Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
  Blackfin: Convert BUG() to use unreachable()
  Blackfin: define __NR_recvmmsg
  Blackfin: drop duplicate sched_clock
  Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
  Blackfin: MPU: add missing __init markings
  Blackfin: add support for TIF_NOTIFY_RESUME
  Blackfin: kgdb_test: clean up code a bit
  Blackfin: convert kgdbtest to proc_fops
  Blackfin: convert cyc2ns() to clocksource_cyc2ns()
  Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
  Blackfin: drop unused ax88180 resources
  Blackfin: bf537-stamp: add ADF702x network driver resources
  Blackfin: bf537-stamp: add CAN resources
  Blackfin: bf537-stamp: add AD5258 i2c address
  Blackfin: bf537-stamp: add adau1761 i2c address
  Blackfin: bf537-stamp: add adau1371 i2c address
  Blackfin: bf537-stamp: add ADP8870 resources
  Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
  Blackfin: bf537-stamp: update ADP5520 resources
  Blackfin: bf537-stamp: add ADXL346 orientation sensing support
  ...

1 files changed, 1 insertions, 114 deletions

diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 02b328eb0e07..e9ff491c0953 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -370,72 +370,6 @@
 /* System MMR Register Bits */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN			0x0000  /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2			0x0001  /* Pass CLKIN/2 to PLL */
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF				0x0002  /* Shut off PLL clocks */
-#define STOPCK_OFF			0x0008  /* Core clock off */
-#define STOPCK				0x0008	/* Core Clock Off									*/
-#define PDWN				0x0020  /* Put the PLL in a Deep Sleep state */
-#if !defined(__ADSPBF538__)
-/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
-# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
-# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
-#endif
-#define BYPASS				0x0100  /* Bypass the PLL */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks */
-#define SSEL				0x000F	/* System Select						*/
-#define	CSEL				0x0030	/* Core Select							*/
-
-#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
-
-#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
-#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
-#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
-#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
-
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
-#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
-
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
 #define CHIPID_FAMILY          0x0FFFF000
@@ -703,54 +637,7 @@
 
 /* **********  DMA CONTROLLER MASKS  *********************8 */
 
-/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN	        0x00000001	/* Channel Enable */
-#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
-#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
-#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
-#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
-#define DMA2D	        0x00000010	/* 2D/1D* Mode */
-#define RESTART         0x00000020	/* Restart */
-#define DI_SEL	        0x00000040	/* Data Interrupt Select */
-#define DI_EN	        0x00000080	/* Data Interrupt Enable */
-#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
-#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
-#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
-#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
-#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
-#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
-#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
-#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
-#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
-#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
-#define NDSIZE	        0x00000900	/* Next Descriptor Size */
-#define DMAFLOW	        0x00007000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
-
-#define DMAEN_P	            	0	/* Channel Enable */
-#define WNR_P	            	1	/* Channel Direction (W/R*) */
-#define DMA2D_P	        	4	/* 2D/1D* Mode */
-#define RESTART_P	      	5	/* Restart */
-#define DI_SEL_P	     	6	/* Data Interrupt Select */
-#define DI_EN_P	            	7	/* Data Interrupt Enable */
-
-/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE		0x00000001	/* DMA Done Indicator */
-#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
-#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
-#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */
-
-#define DMA_DONE_P	    	0	/* DMA Done Indicator */
-#define DMA_ERR_P     		1	/* DMA Error Indicator */
-#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
-#define DMA_RUN_P     		3	/* DMA Running Indicator */
-
-/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
 
 #define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
 #define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */