ARM: 7035/1: mach-ks8695: move GPIO driver to GPIO subsystem

As per example from the other ARM boards, push the KS8695 GPIO
driver down to the GPIO subsystem so it can be consolidated.

Cc: zeal <zealcook@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Acked-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 318 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
new file mode 100644
index 000000000000..b3fdfe1d262f
--- /dev/null
+++ b/drivers/gpio/gpio-ks8695.c
@@ -0,0 +1,318 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ *                     Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_5)	/* only GPIO 0..5 have internal functions */
+		return;
+
+	local_irq_save(flags);
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	if (gpio)			/* GPIO: set bit to 0 */
+		x &= ~enable[pin];
+	else				/* Internal function: set bit to 1 */
+		x |= enable[pin];
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+	local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	/* Set IRQ triggering type */
+	irq_set_irq_type(gpio_irq[pin], type);
+
+	/* enable interrupt mode */
+	ks8695_gpio_mode(pin, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	/* set pin as output */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x |= IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+				  unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return;
+
+	local_irq_save(flags);
+
+	/* set output line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	return (x & IOPD(pin)) != 0;
+}
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
+{
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	return gpio_irq[pin];
+}
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+	if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+		return -EINVAL;
+
+	return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+	.label			= "KS8695",
+	.direction_input	= ks8695_gpio_direction_input,
+	.direction_output	= ks8695_gpio_direction_output,
+	.get			= ks8695_gpio_get_value,
+	.set			= ks8695_gpio_set_value,
+	.to_irq			= ks8695_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+	.can_sleep		= 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+	if (gpiochip_add(&ks8695_gpio_chip))
+		printk(KERN_ERR "Unable to register core GPIOs\n");
+}
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+	unsigned long mode, ctrl, data;
+	int i;
+
+	mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+	seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+		seq_printf(s, "%i:\t", i);
+
+		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
+
+		if (i <= KS8695_GPIO_3) {
+			if (ctrl & enable[i]) {
+				seq_printf(s, "EXT%i ", i);
+
+				switch ((ctrl & intmask[i]) >> (4 * i)) {
+					case IOPC_TM_LOW:
+						seq_printf(s, "(Low)");		break;
+					case IOPC_TM_HIGH:
+						seq_printf(s, "(High)");	break;
+					case IOPC_TM_RISING:
+						seq_printf(s, "(Rising)");	break;
+					case IOPC_TM_FALLING:
+						seq_printf(s, "(Falling)");	break;
+					case IOPC_TM_EDGE:
+						seq_printf(s, "(Edges)");	break;
+				}
+			}
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else if (i <= KS8695_GPIO_5) {
+			if (ctrl & enable[i])
+				seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else
+			seq_printf(s, "GPIO\t");
+
+		seq_printf(s, "\t");
+
+		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
+	}
+	return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+	.open		= ks8695_gpio_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+	/* /sys/kernel/debug/ks8695_gpio */
+	(void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+	return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif