xhci: add port and bus number to port dynamic debugging

Improve port related dynamic debugging by printing out the bus number,
port number and port status register content each time there is a port
related debug messages.

Use the same port numbering method as usbcore to simplify debugging.
i.e. starting with port number 1.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 27 insertions, 17 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 96a740543183..3abe70ff1b1e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -487,8 +487,8 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 	/* Write 1 to disable the port */
 	writel(port_status | PORT_PE, addr);
 	port_status = readl(addr);
-	xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
-			wIndex, port_status);
+	xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
+		 hcd->self.busnum, wIndex + 1, port_status);
 }
 
 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
@@ -537,8 +537,9 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 	/* Change bits are all write 1 to clear */
 	writel(port_status | status, addr);
 	port_status = readl(addr);
-	xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
-			port_change_bit, wIndex, port_status);
+
+	xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
+		 wIndex + 1, port_change_bit, port_status);
 }
 
 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
@@ -565,13 +566,16 @@ static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
 	rhub = xhci_get_rhub(hcd);
 	port = rhub->ports[index];
 	temp = readl(port->addr);
+
+	xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
+		 hcd->self.busnum, index + 1, on ? "ON" : "OFF", temp);
+
 	temp = xhci_port_state_to_neutral(temp);
+
 	if (on) {
 		/* Power on */
 		writel(temp | PORT_POWER, port->addr);
-		temp = readl(port->addr);
-		xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n",
-						index, temp);
+		readl(port->addr);
 	} else {
 		/* Power off */
 		writel(temp & ~PORT_POWER, port->addr);
@@ -666,12 +670,17 @@ void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
 			 u32 link_state)
 {
 	u32 temp;
+	u32 portsc;
 
-	temp = readl(port->addr);
-	temp = xhci_port_state_to_neutral(temp);
+	portsc = readl(port->addr);
+	temp = xhci_port_state_to_neutral(portsc);
 	temp &= ~PORT_PLS_MASK;
 	temp |= PORT_LINK_STROBE | link_state;
 	writel(temp, port->addr);
+
+	xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",
+		 port->rhub->hcd->self.busnum, port->hcd_portnum + 1,
+		 portsc, temp);
 }
 
 static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
@@ -840,7 +849,9 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 	} else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) {
 		int time_left;
 
-		xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1);
+		xhci_dbg(xhci, "resume USB2 port %d-%d\n",
+			 hcd->self.busnum, wIndex + 1);
+
 		bus_state->resume_done[wIndex] = 0;
 		clear_bit(wIndex, &bus_state->resuming_ports);
 
@@ -867,9 +878,8 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
 		} else {
 			int port_status = readl(port->addr);
 
-			xhci_warn(xhci, "Port resume %i msec timed out, portsc = 0x%x\n",
-				  XHCI_MAX_REXIT_TIMEOUT_MS,
-				  port_status);
+			xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
+				  hcd->self.busnum, wIndex + 1, port_status);
 			*status |= USB_PORT_STAT_SUSPEND;
 			clear_bit(wIndex, &bus_state->rexit_ports);
 		}
@@ -1124,9 +1134,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		if (status == 0xffffffff)
 			goto error;
 
-		xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n",
-				wIndex, temp);
-		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
+		xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
+			 hcd->self.busnum, wIndex + 1, temp, status);
 
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		/* if USB 3.1 extended port status return additional 4 bytes */
@@ -1182,7 +1191,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = readl(ports[wIndex]->addr);
 			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
-				xhci_warn(xhci, "USB core suspending device not in U0/U1/U2.\n");
+				xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
+					  hcd->self.busnum, wIndex + 1);
 				goto error;
 			}