diff options
| author | Marco Felsch <m.felsch@pengutronix.de> | 2018-07-23 09:47:47 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-07-23 20:09:31 +0100 |
| commit | 9d2fd4f0ddfbc4aa1135000df34caebc02793a26 (patch) | |
| tree | 34ea0b2dec2e4368ae863b1b1afb3be6f949b7d1 /drivers/regulator/pfuze100-regulator.c | |
| parent | 78170811a2048de8e77a27a053be8b3eb3d4e556 (diff) | |
regulator: pfuze100: add support to en-/disable switch regulators
Add enable/disable support for switch regulators on pfuze100.
Based on commit 5fe156f1cab4 ("regulator: pfuze100: add enable/disable for
switch") which is reverted due to boot regressions by commit 464a5686e6c9
("regulator: Revert "regulator: pfuze100: add enable/disable for switch"").
Disabling the switch regulators will only be done if the user specifies
"fsl,pfuze-support-disable-sw" in its device tree to keep backward
compatibility with current dtb's [1].
[1] https://patchwork.kernel.org/patch/10490381/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator/pfuze100-regulator.c')
| -rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index cde6eda1d283..31c3a236120a 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -17,6 +17,8 @@ #include <linux/slab.h> #include <linux/regmap.h> +#define PFUZE_FLAG_DISABLE_SW BIT(1) + #define PFUZE_NUMREGS 128 #define PFUZE100_VOL_OFFSET 0 #define PFUZE100_STANDBY_OFFSET 1 @@ -50,10 +52,12 @@ struct pfuze_regulator { struct regulator_desc desc; unsigned char stby_reg; unsigned char stby_mask; + bool sw_reg; }; struct pfuze_chip { int chip_id; + int flags; struct regmap *regmap; struct device *dev; struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; @@ -170,6 +174,17 @@ static const struct regulator_ops pfuze100_sw_regulator_ops = { .set_ramp_delay = pfuze100_set_ramp_delay, }; +static const struct regulator_ops pfuze100_sw_disable_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pfuze100_set_ramp_delay, +}; + static const struct regulator_ops pfuze100_swb_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -209,9 +224,12 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .uV_step = (step), \ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ .vsel_mask = 0x3f, \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_mask = 0xf, \ }, \ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ .stby_mask = 0x3f, \ + .sw_reg = true, \ } #define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \ @@ -471,6 +489,9 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) if (!np) return -EINVAL; + if (of_property_read_bool(np, "fsl,pfuze-support-disable-sw")) + chip->flags |= PFUZE_FLAG_DISABLE_SW; + parent = of_get_child_by_name(np, "regulators"); if (!parent) { dev_err(dev, "regulators node not found\n"); @@ -703,6 +724,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client, } } + /* + * Allow SW regulators to turn off. Checking it trough a flag is + * a workaround to keep the backward compatibility with existing + * old dtb's which may relay on the fact that we didn't disable + * the switched regulator till yet. + */ + if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) { + if (pfuze_chip->regulator_descs[i].sw_reg) { + desc->ops = &pfuze100_sw_disable_regulator_ops; + desc->enable_val = 0x8; + desc->disable_val = 0x0; + desc->enable_time = 500; + } + } + config.dev = &client->dev; config.init_data = init_data; config.driver_data = pfuze_chip; |