Merge tag 'linux-can-next-for-4.16-20180116' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2018-01-16

this is a pull request for net-next/master consisting of 9 patches.

This is a series of patches, some of them initially by Franklin S Cooper
Jr, which was picked up by Faiz Abbas. Faiz Abbas added some patches
while working on this series, I contributed one as well.

The first two patches add support to CAN device infrastructure to limit
the bitrate of a CAN adapter if the used CAN-transceiver has a certain
maximum bitrate.

The remaining patches improve the m_can driver. They add support for
bitrate limiting to the driver, clean up the driver and add support for
runtime PM.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
new file mode 100644
index 000000000000..0011f53ff159
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
@@ -0,0 +1,24 @@
+Generic CAN transceiver Device Tree binding
+------------------------------
+
+CAN transceiver typically limits the max speed in standard CAN and CAN FD
+modes. Typically these limitations are static and the transceivers themselves
+provide no way to detect this limitation at runtime. For this situation,
+the "can-transceiver" node can be used.
+
+Required Properties:
+ max-bitrate:	a positive non 0 value that determines the max
+		speed that CAN/CAN-FD can run. Any other value
+		will be ignored.
+
+Examples:
+
+Based on Texas Instrument's TCAN1042HGV CAN Transceiver
+
+m_can0 {
+	....
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 63e90421d029..ed614383af9c 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -43,6 +43,11 @@ Required properties:
 			  Please refer to 2.4.1 Message RAM Configuration in
 			  Bosch M_CAN user manual for details.
 
+Optional Subnode:
+- can-transceiver	: Can-transceiver subnode describing maximum speed
+			  that can be used for CAN/CAN-FD modes. See
+			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
+			  for details.
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
@@ -63,4 +68,8 @@ Board dts:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_m_can1>;
 	status = "enabled";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
 };