[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback

Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 14 insertions, 70 deletions

diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 196e827fc846..7e2039f52c49 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4594,14 +4594,12 @@ wavelan_close(struct net_device *	dev)
  * configure the card at this point -- we wait until we receive a
  * card insertion event.
  */
-static dev_link_t *
-wavelan_attach(void)
+static int
+wavelan_attach(struct pcmcia_device *p_dev)
 {
-  client_reg_t	client_reg;	/* Register with cardmgr */
   dev_link_t *	link;		/* Info for cardmgr */
   struct net_device *	dev;		/* Interface generic data */
   net_local *	lp;		/* Interface specific data */
-  int		ret;
 
 #ifdef DEBUG_CALLBACK_TRACE
   printk(KERN_DEBUG "-> wavelan_attach()\n");
@@ -4609,7 +4607,7 @@ wavelan_attach(void)
 
   /* Initialize the dev_link_t structure */
   link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
-  if (!link) return NULL;
+  if (!link) return -ENOMEM;
 
   /* The io structure describes IO port mapping */
   link->io.NumPorts1 = 8;
@@ -4633,7 +4631,7 @@ wavelan_attach(void)
   dev = alloc_etherdev(sizeof(net_local));
   if (!dev) {
       kfree(link);
-      return NULL;
+      return -ENOMEM;
   }
   link->priv = link->irq.Instance = dev;
 
@@ -4678,28 +4676,21 @@ wavelan_attach(void)
   /* Other specific data */
   dev->mtu = WAVELAN_MTU;
 
-  /* Register with Card Services */
-  client_reg.dev_info = &dev_info;
-  client_reg.Version = 0x0210;
-  client_reg.event_callback_args.client_data = link;
-
-#ifdef DEBUG_CONFIG_INFO
-  printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n");
-#endif
+  link->handle = p_dev;
+  p_dev->instance = link;
 
-  ret = pcmcia_register_client(&link->handle, &client_reg);
-  if(ret != 0)
-    {
-      cs_error(link->handle, RegisterClient, ret);
-      wavelan_detach(link->handle);
-      return NULL;
-    }
+  link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+  if(wv_pcmcia_config(link) &&
+     wv_hw_config(dev))
+	  wv_init_info(dev);
+  else
+	  dev->irq = 0;
 
 #ifdef DEBUG_CALLBACK_TRACE
   printk(KERN_DEBUG "<- wavelan_attach()\n");
 #endif
 
-  return link;
+  return 0;
 }
 
 /*------------------------------------------------------------------*/
@@ -4801,52 +4792,6 @@ static int wavelan_resume(struct pcmcia_device *p_dev)
 }
 
 
-/*------------------------------------------------------------------*/
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received. A CARD_REMOVAL event also sets
- * some flags to discourage the net drivers from trying to talk to the
- * card any more.
- */
-static int
-wavelan_event(event_t		event,		/* The event received */
-	      int		priority,
-	      event_callback_args_t *	args)
-{
-  dev_link_t *	link = (dev_link_t *) args->client_data;
-  struct net_device *	dev = (struct net_device *) link->priv;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "->wavelan_event(): %s\n",
-	 ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" :
-	  ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" :
-	   ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" :
-	    ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" :
-	     ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" :
-	      ((event == CS_EVENT_PM_RESUME) ? "pm resume" :
-	       ((event == CS_EVENT_CARD_RESET) ? "card reset" :
-		"unknown"))))))));
-#endif
-
-    switch(event)
-      {
-      case CS_EVENT_CARD_INSERTION:
-	/* Reset and configure the card */
-	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-	if(wv_pcmcia_config(link) &&
-	   wv_hw_config(dev))
-	  wv_init_info(dev);
-	else
-	  dev->irq = 0;
-	break;
-    }
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "<-wavelan_event()\n");
-#endif
-  return 0;
-}
-
 static struct pcmcia_device_id wavelan_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
 	PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
@@ -4861,8 +4806,7 @@ static struct pcmcia_driver wavelan_driver = {
 	.drv		= {
 		.name	= "wavelan_cs",
 	},
-	.attach		= wavelan_attach,
-	.event		= wavelan_event,
+	.probe		= wavelan_attach,
 	.remove		= wavelan_detach,
 	.id_table       = wavelan_ids,
 	.suspend	= wavelan_suspend,