Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:

 - Bartlomiej added pata_falcon

 - Christoph is trying to remove use of static 4k buf.  It's still WIP

 - config cleanup around HAS_DMA

 - other fixes and driver-specific changes

* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits)
  ata: pata_of_platform: using of_property_read_u32() helper
  pata_atiixp: Don't use unconnected secondary port on SB600/SB700
  libata-sff: Don't scan disabled ports when checking for legacy mode.
  pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode()
  ahci: qoriq: added ls2088a platforms support
  ahci: qoriq: report error when ecc register address is missing in dts
  ahci: qoriq: added a condition to enable dma coherence
  Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf"
  ahci: imx: fix building without hwmon or thermal
  ata: add Atari Falcon PATA controller driver
  ata: pass queued command to ->sff_data_xfer method
  ata: allow subsystem to be used on m68k arch
  libata: switch to dynamic allocation instead of ata_scsi_rbuf
  libata: don't call ata_scsi_rbuf_fill for command without a response buffer
  libata: call ->scsi_done from ata_scsi_simulate
  libata: remove the done callback from ata_scsi_args
  libata: move struct ata_scsi_args to libata-scsi.c
  libata: avoid global response buffer in atapi_qc_complete
  libata-eh: Use switch() instead of sparse array for protocol strings
  ata: sata_mv: Convert to devm_ioremap_resource()
  ...

1 files changed, 184 insertions, 0 deletions

diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
new file mode 100644
index 000000000000..5b0c57d1c59f
--- /dev/null
+++ b/drivers/ata/pata_falcon.c
@@ -0,0 +1,184 @@
+/*
+ * Atari Falcon PATA controller driver
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on falconide.c:
+ *
+ *     Created 12 Jul 1997 by Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stdma.h>
+#include <asm/ide.h>
+
+#define DRV_NAME "pata_falcon"
+#define DRV_VERSION "0.1.0"
+
+#define ATA_HD_BASE	0xfff00000
+#define ATA_HD_CONTROL	0x39
+
+static struct scsi_host_template pata_falcon_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
+					  unsigned char *buf,
+					  unsigned int buflen, int rw)
+{
+	struct ata_device *dev = qc->dev;
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1;
+	struct scsi_cmnd *cmd = qc->scsicmd;
+	bool swap = 1;
+
+	if (dev->class == ATA_DEV_ATA && cmd && cmd->request &&
+	    !blk_rq_is_passthrough(cmd->request))
+		swap = 0;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ) {
+		if (swap)
+			raw_insw_swapw((u16 *)data_addr, (u16 *)buf, words);
+		else
+			raw_insw((u16 *)data_addr, (u16 *)buf, words);
+	} else {
+		if (swap)
+			raw_outsw_swapw((u16 *)data_addr, (u16 *)buf, words);
+		else
+			raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+	}
+
+	/* Transfer trailing byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		unsigned char pad[2] = { };
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - 1;
+
+		if (rw == READ) {
+			if (swap)
+				raw_insw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+			else
+				raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+			*buf = pad[0];
+		} else {
+			pad[0] = *buf;
+			if (swap)
+				raw_outsw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+			else
+				raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_falcon_set_mode(struct ata_link *link,
+				struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+static struct ata_port_operations pata_falcon_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_falcon_data_xfer,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_falcon_set_mode,
+};
+
+static int pata_falcon_init_one(void)
+{
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct platform_device *pdev;
+	void __iomem *base;
+
+	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
+		return -ENODEV;
+
+	pr_info(DRV_NAME ": Atari Falcon PATA controller\n");
+
+	pdev = platform_device_register_simple(DRV_NAME, 0, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	if (!devm_request_mem_region(&pdev->dev, ATA_HD_BASE, 0x40, DRV_NAME)) {
+		pr_err(DRV_NAME ": resources busy\n");
+		return -EBUSY;
+	}
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_falcon_ops;
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+	ap->flags |= ATA_FLAG_PIO_POLLING;
+
+	base = (void __iomem *)ATA_HD_BASE;
+	ap->ioaddr.data_addr		= base;
+	ap->ioaddr.error_addr		= base + 1 + 1 * 4;
+	ap->ioaddr.feature_addr		= base + 1 + 1 * 4;
+	ap->ioaddr.nsect_addr		= base + 1 + 2 * 4;
+	ap->ioaddr.lbal_addr		= base + 1 + 3 * 4;
+	ap->ioaddr.lbam_addr		= base + 1 + 4 * 4;
+	ap->ioaddr.lbah_addr		= base + 1 + 5 * 4;
+	ap->ioaddr.device_addr		= base + 1 + 6 * 4;
+	ap->ioaddr.status_addr		= base + 1 + 7 * 4;
+	ap->ioaddr.command_addr		= base + 1 + 7 * 4;
+
+	ap->ioaddr.altstatus_addr	= base + ATA_HD_CONTROL;
+	ap->ioaddr.ctl_addr		= base + ATA_HD_CONTROL;
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
+		      (unsigned long)base + ATA_HD_CONTROL);
+
+	/* activate */
+	return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
+}
+
+module_init(pata_falcon_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);