diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-06 13:30:06 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-09-06 13:30:06 -0700 |
commit | b4b50fd78b1e31989940dfc647e64453d0f7176a (patch) | |
tree | 1a55f110e021c02963b63759f3f18ea7ba3aa228 /arch/arm/mach-kirkwood | |
parent | dccfd1e439c11422d7aca0d834b0430d24650e85 (diff) | |
parent | f97c43bbdf8a1ea42477b1a804a48e7e368cb13c (diff) |
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This branch contains mostly additions and changes to platform
enablement and SoC-level drivers. Since there's sometimes a
dependency on device-tree changes, there's also a fair amount of
those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad
Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving MSI
arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
ARM: dts: vf610-twr: enable i2c0 device
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: wandboard: Add support for SDIO bcm4329
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: imx53-qsb: Make USBH1 functional
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: imx: add ocram clock for imx53
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: dts: i.MX27: Remove clock name from CPU node
...
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.c | 26 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/pcie.c | 40 |
3 files changed, 43 insertions, 24 deletions
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 6e122ed3282f..682b7ac8deb8 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,7 @@ static void __init kirkwood_dt_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_dt_init()); kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 1663de090984..176761134a66 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -37,6 +37,12 @@ #include <linux/platform_data/dma-mv_xor.h> #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_NAND_TARGET 0x01 +#define KIRKWOOD_MBUS_NAND_ATTR 0x2f +#define KIRKWOOD_MBUS_SRAM_TARGET 0x03 +#define KIRKWOOD_MBUS_SRAM_ATTR 0x01 + /***************************************************************************** * I/O Address Mapping ****************************************************************************/ @@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - - mvebu_mbus_init("marvell,kirkwood-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } int kirkwood_tclk; @@ -666,10 +668,14 @@ char * __init kirkwood_id(void) void __init kirkwood_setup_wins(void) { - mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, - KIRKWOOD_NAND_MEM_SIZE); - mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, - KIRKWOOD_SRAM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET, + KIRKWOOD_MBUS_NAND_ATTR, + KIRKWOOD_NAND_MEM_PHYS_BASE, + KIRKWOOD_NAND_MEM_SIZE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET, + KIRKWOOD_MBUS_SRAM_ATTR, + KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE); } void __init kirkwood_l2_init(void) @@ -697,6 +703,10 @@ void __init kirkwood_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ddcb09f5bdd3..12d86f39f380 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -20,6 +20,16 @@ #include <mach/bridge-regs.h> #include "common.h" +/* These can go away once Kirkwood uses the mvebu-mbus DT binding */ +#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8 +#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0 +#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8 +#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4 +#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0 + static void kirkwood_enable_pcie_clk(const char *port) { struct clk *clk; @@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base) void __init kirkwood_pcie_init(unsigned int portmask) { - mvebu_mbus_add_window_remap_flags("pcie0.0", + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET, + KIRKWOOD_MBUS_PCIE0_IO_ATTR, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - KIRKWOOD_PCIE_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie0.0", - KIRKWOOD_PCIE_MEM_PHYS_BASE, - KIRKWOOD_PCIE_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); - mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET, + KIRKWOOD_MBUS_PCIE0_MEM_ATTR, + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE); + mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET, + KIRKWOOD_MBUS_PCIE1_IO_ATTR, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - KIRKWOOD_PCIE1_IO_BUS_BASE, - MVEBU_MBUS_PCI_IO); - mvebu_mbus_add_window_remap_flags("pcie1.0", - KIRKWOOD_PCIE1_MEM_PHYS_BASE, - KIRKWOOD_PCIE1_MEM_SIZE, - MVEBU_MBUS_NO_REMAP, - MVEBU_MBUS_PCI_MEM); + KIRKWOOD_PCIE1_IO_BUS_BASE); + mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET, + KIRKWOOD_MBUS_PCIE1_MEM_ATTR, + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE); vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; |