diff options
author | Paul Mundt <lethal@linux-sh.org> | 2007-02-14 15:06:09 +0900 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2007-02-14 15:06:09 +0900 |
commit | e65fa9f59e9230b72ac298d445b4a18a4eefeb34 (patch) | |
tree | 402036274b557da72a93b17fffc95f41c3137704 /arch | |
parent | 71074d3a2c70aa8a213222fef5014bfd9b3daf1f (diff) |
sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/sh/Kconfig | 11 | ||||
-rw-r--r-- | arch/sh/Makefile | 2 | ||||
-rw-r--r-- | arch/sh/boards/bigsur/Makefile | 6 | ||||
-rw-r--r-- | arch/sh/boards/bigsur/io.c | 120 | ||||
-rw-r--r-- | arch/sh/boards/bigsur/irq.c | 334 | ||||
-rw-r--r-- | arch/sh/boards/bigsur/led.c | 54 | ||||
-rw-r--r-- | arch/sh/boards/bigsur/setup.c | 88 | ||||
-rw-r--r-- | arch/sh/boards/ec3104/Makefile | 6 | ||||
-rw-r--r-- | arch/sh/boards/ec3104/io.c | 81 | ||||
-rw-r--r-- | arch/sh/boards/ec3104/irq.c | 196 | ||||
-rw-r--r-- | arch/sh/boards/ec3104/setup.c | 65 | ||||
-rw-r--r-- | arch/sh/drivers/pci/Makefile | 1 | ||||
-rw-r--r-- | arch/sh/drivers/pci/ops-bigsur.c | 83 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci-sh7751.c | 9 | ||||
-rw-r--r-- | arch/sh/tools/mach-types | 1 |
15 files changed, 1 insertions, 1056 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 90c8c42e7e8b..4d16d8917074 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -135,12 +135,6 @@ config SH_HP6XX More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_EC3104 - bool "EC3104" - help - Select EC3104 if configuring for a system with an Eclipse - International EC3104 chip, e.g. the Harris AD2000. - config SH_SATURN bool "Saturn" select CPU_SUBTYPE_SH7604 @@ -156,9 +150,6 @@ config SH_DREAMCAST <http://www.m17n.org/linux-sh/dreamcast/>. There is a Dreamcast project is at <http://linuxdc.sourceforge.net/>. -config SH_BIGSUR - bool "BigSur" - config SH_MPC1211 bool "Interface MPC1211" help @@ -511,7 +502,7 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ - SH_BIGSUR || SOLUTION_ENGINE || \ + SOLUTION_ENGINE || \ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ SH_R7780RP help diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4903c7c665a9..bd9b1729f8b8 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -94,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_BIGSUR) := bigsur machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497ac58e..000000000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f97eec3..000000000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<<BIGSUR_IOMAP_LO_SHIFT)-1) -#define BIGSUR_IOMAP_LO_NMAP (BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<<BIGSUR_IOMAP_HI_SHIFT)-1) -#define BIGSUR_IOMAP_HI_NMAP (BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - pr_debug(" maplo[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da36382..000000000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++) - make_bigsur_l1isr(i); - - printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n", - BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH); - - for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++) - make_bigsur_l2isr(i); - - printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n", - BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH); - -} diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c deleted file mode 100644 index d221439aafcc..000000000000 --- a/arch/sh/boards/bigsur/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/bigsur/led.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from led_se.c and led.c, which bore the message: - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -} -#endif /* CONFIG_HEARTBEAT */ - diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c deleted file mode 100644 index 9711c20fc9e4..000000000000 --- a/arch/sh/boards/bigsur/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 178891534b67..000000000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394b280b..000000000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/ec3104/ec3104.h> - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1f090f..000000000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/ec3104/ec3104.h> - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1<<bit))) - p += sprintf(p, "%s ", ec3104_name(bit)); - - p += sprintf(p, ")\n"); - - return p - buf; -} - -static inline u32 ec3104_irq2mask(unsigned int irq) -{ - return (1 << (irq - EC3104_IRQBASE)); -} - -static inline void mask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask |= ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static inline void unmask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask &= ~ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static void disable_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void enable_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); -} - -static void mask_and_ack_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void end_ec3104_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_ec3104_irq(irq); -} - -static unsigned int startup_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); - - return 0; -} - -static void shutdown_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); - -} - -static struct hw_interrupt_type ec3104_int = { - .typename = "EC3104", - .enable = enable_ec3104_irq, - .disable = disable_ec3104_irq, - .ack = mask_and_ack_ec3104_irq, - .end = end_ec3104_irq, - .startup = startup_ec3104_irq, - .shutdown = shutdown_ec3104_irq, -}; - -/* Yuck. the _demux API is ugly */ -int ec3104_irq_demux(int irq) -{ - if (irq == EC3104_IRQ) { - unsigned int mask; - - mask = ctrl_readl(EC3104_IRR); - - if (mask == 0xffffffff) - return EC3104_IRQ; - else - return EC3104_IRQBASE + ffz(mask); - } - - return irq; -} diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c deleted file mode 100644 index 902bc975a13e..000000000000 --- a/arch/sh/boards/ec3104/setup.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/setup.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/mach/ec3104.h> - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 9e00cb8a39e9..cc8d0d0b1427 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o -obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c deleted file mode 100644 index eb31be751524..000000000000 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-bigsur.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Ported to new API by Paul Mundt <lethal@linux-sh.org>. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi Big Sur Evaluation Board - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/io.h> -#include "pci-sh4.h" -#include <asm/bigsur/bigsur.h> - -#define BIGSUR_PCI_IO 0x4000 -#define BIGSUR_PCI_MEM 0xfd000000 - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = BIGSUR_PCI_IO, - .end = BIGSUR_PCI_IO + (64*1024) - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = BIGSUR_PCI_MEM, - .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR1_SIZE, - }, -}; - -/* - * Initialize the Big Sur PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&sh7751_pci_map); -} - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI - * interface is on the wrong end of the board so that it can also - * support a V320 CPI interface chip... Therefor the IRQ mapping is - * somewhat use dependent... I'l assume a linear map for now, i.e. - * INTA=slot0,pin0... INTD=slot3,pin0... - */ - int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; - - PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", - slot, pin-1+'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 85e1ee2e2e7b..9ddff760d3c6 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) PCIBIOS_MIN_IO, (64 << 10), SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* - * XXX: For now, leave this board-specific. In the event we have other - * boards that need to do similar work, this can be wrapped. - */ -#ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); -#endif - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0571755e9a84..4fe0f94cbf42 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -16,7 +16,6 @@ HD64461 HD64461 HD64465 HD64465 SATURN SH_SATURN DREAMCAST SH_DREAMCAST -BIGSUR SH_BIGSUR MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP |