Merge branch 'tracing/urgent' into tracing/core

Merge reason: Pick up fixes and move base from -rc1 to -rc5.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

25 files changed, 468 insertions, 156 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index 0a92a7c93a62..4f29e5f1ebfa 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.
diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 46b66ad1f1b4..4e8106f7cfd9 100644
--- a/Documentation/ABI/testing/sysfs-class-usb_host
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -1,4 +1,4 @@
-What:           /sys/class/usb_host/usb_hostN/wusb_chid
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 455d4e6d346d..0b33bfe7dde9 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index 59a91e5c6909..611f5a5499b1 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 89a47b5aff07..bc693fffabe0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -418,6 +418,14 @@ When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
 Who:	Johannes Berg <johannes@sipsolutions.net>
 
+---------------------------
+
+What:	CONFIG_INOTIFY
+When:	2.6.33
+Why:	last user (audit) will be converted to the newer more generic
+	and more easily maintained fsnotify subsystem
+Who:	Eric Paris <eparis@redhat.com>
+
 ----------------------------
 
 What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
@@ -451,3 +459,33 @@ Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
 	will also allow making ALSA OSS emulation independent of
 	sound_core.  The dependency will be broken then too.
 Who:	Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
+	dropped.
+When:	2.6.37 or earlier.
+Why:	With the recent innovations in CPU hardware acceleration technologies
+	from Intel and AMD, VMware ran a few experiments to compare these
+	techniques to guest paravirtualization technique on VMware's platform.
+	These hardware assisted virtualization techniques have outperformed the
+	performance benefits provided by VMI in most of the workloads. VMware
+	expects that these hardware features will be ubiquitous in a couple of
+	years, as a result, VMware has started a phased retirement of this
+	feature from the hypervisor. We will be removing this feature from the
+	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+	technical reasons (read opportunity to remove major chunk of pvops)
+	arise.
+
+	Please note that VMI has always been an optimization and non-VMI kernels
+	still work fine on VMware's platform.
+	Latest versions of VMware's product which support VMI are,
+	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+	releases for these products will continue supporting VMI.
+
+	For more details about VMI retirement take a look at this,
+	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who:	Alok N Kataria <akataria@vmware.com>
+
+----------------------------
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 570f9bd9be2b..05d5cf1d743f 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext3 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index 84eb26808dee..cb8a3a00cc92 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -1,5 +1,5 @@
 Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
 Jonathan Corbet <corbet@lwn.net>
 
 Large contiguous memory allocations can be unreliable in the Linux kernel.
@@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls.  With
 the current code, using flags to ask for high memory is likely to lead to
 notably unpleasant side effects.
 
+It is also possible to define flexible arrays at compile time with:
+
+    DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
 Storing data into a flexible array is accomplished with a call to:
 
     int flex_array_put(struct flex_array *array, unsigned int element_nr,
@@ -76,16 +83,30 @@ particular element has never been allocated.
 Note that it is possible to get back a valid pointer for an element which
 has never been stored in the array.  Memory for array elements is allocated
 one page at a time; a single allocation could provide memory for several
-adjacent elements.  The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present.  So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data.  If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
-
-There is no way to remove a single element from the array.  It is possible,
-though, to remove all elements with a call to:
+adjacent elements.  Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
+
+Individual elements in the array can be cleared with:
+
+    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero.  If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead.  Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+    int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
 
     void flex_array_free_parts(struct flex_array *array);
 
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21eb656c..c196a1846259 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3adc5d8..02838a47d862 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c740b7b41088..e89490270aba 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt
index 744687dd195b..8a366959f5cc 100644
--- a/Documentation/infiniband/user_mad.txt
+++ b/Documentation/infiniband/user_mad.txt
@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt
index f847501e50b5..afe3f8da9018 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.txt
@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 686e107923ec..5fe8de5cc727 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	to accepting or queueing the message. Errors occurring during the
 	actual processing of the message should be signaled with an
 	appropriate reply message.
+	May be called in process or interrupt context.
 	Calls to this function are not serialized by Kernel CAPI, ie. it must
 	be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
 	    The member is a pointer to a buffer containing the parameter in
 	    CAPI encoding (length + content). It may also be NULL, which will
 	    be taken to represent an empty (zero length) parameter.
+	    Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+	    (used only for the 'Additional Info' and 'B Protocol' parameters)
 	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
+	    CAPI_DEFAULT: The parameter is empty/absent.
+	    CAPI_COMPOSE: The parameter is present.
+	    Subparameter values are stored individually in the corresponding
+	    _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
 	be NULL if the command/subcommand is not one of those defined in the
 	CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1dc4b9cc20e5..c8d1b2be28ef 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
 			Append ",keep" to not disable it when the real console
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index ba9373f82ab5..098de5bce00a 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -42,7 +42,6 @@
 #include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
-#include <linux/virtio_ids.h>
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom
index f7e8104b5764..f7e8104b5764 100644
--- a/Documentation/i2c/chips/eeprom
+++ b/Documentation/misc-devices/eeprom
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875
index 10ca43cd1a72..1e89ee3ccc1b 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/misc-devices/max6875
@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index c6cf4a3c16e0..61bb645d50e0 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
index a6eb4add1be6..9605179711f4 100644
--- a/Documentation/scsi/hptiop.txt
+++ b/Documentation/scsi/hptiop.txt
@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 75fddb40f416..4c7f9aee5c4e 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -359,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  volknob	Fixes with volume-knob widget 0x24
   auto		BIOS setup (default)
 
 STAC92HD71B*
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 957b22fde2df..8179692fbb90 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1231,6 +1231,7 @@ something like this simple program:
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <unistd.h>
+#include <string.h>
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
@@ -1265,6 +1266,7 @@ const char *find_debugfs(void)
                return NULL;
        }
 
+       strcat(debugfs, "/tracing/");
        debugfs_found = 1;
 
        return debugfs;
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index 72a22f65960e..262d8e6793a3 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
 max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
                    Value 0 imposes no limit on the kernel pages KSM may use;
                    but note that any process using MADV_MERGEABLE can cause
                    KSM to allocate these pages, unswappable until it exits.
-                   Default: 2000 (chosen for demonstration purposes)
+                   Default: quarter of memory (chosen to not pin too much)
 
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
-                   e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
-                   Default: 200 (chosen for demonstration purposes)
+                   e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+                   Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs  - how many milliseconds ksmd should sleep before next scan
                    e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
@@ -70,7 +70,8 @@ run              - set 0 to stop ksmd from running but keep merged pages,
                    set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
                    set 2 to stop ksmd and unmerge all pages currently merged,
                          but leave mergeable areas registered for next run
-                   Default: 1 (for immediate use by apps which register)
+                   Default: 0 (must be changed to 1 to activate KSM,
+                               except if CONFIG_SYSFS is disabled)
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
@@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index fa1a30d9e9d5..3ec4f2a22585 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -2,7 +2,10 @@
  * page-types: Tool for querying page flags
  *
  * Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
  */
 
 #define _LARGEFILE64_SOURCE
@@ -69,7 +72,9 @@
 #define KPF_COMPOUND_TAIL	16
 #define KPF_HUGE		17
 #define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
 #define KPF_NOPAGE		20
+#define KPF_KSM			21
 
 /* [32-] kernel hacking assistances */
 #define KPF_RESERVED		32
@@ -116,7 +121,9 @@ static char *page_flag_names[] = {
 	[KPF_COMPOUND_TAIL]	= "T:compound_tail",
 	[KPF_HUGE]		= "G:huge",
 	[KPF_UNEVICTABLE]	= "u:unevictable",
+	[KPF_HWPOISON]		= "X:hwpoison",
 	[KPF_NOPAGE]		= "n:nopage",
+	[KPF_KSM]		= "x:ksm",
 
 	[KPF_RESERVED]		= "r:reserved",
 	[KPF_MLOCKED]		= "m:mlocked",
@@ -152,9 +159,6 @@ static unsigned long	opt_size[MAX_ADDR_RANGES];
 static int		nr_vmas;
 static unsigned long	pg_start[MAX_VMAS];
 static unsigned long	pg_end[MAX_VMAS];
-static unsigned long	voffset;
-
-static int		pagemap_fd;
 
 #define MAX_BIT_FILTERS	64
 static int		nr_bit_filters;
@@ -163,9 +167,16 @@ static uint64_t		opt_bits[MAX_BIT_FILTERS];
 
 static int		page_size;
 
-#define PAGES_BATCH	(64 << 10)	/* 64k pages */
+static int		pagemap_fd;
 static int		kpageflags_fd;
 
+static int		opt_hwpoison;
+static int		opt_unpoison;
+
+static char		*hwpoison_debug_fs = "/debug/hwpoison";
+static int		hwpoison_inject_fd;
+static int		hwpoison_forget_fd;
+
 #define HASH_SHIFT	13
 #define HASH_SIZE	(1 << HASH_SHIFT)
 #define HASH_MASK	(HASH_SIZE - 1)
@@ -207,6 +218,74 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
+int checked_open(const char *pathname, int flags)
+{
+	int fd = open(pathname, flags);
+
+	if (fd < 0) {
+		perror(pathname);
+		exit(EXIT_FAILURE);
+	}
+
+	return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+				 uint64_t *buf,
+				 unsigned long index,
+				 unsigned long count)
+{
+	long bytes;
+
+	if (index > ULONG_MAX / 8)
+		fatal("index overflow: %lu\n", index);
+
+	if (lseek(fd, index * 8, SEEK_SET) < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+
+	bytes = read(fd, buf, count * 8);
+	if (bytes < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+	if (bytes % 8)
+		fatal("partial read: %lu bytes\n", bytes);
+
+	return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+				     unsigned long index,
+				     unsigned long pages)
+{
+	return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+				  unsigned long index,
+				  unsigned long pages)
+{
+	return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+	unsigned long pfn;
+
+	if (val & PM_PRESENT)
+		pfn = PM_PFRAME(val);
+	else
+		pfn = 0;
+
+	return pfn;
+}
+
 
 /*
  * page flag names
@@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags)
  * page list and summary
  */
 
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+			    unsigned long offset, uint64_t flags)
 {
 	static uint64_t      flags0;
 	static unsigned long voff;
@@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags)
 	count  = 1;
 }
 
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+		      unsigned long offset, uint64_t flags)
 {
 	if (opt_pid)
 		printf("%lx\t", voffset);
@@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
 	return flags;
 }
 
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+	flags = expand_overloaded_flags(flags);
+
+	if (!opt_raw)
+		flags = well_known_flags(flags);
+
+	return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+	char buf[100];
+
+	if (opt_hwpoison && !hwpoison_inject_fd) {
+		sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+		hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+	}
+
+	if (opt_unpoison && !hwpoison_forget_fd) {
+		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+	}
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_inject_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison inject");
+		return len;
+	}
+	return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_forget_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison forget");
+		return len;
+	}
+	return 0;
+}
 
 /*
  * page frame walker
@@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags)
 	exit(EXIT_FAILURE);
 }
 
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+		     unsigned long offset, uint64_t flags)
 {
-	flags = expand_overloaded_flags(flags);
-
-	if (!opt_raw)
-		flags = well_known_flags(flags);
+	flags = kpageflags_flags(flags);
 
 	if (!bit_mask_ok(flags))
 		return;
 
+	if (opt_hwpoison)
+		hwpoison_page(offset);
+	if (opt_unpoison)
+		unpoison_page(offset);
+
 	if (opt_list == 1)
-		show_page_range(offset, flags);
+		show_page_range(voffset, offset, flags);
 	else if (opt_list == 2)
-		show_page(offset, flags);
+		show_page(voffset, offset, flags);
 
 	nr_pages[hash_slot(flags)]++;
 	total_pages++;
 }
 
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH	(64 << 10)	/* 64k pages */
+static void walk_pfn(unsigned long voffset,
+		     unsigned long index,
+		     unsigned long count)
 {
+	uint64_t buf[KPAGEFLAGS_BATCH];
 	unsigned long batch;
-	unsigned long n;
+	unsigned long pages;
 	unsigned long i;
 
-	if (index > ULONG_MAX / KPF_BYTES)
-		fatal("index overflow: %lu\n", index);
-
-	lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
-
 	while (count) {
-		uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
-
-		batch = min_t(unsigned long, count, PAGES_BATCH);
-		n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
-		if (n == 0)
+		batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+		pages = kpageflags_read(buf, index, batch);
+		if (pages == 0)
 			break;
-		if (n < 0) {
-			perror(PROC_KPAGEFLAGS);
-			exit(EXIT_FAILURE);
-		}
 
-		if (n % KPF_BYTES != 0)
-			fatal("partial read: %lu bytes\n", n);
-		n = n / KPF_BYTES;
+		for (i = 0; i < pages; i++)
+			add_page(voffset + i, index + i, buf[i]);
 
-		for (i = 0; i < n; i++)
-			add_page(index + i, kpageflags_buf[i]);
-
-		index += batch;
-		count -= batch;
+		index += pages;
+		count -= pages;
 	}
 }
 
-
-#define PAGEMAP_BATCH	4096
-static unsigned long task_pfn(unsigned long pgoff)
+#define PAGEMAP_BATCH	(64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
 {
-	static uint64_t buf[PAGEMAP_BATCH];
-	static unsigned long start;
-	static long count;
-	uint64_t pfn;
+	uint64_t buf[PAGEMAP_BATCH];
+	unsigned long batch;
+	unsigned long pages;
+	unsigned long pfn;
+	unsigned long i;
 
-	if (pgoff < start || pgoff >= start + count) {
-		if (lseek64(pagemap_fd,
-			    (uint64_t)pgoff * PM_ENTRY_BYTES,
-			    SEEK_SET) < 0) {
-			perror("pagemap seek");
-			exit(EXIT_FAILURE);
-		}
-		count = read(pagemap_fd, buf, sizeof(buf));
-		if (count == 0)
-			return 0;
-		if (count < 0) {
-			perror("pagemap read");
-			exit(EXIT_FAILURE);
-		}
-		if (count % PM_ENTRY_BYTES) {
-			fatal("pagemap read not aligned.\n");
-			exit(EXIT_FAILURE);
-		}
-		count /= PM_ENTRY_BYTES;
-		start = pgoff;
-	}
+	while (count) {
+		batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+		pages = pagemap_read(buf, index, batch);
+		if (pages == 0)
+			break;
 
-	pfn = buf[pgoff - start];
-	if (pfn & PM_PRESENT)
-		pfn = PM_PFRAME(pfn);
-	else
-		pfn = 0;
+		for (i = 0; i < pages; i++) {
+			pfn = pagemap_pfn(buf[i]);
+			if (pfn)
+				walk_pfn(index + i, pfn, 1);
+		}
 
-	return pfn;
+		index += pages;
+		count -= pages;
+	}
 }
 
 static void walk_task(unsigned long index, unsigned long count)
 {
-	int i = 0;
 	const unsigned long end = index + count;
+	unsigned long start;
+	int i = 0;
 
 	while (index < end) {
 
@@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count)
 		if (pg_start[i] >= end)
 			return;
 
-		voffset = max_t(unsigned long, pg_start[i], index);
-		index   = min_t(unsigned long, pg_end[i], end);
+		start = max_t(unsigned long, pg_start[i], index);
+		index = min_t(unsigned long, pg_end[i], end);
 
-		assert(voffset < index);
-		for (; voffset < index; voffset++) {
-			unsigned long pfn = task_pfn(voffset);
-			if (pfn)
-				walk_pfn(pfn, 1);
-		}
+		assert(start < index);
+		walk_vma(start, index - start);
 	}
 }
 
@@ -527,18 +639,14 @@ static void walk_addr_ranges(void)
 {
 	int i;
 
-	kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
-	if (kpageflags_fd < 0) {
-		perror(PROC_KPAGEFLAGS);
-		exit(EXIT_FAILURE);
-	}
+	kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
 
 	if (!nr_addr_ranges)
 		add_addr_range(0, ULONG_MAX);
 
 	for (i = 0; i < nr_addr_ranges; i++)
 		if (!opt_pid)
-			walk_pfn(opt_offset[i], opt_size[i]);
+			walk_pfn(0, opt_offset[i], opt_size[i]);
 		else
 			walk_task(opt_offset[i], opt_size[i]);
 
@@ -575,6 +683,8 @@ static void usage(void)
 "            -l|--list                 Show page details in ranges\n"
 "            -L|--list-each            Show page details one by one\n"
 "            -N|--no-summary           Don't show summay info\n"
+"            -X|--hwpoison             hwpoison pages\n"
+"            -x|--unpoison             unpoison pages\n"
 "            -h|--help                 Show this usage message\n"
 "addr-spec:\n"
 "            N                         one page at offset N (unit: pages)\n"
@@ -624,11 +734,7 @@ static void parse_pid(const char *str)
 	opt_pid = parse_number(str);
 
 	sprintf(buf, "/proc/%d/pagemap", opt_pid);
-	pagemap_fd = open(buf, O_RDONLY);
-	if (pagemap_fd < 0) {
-		perror(buf);
-		exit(EXIT_FAILURE);
-	}
+	pagemap_fd = checked_open(buf, O_RDONLY);
 
 	sprintf(buf, "/proc/%d/maps", opt_pid);
 	file = fopen(buf, "r");
@@ -788,6 +894,8 @@ static struct option opts[] = {
 	{ "list"      , 0, NULL, 'l' },
 	{ "list-each" , 0, NULL, 'L' },
 	{ "no-summary", 0, NULL, 'N' },
+	{ "hwpoison"  , 0, NULL, 'X' },
+	{ "unpoison"  , 0, NULL, 'x' },
 	{ "help"      , 0, NULL, 'h' },
 	{ NULL        , 0, NULL, 0 }
 };
@@ -799,7 +907,7 @@ int main(int argc, char *argv[])
 	page_size = getpagesize();
 
 	while ((c = getopt_long(argc, argv,
-				"rp:f:a:b:lLNh", opts, NULL)) != -1) {
+				"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
 		switch (c) {
 		case 'r':
 			opt_raw = 1;
@@ -825,6 +933,14 @@ int main(int argc, char *argv[])
 		case 'N':
 			opt_no_summary = 1;
 			break;
+		case 'X':
+			opt_hwpoison = 1;
+			prepare_hwpoison_fd();
+			break;
+		case 'x':
+			opt_unpoison = 1;
+			prepare_hwpoison_fd();
+			break;
 		case 'h':
 			usage();
 			exit(0);
@@ -844,7 +960,7 @@ int main(int argc, char *argv[])
 	walk_addr_ranges();
 
 	if (opt_list == 1)
-		show_page_range(0, 0);  /* drain the buffer */
+		show_page_range(0, 0, 0);  /* drain the buffer */
 
 	if (opt_no_summary)
 		return 0;
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index 600a304a828c..df09b9650a81 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -57,7 +57,9 @@ There are three components to pagemap:
     16. COMPOUND_TAIL
     16. HUGE
     18. UNEVICTABLE
+    19. HWPOISON
     20. NOPAGE
+    21. KSM
 
 Short descriptions to the page flags:
 
@@ -86,9 +88,15 @@ Short descriptions to the page flags:
 17. HUGE
     this is an integral part of a HugeTLB page
 
+19. HWPOISON
+    hardware detected memory corruption on this page: don't touch the data!
+
 20. NOPAGE
     no page frame exists at the requested address
 
+21. KSM
+    identical memory pages dynamically shared between one or more processes
+
     [IO related page flags]
  1. ERROR     IO error occurred
  3. UPTODATE  page has up-to-date data
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6fa5024..299b91c7609f 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device