diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-02-08 10:37:06 -0800 |
|---|---|---|
| committer | Liam Girdwood <lrg@slimlogic.co.uk> | 2009-03-31 09:56:25 +0100 |
| commit | fa16a5c13a2fc1433cfff38a083b4f8c5138d022 (patch) | |
| tree | 81f2e5ce5a1c1b7bd4de59e695b5e423126f3ec2 /drivers/regulator/Makefile | |
| parent | 3b2a6061afe6fcc44437cd5ec641b0aeb2825ee3 (diff) | |
regulator: twl4030 regulators
Support most of the LDO regulators in the twl4030 family chips.
In the case of LDOs supporting MMC/SD, the voltage controls are
used; but in most other cases, the regulator framework is only
used to enable/disable a supplies, conserving power when a given
voltage rail is not needed.
The drivers/mfd/twl4030-core.c code already sets up the various
regulators according to board-specific configuration, and knows
that some chips don't provide the full set of voltage rails.
The omitted regulators are intended to be under hardware control,
such as during the hardware-mediated system powerup, powerdown,
and suspend states. Unless/until software hooks are known to
be safe, they won't be exported here.
These regulators implement the new get_status() operation, but
can't realistically implement get_mode(); the status output is
effectively the result of a vote, with the relevant hardware
inputs not exposed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers/regulator/Makefile')
| -rw-r--r-- | drivers/regulator/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 61b30c6ddecc..bac133afc061 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o +obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o |