Merge branch 'master' of /home/trondmy/kernel/linux-2.6/ into merge_linus

Conflicts:

	include/linux/sunrpc/xprt.h
	net/sunrpc/xprtsock.c
Fix up conflicts with the workqueue changes.

3 files changed, 91 insertions, 6 deletions

diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index aee1b31f1a1c..3db206d29b33 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -60,7 +60,8 @@ struct timer_list mcfrs_timer_struct;
 #if defined(CONFIG_HW_FEITH)
 #define	CONSOLE_BAUD_RATE	38400
 #define	DEFAULT_CBAUD		B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || defined(CONFIG_M5329EVB)
+#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
+      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
 #define CONSOLE_BAUD_RATE 	115200
 #define DEFAULT_CBAUD		B115200
 #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
@@ -109,12 +110,30 @@ static struct mcf_serial mcfrs_table[] = {
 		.irq = IRQBASE,
 		.flags = ASYNC_BOOT_AUTOCONF,
 	},
+#ifdef MCFUART_BASE2
 	{  /* ttyS1 */
 		.magic = 0,
 		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
 		.irq = IRQBASE+1,
 		.flags = ASYNC_BOOT_AUTOCONF,
 	},
+#endif
+#ifdef MCFUART_BASE3
+	{  /* ttyS2 */
+		.magic = 0,
+		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
+		.irq = IRQBASE+2,
+		.flags = ASYNC_BOOT_AUTOCONF,
+	},
+#endif
+#ifdef MCFUART_BASE4
+	{  /* ttyS3 */
+		.magic = 0,
+		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
+		.irq = IRQBASE+3,
+		.flags = ASYNC_BOOT_AUTOCONF,
+	},
+#endif
 };
 
 
@@ -1516,6 +1535,22 @@ static void mcfrs_irqinit(struct mcf_serial *info)
 	imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
 		MCFINTC_IMRL);
 	*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
+#if defined(CONFIG_M527x)
+	{
+		/*
+		 * External Pin Mask Setting & Enable External Pin for Interface
+		 * mrcbis@aliceposta.it
+        	 */
+		unsigned short *serpin_enable_mask;
+		serpin_enable_mask = (MCF_IPSBAR + MCF_GPIO_PAR_UART);
+		if (info->line == 0)
+			*serpin_enable_mask |= UART0_ENABLE_MASK;
+		else if (info->line == 1)
+			*serpin_enable_mask |= UART1_ENABLE_MASK;
+		else if (info->line == 2)
+			*serpin_enable_mask |= UART2_ENABLE_MASK;
+	}
+#endif
 #elif defined(CONFIG_M520x)
 	volatile unsigned char *icrp, *uartp;
 	volatile unsigned long *imrp;
@@ -1713,7 +1748,7 @@ mcfrs_init(void)
 	/* Initialize the tty_driver structure */
 	mcfrs_serial_driver->owner = THIS_MODULE;
 	mcfrs_serial_driver->name = "ttyS";
-	mcfrs_serial_driver->driver_name = "serial";
+	mcfrs_serial_driver->driver_name = "mcfserial";
 	mcfrs_serial_driver->major = TTY_MAJOR;
 	mcfrs_serial_driver->minor_start = 64;
 	mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1797,10 +1832,23 @@ void mcfrs_init_console(void)
 	uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
 	uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
 
+#ifdef	CONFIG_M5272
+{
+	/*
+	 * For the MCF5272, also compute the baudrate fraction.
+	 */
+	int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
+	fraction *= 16;
+	fraction /= (32 * mcfrs_console_baud);
+	uartp[MCFUART_UFPD] = (fraction & 0xf);		/* set fraction */
+	clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
+}
+#else
 	clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
+#endif
+
 	uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8;  /* set msb baud */
 	uartp[MCFUART_UBG2] = (clk & 0xff);  /* set lsb baud */
-
 	uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
 	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
 
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index cfcc3caf49d8..3b5f19ec2126 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -775,7 +775,7 @@ static int sci_notifier(struct notifier_block *self,
 			 *
 			 * Clean this up later..
 			 */
-			clk = clk_get("module_clk");
+			clk = clk_get(NULL, "module_clk");
 			port->uartclk = clk_get_rate(clk) * 16;
 			clk_put(clk);
 		}
@@ -960,7 +960,7 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios,
 		default:
 		{
 #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
-			struct clk *clk = clk_get("module_clk");
+			struct clk *clk = clk_get(NULL, "module_clk");
 			t = SCBRR_VALUE(baud, clk_get_rate(clk));
 			clk_put(clk);
 #else
@@ -1128,7 +1128,7 @@ static void __init sci_init_ports(void)
 		 * XXX: We should use a proper SCI/SCIF clock
 		 */
 		{
-			struct clk *clk = clk_get("module_clk");
+			struct clk *clk = clk_get(NULL, "module_clk");
 			sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
 			clk_put(clk);
 		}
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 7ee992146ae9..e4557cc4f74b 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,6 +133,20 @@
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
+# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
+# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
+# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
+# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
+# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -365,6 +379,7 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
@@ -544,6 +559,28 @@ static inline int sci_rxd_in(struct uart_port *port)
 	if (port->mapbase == 0xffe10000)
 		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfffe8000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe8800)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe9000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xfffe9800)
+		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xf8400000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xf8410000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xf8420000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
 #endif
 
 /*