Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

cdc-wdm: s/kill_urbs/poison_urbs/ to fix build

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

6 files changed, 83 insertions, 43 deletions

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 9150038b60cb..3b018fcf4412 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -821,11 +821,9 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
 
 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
-		u32 reg_rgmii_ctrl;
+		u32 reg_rgmii_ctrl = 0;
 		u32 reg, offset;
 
-		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-
 		if (priv->type == BCM4908_DEVICE_ID ||
 		    priv->type == BCM7445_DEVICE_ID)
 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
@@ -836,6 +834,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
 		    interface == PHY_INTERFACE_MODE_MII ||
 		    interface == PHY_INTERFACE_MODE_REVMII) {
+			reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
 			reg = reg_readl(priv, reg_rgmii_ctrl);
 			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
 
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 55e5d479acce..854e25f43fa7 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1530,6 +1530,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = {
 		.num_statics = 16,
 		.cpu_ports = 0x7F,	/* can be configured as cpu port */
 		.port_cnt = 7,		/* total physical port count */
+		.phy_errata_9477 = true,
 	},
 };
 
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index db838343fb05..93136f7e69f5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1273,14 +1273,6 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	/* The real fabric path would be decided on the membership in the
-	 * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS
-	 * means potential VLAN can be consisting of certain subset of all
-	 * ports.
-	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port),
-		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
-
 	/* Trapped into security mode allows packet forwarding through VLAN
 	 * table lookup. CPU port is set to fallback mode to let untagged
 	 * frames pass through.
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 2473bebe48e6..f966a253d1c7 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1227,12 +1227,17 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
 	if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX)
 		return -ERANGE;
 
-	/* Set port num and disable ALWAYS_GUARD_BAND_SCH_Q, which means set
-	 * guard band to be implemented for nonschedule queues to schedule
-	 * queues transition.
+	/* Enable guard band. The switch will schedule frames without taking
+	 * their length into account. Thus we'll always need to enable the
+	 * guard band which reserves the time of a maximum sized frame at the
+	 * end of the time window.
+	 *
+	 * Although the ALWAYS_GUARD_BAND_SCH_Q bit is global for all ports, we
+	 * need to set PORT_NUM, because subsequent writes to PARAM_CFG_REG_n
+	 * operate on the port number.
 	 */
-	ocelot_rmw(ocelot,
-		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port),
+	ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port) |
+		   QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
 		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M |
 		   QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
 		   QSYS_TAS_PARAM_CFG_CTRL);
diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
index b777d3f37573..12cd04b56803 100644
--- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
@@ -167,9 +167,10 @@ enum sja1105_hostcmd {
 	SJA1105_HOSTCMD_INVALIDATE = 4,
 };
 
+/* Command and entry overlap */
 static void
-sja1105_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
-			      enum packing_op op)
+sja1105et_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+				enum packing_op op)
 {
 	const int size = SJA1105_SIZE_DYN_CMD;
 
@@ -179,6 +180,20 @@ sja1105_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
 	sja1105_packing(buf, &cmd->index,    9,  0, size, op);
 }
 
+/* Command and entry are separate */
+static void
+sja1105pqrs_vl_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
+				  enum packing_op op)
+{
+	u8 *p = buf + SJA1105_SIZE_VL_LOOKUP_ENTRY;
+	const int size = SJA1105_SIZE_DYN_CMD;
+
+	sja1105_packing(p, &cmd->valid,   31, 31, size, op);
+	sja1105_packing(p, &cmd->errors,  30, 30, size, op);
+	sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
+	sja1105_packing(p, &cmd->index,    9,  0, size, op);
+}
+
 static size_t sja1105et_vl_lookup_entry_packing(void *buf, void *entry_ptr,
 						enum packing_op op)
 {
@@ -641,7 +656,7 @@ static size_t sja1105pqrs_cbs_entry_packing(void *buf, void *entry_ptr,
 const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_VL_LOOKUP] = {
 		.entry_packing = sja1105et_vl_lookup_entry_packing,
-		.cmd_packing = sja1105_vl_lookup_cmd_packing,
+		.cmd_packing = sja1105et_vl_lookup_cmd_packing,
 		.access = OP_WRITE,
 		.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
 		.packed_size = SJA1105ET_SIZE_VL_LOOKUP_DYN_CMD,
@@ -725,7 +740,7 @@ const struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
 const struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
 	[BLK_IDX_VL_LOOKUP] = {
 		.entry_packing = sja1105_vl_lookup_entry_packing,
-		.cmd_packing = sja1105_vl_lookup_cmd_packing,
+		.cmd_packing = sja1105pqrs_vl_lookup_cmd_packing,
 		.access = (OP_READ | OP_WRITE),
 		.max_entry_count = SJA1105_MAX_VL_LOOKUP_COUNT,
 		.packed_size = SJA1105PQRS_SIZE_VL_LOOKUP_DYN_CMD,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index a105e174b3af..2080f36ff25b 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -26,6 +26,7 @@
 #include "sja1105_tas.h"
 
 #define SJA1105_UNKNOWN_MULTICAST	0x010000000000ull
+#define SJA1105_DEFAULT_VLAN		(VLAN_N_VID - 1)
 
 static const struct dsa_switch_ops sja1105_switch_ops;
 
@@ -209,6 +210,7 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv,
 		default:
 			dev_err(dev, "Unsupported PHY mode %s!\n",
 				phy_modes(ports[i].phy_mode));
+			return -EINVAL;
 		}
 
 		/* Even though the SerDes port is able to drive SGMII autoneg
@@ -336,6 +338,13 @@ static int sja1105_init_l2_lookup_params(struct sja1105_private *priv)
 	return 0;
 }
 
+/* Set up a default VLAN for untagged traffic injected from the CPU
+ * using management routes (e.g. STP, PTP) as opposed to tag_8021q.
+ * All DT-defined ports are members of this VLAN, and there are no
+ * restrictions on forwarding (since the CPU selects the destination).
+ * Frames from this VLAN will always be transmitted as untagged, and
+ * neither the bridge nor the 8021q module cannot create this VLAN ID.
+ */
 static int sja1105_init_static_vlan(struct sja1105_private *priv)
 {
 	struct sja1105_table *table;
@@ -345,17 +354,13 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 		.vmemb_port = 0,
 		.vlan_bc = 0,
 		.tag_port = 0,
-		.vlanid = 1,
+		.vlanid = SJA1105_DEFAULT_VLAN,
 	};
 	struct dsa_switch *ds = priv->ds;
 	int port;
 
 	table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];
 
-	/* The static VLAN table will only contain the initial pvid of 1.
-	 * All other VLANs are to be configured through dynamic entries,
-	 * and kept in the static configuration table as backing memory.
-	 */
 	if (table->entry_count) {
 		kfree(table->entries);
 		table->entry_count = 0;
@@ -368,9 +373,6 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 
 	table->entry_count = 1;
 
-	/* VLAN 1: all DT-defined ports are members; no restrictions on
-	 * forwarding; always transmit as untagged.
-	 */
 	for (port = 0; port < ds->num_ports; port++) {
 		struct sja1105_bridge_vlan *v;
 
@@ -381,15 +383,12 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
 		pvid.vlan_bc |= BIT(port);
 		pvid.tag_port &= ~BIT(port);
 
-		/* Let traffic that don't need dsa_8021q (e.g. STP, PTP) be
-		 * transmitted as untagged.
-		 */
 		v = kzalloc(sizeof(*v), GFP_KERNEL);
 		if (!v)
 			return -ENOMEM;
 
 		v->port = port;
-		v->vid = 1;
+		v->vid = SJA1105_DEFAULT_VLAN;
 		v->untagged = true;
 		if (dsa_is_cpu_port(ds, port))
 			v->pvid = true;
@@ -2854,11 +2853,22 @@ static int sja1105_vlan_add_one(struct dsa_switch *ds, int port, u16 vid,
 	bool pvid = flags & BRIDGE_VLAN_INFO_PVID;
 	struct sja1105_bridge_vlan *v;
 
-	list_for_each_entry(v, vlan_list, list)
-		if (v->port == port && v->vid == vid &&
-		    v->untagged == untagged && v->pvid == pvid)
+	list_for_each_entry(v, vlan_list, list) {
+		if (v->port == port && v->vid == vid) {
 			/* Already added */
-			return 0;
+			if (v->untagged == untagged && v->pvid == pvid)
+				/* Nothing changed */
+				return 0;
+
+			/* It's the same VLAN, but some of the flags changed
+			 * and the user did not bother to delete it first.
+			 * Update it and trigger sja1105_build_vlan_table.
+			 */
+			v->untagged = untagged;
+			v->pvid = pvid;
+			return 1;
+		}
+	}
 
 	v = kzalloc(sizeof(*v), GFP_KERNEL);
 	if (!v) {
@@ -3013,13 +3023,13 @@ static int sja1105_setup(struct dsa_switch *ds)
 	rc = sja1105_static_config_load(priv, ports);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to load static config: %d\n", rc);
-		return rc;
+		goto out_ptp_clock_unregister;
 	}
 	/* Configure the CGU (PHY link modes and speeds) */
 	rc = priv->info->clocking_setup(priv);
 	if (rc < 0) {
 		dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
-		return rc;
+		goto out_static_config_free;
 	}
 	/* On SJA1105, VLAN filtering per se is always enabled in hardware.
 	 * The only thing we can do to disable it is lie about what the 802.1Q
@@ -3040,7 +3050,7 @@ static int sja1105_setup(struct dsa_switch *ds)
 
 	rc = sja1105_devlink_setup(ds);
 	if (rc < 0)
-		return rc;
+		goto out_static_config_free;
 
 	/* The DSA/switchdev model brings up switch ports in standalone mode by
 	 * default, and that means vlan_filtering is 0 since they're not under
@@ -3049,6 +3059,17 @@ static int sja1105_setup(struct dsa_switch *ds)
 	rtnl_lock();
 	rc = sja1105_setup_8021q_tagging(ds, true);
 	rtnl_unlock();
+	if (rc)
+		goto out_devlink_teardown;
+
+	return 0;
+
+out_devlink_teardown:
+	sja1105_devlink_teardown(ds);
+out_ptp_clock_unregister:
+	sja1105_ptp_clock_unregister(ds);
+out_static_config_free:
+	sja1105_static_config_free(&priv->static_config);
 
 	return rc;
 }
@@ -3712,8 +3733,10 @@ static int sja1105_probe(struct spi_device *spi)
 		priv->cbs = devm_kcalloc(dev, priv->info->num_cbs_shapers,
 					 sizeof(struct sja1105_cbs_entry),
 					 GFP_KERNEL);
-		if (!priv->cbs)
-			return -ENOMEM;
+		if (!priv->cbs) {
+			rc = -ENOMEM;
+			goto out_unregister_switch;
+		}
 	}
 
 	/* Connections between dsa_port and sja1105_port */
@@ -3738,7 +3761,7 @@ static int sja1105_probe(struct spi_device *spi)
 			dev_err(ds->dev,
 				"failed to create deferred xmit thread: %d\n",
 				rc);
-			goto out;
+			goto out_destroy_workers;
 		}
 		skb_queue_head_init(&sp->xmit_queue);
 		sp->xmit_tpid = ETH_P_SJA1105;
@@ -3748,7 +3771,8 @@ static int sja1105_probe(struct spi_device *spi)
 	}
 
 	return 0;
-out:
+
+out_destroy_workers:
 	while (port-- > 0) {
 		struct sja1105_port *sp = &priv->ports[port];
 
@@ -3757,6 +3781,10 @@ out:
 
 		kthread_destroy_worker(sp->xmit_worker);
 	}
+
+out_unregister_switch:
+	dsa_unregister_switch(ds);
+
 	return rc;
 }