Merge branch 'locking/urgent' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

25 files changed, 190 insertions, 179 deletions

diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 43f78b88da28..df449d79b563 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -1,7 +1,7 @@
 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index c55df2911136..cd9c9f6a7cd9 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a
 min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
-The flags argument should normally be set to 0, but can be used to pass the
-PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
-MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
-case the device does not support legacy interrupt lines.
-
-By default this function will spread the interrupts around the available
-CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
-flag.
+The flags argument is used to specify which type of interrupt can be used
+by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
+any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
+pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
 
 To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
 vectors, use the following function:
@@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be
 capped to the supported limit, so there is no need to query the number of
 vectors supported beforehand:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES)
 	if (nvec < 0)
 		goto out_err;
 
@@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that
 number to pci_alloc_irq_vectors() function as both 'min_vecs' and
 'max_vecs' parameters:
 
-	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
@@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling
 the single MSI mode for a device.  It could be done by passing two 1s as
 'min_vecs' and 'max_vecs':
 
-	ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
 Some devices might not support using legacy line interrupts, in which case
-the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
-can't provide MSI or MSI-X interrupts:
+the driver can specify that only MSI or MSI-X is acceptable:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX);
 	if (nvec < 0)
 		goto out_err;
 
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 123881f62219..77f49dc5be23 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
 
 The ID table is an array of struct pci_device_id entries ending with an
 all-zero entry.  Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
 
 Each entry consists of:
 
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
index ffca443a19b4..15cdb7bc57c3 100644
--- a/Documentation/arm/CCN.txt
+++ b/Documentation/arm/CCN.txt
@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 4da60b463995..ccc60324e738 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -53,6 +53,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
 | ARM            | Cortex-A57      | #852523         | N/A                     |
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+| ARM            | Cortex-A72      | #853709         | N/A                     |
 | ARM            | MMU-500         | #841119,#826419 | N/A                     |
 |                |                 |                 |                         |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index d515d58962b9..2a3904030dea 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -14,6 +14,12 @@ add_random (RW)
 This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).
 
+dax (RO)
+--------
+This file indicates whether the device supports Direct Access (DAX),
+used by CPU-addressable storage to bypass the pagecache.  It shows '1'
+if true, '0' if not.
+
 discard_granularity (RO)
 -----------------------
 This shows the size of internal allocation of the device in bytes, if
@@ -46,6 +52,12 @@ hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
 
+io_poll (RW)
+------------
+When read, this file shows the total number of block IO polls and how
+many returned success.  Writing '0' to this file will disable polling
+for this device.  Writing any non-zero value will enable this feature.
+
 iostats (RW)
 -------------
 This file is used to control (on/off) the iostats accounting of the
@@ -151,5 +163,11 @@ device state. This means that it might not be safe to toggle the
 setting from "write back" to "write through", since that will also
 eliminate cache flushes issued by the kernel.
 
+write_same_max_bytes (RO)
+-------------------------
+This is the number of bytes the device can write in a single write-same
+command.  A value of '0' means write-same is not supported by this
+device.
+
 
 Jens Axboe <jens.axboe@oracle.com>, February 2009
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 96b7aa66c89c..106ae9c740b9 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -131,7 +131,7 @@ pygments_style = 'sphinx'
 todo_include_todos = False
 
 primary_domain = 'C'
-highlight_language = 'C'
+highlight_language = 'guess'
 
 # -- Options for HTML output ----------------------------------------------
 
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
index fc647492e940..8d9773f23550 100644
--- a/Documentation/cpu-freq/cpufreq-stats.txt
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@@ -103,7 +103,7 @@ Config Main Menu
 	Power management options (ACPI, APM)  --->
 		CPU Frequency scaling  --->
 			[*] CPU Frequency scaling
-			<*>   CPU frequency translation statistics 
+			[*]   CPU frequency translation statistics
 			[*]     CPU frequency translation statistics details
 
 
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
index bf99e2f24788..205593f56fe7 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -16,6 +16,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 88faa91125bf..3cd4c43a3260 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -10,7 +10,7 @@ Required properties:
 			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
 			family).
 
-- clock-names:		Should be "mmc".
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
 			See: Documentation/devicetree/bindings/resource-names.txt
 - clocks:		Phandle to the clock.
 			See: Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index f5561ac7e17e..936ab5b87324 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
index 6f6c2f8e908d..0741dff048dd 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -8,8 +8,6 @@ Required properties:
 - interrupts: Interrupt number for McPDM
 - interrupt-parent: The parent interrupt controller
 - ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks:  phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
 
 Example:
 
@@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 {
 	interrupt-parent = <&gic>;
 	ti,hwmods = "mcpdm";
 };
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-	status = "okay";
-};
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 41b817f7b670..88b6ea1ad290 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
 Required properties:
 - #cooling-cells:	Used to provide cooling device specific information
   Type: unsigned	while referring to it. Must be at least 2, in order
-  Size: one cell      	to specify minimum and maximum cooling state used
+  Size: one cell	to specify minimum and maximum cooling state used
 			in the reference. The first cell is the minimum
 			cooling state requested and the second cell is
 			the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@ Required properties:
 Optional property:
 - contribution:		The cooling contribution to the thermal zone of the
   Type: unsigned	referred cooling device at the referred trip point.
-  Size: one cell      	The contribution is a ratio of the sum
+  Size: one cell	The contribution is a ratio of the sum
 			of all cooling contributions within a thermal zone.
 
 Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@ Required properties:
   Size: one cell
 
 - thermal-sensors:	A list of thermal sensor phandles and sensor specifier
-  Type: list of 	used while monitoring the thermal zone.
+  Type: list of		used while monitoring the thermal zone.
   phandles + sensor
   specifier
 
@@ -473,7 +473,7 @@ thermal-zones {
 				  <&adc>;	/* pcb north */
 
 		/* hotspot = 100 * bandgap - 120 * adc + 484 */
-		coefficients = 		<100	-120	484>;
+		coefficients =		<100	-120	484>;
 
 		trips {
 			...
@@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
         thermal-sensors =  <&adc>;
 
 		/* hotspot = 1 * adc + 6000 */
-	coefficients = 		<1	6000>;
+	coefficients =		<1	6000>;
 
 (d) - Board thermal
 
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index d6259c786316..bcbf9710e4af 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
 moves it over to the old name.  The new file may be on a different
 filesystem, so both st_dev and st_ino of the file may change.
 
-Any open files referring to this inode will access the old data and
-metadata.  Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
 
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
 
 If a file with multiple hard links is copied up, then this will
 "break" the link.  Changes will not be propagated to other names
diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates
index 2a1bf69c6a26..8c10a916de20 100644
--- a/Documentation/hwmon/ftsteutates
+++ b/Documentation/hwmon/ftsteutates
@@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
 implemented in this driver.
 
 Specification of the chip can be found here:
-ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
-ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
+ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
+ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface
index 80807adb8ded..7e2a228f21bc 100644
--- a/Documentation/i2c/slave-interface
+++ b/Documentation/i2c/slave-interface
@@ -145,6 +145,11 @@ If you want to add slave support to the bus driver:
 
 * Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
 
+Note that most hardware supports being master _and_ slave on the same bus. So,
+if you extend a bus driver, please make sure that the driver supports that as
+well. In almost all cases, slave support does not need to disable the master
+functionality.
+
 Check the i2c-rcar driver as an example.
 
 
diff --git a/Documentation/kernel-documentation.rst b/Documentation/kernel-documentation.rst
index c4eb5049da39..391decc66a18 100644
--- a/Documentation/kernel-documentation.rst
+++ b/Documentation/kernel-documentation.rst
@@ -366,8 +366,6 @@ Domain`_ references.
 Cross-referencing from reStructuredText
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-.. highlight:: none
-
 To cross-reference the functions and types defined in the kernel-doc comments
 from reStructuredText documents, please use the `Sphinx C Domain`_
 references. For example::
@@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation.
 Function documentation
 ----------------------
 
-.. highlight:: c
-
 The general format of a function and function-like macro kernel-doc comment is::
 
   /**
@@ -572,8 +568,6 @@ DocBook XML [DEPRECATED]
 Converting DocBook to Sphinx
 ----------------------------
 
-.. highlight:: none
-
 Over time, we expect all of the documents under ``Documentation/DocBook`` to be
 converted to Sphinx and reStructuredText. For most DocBook XML documents, a good
 enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script,
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 46c030a49186..a4f4d693e2c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				PAGE_SIZE is used as alignment.
 				PCI-PCI bridge can be specified, if resource
 				windows need to be expanded.
+				To specify the alignment for several
+				instances of a device, the PCI vendor,
+				device, subvendor, and subdevice may be
+				specified, e.g., 4096@pci:8086:9c22:103c:198f
 		ecrc=		Enable/disable PCIe ECRC (transaction layer
 				end-to-end CRC checking).
 				bios: Use BIOS/firmware settings. This is the
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 9d05ed7f7da5..f20c884c048a 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
 TODO
 ====
 
-The platform device problem
----------------------------
-DSA is currently implemented as a platform device driver which is far from ideal
-as was discussed in this thread:
-
-http://permalink.gmane.org/gmane.linux.network/329848
-
-This basically prevents the device driver model to be properly used and applied,
-and support non-MDIO, non-MMIO Ethernet connected switches.
-
-Another problem with the platform device driver approach is that it prevents the
-use of a modular switch drivers build due to a circular dependency, illustrated
-here:
-
-http://comments.gmane.org/gmane.linux.network/345803
-
-Attempts of reworking this has been done here:
-
-https://lwn.net/Articles/643149/
-
 Making SWITCHDEV and DSA converge towards an unified codebase
 -------------------------------------------------------------
 
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index 16a924c486bf..70c926ae212d 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -790,13 +790,12 @@ The kernel interface functions are as follows:
      Data messages can have their contents extracted with the usual bunch of
      socket buffer manipulation functions.  A data message can be determined to
      be the last one in a sequence with rxrpc_kernel_is_data_last().  When a
-     data message has been used up, rxrpc_kernel_data_delivered() should be
-     called on it..
+     data message has been used up, rxrpc_kernel_data_consumed() should be
+     called on it.
 
-     Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose
-     of.  It is possible to get extra refs on all types of message for later
-     freeing, but this may pin the state of a call until the message is finally
-     freed.
+     Messages should be handled to rxrpc_kernel_free_skb() to dispose of.  It
+     is possible to get extra refs on all types of message for later freeing,
+     but this may pin the state of a call until the message is finally freed.
 
  (*) Accept an incoming call.
 
@@ -821,12 +820,14 @@ The kernel interface functions are as follows:
      Other errors may be returned if the call had been aborted (-ECONNABORTED)
      or had timed out (-ETIME).
 
- (*) Record the delivery of a data message and free it.
+ (*) Record the delivery of a data message.
 
-	void rxrpc_kernel_data_delivered(struct sk_buff *skb);
+	void rxrpc_kernel_data_consumed(struct rxrpc_call *call,
+					struct sk_buff *skb);
 
-     This is used to record a data message as having been delivered and to
-     update the ACK state for the call.  The socket buffer will be freed.
+     This is used to record a data message as having been consumed and to
+     update the ACK state for the call.  The message must still be passed to
+     rxrpc_kernel_free_skb() for disposal by the caller.
 
  (*) Free a message.
 
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index b96098ccfe69..708f87f78a75 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -164,7 +164,32 @@ load n/2 modules more and try again.
 Again, if you find the offending module(s), it(they) must be unloaded every time
 before hibernation, and please report the problem with it(them).
 
-c) Advanced debugging
+c) Using the "test_resume" hibernation option
+
+/sys/power/disk generally tells the kernel what to do after creating a
+hibernation image.  One of the available options is "test_resume" which
+causes the just created image to be used for immediate restoration.  Namely,
+after doing:
+
+# echo test_resume > /sys/power/disk
+# echo disk > /sys/power/state
+
+a hibernation image will be created and a resume from it will be triggered
+immediately without involving the platform firmware in any way.
+
+That test can be used to check if failures to resume from hibernation are
+related to bad interactions with the platform firmware.  That is, if the above
+works every time, but resume from actual hibernation does not work or is
+unreliable, the platform firmware may be responsible for the failures.
+
+On architectures and platforms that support using different kernels to restore
+hibernation images (that is, the kernel used to read the image from storage and
+load it into memory is different from the one included in the image) or support
+kernel address space randomization, it also can be used to check if failures
+to resume may be related to the differences between the restore and image
+kernels.
+
+d) Advanced debugging
 
 In case that hibernation does not work on your system even in the minimal
 configuration and compiling more drivers as modules is not practical or some
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index f1f0f59a7c47..974916ff6608 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -1,75 +1,76 @@
-Power Management Interface
-
-
-The power management subsystem provides a unified sysfs interface to 
-userspace, regardless of what architecture or platform one is
-running. The interface exists in /sys/power/ directory (assuming sysfs
-is mounted at /sys). 
-
-/sys/power/state controls system power state. Reading from this file
-returns what states are supported, which is hard-coded to 'freeze',
-'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
-(Suspend-to-Disk). 
-
-Writing to this file one of those strings causes the system to
-transition into that state. Please see the file
-Documentation/power/states.txt for a description of each of those
-states.
-
-
-/sys/power/disk controls the operating mode of the suspend-to-disk
-mechanism. Suspend-to-disk can be handled in several ways. We have a
-few options for putting the system to sleep - using the platform driver
-(e.g. ACPI or other suspend_ops), powering off the system or rebooting the
-system (for testing).
-
-Additionally, /sys/power/disk can be used to turn on one of the two testing
-modes of the suspend-to-disk mechanism: 'testproc' or 'test'.  If the
-suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
-/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
-tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs.  If it is
-in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
-to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
-for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs.  Then,
-we are able to look in the log messages and work out, for example, which code
-is being slow and which device drivers are misbehaving.
-
-Reading from this file will display all supported modes and the currently
-selected one in brackets, for example
-
-	[shutdown] reboot test testproc
-
-Writing to this file will accept one of
-
-       'platform' (only if the platform supports it)
-       'shutdown'
-       'reboot'
-       'testproc'
-       'test'
-
-/sys/power/image_size controls the size of the image created by
-the suspend-to-disk mechanism.  It can be written a string
-representing a non-negative integer that will be used as an upper
-limit of the image size, in bytes.  The suspend-to-disk mechanism will
-do its best to ensure the image size will not exceed that number.  However,
-if this turns out to be impossible, it will try to suspend anyway using the
-smallest image possible.  In particular, if "0" is written to this file, the
-suspend image will be as small as possible.
-
-Reading from this file will display the current image size limit, which
-is set to 2/5 of available RAM by default.
-
-/sys/power/pm_trace controls the code which saves the last PM event point in
-the RTC across reboots, so that you can debug a machine that just hangs
-during suspend (or more commonly, during resume).  Namely, the RTC is only
-used to save the last PM event point if this file contains '1'.  Initially it
-contains '0' which may be changed to '1' by writing a string representing a
-nonzero integer into it.
-
-To use this debugging feature you should attempt to suspend the machine, then
-reboot it and run
-
-	dmesg -s 1000000 | grep 'hash matches'
-
-CAUTION: Using it will cause your machine's real-time (CMOS) clock to be
-set to a random invalid time after a resume.
+Power Management Interface for System Sleep
+
+Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+The power management subsystem provides userspace with a unified sysfs interface
+for system sleep regardless of the underlying system architecture or platform.
+The interface is located in the /sys/power/ directory (assuming that sysfs is
+mounted at /sys).
+
+/sys/power/state is the system sleep state control file.
+
+Reading from it returns a list of supported sleep states, encoded as:
+
+'freeze' (Suspend-to-Idle)
+'standby' (Power-On Suspend)
+'mem' (Suspend-to-RAM)
+'disk' (Suspend-to-Disk)
+
+Suspend-to-Idle is always supported.  Suspend-to-Disk is always supported
+too as long the kernel has been configured to support hibernation at all
+(ie. CONFIG_HIBERNATION is set in the kernel configuration file).  Support
+for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the
+platform.
+
+If one of the strings listed in /sys/power/state is written to it, the system
+will attempt to transition into the corresponding sleep state.  Refer to
+Documentation/power/states.txt for a description of each of those states.
+
+/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk).
+Specifically, it tells the kernel what to do after creating a hibernation image.
+
+Reading from it returns a list of supported options encoded as:
+
+'platform' (put the system into sleep using a platform-provided method)
+'shutdown' (shut the system down)
+'reboot' (reboot the system)
+'suspend' (trigger a Suspend-to-RAM transition)
+'test_resume' (resume-after-hibernation test mode)
+
+The currently selected option is printed in square brackets.
+
+The 'platform' option is only available if the platform provides a special
+mechanism to put the system to sleep after creating a hibernation image (ACPI
+does that, for example).  The 'suspend' option is available if Suspend-to-RAM
+is supported.  Refer to Documentation/power/basic_pm_debugging.txt for the
+description of the 'test_resume' option.
+
+To select an option, write the string representing it to /sys/power/disk.
+
+/sys/power/image_size controls the size of hibernation images.
+
+It can be written a string representing a non-negative integer that will be
+used as a best-effort upper limit of the image size, in bytes.  The hibernation
+core will do its best to ensure that the image size will not exceed that number.
+However, if that turns out to be impossible to achieve, a hibernation image will
+still be created and its size will be as small as possible.  In particular,
+writing '0' to this file will enforce hibernation images to be as small as
+possible.
+
+Reading from this file returns the current image size limit, which is set to
+around 2/5 of available RAM by default.
+
+/sys/power/pm_trace controls the PM trace mechanism saving the last suspend
+or resume event point in the RTC across reboots.
+
+It helps to debug hard lockups or reboots due to device driver failures that
+occur during system suspend or resume (which is more common) more effectively.
+
+If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume
+event point in turn will be stored in the RTC memory (overwriting the actual
+RTC information), so it will survive a system crash if one occurs right after
+storing it and it can be used later to identify the driver that caused the crash
+to happen (see Documentation/power/s2ram.txt for more information).
+
+Initially it contains '0' which may be changed to '1' by writing a string
+representing a nonzero integer into it.
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt
index ba0a2a4a54ba..e32fdbb4c9a7 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.txt
@@ -167,6 +167,8 @@ signal will be rolled back anyway.
 For signals taken in non-TM or suspended mode, we use the
 normal/non-checkpointed stack pointer.
 
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
 
 Failure cause codes used by kernel
 ==================================
diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/rapidio/mport_cdev.txt
index 6e491a662461..a53f786ee2e9 100644
--- a/Documentation/rapidio/mport_cdev.txt
+++ b/Documentation/rapidio/mport_cdev.txt
@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
 
 III. Module parameters
 
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+        This parameter set a maximum completion wait time for SYNC mode DMA
+        transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
 - 'dbg_level' - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.
diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css
index 3a2ac4bcfd78..e88461c4c1e6 100644
--- a/Documentation/sphinx-static/theme_overrides.css
+++ b/Documentation/sphinx-static/theme_overrides.css
@@ -42,11 +42,12 @@
     caption a.headerlink { opacity: 0; }
     caption a.headerlink:hover { opacity: 1; }
 
-    /* inline literal: drop the borderbox and red color */
+    /* inline literal: drop the borderbox, padding and red color */
 
     code, .rst-content tt, .rst-content code {
         color: inherit;
         border: none;
+        padding: unset;
         background: inherit;
         font-size: 85%;
     }