Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

7 files changed, 188 insertions, 57 deletions

diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
index 71fd29348f28..38931dbd1eff 100644
--- a/drivers/clk/mmp/clk-mmp2.c
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -17,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x0
@@ -74,7 +72,8 @@ static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
 static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	struct clk *clk;
 	struct clk *vctcxo;
@@ -82,19 +81,19 @@ void __init mmp2_clk_init(void)
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
index 75244915df05..0dd83fb950c9 100644
--- a/drivers/clk/mmp/clk-pxa168.c
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -17,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x28
@@ -67,7 +65,8 @@ static const char *disp_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	struct clk *clk;
 	struct clk *uart_pll;
@@ -75,19 +74,19 @@ void __init pxa168_clk_init(void)
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
index 37ba04ba1368..e1d2ce22cdf1 100644
--- a/drivers/clk/mmp/clk-pxa910.c
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -17,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x28
@@ -65,7 +63,8 @@ static const char *disp_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	struct clk *clk;
 	struct clk *uart_pll;
@@ -74,25 +73,25 @@ void __init pxa910_clk_init(void)
 	void __iomem *apbcp_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+	apbcp_base = ioremap(apbcp_phys, SZ_4K);
 	if (apbcp_base == NULL) {
 		pr_err("error to ioremap APBC extension base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;
diff --git a/drivers/clk/pxa/clk-pxa25x.c b/drivers/clk/pxa/clk-pxa25x.c
index 542e45ef5087..b7747229db9a 100644
--- a/drivers/clk/pxa/clk-pxa25x.c
+++ b/drivers/clk/pxa/clk-pxa25x.c
@@ -17,7 +17,6 @@
 #include <linux/clkdev.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/pxa25x.h>
 #include <mach/pxa2xx-regs.h>
 
 #include <dt-bindings/clock/pxa-clock.h>
diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig
index fc50b6264bed..a6da2aa09f83 100644
--- a/drivers/clk/versatile/Kconfig
+++ b/drivers/clk/versatile/Kconfig
@@ -1,6 +1,9 @@
 config COMMON_CLK_VERSATILE
 	bool "Clock driver for ARM Reference designs"
-	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 || COMPILE_TEST
+	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || \
+		ARCH_VERSATILE || ARCH_VEXPRESS || ARM64 || \
+		COMPILE_TEST
+	select REGMAP_MMIO
 	---help---
           Supports clocking on ARM Reference designs:
 	  - Integrator/AP and Integrator/CP
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 08c5ee976879..e62f8cb2c9b5 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -3,7 +3,7 @@
  * We wrap the custom interface from <asm/hardware/icst.h> into the generic
  * clock framework.
  *
- * Copyright (C) 2012 Linus Walleij
+ * Copyright (C) 2012-2015 Linus Walleij
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,9 +19,14 @@
 #include <linux/err.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #include "clk-icst.h"
 
+/* Magic unlocking token used on all Versatile boards */
+#define VERSATILE_LOCK_VAL	0xA05F
+
 /**
  * struct clk_icst - ICST VCO clock wrapper
  * @hw: corresponding clock hardware entry
@@ -32,8 +37,9 @@
  */
 struct clk_icst {
 	struct clk_hw hw;
-	void __iomem *vcoreg;
-	void __iomem *lockreg;
+	struct regmap *map;
+	u32 vcoreg_off;
+	u32 lockreg_off;
 	struct icst_params *params;
 	unsigned long rate;
 };
@@ -41,53 +47,67 @@ struct clk_icst {
 #define to_icst(_hw) container_of(_hw, struct clk_icst, hw)
 
 /**
- * vco_get() - get ICST VCO settings from a certain register
- * @vcoreg: register containing the VCO settings
+ * vco_get() - get ICST VCO settings from a certain ICST
+ * @icst: the ICST clock to get
+ * @vco: the VCO struct to return the value in
  */
-static struct icst_vco vco_get(void __iomem *vcoreg)
+static int vco_get(struct clk_icst *icst, struct icst_vco *vco)
 {
 	u32 val;
-	struct icst_vco vco;
+	int ret;
 
-	val = readl(vcoreg);
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 03;
-	return vco;
+	ret = regmap_read(icst->map, icst->vcoreg_off, &val);
+	if (ret)
+		return ret;
+	vco->v = val & 0x1ff;
+	vco->r = (val >> 9) & 0x7f;
+	vco->s = (val >> 16) & 03;
+	return 0;
 }
 
 /**
  * vco_set() - commit changes to an ICST VCO
- * @locreg: register to poke to unlock the VCO for writing
- * @vcoreg: register containing the VCO settings
- * @vco: ICST VCO parameters to commit
+ * @icst: the ICST clock to set
+ * @vco: the VCO struct to set the changes from
  */
-static void vco_set(void __iomem *lockreg,
-			void __iomem *vcoreg,
-			struct icst_vco vco)
+static int vco_set(struct clk_icst *icst, struct icst_vco vco)
 {
 	u32 val;
+	int ret;
 
-	val = readl(vcoreg) & ~0x7ffff;
+	ret = regmap_read(icst->map, icst->vcoreg_off, &val);
+	if (ret)
+		return ret;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	/* This magic unlocks the VCO so it can be controlled */
-	writel(0xa05f, lockreg);
-	writel(val, vcoreg);
+	ret = regmap_write(icst->map, icst->lockreg_off, VERSATILE_LOCK_VAL);
+	if (ret)
+		return ret;
+	ret = regmap_write(icst->map, icst->vcoreg_off, val);
+	if (ret)
+		return ret;
 	/* This locks the VCO again */
-	writel(0, lockreg);
+	ret = regmap_write(icst->map, icst->lockreg_off, 0);
+	if (ret)
+		return ret;
+	return 0;
 }
 
-
 static unsigned long icst_recalc_rate(struct clk_hw *hw,
 				      unsigned long parent_rate)
 {
 	struct clk_icst *icst = to_icst(hw);
 	struct icst_vco vco;
+	int ret;
 
 	if (parent_rate)
 		icst->params->ref = parent_rate;
-	vco = vco_get(icst->vcoreg);
+	ret = vco_get(icst, &vco);
+	if (ret) {
+		pr_err("ICST: could not get VCO setting\n");
+		return 0;
+	}
 	icst->rate = icst_hz(icst->params, vco);
 	return icst->rate;
 }
@@ -112,8 +132,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
 		icst->params->ref = parent_rate;
 	vco = icst_hz_to_vco(icst->params, rate);
 	icst->rate = icst_hz(icst->params, vco);
-	vco_set(icst->lockreg, icst->vcoreg, vco);
-	return 0;
+	return vco_set(icst, vco);
 }
 
 static const struct clk_ops icst_ops = {
@@ -122,11 +141,11 @@ static const struct clk_ops icst_ops = {
 	.set_rate = icst_set_rate,
 };
 
-struct clk *icst_clk_register(struct device *dev,
-			const struct clk_icst_desc *desc,
-			const char *name,
-			const char *parent_name,
-			void __iomem *base)
+static struct clk *icst_clk_setup(struct device *dev,
+				  const struct clk_icst_desc *desc,
+				  const char *name,
+				  const char *parent_name,
+				  struct regmap *map)
 {
 	struct clk *clk;
 	struct clk_icst *icst;
@@ -151,10 +170,11 @@ struct clk *icst_clk_register(struct device *dev,
 	init.flags = CLK_IS_ROOT;
 	init.parent_names = (parent_name ? &parent_name : NULL);
 	init.num_parents = (parent_name ? 1 : 0);
+	icst->map = map;
 	icst->hw.init = &init;
 	icst->params = pclone;
-	icst->vcoreg = base + desc->vco_offset;
-	icst->lockreg = base + desc->lock_offset;
+	icst->vcoreg_off = desc->vco_offset;
+	icst->lockreg_off = desc->lock_offset;
 
 	clk = clk_register(dev, &icst->hw);
 	if (IS_ERR(clk)) {
@@ -164,4 +184,112 @@ struct clk *icst_clk_register(struct device *dev,
 
 	return clk;
 }
+
+struct clk *icst_clk_register(struct device *dev,
+			const struct clk_icst_desc *desc,
+			const char *name,
+			const char *parent_name,
+			void __iomem *base)
+{
+	struct regmap_config icst_regmap_conf = {
+		.reg_bits = 32,
+		.val_bits = 32,
+		.reg_stride = 4,
+	};
+	struct regmap *map;
+
+	map = regmap_init_mmio(dev, base, &icst_regmap_conf);
+	if (IS_ERR(map)) {
+		pr_err("could not initialize ICST regmap\n");
+		return ERR_CAST(map);
+	}
+	return icst_clk_setup(dev, desc, name, parent_name, map);
+}
 EXPORT_SYMBOL_GPL(icst_clk_register);
+
+#ifdef CONFIG_OF
+/*
+ * In a device tree, an memory-mapped ICST clock appear as a child
+ * of a syscon node. Assume this and probe it only as a child of a
+ * syscon.
+ */
+
+static const struct icst_params icst525_params = {
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min		= 8,
+	.vd_max		= 263,
+	.rd_min		= 3,
+	.rd_max		= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct icst_params icst307_params = {
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
+};
+
+static void __init of_syscon_icst_setup(struct device_node *np)
+{
+	struct device_node *parent;
+	struct regmap *map;
+	struct clk_icst_desc icst_desc;
+	const char *name = np->name;
+	const char *parent_name;
+	struct clk *regclk;
+
+	/* We do not release this reference, we are using it perpetually */
+	parent = of_get_parent(np);
+	if (!parent) {
+		pr_err("no parent node for syscon ICST clock\n");
+		return;
+	}
+	map = syscon_node_to_regmap(parent);
+	if (IS_ERR(map)) {
+		pr_err("no regmap for syscon ICST clock parent\n");
+		return;
+	}
+
+	if (of_property_read_u32(np, "vco-offset", &icst_desc.vco_offset)) {
+		pr_err("no VCO register offset for ICST clock\n");
+		return;
+	}
+	if (of_property_read_u32(np, "lock-offset", &icst_desc.lock_offset)) {
+		pr_err("no lock register offset for ICST clock\n");
+		return;
+	}
+
+	if (of_device_is_compatible(np, "arm,syscon-icst525"))
+		icst_desc.params = &icst525_params;
+	else if (of_device_is_compatible(np, "arm,syscon-icst307"))
+		icst_desc.params = &icst307_params;
+	else {
+		pr_err("unknown ICST clock %s\n", name);
+		return;
+	}
+
+	/* Parent clock name is not the same as node parent */
+	parent_name = of_clk_get_parent_name(np, 0);
+
+	regclk = icst_clk_setup(NULL, &icst_desc, name, parent_name, map);
+	if (IS_ERR(regclk)) {
+		pr_err("error setting up syscon ICST clock %s\n", name);
+		return;
+	}
+	of_clk_add_provider(np, of_clk_src_simple_get, regclk);
+	pr_debug("registered syscon ICST clock %s\n", name);
+}
+
+CLK_OF_DECLARE(arm_syscon_icst525_clk,
+	       "arm,syscon-icst525", of_syscon_icst_setup);
+CLK_OF_DECLARE(arm_syscon_icst307_clk,
+	       "arm,syscon-icst307", of_syscon_icst_setup);
+
+#endif
diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c
index 86f70997d59d..bd4dd2463e23 100644
--- a/drivers/clk/versatile/clk-realview.c
+++ b/drivers/clk/versatile/clk-realview.c
@@ -11,11 +11,15 @@
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
 #include "clk-icst.h"
 
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+
 /*
  * Implementation of the ARM RealView clock trees.
  */