Merge commit '4cb38750d49010ae72e718d46605ac9ba5a851b4' into stable/for-linus-3.6

* commit '4cb38750d49010ae72e718d46605ac9ba5a851b4': (6849 commits)
  bcma: fix invalid PMU chip control masks
  [libata] pata_cmd64x: whitespace cleanup
  libata-acpi: fix up for acpi_pm_device_sleep_state API
  sata_dwc_460ex: device tree may specify dma_channel
  ahci, trivial: fixed coding style issues related to braces
  ahci_platform: add hibernation callbacks
  libata-eh.c: local functions should not be exposed globally
  libata-transport.c: local functions should not be exposed globally
  sata_dwc_460ex: support hardreset
  ata: use module_pci_driver
  drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
  pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
  ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
  [libata] Prevent interface errors with Seagate FreeAgent GoFlex
  drivers/acpi/glue: revert accidental license-related 6b66d95895c bits
  libata-acpi: add missing inlines in libata.h
  i2c-omap: Add support for I2C_M_STOP message flag
  i2c: Fall back to emulated SMBus if the operation isn't supported natively
  i2c: Add SCCB support
  i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter
  ...

1 files changed, 23 insertions, 8 deletions

diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index c17fa131728b..a6a4afb0ad62 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -28,11 +28,14 @@
 #define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
 #define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
 #define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)	/* HOST1 power mask */
 
 /* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)	/* OTG Polarity of Overcurrent */
 #define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_POL_BIT		(1 << 6)	/* UH1 Polarity of Overcurrent */
 #define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)	/* OTG Power Pin Polarity */
 
 /* USBH2CTRL */
 #define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
@@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		if (flags & MXC_EHCI_INTERNAL_PHY) {
 			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
+			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
 				/* OC/USBPWR is used */
 				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+			} else {
+				/* OC/USBPWR is not used */
+				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
 			}
+			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
+			else
+				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
 			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 			else
 				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			else
 				v &= ~MXC_OTG_UCTRL_OPM_BIT;
+			else
+				v |= MXC_OTG_UCTRL_OPM_BIT;
 			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 		}
 		break;
@@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		}
 
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
 		else
 			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
 		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 
 		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+			v |= MXC_H1_OC_POL_BIT;
+		else
+			v &= ~MXC_H1_OC_POL_BIT;
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
 		else
@@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 		}
 
 		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
 		else
 			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
 		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);