Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 38 insertions, 0 deletions

diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index b6015cb4fc01..806d80366c54 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -290,6 +290,14 @@
 /* Tegra CPU clock and reset control regs */
 #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS	0x470
 
+#ifdef CONFIG_PM_SLEEP
+static struct cpu_clk_suspend_context {
+	u32 clk_csite_src;
+	u32 cclkg_burst;
+	u32 cclkg_divider;
+} tegra114_cpu_clk_sctx;
+#endif
+
 static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
 
 static void __iomem *clk_base;
@@ -2142,9 +2150,39 @@ static void tegra114_disable_cpu_clock(u32 cpu)
 	/* flow controller would take care in the power sequence. */
 }
 
+#ifdef CONFIG_PM_SLEEP
+static void tegra114_cpu_clock_suspend(void)
+{
+	/* switch coresite to clk_m, save off original source */
+	tegra114_cpu_clk_sctx.clk_csite_src =
+				readl(clk_base + CLK_SOURCE_CSITE);
+	writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
+
+	tegra114_cpu_clk_sctx.cclkg_burst =
+				readl(clk_base + CCLKG_BURST_POLICY);
+	tegra114_cpu_clk_sctx.cclkg_divider =
+				readl(clk_base + CCLKG_BURST_POLICY + 4);
+}
+
+static void tegra114_cpu_clock_resume(void)
+{
+	writel(tegra114_cpu_clk_sctx.clk_csite_src,
+					clk_base + CLK_SOURCE_CSITE);
+
+	writel(tegra114_cpu_clk_sctx.cclkg_burst,
+					clk_base + CCLKG_BURST_POLICY);
+	writel(tegra114_cpu_clk_sctx.cclkg_divider,
+					clk_base + CCLKG_BURST_POLICY + 4);
+}
+#endif
+
 static struct tegra_cpu_car_ops tegra114_cpu_car_ops = {
 	.wait_for_reset	= tegra114_wait_cpu_in_reset,
 	.disable_clock	= tegra114_disable_cpu_clock,
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= tegra114_cpu_clock_suspend,
+	.resume		= tegra114_cpu_clock_resume,
+#endif
 };
 
 static const struct of_device_id pmc_match[] __initconst = {