Merge tag 'asoc-fix-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linussound-4.10-rc4

ASoC: Fixes for v4.10

As well as the usual smattering of driver specific fixes collected since
the merge window this has one particularly important fix to the core for
handling of aux_devs which was broken during the merge window by some of
the componentization refactoring.

45 files changed, 549 insertions, 316 deletions

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 0aa9e7d697a5..25dbd8c7aec7 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -239,6 +239,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	if (ifp->desc.bNumEndpoints >= num_ep)
 		goto skip_to_next_endpoint_or_interface_descriptor;
 
+	/* Check for duplicate endpoint addresses */
+	for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+		if (ifp->endpoint[i].desc.bEndpointAddress ==
+		    d->bEndpointAddress) {
+			dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+			    cfgno, inum, asnum, d->bEndpointAddress);
+			goto skip_to_next_endpoint_or_interface_descriptor;
+		}
+	}
+
 	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
 	++ifp->desc.bNumEndpoints;
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1fa5c0f29c64..a56c75e09786 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
-					  struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
@@ -903,34 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
 }
 
 /*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
-	struct usb_port *port_dev = hub->ports[port1 - 1];
-	struct usb_device *hdev = hub->hdev;
-	int ret = 0;
-
-	if (!hub->error) {
-		if (hub_is_superspeed(hub->hdev)) {
-			hub_usb3_port_prepare_disable(hub, port_dev);
-			ret = hub_set_port_link_state(hub, port_dev->portnum,
-						      USB_SS_PORT_LS_U3);
-		} else {
-			ret = usb_clear_port_feature(hdev, port1,
-					USB_PORT_FEAT_ENABLE);
-		}
-	}
-	if (port_dev->child && set_state)
-		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
-	if (ret && ret != -ENODEV)
-		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
-	return ret;
-}
-
-/*
  * Disable a port and mark a logical connect-change event, so that some
  * time later hub_wq will disconnect() any existing usb_device on the port
  * and will re-enumerate if there actually is a device attached.
@@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
 
 #endif	/* CONFIG_PM */
 
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+	int ret = 0;
+
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev)) {
+			hub_usb3_port_prepare_disable(hub, port_dev);
+			ret = hub_set_port_link_state(hub, port_dev->portnum,
+						      USB_SS_PORT_LS_U3);
+		} else {
+			ret = usb_clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+		}
+	}
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+	if (ret && ret != -ENODEV)
+		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+	return ret;
+}
+
 
 /* USB 2.0 spec, 7.1.7.3 / fig 7-29:
  *
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index b95930f20d90..c55db4aa54d6 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3753,7 +3753,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 		hs_ep->desc_list = dma_alloc_coherent(hsotg->dev,
 			MAX_DMA_DESC_NUM_GENERIC *
 			sizeof(struct dwc2_dma_desc),
-			&hs_ep->desc_list_dma, GFP_KERNEL);
+			&hs_ep->desc_list_dma, GFP_ATOMIC);
 		if (!hs_ep->desc_list) {
 			ret = -ENOMEM;
 			goto error2;
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a786256535b6..11fe68a4627b 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -247,8 +247,6 @@ MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
 static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
 				     char *property, u8 size, u64 *value)
 {
-	u8 val8;
-	u16 val16;
 	u32 val32;
 
 	switch (size) {
@@ -256,17 +254,7 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
 		*value = device_property_read_bool(hsotg->dev, property);
 		break;
 	case 1:
-		if (device_property_read_u8(hsotg->dev, property, &val8))
-			return;
-
-		*value = val8;
-		break;
 	case 2:
-		if (device_property_read_u16(hsotg->dev, property, &val16))
-			return;
-
-		*value = val16;
-		break;
 	case 4:
 		if (device_property_read_u32(hsotg->dev, property, &val32))
 			return;
@@ -1100,13 +1088,13 @@ static void dwc2_set_gadget_dma(struct dwc2_hsotg *hsotg)
 	/* Buffer DMA */
 	dwc2_set_param_bool(hsotg, &p->g_dma,
 			    false, "gadget-dma",
-			    true, false,
+			    dma_capable, false,
 			    dma_capable);
 
 	/* DMA Descriptor */
 	dwc2_set_param_bool(hsotg, &p->g_dma_desc, false,
 			    "gadget-dma-desc",
-			    p->g_dma, false,
+			    !!hw->dma_desc_enable, false,
 			    !!hw->dma_desc_enable);
 }
 
@@ -1130,8 +1118,14 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 
 		dwc2_set_param_bool(hsotg, &p->host_dma,
 				    false, "host-dma",
-				    true, false,
+				    dma_capable, false,
 				    dma_capable);
+		dwc2_set_param_host_rx_fifo_size(hsotg,
+				params->host_rx_fifo_size);
+		dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+				params->host_nperio_tx_fifo_size);
+		dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+				params->host_perio_tx_fifo_size);
 	}
 	dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
 	dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
@@ -1140,12 +1134,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 			params->host_support_fs_ls_low_power);
 	dwc2_set_param_enable_dynamic_fifo(hsotg,
 			params->enable_dynamic_fifo);
-	dwc2_set_param_host_rx_fifo_size(hsotg,
-			params->host_rx_fifo_size);
-	dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
-			params->host_nperio_tx_fifo_size);
-	dwc2_set_param_host_perio_tx_fifo_size(hsotg,
-			params->host_perio_tx_fifo_size);
 	dwc2_set_param_max_transfer_size(hsotg,
 			params->max_transfer_size);
 	dwc2_set_param_max_packet_count(hsotg,
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index de5a8570be04..14b760209680 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -45,9 +45,7 @@
 #define DWC3_XHCI_RESOURCES_NUM	2
 
 #define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE		4	/* bytes */
-#define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE	4096
 #define DWC3_EVENT_TYPE_MASK	0xfe
 
 #define DWC3_EVENT_TYPE_DEV	0
@@ -311,9 +309,8 @@
 #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0)  /* DWC_usb31 only */
 #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 #define DWC3_DCFG_HIGHSPEED	(0 << 0)
-#define DWC3_DCFG_FULLSPEED2	(1 << 0)
+#define DWC3_DCFG_FULLSPEED	(1 << 0)
 #define DWC3_DCFG_LOWSPEED	(2 << 0)
-#define DWC3_DCFG_FULLSPEED1	(3 << 0)
 
 #define DWC3_DCFG_NUMP_SHIFT	17
 #define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
@@ -405,9 +402,8 @@
 #define DWC3_DSTS_SUPERSPEED_PLUS	(5 << 0) /* DWC_usb31 only */
 #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 #define DWC3_DSTS_HIGHSPEED		(0 << 0)
-#define DWC3_DSTS_FULLSPEED2		(1 << 0)
+#define DWC3_DSTS_FULLSPEED		(1 << 0)
 #define DWC3_DSTS_LOWSPEED		(2 << 0)
-#define DWC3_DSTS_FULLSPEED1		(3 << 0)
 
 /* Device Generic Command Register */
 #define DWC3_DGCMD_SET_LMP		0x01
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 29e80cc9b634..eb1b9cb3f9d1 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
@@ -510,7 +511,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+	irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
 	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
 					dwc3_omap_interrupt_thread, IRQF_SHARED,
 					"dwc3-omap", omap);
@@ -531,7 +532,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	dwc3_omap_enable_irqs(omap);
-
+	enable_irq(omap->irq);
 	return 0;
 
 err2:
@@ -552,6 +553,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
 	extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
 	dwc3_omap_disable_irqs(omap);
+	disable_irq(omap->irq);
 	of_platform_depopulate(omap->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 2b73339f286b..cce0a220b6b0 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -38,6 +38,7 @@
 #define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
 #define PCI_DEVICE_ID_INTEL_APL			0x5aaa
 #define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK			0x31aa
 
 #define PCI_INTEL_BXT_DSM_UUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
 #define PCI_INTEL_BXT_FUNC_PMU_PWR	4
@@ -73,16 +74,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 {
 	struct platform_device		*dwc3 = dwc->dwc3;
 	struct pci_dev			*pdev = dwc->pci;
-	int				ret;
-
-	struct property_entry sysdev_property[] = {
-		PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
-		{ },
-	};
-
-	ret = platform_device_add_properties(dwc3, sysdev_property);
-	if (ret)
-		return ret;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
@@ -105,6 +96,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -115,7 +107,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 		int ret;
 
 		struct property_entry properties[] = {
-			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+			PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ }
 		};
 
@@ -167,6 +160,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
 			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
 			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -274,6 +268,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
 	{  }	/* Terminating Entry */
 };
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4878d187c7d4..9bb1f8526f3e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -39,18 +39,13 @@ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		struct dwc3_ep *dep, struct dwc3_request *req);
 
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
-		u32 len, u32 type, bool chain)
+static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
+		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
 {
-	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_trb			*trb;
 	struct dwc3_ep			*dep;
 
-	int				ret;
-
 	dep = dwc->eps[epnum];
-	if (dep->flags & DWC3_EP_BUSY)
-		return 0;
 
 	trb = &dwc->ep0_trb[dep->trb_enqueue];
 
@@ -71,15 +66,23 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 		trb->ctrl |= (DWC3_TRB_CTRL_IOC
 				| DWC3_TRB_CTRL_LST);
 
-	if (chain)
+	trace_dwc3_prepare_trb(dep, trb);
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_ep			*dep;
+	int				ret;
+
+	dep = dwc->eps[epnum];
+	if (dep->flags & DWC3_EP_BUSY)
 		return 0;
 
 	memset(&params, 0, sizeof(params));
 	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
 	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
 
-	trace_dwc3_prepare_trb(dep, trb);
-
 	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0)
 		return ret;
@@ -280,8 +283,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
 
 	complete(&dwc->ep0_in_setup);
 
-	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+	dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
 			DWC3_TRBCTL_CONTROL_SETUP, false);
+	ret = dwc3_ep0_start_trans(dwc, 0);
 	WARN_ON(ret < 0);
 }
 
@@ -912,9 +916,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 			dwc->ep0_next_event = DWC3_EP0_COMPLETE;
 
-			ret = dwc3_ep0_start_trans(dwc, epnum,
-					dwc->ctrl_req_addr, 0,
-					DWC3_TRBCTL_CONTROL_DATA, false);
+			dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
+					0, DWC3_TRBCTL_CONTROL_DATA, false);
+			ret = dwc3_ep0_start_trans(dwc, epnum);
 			WARN_ON(ret < 0);
 		}
 	}
@@ -993,9 +997,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 	req->direction = !!dep->number;
 
 	if (req->request.length == 0) {
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ctrl_req_addr, 0,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
 		u32	transfer_size = 0;
@@ -1011,7 +1016,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
 			transfer_size = ALIGN(req->request.length - maxpacket,
 					      maxpacket);
-			ret = dwc3_ep0_start_trans(dwc, dep->number,
+			dwc3_ep0_prepare_one_trb(dwc, dep->number,
 						   req->request.dma,
 						   transfer_size,
 						   DWC3_TRBCTL_CONTROL_DATA,
@@ -1023,18 +1028,20 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
 		dwc->ep0_bounced = true;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ep0_bounce_addr, transfer_size,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else {
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
 		if (ret)
 			return;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	}
 
 	WARN_ON(ret < 0);
@@ -1048,8 +1055,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
 	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
 		: DWC3_TRBCTL_CONTROL_STATUS2;
 
-	return dwc3_ep0_start_trans(dwc, dep->number,
+	dwc3_ep0_prepare_one_trb(dwc, dep->number,
 			dwc->ctrl_req_addr, 0, type, false);
+	return dwc3_ep0_start_trans(dwc, dep->number);
 }
 
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index efddaf5d11d1..204c754cc647 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -180,11 +180,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 
-	if (dwc->ep0_bounced && dep->number == 0)
+	if (dwc->ep0_bounced && dep->number <= 1)
 		dwc->ep0_bounced = false;
-	else
-		usb_gadget_unmap_request_by_dev(dwc->sysdev,
-				&req->request, req->direction);
+
+	usb_gadget_unmap_request_by_dev(dwc->sysdev,
+			&req->request, req->direction);
 
 	trace_dwc3_gadget_giveback(req);
 
@@ -1720,7 +1720,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
 			reg |= DWC3_DCFG_LOWSPEED;
 			break;
 		case USB_SPEED_FULL:
-			reg |= DWC3_DCFG_FULLSPEED1;
+			reg |= DWC3_DCFG_FULLSPEED;
 			break;
 		case USB_SPEED_HIGH:
 			reg |= DWC3_DCFG_HIGHSPEED;
@@ -2232,9 +2232,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
 	dep = dwc->eps[epnum];
 
-	if (!(dep->flags & DWC3_EP_ENABLED) &&
-	    !(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
-		return;
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+			return;
+
+		/* Handle only EPCMDCMPLT when EP disabled */
+		if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
+			return;
+	}
 
 	if (epnum == 0 || epnum == 1) {
 		dwc3_ep0_interrupt(dwc, event);
@@ -2531,8 +2536,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_HIGH;
 		break;
-	case DWC3_DSTS_FULLSPEED2:
-	case DWC3_DSTS_FULLSPEED1:
+	case DWC3_DSTS_FULLSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_FULL;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 41ab61f9b6e0..002822d98fda 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1694,9 +1694,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		value = min(w_length, (u16) 1);
 		break;
 
-	/* function drivers must handle get/set altsetting; if there's
-	 * no get() method, we know only altsetting zero works.
-	 */
+	/* function drivers must handle get/set altsetting */
 	case USB_REQ_SET_INTERFACE:
 		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
 			goto unknown;
@@ -1705,7 +1703,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		f = cdev->config->interface[intf];
 		if (!f)
 			break;
-		if (w_value && !f->set_alt)
+
+		/*
+		 * If there's no get_alt() method, we know only altsetting zero
+		 * works. There is no need to check if set_alt() is not NULL
+		 * as we check this in usb_add_function().
+		 */
+		if (w_value && !f->get_alt)
 			break;
 		value = f->set_alt(f, w_index, w_value);
 		if (value == USB_GADGET_DELAYED_STATUS) {
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index aab3fc1dbb94..5e746adc8a2d 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2091,8 +2091,8 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 
 	case FFS_STRING:
 		/*
-		 * Strings are indexed from 1 (0 is magic ;) reserved
-		 * for languages list or some such)
+		 * Strings are indexed from 1 (0 is reserved
+		 * for languages list)
 		 */
 		if (*valuep > helper->ffs->strings_count)
 			helper->ffs->strings_count = *valuep;
@@ -2252,7 +2252,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    !d->Reserved1)
+		    d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])
@@ -3666,6 +3666,7 @@ static void ffs_closed(struct ffs_data *ffs)
 {
 	struct ffs_dev *ffs_obj;
 	struct f_fs_opts *opts;
+	struct config_item *ci;
 
 	ENTER();
 	ffs_dev_lock();
@@ -3689,8 +3690,11 @@ static void ffs_closed(struct ffs_data *ffs)
 	    || !atomic_read(&opts->func_inst.group.cg_item.ci_kref.refcount))
 		goto done;
 
-	unregister_gadget_item(ffs_obj->opts->
-			       func_inst.group.cg_item.ci_parent->ci_parent);
+	ci = opts->func_inst.group.cg_item.ci_parent->ci_parent;
+	ffs_dev_unlock();
+
+	unregister_gadget_item(ci);
+	return;
 done:
 	ffs_dev_unlock();
 }
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3151d2a0fe59..5f8139b8e601 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -593,7 +593,7 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		}
 		status = usb_ep_enable(hidg->out_ep);
 		if (status < 0) {
-			ERROR(cdev, "Enable IN endpoint FAILED!\n");
+			ERROR(cdev, "Enable OUT endpoint FAILED!\n");
 			goto fail;
 		}
 		hidg->out_ep->driver_data = hidg;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e8f4102d19df..6bde4396927c 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1126,7 +1126,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	/* data and/or status stage for control request */
 	} else if (dev->state == STATE_DEV_SETUP) {
 
-		/* IN DATA+STATUS caller makes len <= wLength */
+		len = min_t(size_t, len, dev->setup_wLength);
 		if (dev->setup_in) {
 			retval = setup_req (dev->gadget->ep0, dev->req, len);
 			if (retval == 0) {
@@ -1734,10 +1734,12 @@ static struct usb_gadget_driver gadgetfs_driver = {
  * such as configuration notifications.
  */
 
-static int is_valid_config (struct usb_config_descriptor *config)
+static int is_valid_config(struct usb_config_descriptor *config,
+		unsigned int total)
 {
 	return config->bDescriptorType == USB_DT_CONFIG
 		&& config->bLength == USB_DT_CONFIG_SIZE
+		&& total >= USB_DT_CONFIG_SIZE
 		&& config->bConfigurationValue != 0
 		&& (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
 		&& (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
@@ -1762,7 +1764,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	}
 	spin_unlock_irq(&dev->lock);
 
-	if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+	if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) ||
+	    (len > PAGE_SIZE * 4))
 		return -EINVAL;
 
 	/* we might need to change message format someday */
@@ -1786,7 +1789,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	/* full or low speed config */
 	dev->config = (void *) kbuf;
 	total = le16_to_cpu(dev->config->wTotalLength);
-	if (!is_valid_config (dev->config) || total >= length)
+	if (!is_valid_config(dev->config, total) ||
+			total > length - USB_DT_DEVICE_SIZE)
 		goto fail;
 	kbuf += total;
 	length -= total;
@@ -1795,10 +1799,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	if (kbuf [1] == USB_DT_CONFIG) {
 		dev->hs_config = (void *) kbuf;
 		total = le16_to_cpu(dev->hs_config->wTotalLength);
-		if (!is_valid_config (dev->hs_config) || total >= length)
+		if (!is_valid_config(dev->hs_config, total) ||
+				total > length - USB_DT_DEVICE_SIZE)
 			goto fail;
 		kbuf += total;
 		length -= total;
+	} else {
+		dev->hs_config = NULL;
 	}
 
 	/* could support multiple configs, using another encoding! */
@@ -1811,7 +1818,6 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 			|| dev->dev->bDescriptorType != USB_DT_DEVICE
 			|| dev->dev->bNumConfigurations != 1)
 		goto fail;
-	dev->dev->bNumConfigurations = 1;
 	dev->dev->bcdUSB = cpu_to_le16 (0x0200);
 
 	/* triggers gadgetfs_bind(); then we can enumerate. */
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 9483489080f6..0402177f93cd 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1317,7 +1317,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 			if (!ret)
 				break;
 		}
-		if (!ret && !udc->driver)
+		if (ret)
+			ret = -ENODEV;
+		else if (udc->driver)
+			ret = -EBUSY;
+		else
 			goto found;
 	} else {
 		list_for_each_entry(udc, &udc_list, list) {
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 02b14e91ae6c..c60abe3a68f9 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep)
 /* caller must hold lock */
 static void stop_activity(struct dummy *dum)
 {
-	struct dummy_ep	*ep;
+	int i;
 
 	/* prevent any more requests */
 	dum->address = 0;
@@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum)
 	/* The timer is left running so that outstanding URBs can fail */
 
 	/* nuke any pending requests first, so driver i/o is quiesced */
-	list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
-		nuke(dum, ep);
+	for (i = 0; i < DUMMY_ENDPOINTS; ++i)
+		nuke(dum, &dum->ep[i]);
 
 	/* driver now does any non-usb quiescing necessary */
 }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index be9e63836881..414e3c376dbb 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -43,7 +43,6 @@ struct at91_usbh_data {
 	struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
 	u8 ports;				/* number of ports on root hub */
 	u8 overcurrent_supported;
-	u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
 	u8 overcurrent_status[AT91_MAX_USBH_PORTS];
 	u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
@@ -266,8 +265,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
 	if (!valid_port(port))
 		return;
 
-	gpiod_set_value(pdata->vbus_pin[port],
-			pdata->vbus_pin_active_low[port] ^ enable);
+	gpiod_set_value(pdata->vbus_pin[port], enable);
 }
 
 static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -275,8 +273,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
 	if (!valid_port(port))
 		return -EINVAL;
 
-	return gpiod_get_value(pdata->vbus_pin[port]) ^
-	       pdata->vbus_pin_active_low[port];
+	return gpiod_get_value(pdata->vbus_pin[port]);
 }
 
 /*
@@ -533,18 +530,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 		pdata->ports = ports;
 
 	at91_for_each_port(i) {
-		pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
-							     "atmel,vbus-gpio",
-							     GPIOD_IN);
+		if (i >= pdata->ports)
+			break;
+
+		pdata->vbus_pin[i] =
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+						      i, GPIOD_OUT_HIGH);
 		if (IS_ERR(pdata->vbus_pin[i])) {
 			err = PTR_ERR(pdata->vbus_pin[i]);
 			dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
 			continue;
 		}
-
-		pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
-		ohci_at91_usb_set_power(pdata, i, 1);
 	}
 
 	at91_for_each_port(i) {
@@ -552,8 +548,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 			break;
 
 		pdata->overcurrent_pin[i] =
-			devm_gpiod_get_optional(&pdev->dev,
-						"atmel,oc-gpio", GPIOD_IN);
+			devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+						      i, GPIOD_IN);
 		if (IS_ERR(pdata->overcurrent_pin[i])) {
 			err = PTR_ERR(pdata->overcurrent_pin[i]);
 			dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 321de2e0161b..8414ed2a02de 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -979,6 +979,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 	xhci->devs[slot_id] = NULL;
 }
 
+/*
+ * Free a virt_device structure.
+ * If the virt_device added a tt_info (a hub) and has children pointing to
+ * that tt_info, then free the child first. Recursive.
+ * We can't rely on udev at this point to find child-parent relationships.
+ */
+void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_virt_device *vdev;
+	struct list_head *tt_list_head;
+	struct xhci_tt_bw_info *tt_info, *next;
+	int i;
+
+	vdev = xhci->devs[slot_id];
+	if (!vdev)
+		return;
+
+	tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* is this a hub device that added a tt_info to the tts list */
+		if (tt_info->slot_id == slot_id) {
+			/* are any devices using this tt_info? */
+			for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
+				vdev = xhci->devs[i];
+				if (vdev && (vdev->tt_info == tt_info))
+					xhci_free_virt_devices_depth_first(
+						xhci, i);
+			}
+		}
+	}
+	/* we are now at a leaf device */
+	xhci_free_virt_device(xhci, slot_id);
+}
+
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		struct usb_device *udev, gfp_t flags)
 {
@@ -1795,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	del_timer_sync(&xhci->cmd_timer);
+	cancel_delayed_work_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1828,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
-	for (i = 1; i < MAX_HC_SLOTS; ++i)
-		xhci_free_virt_device(xhci, i);
+	for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
+		xhci_free_virt_devices_depth_first(xhci, i);
 
 	dma_pool_destroy(xhci->segment_pool);
 	xhci->segment_pool = NULL;
@@ -2342,9 +2376,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->cmd_list);
 
-	/* init command timeout timer */
-	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
-		    (unsigned long)xhci);
+	/* init command timeout work */
+	INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+	init_completion(&xhci->cmd_ring_stop_completion);
 
 	page_size = readl(&xhci->op_regs->page_size);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 1094ebd2838f..bac961cd24ad 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -579,8 +579,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		goto disable_ldos;
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0) {
+		ret = irq;
 		goto disable_clk;
+	}
 
 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
 	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index e96ae80d107e..954abfd5014d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -165,7 +165,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
-		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
 		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bdf6b13d9b67..25f522b09dd9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -279,23 +279,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 	readl(&xhci->dba->doorbell[0]);
 }
 
-static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+{
+	return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+}
+
+static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
+{
+	return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
+					cmd_list);
+}
+
+/*
+ * Turn all commands on command ring with status set to "aborted" to no-op trbs.
+ * If there are other commands waiting then restart the ring and kick the timer.
+ * This must be called with command ring stopped and xhci->lock held.
+ */
+static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+					 struct xhci_command *cur_cmd)
+{
+	struct xhci_command *i_cmd;
+	u32 cycle_state;
+
+	/* Turn all aborted commands in list to no-ops, then restart */
+	list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
+
+		if (i_cmd->status != COMP_CMD_ABORT)
+			continue;
+
+		i_cmd->status = COMP_CMD_STOP;
+
+		xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
+			 i_cmd->command_trb);
+		/* get cycle state from the original cmd trb */
+		cycle_state = le32_to_cpu(
+			i_cmd->command_trb->generic.field[3]) &	TRB_CYCLE;
+		/* modify the command trb to no-op command */
+		i_cmd->command_trb->generic.field[0] = 0;
+		i_cmd->command_trb->generic.field[1] = 0;
+		i_cmd->command_trb->generic.field[2] = 0;
+		i_cmd->command_trb->generic.field[3] = cpu_to_le32(
+			TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+
+		/*
+		 * caller waiting for completion is called when command
+		 *  completion event is received for these no-op commands
+		 */
+	}
+
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+	/* ring command ring doorbell to restart the command ring */
+	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
+	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
+		xhci->current_cmd = cur_cmd;
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_ring_cmd_db(xhci);
+	}
+}
+
+/* Must be called with xhci->lock held, releases and aquires lock back */
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
 	u64 temp_64;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
 
-	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-	xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+	reinit_completion(&xhci->cmd_ring_stop_completion);
 
-	/*
-	 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
-	 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
-	 * but the completion event in never sent. Use the cmd timeout timer to
-	 * handle those cases. Use twice the time to cover the bit polling retry
-	 */
-	mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT));
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
 			&xhci->op_regs->cmd_ring);
 
@@ -315,17 +368,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
 		udelay(1000);
 		ret = xhci_handshake(&xhci->op_regs->cmd_ring,
 				     CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
-		if (ret == 0)
-			return 0;
-
-		xhci_err(xhci, "Stopped the command ring failed, "
-				"maybe the host is dead\n");
-		del_timer(&xhci->cmd_timer);
-		xhci->xhc_state |= XHCI_STATE_DYING;
-		xhci_halt(xhci);
-		return -ESHUTDOWN;
+		if (ret < 0) {
+			xhci_err(xhci, "Stopped the command ring failed, "
+				 "maybe the host is dead\n");
+			xhci->xhc_state |= XHCI_STATE_DYING;
+			xhci_halt(xhci);
+			return -ESHUTDOWN;
+		}
+	}
+	/*
+	 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
+	 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
+	 * but the completion event in never sent. Wait 2 secs (arbitrary
+	 * number) to handle those cases after negation of CMD_RING_RUNNING.
+	 */
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
+					  msecs_to_jiffies(2000));
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!ret) {
+		xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
+		xhci_cleanup_command_queue(xhci);
+	} else {
+		xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
 	}
-
 	return 0;
 }
 
@@ -1207,101 +1273,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
 		xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT);
 }
 
-/*
- * Turn all commands on command ring with status set to "aborted" to no-op trbs.
- * If there are other commands waiting then restart the ring and kick the timer.
- * This must be called with command ring stopped and xhci->lock held.
- */
-static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
-					 struct xhci_command *cur_cmd)
-{
-	struct xhci_command *i_cmd, *tmp_cmd;
-	u32 cycle_state;
-
-	/* Turn all aborted commands in list to no-ops, then restart */
-	list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list,
-				 cmd_list) {
-
-		if (i_cmd->status != COMP_CMD_ABORT)
-			continue;
-
-		i_cmd->status = COMP_CMD_STOP;
-
-		xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
-			 i_cmd->command_trb);
-		/* get cycle state from the original cmd trb */
-		cycle_state = le32_to_cpu(
-			i_cmd->command_trb->generic.field[3]) &	TRB_CYCLE;
-		/* modify the command trb to no-op command */
-		i_cmd->command_trb->generic.field[0] = 0;
-		i_cmd->command_trb->generic.field[1] = 0;
-		i_cmd->command_trb->generic.field[2] = 0;
-		i_cmd->command_trb->generic.field[3] = cpu_to_le32(
-			TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
-
-		/*
-		 * caller waiting for completion is called when command
-		 *  completion event is received for these no-op commands
-		 */
-	}
-
-	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
-	/* ring command ring doorbell to restart the command ring */
-	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
-	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
-		xhci->current_cmd = cur_cmd;
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
-		xhci_ring_cmd_db(xhci);
-	}
-	return;
-}
-
-
-void xhci_handle_command_timeout(unsigned long data)
+void xhci_handle_command_timeout(struct work_struct *work)
 {
 	struct xhci_hcd *xhci;
 	int ret;
 	unsigned long flags;
 	u64 hw_ring_state;
-	bool second_timeout = false;
-	xhci = (struct xhci_hcd *) data;
 
-	/* mark this command to be cancelled */
+	xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
+
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (xhci->current_cmd) {
-		if (xhci->current_cmd->status == COMP_CMD_ABORT)
-			second_timeout = true;
-		xhci->current_cmd->status = COMP_CMD_ABORT;
+
+	/*
+	 * If timeout work is pending, or current_cmd is NULL, it means we
+	 * raced with command completion. Command is handled so just return.
+	 */
+	if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
 	}
+	/* mark this command to be cancelled */
+	xhci->current_cmd->status = COMP_CMD_ABORT;
 
 	/* Make sure command ring is running before aborting it */
 	hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
 	if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
 	    (hw_ring_state & CMD_RING_RUNNING))  {
-		spin_unlock_irqrestore(&xhci->lock, flags);
+		/* Prevent new doorbell, and start command abort */
+		xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
 		xhci_dbg(xhci, "Command timeout\n");
-		ret = xhci_abort_cmd_ring(xhci);
+		ret = xhci_abort_cmd_ring(xhci, flags);
 		if (unlikely(ret == -ESHUTDOWN)) {
 			xhci_err(xhci, "Abort command ring failed\n");
 			xhci_cleanup_command_queue(xhci);
+			spin_unlock_irqrestore(&xhci->lock, flags);
 			usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 			xhci_dbg(xhci, "xHCI host controller is dead.\n");
+
+			return;
 		}
-		return;
+
+		goto time_out_completed;
 	}
 
-	/* command ring failed to restart, or host removed. Bail out */
-	if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) {
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		xhci_dbg(xhci, "command timed out twice, ring start fail?\n");
+	/* host removed. Bail out */
+	if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+		xhci_dbg(xhci, "host removed, ring start fail?\n");
 		xhci_cleanup_command_queue(xhci);
-		return;
+
+		goto time_out_completed;
 	}
 
 	/* command timeout on stopped ring, ring can't be aborted */
 	xhci_dbg(xhci, "Command timeout on stopped ring\n");
 	xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
+
+time_out_completed:
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return;
 }
@@ -1333,7 +1360,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 
 	cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list);
 
-	del_timer(&xhci->cmd_timer);
+	cancel_delayed_work(&xhci->cmd_timer);
 
 	trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event);
 
@@ -1341,7 +1368,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 
 	/* If CMD ring stopped we own the trbs between enqueue and dequeue */
 	if (cmd_comp_code == COMP_CMD_STOP) {
-		xhci_handle_stopped_cmd_ring(xhci, cmd);
+		complete_all(&xhci->cmd_ring_stop_completion);
 		return;
 	}
 
@@ -1359,8 +1386,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	 */
 	if (cmd_comp_code == COMP_CMD_ABORT) {
 		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
-		if (cmd->status == COMP_CMD_ABORT)
+		if (cmd->status == COMP_CMD_ABORT) {
+			if (xhci->current_cmd == cmd)
+				xhci->current_cmd = NULL;
 			goto event_handled;
+		}
 	}
 
 	cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
@@ -1421,7 +1451,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	if (cmd->cmd_list.next != &xhci->cmd_list) {
 		xhci->current_cmd = list_entry(cmd->cmd_list.next,
 					       struct xhci_command, cmd_list);
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+	} else if (xhci->current_cmd == cmd) {
+		xhci->current_cmd = NULL;
 	}
 
 event_handled:
@@ -1939,8 +1971,9 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct xhci_ep_ctx *ep_ctx;
 	u32 trb_comp_code;
 	u32 remaining, requested;
-	bool on_data_stage;
+	u32 trb_type;
 
+	trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
 	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
 	xdev = xhci->devs[slot_id];
 	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
@@ -1950,14 +1983,11 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	requested = td->urb->transfer_buffer_length;
 	remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
 
-	/* not setup (dequeue), or status stage means we are at data stage */
-	on_data_stage = (ep_trb != ep_ring->dequeue && ep_trb != td->last_trb);
-
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
-		if (ep_trb != td->last_trb) {
+		if (trb_type != TRB_STATUS) {
 			xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
-				  on_data_stage ? "data" : "setup");
+				  (trb_type == TRB_DATA) ? "data" : "setup");
 			*status = -ESHUTDOWN;
 			break;
 		}
@@ -1967,15 +1997,25 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		*status = 0;
 		break;
 	case COMP_STOP_SHORT:
-		if (on_data_stage)
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
 			td->urb->actual_length = remaining;
 		else
 			xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
 		goto finish_td;
 	case COMP_STOP:
-		if (on_data_stage)
+		switch (trb_type) {
+		case TRB_SETUP:
+			td->urb->actual_length = 0;
+			goto finish_td;
+		case TRB_DATA:
+		case TRB_NORMAL:
 			td->urb->actual_length = requested - remaining;
-		goto finish_td;
+			goto finish_td;
+		default:
+			xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
+				  trb_type);
+			goto finish_td;
+		}
 	case COMP_STOP_INVAL:
 		goto finish_td;
 	default:
@@ -1987,7 +2027,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		/* else fall through */
 	case COMP_STALL:
 		/* Did we transfer part of the data (middle) phase? */
-		if (on_data_stage)
+		if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
 			td->urb->actual_length = requested - remaining;
 		else if (!td->urb_length_set)
 			td->urb->actual_length = 0;
@@ -1995,14 +2035,15 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	}
 
 	/* stopped at setup stage, no data transferred */
-	if (ep_trb == ep_ring->dequeue)
+	if (trb_type == TRB_SETUP)
 		goto finish_td;
 
 	/*
 	 * if on data stage then update the actual_length of the URB and flag it
 	 * as set, so it won't be overwritten in the event for the last TRB.
 	 */
-	if (on_data_stage) {
+	if (trb_type == TRB_DATA ||
+		trb_type == TRB_NORMAL) {
 		td->urb_length_set = true;
 		td->urb->actual_length = requested - remaining;
 		xhci_dbg(xhci, "Waiting for status stage event\n");
@@ -3790,9 +3831,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 
 	/* if there are no other commands queued we start the timeout timer */
 	if (xhci->cmd_list.next == &cmd->cmd_list &&
-	    !timer_pending(&xhci->cmd_timer)) {
+	    !delayed_work_pending(&xhci->cmd_timer)) {
 		xhci->current_cmd = cmd;
-		mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+		xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
 	}
 
 	queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1cd56417cbec..0c8deb9ed42d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3787,8 +3787,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
-	if (xhci->xhc_state)	/* dying, removing or halted */
+	if (xhci->xhc_state) {	/* dying, removing or halted */
+		ret = -ESHUTDOWN;
 		goto out;
+	}
 
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8ccc11a974b8..2d7b6374b58d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1568,7 +1568,8 @@ struct xhci_hcd {
 #define CMD_RING_STATE_STOPPED         (1 << 2)
 	struct list_head        cmd_list;
 	unsigned int		cmd_ring_reserved_trbs;
-	struct timer_list	cmd_timer;
+	struct delayed_work	cmd_timer;
+	struct completion	cmd_ring_stop_completion;
 	struct xhci_command	*current_cmd;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
@@ -1934,7 +1935,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_dequeue_state *deq_state);
 void xhci_stop_endpoint_command_watchdog(unsigned long arg);
-void xhci_handle_command_timeout(unsigned long data);
+void xhci_handle_command_timeout(struct work_struct *work);
 
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 310238c6b5cd..896798071817 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = {
 	.init		= bfin_musb_init,
 	.exit		= bfin_musb_exit,
 
+	.fifo_offset	= bfin_fifo_offset,
 	.readb		= bfin_readb,
 	.writeb		= bfin_writeb,
 	.readw		= bfin_readw,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9e226468a13e..fca288bbc800 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2050,6 +2050,7 @@ struct musb_pending_work {
 	struct list_head node;
 };
 
+#ifdef CONFIG_PM
 /*
  * Called from musb_runtime_resume(), musb_resume(), and
  * musb_queue_resume_work(). Callers must take musb->lock.
@@ -2077,6 +2078,7 @@ static int musb_run_resume_work(struct musb *musb)
 
 	return error;
 }
+#endif
 
 /*
  * Called to run work if device is active or else queue the work to happen
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index a611e2f67bdc..ade902ea1221 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -216,6 +216,7 @@ struct musb_platform_ops {
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
 	int	(*phy_callback)(enum musb_vbus_id_status status);
+	void	(*clear_ep_rxintr)(struct musb *musb, int epnum);
 };
 
 /*
@@ -626,6 +627,12 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
 		musb->ops->post_root_reset_end(musb);
 }
 
+static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	if (musb->ops->clear_ep_rxintr)
+		musb->ops->clear_ep_rxintr(musb, epnum);
+}
+
 /*
  * gets the "dr_mode" property from DT and converts it into musb_mode
  * if the property is not found or not recognized returns MUSB_OTG
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index feae1561b9ab..9f125e179acd 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -267,6 +267,17 @@ static void otg_timer(unsigned long _musb)
 	pm_runtime_put_autosuspend(dev);
 }
 
+void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	u32 epintr;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+	/* musb->lock might already been held */
+	epintr = (1 << epnum) << wrp->rxep_shift;
+	musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
 static irqreturn_t dsps_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
@@ -622,6 +633,7 @@ static struct musb_platform_ops dsps_ops = {
 
 	.set_mode	= dsps_musb_set_mode,
 	.recover	= dsps_musb_recover,
+	.clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index f6cdbad00dac..ac3a4952abb4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2374,12 +2374,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 	int			is_in = usb_pipein(urb->pipe);
 	int			status = 0;
 	u16			csr;
+	struct dma_channel	*dma = NULL;
 
 	musb_ep_select(regs, hw_end);
 
 	if (is_dma_capable()) {
-		struct dma_channel	*dma;
-
 		dma = is_in ? ep->rx_channel : ep->tx_channel;
 		if (dma) {
 			status = ep->musb->dma_controller->channel_abort(dma);
@@ -2395,10 +2394,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
 		/* giveback saves bulk toggle */
 		csr = musb_h_flush_rxfifo(ep, 0);
 
-		/* REVISIT we still get an irq; should likely clear the
-		 * endpoint's irq status here to avoid bogus irqs.
-		 * clearing that status is platform-specific...
-		 */
+		/* clear the endpoint's irq status here to avoid bogus irqs */
+		if (is_dma_capable() && dma)
+			musb_platform_clear_ep_rxintr(musb, ep->epnum);
 	} else if (ep->epnum) {
 		musb_h_tx_flush_fifo(ep);
 		csr = musb_readw(epio, MUSB_TXCSR);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f7b13fd25257..a3dcbd55e436 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -157,5 +157,5 @@ struct musb_dma_controller {
 	void __iomem			*base;
 	u8				channel_count;
 	u8				used_channels;
-	u8				irq;
+	int				irq;
 };
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 5f17a3b9916d..80260b08398b 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
 static int cyberjack_port_probe(struct usb_serial_port *port);
 static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		cyberjack_attach,
 	.port_probe =		cyberjack_port_probe,
 	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
+static int cyberjack_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 8282a6a18fee..22f23a429a95 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -1237,6 +1237,7 @@ static int f81534_attach(struct usb_serial *serial)
 static int f81534_port_probe(struct usb_serial_port *port)
 {
 	struct f81534_port_private *port_priv;
+	int ret;
 
 	port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
 	if (!port_priv)
@@ -1246,10 +1247,11 @@ static int f81534_port_probe(struct usb_serial_port *port)
 	mutex_init(&port_priv->mcr_mutex);
 
 	/* Assign logic-to-phy mapping */
-	port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
-	if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
-		return -ENODEV;
+	ret = f81534_logic_to_phy_port(port->serial, port);
+	if (ret < 0)
+		return ret;
 
+	port_priv->phy_num = ret;
 	usb_set_serial_port_data(port, port_priv);
 	dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
 			port->port_number, port_priv->phy_num);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 97cabf803c2f..b2f2e87aed94 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1043,6 +1043,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		kfree(buffer);
 	}
 
 	/* we are done with this urb, so let the host driver
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dcc0c58aaad5..d50e5773483f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2751,6 +2751,11 @@ static int edge_startup(struct usb_serial *serial)
 					EDGE_COMPATIBILITY_MASK1,
 					EDGE_COMPATIBILITY_MASK2 };
 
+	if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	dev = serial->dev;
 
 	/* create our private serial structure */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c339163698eb..9a0db2965fbb 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
 
 		dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
 
-		/* return an error on purpose */
-		return -ENODEV;
+		return 1;
 	}
 
 stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
 	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
 	serial->product_info.TiMode = TI_MODE_BOOT;
 
-	return 0;
+	return 1;
 }
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2546,6 +2545,13 @@ static int edge_startup(struct usb_serial *serial)
 	int status;
 	u16 product_id;
 
+	/* Make sure we have the required endpoints when in download mode. */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+		if (serial->num_bulk_in < serial->num_ports ||
+				serial->num_bulk_out < serial->num_ports)
+			return -ENODEV;
+	}
+
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
 	if (!edge_serial)
@@ -2553,14 +2559,18 @@ static int edge_startup(struct usb_serial *serial)
 
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	usb_set_serial_data(serial, edge_serial);
 
 	status = download_fw(edge_serial);
-	if (status) {
+	if (status < 0) {
 		kfree(edge_serial);
 		return status;
 	}
 
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
 	product_id = le16_to_cpu(
 			edge_serial->serial->dev->descriptor.idProduct);
 
@@ -2572,7 +2582,6 @@ static int edge_startup(struct usb_serial *serial)
 		}
 	}
 
-	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	edge_heartbeat_schedule(edge_serial);
 
 	return 0;
@@ -2580,6 +2589,9 @@ static int edge_startup(struct usb_serial *serial)
 
 static void edge_disconnect(struct usb_serial *serial)
 {
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
 }
 
 static void edge_release(struct usb_serial *serial)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 344b4eea4bd5..d57fb5199218 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
 	u32 clk;
 };
 
+static int iuu_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
+	.attach = iuu_attach,
 	.port_probe = iuu_port_probe,
 	.port_remove = iuu_port_remove,
 };
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e49ad0c63ad8..83523fcf6fb9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
+	.attach =		keyspan_pda_attach,
 	.port_probe =		keyspan_pda_port_probe,
 	.port_remove =		keyspan_pda_port_remove,
 };
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 2363654cafc9..813035f51fe7 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
 
 
 /* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
 static int kobil_port_probe(struct usb_serial_port *probe);
 static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		kobil_attach,
 	.port_probe =		kobil_port_probe,
 	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
 };
 
 
+static int kobil_attach(struct usb_serial *serial)
+{
+	if (serial->num_interrupt_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int kobil_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index d52caa03679c..91bc170b408a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-static struct usb_serial_driver moschip7720_2port_driver;
-
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		tty_port_tty_wakeup(&mos7720_port->port->port);
 }
 
-/*
- * mos77xx_probe
- *	this function installs the appropriate read interrupt endpoint callback
- *	depending on whether the device is a 7720 or 7715, thus avoiding costly
- *	run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
-			 const struct usb_device_id *id)
-{
-	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
-		moschip7720_2port_driver.read_int_callback =
-			mos7715_interrupt_callback;
-	else
-		moschip7720_2port_driver.read_int_callback =
-			mos7720_interrupt_callback;
-
-	return 0;
-}
-
 static int mos77xx_calc_num_ports(struct usb_serial *serial)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1917,6 +1896,11 @@ static int mos7720_startup(struct usb_serial *serial)
 	u16 product;
 	int ret_val;
 
+	if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+		return -ENODEV;
+	}
+
 	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
@@ -1941,19 +1925,18 @@ static int mos7720_startup(struct usb_serial *serial)
 			tmp->interrupt_in_endpointAddress;
 		serial->port[1]->interrupt_in_urb = NULL;
 		serial->port[1]->interrupt_in_buffer = NULL;
+
+		if (serial->port[0]->interrupt_in_urb) {
+			struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+			urb->complete = mos7715_interrupt_callback;
+		}
 	}
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
-	/* start the interrupt urb */
-	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
-	if (ret_val)
-		dev_err(&dev->dev,
-			"%s - Error %d submitting control urb\n",
-			__func__, ret_val);
-
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	if (product == MOSCHIP_DEVICE_ID_7715) {
 		ret_val = mos7715_parport_init(serial);
@@ -1961,6 +1944,13 @@ static int mos7720_startup(struct usb_serial *serial)
 			return ret_val;
 	}
 #endif
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val) {
+		dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+			ret_val);
+	}
+
 	/* LSR For Port 1 */
 	read_mos_reg(serial, 0, MOS7720_LSR, &data);
 	dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1970,6 +1960,8 @@ static int mos7720_startup(struct usb_serial *serial)
 
 static void mos7720_release(struct usb_serial *serial)
 {
+	usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	/* close the parallel port */
 
@@ -2019,11 +2011,6 @@ static int mos7720_port_probe(struct usb_serial_port *port)
 	if (!mos7720_port)
 		return -ENOMEM;
 
-	/* Initialize all port interrupt end point to port 0 int endpoint.
-	 * Our device has only one interrupt endpoint common to all ports.
-	 */
-	port->interrupt_in_endpointAddress =
-		port->serial->port[0]->interrupt_in_endpointAddress;
 	mos7720_port->port = port;
 
 	usb_set_serial_port_data(port, mos7720_port);
@@ -2053,7 +2040,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
-	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.port_probe		= mos7720_port_probe,
@@ -2067,7 +2053,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= NULL  /* dynamically assigned in probe() */
+	.read_int_callback	= mos7720_interrupt_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 9a220b8e810f..ea27fb23967a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct moschip_port {
 	int port_num;		/*Actual port number in the device(1,2,etc) */
-	struct urb *write_urb;	/* write URB for this port */
 	struct urb *read_urb;	/* read URB for this port */
 	__u8 shadowLCR;		/* last LCR value received */
 	__u8 shadowMCR;		/* last MCR value received */
@@ -1037,9 +1036,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				serial,
 				serial->port[0]->interrupt_in_urb->interval);
 
-			/* start interrupt read for mos7840               *
-			 * will continue as long as mos7840 is connected  */
-
+			/* start interrupt read for mos7840 */
 			response =
 			    usb_submit_urb(serial->port[0]->interrupt_in_urb,
 					   GFP_KERNEL);
@@ -1186,7 +1183,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	usb_kill_urb(mos7840_port->write_urb);
 	usb_kill_urb(mos7840_port->read_urb);
 	mos7840_port->read_urb_busy = false;
 
@@ -1199,12 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	if (mos7840_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(mos7840_port->write_urb->transfer_buffer);
-		usb_free_urb(mos7840_port->write_urb);
-	}
-
 	Data = 0x0;
 	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
 
@@ -2113,6 +2103,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 	return mos7840_num_ports;
 }
 
+static int mos7840_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2388,6 +2389,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmset = mos7840_tiocmset,
 	.tiocmiwait = usb_serial_generic_tiocmiwait,
 	.get_icount = usb_serial_generic_get_icount,
+	.attach = mos7840_attach,
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index f6c6900bccf0..a180b17d2432 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
 static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
 static int omninet_port_probe(struct usb_serial_port *port);
 static int omninet_port_remove(struct usb_serial_port *port);
 
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		omninet_attach,
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
 	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
+static int omninet_attach(struct usb_serial *serial)
+{
+	/* The second bulk-out endpoint is used for writing. */
+	if (serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a4b88bc038b6..b8bf52bf7a94 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
 static int oti6858_port_probe(struct usb_serial_port *port);
 static int oti6858_port_remove(struct usb_serial_port *port);
 
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
+	.attach =		oti6858_attach,
 	.port_probe =		oti6858_port_probe,
 	.port_remove =		oti6858_port_remove,
 };
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
+static int oti6858_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int oti6858_port_probe(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae682e4eeaef..46fca6b75846 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial,
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
+	unsigned char num_ports = serial->num_ports;
 	enum pl2303_type type = TYPE_01;
 	unsigned char *buf;
 
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 659cb8606bd9..5709cc93b083 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct qt2_port_private *port_priv;
-	unsigned long flags;
 	int i;
 
 	serial = port->serial;
 	port_priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave(&port_priv->urb_lock, flags);
 	usb_kill_urb(port_priv->write_urb);
-	port_priv->urb_in_use = false;
-	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ef0dbf0703c5..475e6c31b266 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
+	.attach			= spcp8x5_attach,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8db9d071d940..64b85b8dedf3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -579,6 +579,13 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
 	return 0;
 
 free_tdev:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index af3c7eecff91..16cc18369111 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2109,6 +2109,13 @@ UNUSUAL_DEV(  0x152d, 0x2566, 0x0114, 0x0114,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA ),
 
+/* Reported-by George Cherian <george.cherian@cavium.com> */
+UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999,
+		"JMicron",
+		"JMS56x",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
 /*
  * Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
  * and Mac USB Dock USB-SCSI */