arm64: dts: exynos: Make TM2 and TM2E independent from each other

Currently TM2E dts includes TM2 but there are some differences
between the two boards and TM2 has some properties that TM2E
doesn't have.

That's why it's important to keep the two dts files independent
and put all the commonalities in a tm2-common.dtsi file.

At the current status the only two differences between the two
dts files (besides the board name) are ldo31 and ldo38.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

3 files changed, 1128 insertions, 1098 deletions

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 000000000000..cc6701b3bce4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1118 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Common device tree source file for Samsung's TM2 and TM2E boards
+ * which are based on Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_cpif;
+		pinctrl3 = &pinctrl_ese;
+		pinctrl4 = &pinctrl_finger;
+		pinctrl5 = &pinctrl_fsys;
+		pinctrl6 = &pinctrl_imem;
+		pinctrl7 = &pinctrl_nfc;
+		pinctrl8 = &pinctrl_peric;
+		pinctrl9 = &pinctrl_touch;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		spi3 = &spi_3;
+		spi4 = &spi_4;
+		mshc0 = &mshc_0;
+		mshc2 = &mshc_2;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x0 0x20000000 0x0 0xc0000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+		};
+
+		volume-up-key {
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume-up key";
+			debounce-interval = <10>;
+		};
+
+		volume-down-key {
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume-down key";
+			debounce-interval = <10>;
+		};
+
+		homepage-key {
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "homepage key";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c_max98504: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+			 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max98504: max98504@31 {
+			compatible = "maxim,max98504";
+			reg = <0x31>;
+			maxim,rx-path = <1>;
+			maxim,tx-path = <1>;
+			maxim,tx-channel-mask = <3>;
+			maxim,tx-channel-source = <2>;
+		};
+	};
+
+	sound {
+		compatible = "samsung,tm2-audio";
+		audio-codec = <&wm5110>;
+		i2s-controller = <&i2s0>;
+		audio-amplifier = <&max98504>;
+		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+		model = "wm5110";
+		samsung,audio-routing =
+			/* Headphone */
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			/* Speaker */
+			"SPK", "SPKOUT",
+			"SPKOUT", "HPOUT2L",
+			"SPKOUT", "HPOUT2R",
+
+			/* Receiver */
+			"RCV", "HPOUT3L",
+			"RCV", "HPOUT3R";
+		status = "okay";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+
+	thermistor-ap {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor-charger {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 2>;
+	};
+};
+
+&bus_g2d_400 {
+	devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+	vdd-supply = <&buck4_reg>;
+	exynos,saturation-ratio = <10>;
+	status = "okay";
+};
+
+&bus_g2d_266 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_gscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_hevc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc0 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc1 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc2 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&cmu_aud {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+};
+
+&cmu_fsys {
+	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
+		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+			       <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+	assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+			  <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+				 <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+	assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mscl {
+	assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+			  <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+				 <&cmu_top CLK_SCLK_JPEG_MSCL>,
+				 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&dsi {
+	status = "okay";
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo7_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&te_irq>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				samsung,burst-clock-frequency = <512000000>;
+				samsung,esc-clock-frequency = <16000000>;
+			};
+		};
+	};
+};
+
+&hsi2c_0 {
+	status = "okay";
+	clock-frequency = <2500000>;
+
+	s2mps13-pmic@66 {
+		compatible = "samsung,s2mps13-pmic";
+		interrupt-parent = <&gpa0>;
+		interrupts = <7 IRQ_TYPE_NONE>;
+		reg = <0x66>;
+		samsung,s2mps11-wrstbi-ground;
+
+		s2mps13_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_0.9V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD1_E_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD10_DPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MIPI2L_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD18_MIPI2L_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD18_LLI_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD33_USB30_3.0V_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_INT_M_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_KFC_M_1.1V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_G3D_M_0.95V_AP";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDDQ_EFUSE";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_TFLASH_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "V_CODEC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDDA_1.8V_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_IO_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "CAM_SEN_CORE_1.05V_AP";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VT_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_AF_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VCC_3.0V_LCD_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VCC_1.8V_LCD_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VT_CAM_2.8V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "TSP_AVDD_3.3V_AP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/*
+				 * LDO31 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VTOUCH_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VTOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VCC_1.8V_MHL_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2100000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "OIS_VM_2.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo36_reg: LDO36 {
+				regulator-name = "VSIL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo37_reg: LDO37 {
+				regulator-name = "VF_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/*
+				 * LDO38 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo39_reg: LDO39 {
+				regulator-name = "V_HRM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo40_reg: LDO40 {
+				regulator-name = "V_HRM_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_EGL_1.0V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_KFC_1.0V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_INT_0.95V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_G3D_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_MEM1_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VDD_LLDO_1.35V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_MLDO_2.0V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_mem2";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	max77843@66 {
+		compatible = "maxim,max77843";
+		interrupt-parent = <&gpa1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x66>;
+
+		muic: max77843-muic {
+			compatible = "maxim,max77843-muic";
+		};
+
+		regulators {
+			compatible = "maxim,max77843-regulator";
+			safeout1_reg: SAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			safeout2_reg: SAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <3150000>;
+			};
+		};
+
+		haptic: max77843-haptic {
+			compatible = "maxim,max77843-haptic";
+			haptic-supply = <&ldo38_reg>;
+			pwms = <&pwm 0 33670 0>;
+			pwm-names = "haptic";
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mshc_0 {
+	status = "okay";
+	num-slots = <1>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 3>;
+	samsung,read-strobe-delay = <90>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+			&sd0_bus8 &sd0_rdqs>;
+	bus-width = <8>;
+	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+	assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	disable-wp;
+	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+&ppmu_d0_general {
+	status = "okay";
+	events {
+		ppmu_event0_d0_general: ppmu-event0-d0-general {
+			event-name = "ppmu-event0-d0-general";
+		};
+	};
+};
+
+&ppmu_d1_general {
+	status = "okay";
+	events {
+		ppmu_event0_d1_general: ppmu-event0-d1-general {
+		       event-name = "ppmu-event0-d1-general";
+	       };
+       };
+};
+
+&pinctrl_alive {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_alive>;
+
+	initial_alive: initial-state {
+		PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpa0-1, NONE, FAST_SR1);
+		PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpa0-3, NONE, FAST_SR1);
+		PIN(INPUT, gpa0-4, NONE, FAST_SR1);
+		PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpa0-6, NONE, FAST_SR1);
+		PIN(INPUT, gpa0-7, NONE, FAST_SR1);
+
+		PIN(INPUT, gpa1-0, UP, FAST_SR1);
+		PIN(INPUT, gpa1-1, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-2, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
+		PIN(INPUT, gpa1-5, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-6, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-7, NONE, FAST_SR1);
+
+		PIN(INPUT, gpa2-0, NONE, FAST_SR1);
+		PIN(INPUT, gpa2-1, NONE, FAST_SR1);
+		PIN(INPUT, gpa2-2, NONE, FAST_SR1);
+		PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpa2-4, NONE, FAST_SR1);
+		PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpa2-7, NONE, FAST_SR1);
+
+		PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpa3-2, NONE, FAST_SR1);
+		PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpa3-4, NONE, FAST_SR1);
+		PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpf1-0, NONE, FAST_SR1);
+		PIN(INPUT, gpf1-1, NONE, FAST_SR1);
+		PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpf1-4, UP, FAST_SR1);
+		PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
+		PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpf3-2, NONE, FAST_SR1);
+		PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
+		PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
+		PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
+	};
+
+	te_irq: te_irq {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <0xf>;
+	};
+};
+
+&pinctrl_cpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_cpif>;
+
+	initial_cpif: initial-state {
+		PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_ese {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_ese>;
+
+	initial_ese: initial-state {
+		PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_fsys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_fsys>;
+
+	initial_fsys: initial-state {
+		PIN(INPUT, gpr3-0, NONE, FAST_SR1);
+		PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpr3-7, NONE, FAST_SR1);
+	};
+};
+
+&pinctrl_imem {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_imem>;
+
+	initial_imem: initial-state {
+		PIN(INPUT, gpf0-0, UP, FAST_SR1);
+		PIN(INPUT, gpf0-1, UP, FAST_SR1);
+		PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpf0-3, UP, FAST_SR1);
+		PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
+		PIN(INPUT, gpf0-5, NONE, FAST_SR1);
+		PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
+		PIN(INPUT, gpf0-7, UP, FAST_SR1);
+	};
+};
+
+&pinctrl_nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_nfc>;
+
+	initial_nfc: initial-state {
+		PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_peric {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_peric>;
+
+	initial_peric: initial-state {
+		PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpv7-2, NONE, FAST_SR1);
+		PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
+		PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpc3-4, NONE, FAST_SR1);
+		PIN(INPUT, gpc3-5, NONE, FAST_SR1);
+		PIN(INPUT, gpc3-6, NONE, FAST_SR1);
+		PIN(INPUT, gpc3-7, NONE, FAST_SR1);
+
+		PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
+		PIN(2, gpg0-1, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpd4-0, NONE, FAST_SR1);
+		PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpd8-1, UP, FAST_SR1);
+
+		PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
+		PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
+		PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
+
+		PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
+		PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
+		PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
+		PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_touch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_touch>;
+
+	initial_touch: initial-state {
+		PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mic {
+	status = "okay";
+
+	i80-if-timings {
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&spi_1 {
+	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm5110: wm5110-codec@0 {
+		compatible = "wlf,wm5110";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		clocks = <&pmu_system_controller 0>,
+			<&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "mclk1", "mclk2";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		wlf,micd-detect-debounce = <300>;
+		wlf,micd-bias-start-time = <0x1>;
+		wlf,micd-rate = <0x7>;
+		wlf,micd-dbtime = <0x1>;
+		wlf,micd-force-micbias;
+		wlf,micd-configs = <0x0 1 0>;
+		wlf,hpdet-channel = <1>;
+		wlf,gpsw = <0x1>;
+		wlf,inmode = <2 0 2 0>;
+
+		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+		/* core supplies */
+		AVDD-supply = <&ldo18_reg>;
+		DBVDD1-supply = <&ldo18_reg>;
+		CPVDD-supply = <&ldo18_reg>;
+		DBVDD2-supply = <&ldo18_reg>;
+		DBVDD3-supply = <&ldo18_reg>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&timer {
+	clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_apollo {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_g3d {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&usbdrd30 {
+	vdd33-supply = <&ldo10_reg>;
+	vdd10-supply = <&ldo6_reg>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+	vbus-supply = <&safeout1_reg>;
+	status = "okay";
+};
+
+&xxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 640e4b9910ae..2449266b268f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -11,1109 +11,21 @@
  * published by the Free Software Foundation.
  */
 
-/dts-v1/;
-#include "exynos5433.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5433-tm2-common.dtsi"
 
 / {
 	model = "Samsung TM2 board";
 	compatible = "samsung,tm2", "samsung,exynos5433";
-
-	aliases {
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		gsc2 = &gsc_2;
-		pinctrl0 = &pinctrl_alive;
-		pinctrl1 = &pinctrl_aud;
-		pinctrl2 = &pinctrl_cpif;
-		pinctrl3 = &pinctrl_ese;
-		pinctrl4 = &pinctrl_finger;
-		pinctrl5 = &pinctrl_fsys;
-		pinctrl6 = &pinctrl_imem;
-		pinctrl7 = &pinctrl_nfc;
-		pinctrl8 = &pinctrl_peric;
-		pinctrl9 = &pinctrl_touch;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		spi3 = &spi_3;
-		spi4 = &spi_4;
-		mshc0 = &mshc_0;
-		mshc2 = &mshc_2;
-	};
-
-	chosen {
-		stdout-path = &serial_1;
-	};
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x0 0x20000000 0x0 0xc0000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-		};
-
-		volume-up-key {
-			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			label = "volume-up key";
-			debounce-interval = <10>;
-		};
-
-		volume-down-key {
-			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			label = "volume-down key";
-			debounce-interval = <10>;
-		};
-
-		homepage-key {
-			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "homepage key";
-			debounce-interval = <10>;
-		};
-	};
-
-	i2c_max98504: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
-			 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		max98504: max98504@31 {
-			compatible = "maxim,max98504";
-			reg = <0x31>;
-			maxim,rx-path = <1>;
-			maxim,tx-path = <1>;
-			maxim,tx-channel-mask = <3>;
-			maxim,tx-channel-source = <2>;
-		};
-	};
-
-	sound {
-		compatible = "samsung,tm2-audio";
-		audio-codec = <&wm5110>;
-		i2s-controller = <&i2s0>;
-		audio-amplifier = <&max98504>;
-		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
-		model = "wm5110";
-		samsung,audio-routing =
-			/* Headphone */
-			"HP", "HPOUT1L",
-			"HP", "HPOUT1R",
-
-			/* Speaker */
-			"SPK", "SPKOUT",
-			"SPKOUT", "HPOUT2L",
-			"SPKOUT", "HPOUT2R",
-
-			/* Receiver */
-			"RCV", "HPOUT3L",
-			"RCV", "HPOUT3R";
-		status = "okay";
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-
-	thermistor-ap {
-		compatible = "murata,ncp03wf104";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 0>;
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp03wf104";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 1>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	thermistor-charger {
-		compatible = "murata,ncp03wf104";
-		pullup-uv = <1800000>;
-		pullup-ohm = <100000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 2>;
-	};
-};
-
-&bus_g2d_400 {
-	devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
-	vdd-supply = <&buck4_reg>;
-	exynos,saturation-ratio = <10>;
-	status = "okay";
-};
-
-&bus_g2d_266 {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_gscl {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_hevc {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_jpeg {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_mscl {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_noc0 {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_noc1 {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&bus_noc2 {
-	devfreq = <&bus_g2d_400>;
-	status = "okay";
-};
-
-&cmu_aud {
-	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
-	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
-};
-
-&cmu_fsys {
-	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
-		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
-		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
-		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
-		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
-		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
-		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
-		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
-		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
-		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
-	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
-		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
-		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
-		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
-		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
-		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
-		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
-			       <66700000>, <66700000>;
-};
-
-&cmu_gscl {
-	assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
-			  <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
-	assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
-				 <&cmu_top CLK_ACLK_GSCL_333>;
-};
-
-&cmu_mfc {
-	assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
-	assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
-};
-
-&cmu_mscl {
-	assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
-			  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
-			  <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
-			  <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
-	assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
-				 <&cmu_top CLK_SCLK_JPEG_MSCL>,
-				 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
-				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
-};
-
-&cpu0 {
-	cpu-supply = <&buck3_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&decon {
-	status = "okay";
-
-	i80-if-timings {
-	};
-};
-
-&dsi {
-	status = "okay";
-	vddcore-supply = <&ldo6_reg>;
-	vddio-supply = <&ldo7_reg>;
-	samsung,pll-clock-frequency = <24000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&te_irq>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				samsung,burst-clock-frequency = <512000000>;
-				samsung,esc-clock-frequency = <16000000>;
-			};
-		};
-	};
-};
-
-&hsi2c_0 {
-	status = "okay";
-	clock-frequency = <2500000>;
-
-	s2mps13-pmic@66 {
-		compatible = "samsung,s2mps13-pmic";
-		interrupt-parent = <&gpa0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
-		reg = <0x66>;
-		samsung,s2mps11-wrstbi-ground;
-
-		s2mps13_osc: clocks {
-			compatible = "samsung,s2mps13-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps13_ap", "s2mps13_cp",
-				"s2mps13_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_0.9V_AP";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDDQ_MMC2_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD1_E_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
-				regulator-min-microvolt = <1300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD10_DPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD10_MIPI2L_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD18_MIPI2L_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD18_LLI_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD33_USB30_3.0V_AP";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_INT_M_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_KFC_M_1.1V_AP";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDD_G3D_M_0.95V_AP";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDDQ_EFUSE";
-				regulator-min-microvolt = <1400000>;
-				regulator-max-microvolt = <3400000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "V_TFLASH_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "V_CODEC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VDDA_1.8V_COMP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VCC_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "CAM_IO_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "CAM_SEN_CORE_1.05V_AP";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1050000>;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VT_CAM_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "UNUSED_LDO25";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "CAM_AF_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "VCC_3.0V_LCD_AP";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "VCC_1.8V_LCD_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "VT_CAM_2.8V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo30_reg: LDO30 {
-				regulator-name = "TSP_AVDD_3.3V_AP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo31_reg: LDO31 {
-				regulator-name = "TSP_VDD_1.85V_AP";
-				regulator-min-microvolt = <1850000>;
-				regulator-max-microvolt = <1850000>;
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "VTOUCH_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "VTOUCH_LED_3.3V";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-			};
-
-			ldo34_reg: LDO34 {
-				regulator-name = "VCC_1.8V_MHL_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <2100000>;
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "OIS_VM_2.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo36_reg: LDO36 {
-				regulator-name = "VSIL_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo37_reg: LDO37 {
-				regulator-name = "VF_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo38_reg: LDO38 {
-				regulator-name = "VCC_3.0V_MOTOR_AP";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo39_reg: LDO39 {
-				regulator-name = "V_HRM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo40_reg: LDO40 {
-				regulator-name = "V_HRM_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF_0.9V_AP";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_EGL_1.0V_AP";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_KFC_1.0V_AP";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_INT_0.95V_AP";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VDD_G3D_0.9V_AP";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VDD_MEM1_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VDD_LLDO_1.35V_AP";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VDD_MLDO_2.0V_AP";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_mem2";
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&hsi2c_8 {
-	status = "okay";
-
-	max77843@66 {
-		compatible = "maxim,max77843";
-		interrupt-parent = <&gpa1>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reg = <0x66>;
-
-		muic: max77843-muic {
-			compatible = "maxim,max77843-muic";
-		};
-
-		regulators {
-			compatible = "maxim,max77843-regulator";
-			safeout1_reg: SAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <4950000>;
-			};
-
-			safeout2_reg: SAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <4950000>;
-			};
-
-			charger_reg: CHARGER {
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <100000>;
-				regulator-max-microamp = <3150000>;
-			};
-		};
-
-		haptic: max77843-haptic {
-			compatible = "maxim,max77843-haptic";
-			haptic-supply = <&ldo38_reg>;
-			pwms = <&pwm 0 33670 0>;
-			pwm-names = "haptic";
-		};
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mshc_0 {
-	status = "okay";
-	num-slots = <1>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	cap-mmc-highspeed;
-	non-removable;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 3>;
-	samsung,read-strobe-delay = <90>;
-	fifo-depth = <0x80>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
-			&sd0_bus8 &sd0_rdqs>;
-	bus-width = <8>;
-	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
-	assigned-clock-rates = <800000000>;
-};
-
-&mshc_2 {
-	status = "okay";
-	num-slots = <1>;
-	cap-sd-highspeed;
-	disable-wp;
-	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	fifo-depth = <0x80>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-};
-
-&ppmu_d0_general {
-	status = "okay";
-	events {
-		ppmu_event0_d0_general: ppmu-event0-d0-general {
-			event-name = "ppmu-event0-d0-general";
-		};
-	};
-};
-
-&ppmu_d1_general {
-	status = "okay";
-	events {
-		ppmu_event0_d1_general: ppmu-event0-d1-general {
-		       event-name = "ppmu-event0-d1-general";
-	       };
-       };
-};
-
-&pinctrl_alive {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_alive>;
-
-	initial_alive: initial-state {
-		PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-1, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-3, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-6, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa1-0, UP, FAST_SR1);
-		PIN(INPUT, gpa1-1, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpa1-5, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-6, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa2-0, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-1, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf1-0, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-1, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf1-4, UP, FAST_SR1);
-		PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf3-2, NONE, FAST_SR1);
-		PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
-		PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
-		PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
-	};
-
-	te_irq: te_irq {
-		samsung,pins = "gpf1-3";
-		samsung,pin-function = <0xf>;
-	};
-};
-
-&pinctrl_cpif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_cpif>;
-
-	initial_cpif: initial-state {
-		PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
-	};
-};
-
-&pinctrl_ese {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_ese>;
-
-	initial_ese: initial-state {
-		PIN(INPUT, gpj2-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
-	};
-};
-
-&pinctrl_fsys {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_fsys>;
-
-	initial_fsys: initial-state {
-		PIN(INPUT, gpr3-0, NONE, FAST_SR1);
-		PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-7, NONE, FAST_SR1);
-	};
-};
-
-&pinctrl_imem {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_imem>;
-
-	initial_imem: initial-state {
-		PIN(INPUT, gpf0-0, UP, FAST_SR1);
-		PIN(INPUT, gpf0-1, UP, FAST_SR1);
-		PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-3, UP, FAST_SR1);
-		PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-5, NONE, FAST_SR1);
-		PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-7, UP, FAST_SR1);
-	};
-};
-
-&pinctrl_nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_nfc>;
-
-	initial_nfc: initial-state {
-		PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
-	};
-};
-
-&pinctrl_peric {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_peric>;
-
-	initial_peric: initial-state {
-		PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-2, NONE, FAST_SR1);
-		PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpc3-4, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-5, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-6, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-7, NONE, FAST_SR1);
-
-		PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
-		PIN(2, gpg0-1, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpd4-0, NONE, FAST_SR1);
-		PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpd8-1, UP, FAST_SR1);
-
-		PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
-	};
-};
-
-&pinctrl_touch {
-	pinctrl-names = "default";
-	pinctrl-0 = <&initial_touch>;
-
-	initial_touch: initial-state {
-		PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mic {
-	status = "okay";
-
-	i80-if-timings {
-	};
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents = <&xxti>;
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&spi_1 {
-	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	wm5110: wm5110-codec@0 {
-		compatible = "wlf,wm5110";
-		reg = <0x0>;
-		spi-max-frequency = <20000000>;
-		interrupt-parent = <&gpa0>;
-		interrupts = <4 IRQ_TYPE_NONE>;
-		clocks = <&pmu_system_controller 0>,
-			<&s2mps13_osc S2MPS11_CLK_BT>;
-		clock-names = "mclk1", "mclk2";
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		wlf,micd-detect-debounce = <300>;
-		wlf,micd-bias-start-time = <0x1>;
-		wlf,micd-rate = <0x7>;
-		wlf,micd-dbtime = <0x1>;
-		wlf,micd-force-micbias;
-		wlf,micd-configs = <0x0 1 0>;
-		wlf,hpdet-channel = <1>;
-		wlf,gpsw = <0x1>;
-		wlf,inmode = <2 0 2 0>;
-
-		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
-		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
-
-		/* core supplies */
-		AVDD-supply = <&ldo18_reg>;
-		DBVDD1-supply = <&ldo18_reg>;
-		CPVDD-supply = <&ldo18_reg>;
-		DBVDD2-supply = <&ldo18_reg>;
-		DBVDD3-supply = <&ldo18_reg>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-	};
-};
-
-&timer {
-	clock-frequency = <24000000>;
-};
-
-&tmu_atlas0 {
-	vtmu-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&tmu_apollo {
-	vtmu-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&tmu_g3d {
-	vtmu-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&usbdrd30 {
-	vdd33-supply = <&ldo10_reg>;
-	vdd10-supply = <&ldo6_reg>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "otg";
 };
 
-&usbdrd30_phy {
-	vbus-supply = <&safeout1_reg>;
-	status = "okay";
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.85V_AP";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <1850000>;
 };
 
-&xxti {
-	clock-frequency = <24000000>;
+&ldo38_reg {
+	regulator-name = "VCC_3.0V_MOTOR_AP";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 854c583092d5..2fbf3a860316 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "exynos5433-tm2.dts"
+#include "exynos5433-tm2-common.dtsi"
 
 / {
 	model = "Samsung TM2E board";