Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  + Linux 3.12-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

7 files changed, 86 insertions, 24 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3b07800536f7..c485157b0b5b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 05e4485a8225..8ac2ac1f69cc 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index def125c0eeaa..3058522f5aad 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -70,6 +70,8 @@
 
 			timer@20300 {
 				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -169,4 +171,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 417899002c41..40267a116c3c 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -505,6 +505,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -516,6 +517,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 8678e0c11119..6db4f81d4795 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -181,6 +181,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +201,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +210,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +221,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +247,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cf7aeaf89e9c..1335b2e1bed4 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -167,7 +168,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index bbeb623fc2c6..27ed9f5144bc 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -171,7 +171,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +197,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +230,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +241,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +252,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +278,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {