Merge branch 'samsung/cleanup' into next/drivers

Dependency for the samsung/drivers branch

Conflicts:
	arch/arm/mach-exynos/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

10 files changed, 193 insertions, 80 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 313eb26cfa62..160eea15a6ef 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -226,11 +226,23 @@ config SAMSUNG_DEV_IDE
 	help
 	  Compile in platform device definitions for IDE
 
-config S3C64XX_DEV_SPI
+config S3C64XX_DEV_SPI0
 	bool
 	help
 	  Compile in platform device definitions for S3C64XX's type
-	  SPI controllers.
+	  SPI controller 0
+
+config S3C64XX_DEV_SPI1
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 1
+
+config S3C64XX_DEV_SPI2
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controller 2
 
 config SAMSUNG_DEV_TS
 	bool
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 4ca8b571f971..de0d88d6a0f1 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -61,6 +61,7 @@
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
+#include <plat/s3c64xx-spi.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 
@@ -1461,3 +1462,129 @@ struct platform_device s3c_device_wdt = {
 	.resource	= s3c_wdt_resource,
 };
 #endif /* CONFIG_S3C_DEV_WDT */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
+	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
+	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		= "s3c64xx-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	= s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs)
+{
+	if (!pd) {
+		pr_err("%s:Need to pass platform data\n", __func__);
+		return;
+	}
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0) {
+		pr_err("%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	if (!pd->cfg_gpio)
+		pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
+
+	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI0 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
+	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
+	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		= "s3c64xx-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	= s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs)
+{
+	if (!pd) {
+		pr_err("%s:Need to pass platform data\n", __func__);
+		return;
+	}
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0) {
+		pr_err("%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	if (!pd->cfg_gpio)
+		pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
+
+	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI1 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+static struct resource s3c64xx_spi2_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
+	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
+	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
+	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
+};
+
+struct platform_device s3c64xx_device_spi2 = {
+	.name		= "s3c64xx-spi",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c64xx_spi2_resource),
+	.resource	= s3c64xx_spi2_resource,
+	.dev = {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs)
+{
+	if (!pd) {
+		pr_err("%s:Need to pass platform data\n", __func__);
+		return;
+	}
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0) {
+		pr_err("%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	if (!pd->cfg_gpio)
+		pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
+
+	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 93a994a5dd8f..2cded872f22b 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,23 +18,24 @@
 
 #include <mach/dma.h>
 
-static inline bool pl330_filter(struct dma_chan *chan, void *param)
-{
-	struct dma_pl330_peri *peri = chan->private;
-	return peri->peri_id == (unsigned)param;
-}
-
 static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				struct samsung_dma_info *info)
 {
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 	struct dma_slave_config slave_config;
+	void *filter_param;
 
 	dma_cap_zero(mask);
 	dma_cap_set(info->cap, mask);
 
-	chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+	/*
+	 * If a dma channel property of a device node from device tree is
+	 * specified, use that as the fliter parameter.
+	 */
+	filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
+				(void *)dma_ch;
+	chan = dma_request_channel(mask, pl330_filter, filter_param);
 
 	if (info->direction == DMA_FROM_DEVICE) {
 		memset(&slave_config, 0, sizeof(struct dma_slave_config));
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index a2ff27e3ec30..4214ea0ff8fe 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -39,6 +39,7 @@ extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 extern struct platform_device s3c64xx_device_spi0;
 extern struct platform_device s3c64xx_device_spi1;
+extern struct platform_device s3c64xx_device_spi2;
 
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_cfcon;
@@ -98,8 +99,6 @@ extern struct platform_device s5p6450_device_iis1;
 extern struct platform_device s5p6450_device_iis2;
 extern struct platform_device s5p6450_device_pcm0;
 
-extern struct platform_device s5p64x0_device_spi0;
-extern struct platform_device s5p64x0_device_spi1;
 
 extern struct platform_device s5pc100_device_ac97;
 extern struct platform_device s5pc100_device_iis0;
@@ -108,9 +107,6 @@ extern struct platform_device s5pc100_device_iis2;
 extern struct platform_device s5pc100_device_pcm0;
 extern struct platform_device s5pc100_device_pcm1;
 extern struct platform_device s5pc100_device_spdif;
-extern struct platform_device s5pc100_device_spi0;
-extern struct platform_device s5pc100_device_spi1;
-extern struct platform_device s5pc100_device_spi2;
 
 extern struct platform_device s5pv210_device_ac97;
 extern struct platform_device s5pv210_device_iis0;
@@ -120,8 +116,6 @@ extern struct platform_device s5pv210_device_pcm0;
 extern struct platform_device s5pv210_device_pcm1;
 extern struct platform_device s5pv210_device_pcm2;
 extern struct platform_device s5pv210_device_spdif;
-extern struct platform_device s5pv210_device_spi0;
-extern struct platform_device s5pv210_device_spi1;
 
 extern struct platform_device exynos4_device_ac97;
 extern struct platform_device exynos4_device_ahci;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 4c1a363526cf..22eafc310bd7 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -31,6 +31,7 @@ struct samsung_dma_info {
 	enum dma_slave_buswidth width;
 	dma_addr_t fifo;
 	struct s3c2410_dma_client *client;
+	struct property *dt_dmach_prop;
 };
 
 struct samsung_dma_ops {
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 2e55e5958674..c5eaad529de5 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -21,7 +21,8 @@
  * use these just as IDs.
  */
 enum dma_ch {
-	DMACH_UART0_RX,
+	DMACH_DT_PROP = -1,
+	DMACH_UART0_RX = 0,
 	DMACH_UART0_TX,
 	DMACH_UART1_RX,
 	DMACH_UART1_TX,
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index 08d1a7ef97b7..df46b776976a 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,13 +44,14 @@
 #define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
 #define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
 
-#define S5P_TIMER_IRQ(x)	(11 + (x))
+#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
 
 #define IRQ_TIMER0		S5P_TIMER_IRQ(0)
 #define IRQ_TIMER1		S5P_TIMER_IRQ(1)
 #define IRQ_TIMER2		S5P_TIMER_IRQ(2)
 #define IRQ_TIMER3		S5P_TIMER_IRQ(3)
 #define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+#define IRQ_TIMER_COUNT		(5)
 
 #define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
 					: ((x) - 16 + S5P_EINT_BASE2))
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 720734847027..29c26a818842 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -71,6 +71,7 @@
 #define S3C2410_LCON_IRM          (1<<6)
 
 #define S3C2440_UCON_CLKMASK	  (3<<10)
+#define S3C2440_UCON_CLKSHIFT	  (10)
 #define S3C2440_UCON_PCLK	  (0<<10)
 #define S3C2440_UCON_UCLK	  (1<<10)
 #define S3C2440_UCON_PCLK2	  (2<<10)
@@ -78,6 +79,7 @@
 #define S3C2443_UCON_EPLL	  (3<<10)
 
 #define S3C6400_UCON_CLKMASK	(3<<10)
+#define S3C6400_UCON_CLKSHIFT	(10)
 #define S3C6400_UCON_PCLK	(0<<10)
 #define S3C6400_UCON_PCLK2	(2<<10)
 #define S3C6400_UCON_UCLK0	(1<<10)
@@ -90,11 +92,14 @@
 #define S3C2440_UCON_DIVSHIFT	  (12)
 
 #define S3C2412_UCON_CLKMASK	(3<<10)
+#define S3C2412_UCON_CLKSHIFT	(10)
 #define S3C2412_UCON_UCLK	(1<<10)
 #define S3C2412_UCON_USYSCLK	(3<<10)
 #define S3C2412_UCON_PCLK	(0<<10)
 #define S3C2412_UCON_PCLK2	(2<<10)
 
+#define S3C2410_UCON_CLKMASK	(1 << 10)
+#define S3C2410_UCON_CLKSHIFT	(10)
 #define S3C2410_UCON_UCLK	  (1<<10)
 #define S3C2410_UCON_SBREAK	  (1<<4)
 
@@ -193,6 +198,7 @@
 
 /* Following are specific to S5PV210 */
 #define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_CLKSHIFT	(10)
 #define S5PV210_UCON_PCLK	(0<<10)
 #define S5PV210_UCON_UCLK	(1<<10)
 
@@ -221,29 +227,24 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
-#define NO_NEED_CHECK_CLKSRC	1
+#define S3C2410_UCON_CLKSEL0	(1 << 0)
+#define S3C2410_UCON_CLKSEL1	(1 << 1)
+#define S3C2410_UCON_CLKSEL2	(1 << 2)
+#define S3C2410_UCON_CLKSEL3	(1 << 3)
 
-#ifndef __ASSEMBLY__
+/* Default values for s5pv210 UCON and UFCON uart registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
 
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
 
-struct s3c24xx_uart_clksrc {
-	const char	*name;
-	unsigned int	 divisor;
-	unsigned int	 min_baud;
-	unsigned int	 max_baud;
-};
+#ifndef __ASSEMBLY__
 
 /* configuration structure for per-machine configurations for the
  * serial port
@@ -257,15 +258,13 @@ struct s3c2410_uartcfg {
 	unsigned char	   unused;
 	unsigned short	   flags;
 	upf_t		   uart_flags;	 /* default uart flags */
+	unsigned int	   clk_sel;
 
 	unsigned int	   has_fracval;
 
 	unsigned long	   ucon;	 /* value of ucon for port */
 	unsigned long	   ulcon;	 /* value of ulcon for port */
 	unsigned long	   ufcon;	 /* value of ufcon for port */
-
-	struct s3c24xx_uart_clksrc *clocks;
-	unsigned int		    clocks_size;
 };
 
 /* s3c24xx_uart_devs
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index 4c16fa3621bb..aea68b60ef98 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -31,7 +31,6 @@ struct s3c64xx_spi_csinfo {
 /**
  * struct s3c64xx_spi_info - SPI Controller defining structure
  * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @src_clk_name: Platform name of the corresponding clock.
  * @clk_from_cmu: If the SPI clock/prescalar control block is present
  *     by the platform's clock-management-unit and not in SPI controller.
  * @num_cs: Number of CS this controller emulates.
@@ -43,7 +42,6 @@ struct s3c64xx_spi_csinfo {
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
-	char *src_clk_name;
 	bool clk_from_cmu;
 
 	int num_cs;
@@ -58,18 +56,28 @@ struct s3c64xx_spi_info {
 };
 
 /**
- * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
  *				initialization code.
- * @cntrlr: SPI controller number the configuration is for.
+ * @pd: SPI platform data to set.
  * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
  * @num_cs: Number of elements in the 'cs' array.
  *
  * Call this from machine init code for each SPI Controller that
  * has some chips attached to it.
  */
-extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs);
+extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs);
+extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+				      int src_clk_nr, int num_cs);
 
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
 #endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index e7b3c752e919..dcff7dd1ae8a 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -66,8 +66,6 @@ struct s3c_sdhci_platdata {
 	enum cd_types	cd_type;
 	enum clk_types	clk_type;
 
-	char		**clocks;	/* set of clock sources */
-
 	int		ext_cd_gpio;
 	bool		ext_cd_gpio_invert;
 	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
@@ -129,12 +127,9 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 /* S3C2416 SDHCI setup */
 
 #ifdef CONFIG_S3C2416_SETUP_SDHCI
-extern char *s3c2416_hsmmc_clksrcs[4];
-
 static inline void s3c2416_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
 #endif /* CONFIG_S3C_DEV_HSMMC */
 }
@@ -142,7 +137,6 @@ static inline void s3c2416_default_sdhci0(void)
 static inline void s3c2416_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 }
@@ -155,12 +149,9 @@ static inline void s3c2416_default_sdhci1(void) { }
 /* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
-extern char *s3c64xx_hsmmc_clksrcs[4];
-
 static inline void s3c6400_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 #endif
 }
@@ -168,7 +159,6 @@ static inline void s3c6400_default_sdhci0(void)
 static inline void s3c6400_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 #endif
 }
@@ -176,7 +166,6 @@ static inline void s3c6400_default_sdhci1(void)
 static inline void s3c6400_default_sdhci2(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 #endif
 }
@@ -184,7 +173,6 @@ static inline void s3c6400_default_sdhci2(void)
 static inline void s3c6410_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 #endif
 }
@@ -192,7 +180,6 @@ static inline void s3c6410_default_sdhci0(void)
 static inline void s3c6410_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 #endif
 }
@@ -200,7 +187,6 @@ static inline void s3c6410_default_sdhci1(void)
 static inline void s3c6410_default_sdhci2(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 #endif
 }
@@ -218,12 +204,9 @@ static inline void s3c6400_default_sdhci2(void) { }
 /* S5PC100 SDHCI setup */
 
 #ifdef CONFIG_S5PC100_SETUP_SDHCI
-extern char *s5pc100_hsmmc_clksrcs[4];
-
 static inline void s5pc100_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
 #endif
 }
@@ -231,7 +214,6 @@ static inline void s5pc100_default_sdhci0(void)
 static inline void s5pc100_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
 #endif
 }
@@ -239,7 +221,6 @@ static inline void s5pc100_default_sdhci1(void)
 static inline void s5pc100_default_sdhci2(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
 #endif
 }
@@ -254,12 +235,9 @@ static inline void s5pc100_default_sdhci2(void) { }
 /* S5PV210 SDHCI setup */
 
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
-extern char *s5pv210_hsmmc_clksrcs[4];
-
 static inline void s5pv210_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
 #endif
 }
@@ -267,7 +245,6 @@ static inline void s5pv210_default_sdhci0(void)
 static inline void s5pv210_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
 #endif
 }
@@ -275,7 +252,6 @@ static inline void s5pv210_default_sdhci1(void)
 static inline void s5pv210_default_sdhci2(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
 #endif
 }
@@ -283,7 +259,6 @@ static inline void s5pv210_default_sdhci2(void)
 static inline void s5pv210_default_sdhci3(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
 #endif
 }
@@ -298,12 +273,9 @@ static inline void s5pv210_default_sdhci3(void) { }
 
 /* EXYNOS4 SDHCI setup */
 #ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-extern char *exynos4_hsmmc_clksrcs[4];
-
 static inline void exynos4_default_sdhci0(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
 #endif
 }
@@ -311,7 +283,6 @@ static inline void exynos4_default_sdhci0(void)
 static inline void exynos4_default_sdhci1(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
 #endif
 }
@@ -319,7 +290,6 @@ static inline void exynos4_default_sdhci1(void)
 static inline void exynos4_default_sdhci2(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
 #endif
 }
@@ -327,7 +297,6 @@ static inline void exynos4_default_sdhci2(void)
 static inline void exynos4_default_sdhci3(void)
 {
 #ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
 	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
 #endif
 }