Merge tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC 64-bit changes and additions from Olof Johansson:
 "The 64-bit set of updates this release cycle adds support for three
  new platforms:

   - Samsunc Exynos 7
   - Freescale LS2085a
   - Mediatek MT8173

  For all these, the changes mostly consititude additions of DT
  contents, but also some Kconfig entries to allow dependency/selection
  of drivers per-platform, etc"

* tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA*
  arm64: Fix sort of platform Kconfig entries
  arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig
  arm64: Add DTS support for FSL's LS2085A SoC
  arm64: mediatek: Add MT8173 SoC Kconfig and defconfig
  arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile
  Document: DT: Add bindings for mediatek MT8173 SoC Platform
  arm64: Add Tegra132 support
  arm64: Enable ARMv8 based exynos7 SoC support
  arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7
  arm64: dts: Add PMU DT node for exynos7 SoC
  arm64: dts: Add initial pinctrl support to exynos7
  arm64: dts: Add initial device tree support for exynos7

11 files changed, 1654 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c62b0f4d9ef6..e0350caf049e 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -2,5 +2,8 @@ dts-dirs += amd
 dts-dirs += apm
 dts-dirs += arm
 dts-dirs += cavium
+dts-dirs += exynos
+dts-dirs += freescale
+dts-dirs += mediatek
 
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
new file mode 100644
index 000000000000..20310e5b6d6f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 000000000000..5424cc450f72
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,84 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	aliases {
+		serial0 = &serial_2;
+		mshc0 = &mmc_0;
+		mshc2 = &mmc_2;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xC0000000>;
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
new file mode 100644
index 000000000000..2eef4a279131
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -0,0 +1,588 @@
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_ds: sd0-ds {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_ds: sd1-ds {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_qrdy: sd1-qrdy {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 000000000000..d7a37c3a6b52
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,530 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_bus0;
+		pinctrl2 = &pinctrl_nfc;
+		pinctrl3 = &pinctrl_touch;
+		pinctrl4 = &pinctrl_ff;
+		pinctrl5 = &pinctrl_ese;
+		pinctrl6 = &pinctrl_fsys0;
+		pinctrl7 = &pinctrl_fsys1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		fin_pll: xxti {
+			compatible = "fixed-clock";
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg =	<0x11001000 0x1000>,
+				<0x11002000 0x1000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_top1: clock-controller@105e0000 {
+			compatible = "samsung,exynos7-clock-top1";
+			reg = <0x105e0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_ccore: clock-controller@105b0000 {
+			compatible = "samsung,exynos7-clock-ccore";
+			reg = <0x105b0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
+			clock-names = "fin_pll", "dout_aclk_ccore_133";
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
+				 <&clock_top0 CLK_SCLK_UART0>;
+			clock-names = "fin_pll", "dout_aclk_peric0_66",
+				      "sclk_uart0";
+		};
+
+		clock_peric1: clock-controller@14c80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+				 <&clock_top0 CLK_SCLK_UART1>,
+				 <&clock_top0 CLK_SCLK_UART2>,
+				 <&clock_top0 CLK_SCLK_UART3>;
+			clock-names = "fin_pll", "dout_aclk_peric1_66",
+				      "sclk_uart1", "sclk_uart2", "sclk_uart3";
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
+			clock-names = "fin_pll", "dout_aclk_peris_66";
+		};
+
+		clock_fsys0: clock-controller@10e90000 {
+			compatible = "samsung,exynos7-clock-fsys0";
+			reg = <0x10e90000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
+				 <&clock_top1 DOUT_SCLK_MMC2>;
+			clock-names = "fin_pll", "dout_aclk_fsys0_200",
+				      "dout_sclk_mmc2";
+		};
+
+		clock_fsys1: clock-controller@156e0000 {
+			compatible = "samsung,exynos7-clock-fsys1";
+			reg = <0x156e0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
+				 <&clock_top1 DOUT_SCLK_MMC0>,
+				 <&clock_top1 DOUT_SCLK_MMC1>;
+			clock-names = "fin_pll", "dout_aclk_fsys1_200",
+				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <0 440 0>;
+			clocks = <&clock_peric0 PCLK_UART0>,
+				 <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <0 456 0>;
+			clocks = <&clock_peric1 PCLK_UART1>,
+				 <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <0 457 0>;
+			clocks = <&clock_peric1 PCLK_UART2>,
+				 <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <0 458 0>;
+			clocks = <&clock_peric1 PCLK_UART3>,
+				 <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10580000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 16 0>;
+			};
+		};
+
+		pinctrl_bus0: pinctrl@13470000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x13470000 0x1000>;
+			interrupts = <0 383 0>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <0 473 0>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ce0000 0x1000>;
+			interrupts = <0 474 0>;
+		};
+
+		pinctrl_ff: pinctrl@14c90000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14c90000 0x1000>;
+			interrupts = <0 475 0>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <0 476 0>;
+		};
+
+		pinctrl_fsys0: pinctrl@10e60000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10e60000 0x1000>;
+			interrupts = <0 221 0>;
+		};
+
+		pinctrl_fsys1: pinctrl@15690000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <0 203 0>;
+		};
+
+		hsi2c_0: hsi2c@13640000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13640000 0x1000>;
+			interrupts = <0 441 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@13650000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13650000 0x1000>;
+			interrupts = <0 442 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <0 459 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <0 460 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: hsi2c@13660000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13660000 0x1000>;
+			interrupts = <0 443 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: hsi2c@13670000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13670000 0x1000>;
+			interrupts = <0 444 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: hsi2c@14e00000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e00000 0x1000>;
+			interrupts = <0 461 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: hsi2c@13e10000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 462 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: hsi2c@14e20000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e20000 0x1000>;
+			interrupts = <0 463 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: hsi2c@13680000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13680000 0x1000>;
+			interrupts = <0 445 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: hsi2c@13690000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13690000 0x1000>;
+			interrupts = <0 446 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: hsi2c@136a0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x136a0000 0x1000>;
+			interrupts = <0 447 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xff01>,
+				     <1 14 0xff01>,
+				     <1 11 0xff01>,
+				     <1 10 0xff01>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x105c0000 0x5000>;
+		};
+
+		rtc: rtc@10590000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10590000 0x100>;
+			interrupts = <0 355 0>, <0 356 0>;
+			clocks = <&clock_ccore PCLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&clock_peris PCLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		mmc_0: mmc@15740000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <0 201 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15740000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC0>,
+				 <&clock_top1 CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@15750000 {
+			compatible = "samsung,exynos7-dw-mshc";
+			interrupts = <0 202 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15750000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC1>,
+				 <&clock_top1 CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <0 216 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&clock_fsys0 ACLK_MMC2>,
+				 <&clock_top1 CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		adc: adc@13620000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x13620000 0x100>;
+			interrupts = <0 448 0>;
+			clocks = <&clock_peric0 PCLK_ADCIF>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		pwm: pwm@136c0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x136c0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric0 PCLK_PWM>;
+			clock-names = "timers";
+		};
+	};
+};
+
+#include "exynos7-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
new file mode 100644
index 000000000000..4f2de3e789ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+ 
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts
new file mode 100644
index 000000000000..82e2a6fccc64
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts
@@ -0,0 +1,65 @@
+/*
+ * Device Tree file for Freescale LS2085a software Simulator model
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2085a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2085a software Simulator model";
+	compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
new file mode 100644
index 000000000000..e281ceb338c3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
@@ -0,0 +1,163 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2085A family SoC.
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls2085a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+
+		/* We have 4 clusters having 2 Cortex-A57 cores each */
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x201>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x300>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x301>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
new file mode 100644
index 000000000000..3ce24622b231
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
new file mode 100644
index 000000000000..43d54017b779
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8173.dtsi"
+
+/ {
+	model = "mediatek,mt8173-evb";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen { };
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
new file mode 100644
index 000000000000..8554ec31dd9e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8173";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend   = <0x84000001>;
+		cpu_off	      = <0x84000002>;
+		cpu_on	      = <0x84000003>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt8173-sysirq",
+					"mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10220000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+
+};
+