
 		nowayout, testmode, exclusive, nogameport);
@@ -703,8 +737,9 @@ static void __exit it87_wdt_exit(void)
 	superio_select(GPIO);
 	superio_outb(0x00, WDTCTRL);
 	superio_outb(0x00, WDTCFG);
-	superio_outb(0x00, WDTVALMSB);
 	superio_outb(0x00, WDTVALLSB);
+	if (max_units > 255)
+		superio_outb(0x00, WDTVALMSB);
 	if (test_bit(WDTS_USE_GP, &wdt_status)) {
 		superio_select(GAMEPORT);
 		superio_outb(gpact, ACTREG);