Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...

9 files changed, 266 insertions, 646 deletions

diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 706dc5727bbe..82226a5d60ef 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,19 +4,13 @@ menu "Nomadik boards"
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select CLKSRC_NOMADIK_MTU
 	select NOMADIK_8815
+	select I2C
+	select I2C_ALGOBIT
 
 endmenu
 
 config NOMADIK_8815
 	bool
 
-config I2C_BITBANG_8815NHK
-	tristate "Driver for bit-bang busses found on the 8815 NHK"
-	depends on I2C && MACH_NOMADIK_8815NHK
-	depends on PINCTRL_NOMADIK
-	default y
-	select I2C_ALGOBIT
-
 endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a42c9a33d3bf..1071c3b04d1a 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -9,9 +9,3 @@
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
-
-# Nomadik extra devices
-obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
deleted file mode 100644
index aaed48d94374..000000000000
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- *  linux/arch/arm/mach-nomadik/board-8815nhk.c
- *
- *  Copyright (C) STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- *  NHK15 board specifc driver definition
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/fsmc.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-#include <mach/irqs.h>
-
-#include "cpu-8815.h"
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-#define ALE_OFF 0x1000000
-#define CLE_OFF 0x800000
-
-/* These addresses span 16MB, so use three individual pages */
-static struct resource nhk8815_nand_resources[] = {
-	{
-		.name = "nand_data",
-		.start = 0x40000000,
-		.end = 0x40000000 + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.name = "nand_addr",
-		.start = 0x40000000 + ALE_OFF,
-		.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.name = "nand_cmd",
-		.start = 0x40000000 + CLE_OFF,
-		.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.name  = "fsmc_regs",
-		.start = NOMADIK_FSMC_BASE,
-		.end   = NOMADIK_FSMC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-/*
- * These partitions are the same as those used in the 2.6.20 release
- * shipped by the vendor; the first two partitions are mandated
- * by the boot ROM, and the bootloader area is somehow oversized...
- */
-static struct mtd_partition nhk8815_partitions[] = {
-	{
-		.name	= "X-Loader(NAND)",
-		.offset = 0,
-		.size	= SZ_256K,
-	}, {
-		.name	= "MemInit(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_256K,
-	}, {
-		.name	= "BootLoader(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_2M,
-	}, {
-		.name	= "Kernel zImage(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 3 * SZ_1M,
-	}, {
-		.name	= "Root Filesystem(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 22 * SZ_1M,
-	}, {
-		.name	= "User Filesystem(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct fsmc_nand_timings nhk8815_nand_timings = {
-	.thiz	= 0,
-	.thold	= 0x10,
-	.twait	= 0x0A,
-	.tset	= 0,
-};
-
-static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
-	.nand_timings = &nhk8815_nand_timings,
-	.partitions = nhk8815_partitions,
-	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
-	.width = FSMC_NAND_BW8,
-};
-
-static struct platform_device nhk8815_nand_device = {
-	.name = "fsmc-nand",
-	.id = -1,
-	.resource = nhk8815_nand_resources,
-	.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
-	.dev = {
-		.platform_data = &nhk8815_nand_platform_data,
-	},
-};
-
-/* These are the partitions for the OneNand device, different from above */
-static struct mtd_partition nhk8815_onenand_partitions[] = {
-	{
-		.name	= "X-Loader(OneNAND)",
-		.offset = 0,
-		.size	= SZ_256K,
-	}, {
-		.name	= "MemInit(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_256K,
-	}, {
-		.name	= "BootLoader(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_2M-SZ_256K,
-	}, {
-		.name	= "SysImage(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 4 * SZ_1M,
-	}, {
-		.name	= "Root Filesystem(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 22 * SZ_1M,
-	}, {
-		.name	= "User Filesystem(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data nhk8815_onenand_data = {
-	.parts		= nhk8815_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
-};
-
-static struct resource nhk8815_onenand_resource[] = {
-	{
-		.start		= 0x30000000,
-		.end		= 0x30000000 + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nhk8815_onenand_device = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &nhk8815_onenand_data,
-	},
-	.resource	= nhk8815_onenand_resource,
-	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
-};
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x)	(NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x)	(NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-static void __init nhk8815_onenand_init(void)
-{
-#ifdef CONFIG_MTD_ONENAND
-       /* Set up SMCS0 for OneNand */
-	writel(0x000030db, FSMC_BCR(0));
-	writel(0x02100551, FSMC_BTR(0));
-#endif
-}
-
-static struct mmci_platform_data mmcsd_plat_data = {
-	.ocr_mask = MMC_VDD_29_30,
-	.f_max = 48000000,
-	.gpio_wp = -1,
-	.gpio_cd = 111,
-	.cd_invert = true,
-	.capabilities = MMC_CAP_MMC_HIGHSPEED |
-	MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
-};
-
-static int __init nhk8815_mmcsd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(112, "card detect bias");
-	if (ret)
-		return ret;
-	gpio_direction_output(112, 0);
-	amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
-	return 0;
-}
-module_init(nhk8815_mmcsd_init);
-
-static struct resource nhk8815_eth_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x34000000 + 0x300,
-		.end = 0x34000000 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = NOMADIK_GPIO_TO_IRQ(115),
-		.end = NOMADIK_GPIO_TO_IRQ(115),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	}
-};
-
-static struct platform_device nhk8815_eth_device = {
-	.name = "smc91x",
-	.resource = nhk8815_eth_resources,
-	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
-};
-
-static int __init nhk8815_eth_init(void)
-{
-	int gpio_nr = 115; /* hardwired in the board */
-	int err;
-
-	err = gpio_request(gpio_nr, "eth_irq");
-	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
-	if (!err) err = gpio_direction_input(gpio_nr);
-	if (err)
-		pr_err("Error %i in %s\n", err, __func__);
-	return err;
-}
-device_initcall(nhk8815_eth_init);
-
-static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	&nhk8815_nand_device,
-	&nhk8815_onenand_device,
-	&nhk8815_eth_device,
-	/* will add more devices */
-};
-
-static void __init nomadik_timer_init(void)
-{
-	u32 src_cr;
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
-	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
-}
-
-static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("stw4811", 0x2d),
-	},
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("camera", 0x10),
-	},
-	{
-		I2C_BOARD_INFO("stw5095", 0x1a),
-	},
-	{
-		I2C_BOARD_INFO("lis3lv02dl", 0x1d),
-	},
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
-	{
-		I2C_BOARD_INFO("stw4811-usb", 0x2d),
-	},
-};
-
-static unsigned long out_low[] = { PIN_OUTPUT_LOW };
-static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
-static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
-static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
-
-static struct pinctrl_map __initdata nhk8815_pinmap[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
-	/* Hog in MMC/SD card mux */
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
-	/* MCCLK */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
-	/* MCCMD */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
-	/* MCCMDDIR */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
-	/* MCDAT3-0 */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
-	/* MCDAT0DIR */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
-	/* MCDAT31DIR */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
-	/* MCMSFBCLK */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
-	/* CD input GPIO */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
-	/* CD bias drive */
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
-};
-
-static void __init nhk8815_platform_init(void)
-{
-	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
-	cpu8815_platform_init();
-	nhk8815_onenand_init();
-	platform_add_devices(nhk8815_platform_devices,
-			     ARRAY_SIZE(nhk8815_platform_devices));
-
-	amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
-	amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
-
-	i2c_register_board_info(0, nhk8815_i2c0_devices,
-				ARRAY_SIZE(nhk8815_i2c0_devices));
-	i2c_register_board_info(1, nhk8815_i2c1_devices,
-				ARRAY_SIZE(nhk8815_i2c1_devices));
-	i2c_register_board_info(2, nhk8815_i2c2_devices,
-				ARRAY_SIZE(nhk8815_i2c2_devices));
-}
-
-MACHINE_START(NOMADIK, "NHK8815")
-	/* Maintainer: ST MicroElectronics */
-	.atag_offset	= 0x100,
-	.map_io		= cpu8815_map_io,
-	.init_irq	= cpu8815_init_irq,
-	.init_time	= nomadik_timer_init,
-	.init_machine	= nhk8815_platform_init,
-	.restart	= cpu8815_restart,
-MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 351404673f6c..21c1aa512640 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,138 +25,308 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
-#include <linux/irqchip/arm-vic.h>
+#include <linux/irqchip.h>
 #include <linux/platform_data/clk-nomadik.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/fsmc.h>
+#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
-#include "cpu-8815.h"
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+#define NOMADIK_UART1_VBASE	0xF01FB000
 
-/* The 8815 has 4 GPIO blocks, let's register them immediately */
-static resource_size_t __initdata cpu8815_gpio_base[] = {
-	NOMADIK_GPIO0_BASE,
-	NOMADIK_GPIO1_BASE,
-	NOMADIK_GPIO2_BASE,
-	NOMADIK_GPIO3_BASE,
+static unsigned long out_low[] = { PIN_OUTPUT_LOW };
+static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
+static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
+static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
+
+static struct pinctrl_map __initdata nhk8815_pinmap[] = {
+	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
+	/* Hog in MMC/SD card mux */
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
+	/* MCCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
+	/* MCCMD */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
+	/* MCCMDDIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
+	/* MCDAT3-0 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
+	/* MCDAT0DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
+	/* MCDAT31DIR */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
+	/* MCMSFBCLK */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
+	/* CD input GPIO */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
+	/* CD bias drive */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+	/* I2C0 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
+	/* I2C1 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
+	/* I2C2 */
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
+	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
 };
 
-static struct platform_device *
-cpu8815_add_gpio(int id, resource_size_t addr, int irq,
-		 struct nmk_gpio_platform_data *pdata)
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
+	{
+		.virtual =	NOMADIK_UART1_VBASE,
+		.pfn =		__phys_to_pfn(NOMADIK_UART1_BASE),
+		.length =	SZ_4K,
+		.type =		MT_DEVICE,
+	},
+};
+
+static void __init cpu8815_map_io(void)
 {
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(NULL, "gpio", id,
-				resources, ARRAY_SIZE(resources),
-				pdata, sizeof(*pdata));
+	iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
 }
 
-void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
-		       struct nmk_gpio_platform_data *pdata)
+static void cpu8815_restart(char mode, const char *cmd)
 {
-	int first = 0;
-	int i;
+	void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
 
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
+	/* FIXME: use egpio when implemented */
 
-		cpu8815_add_gpio(i, base[i], irq, pdata);
-	}
+	/* Write anything to Reset status register */
+	writel(1, srcbase + 0x18);
 }
 
-static inline void
-cpu8815_add_pinctrl(struct device *parent, const char *name)
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
+static void __init cpu8815_timer_init_of(void)
 {
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = -1,
-	};
+	struct device_node *mtu;
+	void __iomem *base;
+	int irq;
+	u32 src_cr;
+
+	/* We need this to be up now */
+	nomadik_clk_init();
+
+	mtu = of_find_node_by_path("/mtu0");
+	if (!mtu)
+		return;
+	base = of_iomap(mtu, 0);
+	if (WARN_ON(!base))
+		return;
+	irq = irq_of_parse_and_map(mtu, 0);
 
-	platform_device_register_full(&pdevinfo);
+	pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(base);
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, base);
+
+	nmdk_timer_init(base, irq);
 }
 
-static int __init cpu8815_init(void)
+static struct fsmc_nand_timings cpu8815_nand_timings = {
+	.thiz	= 0,
+	.thold	= 0x10,
+	.twait	= 0x0A,
+	.tset	= 0,
+};
+
+static struct fsmc_nand_platform_data cpu8815_nand_data = {
+	.nand_timings = &cpu8815_nand_timings,
+};
+
+/*
+ * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
+ * to simply request an IRQ passed as a resource. So the GPIO pin needs
+ * to be requested by this hog and set as input.
+ */
+static int __init cpu8815_eth_init(void)
 {
-	struct nmk_gpio_platform_data pdata = {
-		/* No custom data yet */
-	};
-
-	cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
-			  IRQ_GPIO0, &pdata);
-	cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
-	amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
-	amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
+	struct device_node *eth;
+	int gpio, irq, err;
+
+	eth = of_find_node_by_path("/usb-s8815/ethernet-gpio");
+	if (!eth) {
+		pr_info("could not find any ethernet GPIO\n");
+		return 0;
+	}
+	gpio = of_get_gpio(eth, 0);
+	err = gpio_request(gpio, "eth_irq");
+	if (err) {
+		pr_info("failed to request ethernet GPIO\n");
+		return -ENODEV;
+	}
+	err = gpio_direction_input(gpio);
+	if (err) {
+		pr_info("failed to set ethernet GPIO as input\n");
+		return -ENODEV;
+	}
+	irq = gpio_to_irq(gpio);
+	pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq);
 	return 0;
 }
-arch_initcall(cpu8815_init);
+device_initcall(cpu8815_eth_init);
 
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
-	{
-		.virtual =	NOMADIK_IO_VIRTUAL,
-		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
-		.length =	NOMADIK_IO_SIZE,
-		.type = 	MT_DEVICE,
-	}
-	/* static ram and secured ram may be added later */
+/*
+ * TODO:
+ * cannot be set from device tree, convert to a proper DT
+ * binding.
+ */
+static struct mmci_platform_data mmcsd_plat_data = {
+	.ocr_mask = MMC_VDD_29_30,
 };
 
-void __init cpu8815_map_io(void)
+/*
+ * This GPIO pin turns on a line that is used to detect card insertion
+ * on this board.
+ */
+static int __init cpu8815_mmcsd_init(void)
 {
-	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
-}
+	struct device_node *cdbias;
+	int gpio, err;
 
-void __init cpu8815_init_irq(void)
-{
-	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
-	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
-	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
-
-	/*
-	 * Init clocks here so that they are available for system timer
-	 * initialization.
-	 */
-	nomadik_clk_init();
+	cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio");
+	if (!cdbias) {
+		pr_info("could not find MMC/SD card detect bias node\n");
+		return 0;
+	}
+	gpio = of_get_gpio(cdbias, 0);
+	if (gpio < 0) {
+		pr_info("could not obtain MMC/SD card detect bias GPIO\n");
+		return 0;
+	}
+	err = gpio_request(gpio, "card detect bias");
+	if (err) {
+		pr_info("failed to request card detect bias GPIO %d\n", gpio);
+		return -ENODEV;
+	}
+	err = gpio_direction_output(gpio, 0);
+	if (err){
+		pr_info("failed to set GPIO %d as output, low\n", gpio);
+		return err;
+	}
+	pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio);
+	return 0;
 }
+device_initcall(cpu8815_mmcsd_init);
 
-/*
- * This function is called from the board init ("init_machine").
- */
- void __init cpu8815_platform_init(void)
+
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
+		"gpio.0", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
+		"gpio.1", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
+		"gpio.2", NULL),
+	OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
+		"gpio.3", NULL),
+	OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
+		"pinctrl-stn8815", NULL),
+	OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
+		"uart0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
+		"uart1", NULL),
+	OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
+		"rng", NULL),
+	OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
+		"rtc-pl031", NULL),
+	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
+		"fsmc-nand", &cpu8815_nand_data),
+	OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
+		"mmci", &mmcsd_plat_data),
+	{ /* sentinel */ },
+};
+
+static void __init cpu8815_init_of(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	/* At full speed latency must be >=2, so 0x249 in low bits */
-	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+	l2x0_of_init(0x00730249, 0xfe000fff);
 #endif
-	 return;
+	pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
+	of_platform_populate(NULL, of_default_bus_match_table,
+			cpu8815_auxdata_lookup, NULL);
 }
 
-void cpu8815_restart(char mode, const char *cmd)
-{
-	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
-	/* FIXME: use egpio when implemented */
+static const char * cpu8815_board_compat[] = {
+	"calaosystems,usb-s8815",
+	NULL,
+};
 
-	/* Write anything to Reset status register */
-	writel(1, src_rstsr);
-}
+DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
+	.map_io		= cpu8815_map_io,
+	.init_irq	= irqchip_init,
+	.init_time	= cpu8815_timer_init_of,
+	.init_machine	= cpu8815_init_of,
+	.restart	= cpu8815_restart,
+	.dt_compat      = cpu8815_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
deleted file mode 100644
index 71c21e8a11dc..000000000000
--- a/arch/arm/mach-nomadik/cpu-8815.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
-extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
deleted file mode 100644
index 0c2f6628299a..000000000000
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ /dev/null
@@ -1,88 +0,0 @@
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-/*
- * There are two busses in the 8815NHK.
- * They could, in theory, be driven by the hardware component, but we
- * use bit-bang through GPIO by now, to keep things simple
- */
-
-/* I2C0 connected to the STw4811 power management chip */
-static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
-	/* keep defaults for timeouts; pins are push-pull bidirectional */
-	.scl_pin = 62,
-	.sda_pin = 63,
-};
-
-/* I2C1 connected to various sensors */
-static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
-	/* keep defaults for timeouts; pins are push-pull bidirectional */
-	.scl_pin = 53,
-	.sda_pin = 54,
-};
-
-/* I2C2 connected to the USB portions of the STw4811 only */
-static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
-	/* keep defaults for timeouts; pins are push-pull bidirectional */
-	.scl_pin = 73,
-	.sda_pin = 74,
-};
-
-static struct platform_device nhk8815_i2c_dev0 = {
-	.name	= "i2c-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &nhk8815_i2c_data0,
-	},
-};
-
-static struct platform_device nhk8815_i2c_dev1 = {
-	.name	= "i2c-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &nhk8815_i2c_data1,
-	},
-};
-
-static struct platform_device nhk8815_i2c_dev2 = {
-	.name	= "i2c-gpio",
-	.id	= 2,
-	.dev	= {
-		.platform_data = &nhk8815_i2c_data2,
-	},
-};
-
-static pin_cfg_t cpu8815_pins_i2c[] = {
-	PIN_CFG_INPUT(62, GPIO, PULLUP),
-	PIN_CFG_INPUT(63, GPIO, PULLUP),
-	PIN_CFG_INPUT(53, GPIO, PULLUP),
-	PIN_CFG_INPUT(54, GPIO, PULLUP),
-	PIN_CFG_INPUT(73, GPIO, PULLUP),
-	PIN_CFG_INPUT(74, GPIO, PULLUP),
-};
-
-static int __init nhk8815_i2c_init(void)
-{
-	nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
-	platform_device_register(&nhk8815_i2c_dev0);
-	platform_device_register(&nhk8815_i2c_dev1);
-	platform_device_register(&nhk8815_i2c_dev2);
-
-	return 0;
-}
-
-static void __exit nhk8815_i2c_exit(void)
-{
-	platform_device_unregister(&nhk8815_i2c_dev0);
-	platform_device_unregister(&nhk8815_i2c_dev1);
-	platform_device_unregister(&nhk8815_i2c_dev2);
-	return;
-}
-
-module_init(nhk8815_i2c_init);
-module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
deleted file mode 100644
index 02035e459f50..000000000000
--- a/arch/arm/mach-nomadik/include/mach/hardware.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * YOU should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
-#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
-#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
-
-/* used in C code, so cast to proper type */
-#define io_p2v(x) ((void __iomem *)(x) \
-			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((unsigned long)(x) \
-			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-
-/* used in asm code, so no casts */
-#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-
-/*
- *   Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
-#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
-#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
-#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
-#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
-#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
-#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
-#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
-#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
-#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
-#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
-#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
-#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
-#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
-#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
-#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
-#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
-#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
-#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
-#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
-#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
-#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
-#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
-#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
-#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
-#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
-#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
-#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
-#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
-#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
-#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM	0x80010000
-#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 215f8cdb4004..90ac965a92fe 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -20,8 +20,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
-
 #define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
 
 /*
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index f527af6527c8..106fccca2021 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -21,7 +21,6 @@
 
 #include <asm/setup.h>
 #include <asm/io.h>
-#include <mach/hardware.h>
 
 /* we need the constants in amba/serial.h, but it refers to amba_device */
 struct amba_device;