Merge tag 'asoc-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linussound-4.7-rc1-2

ASoC: Updates for v4.7 part 2

Really sorry about this late pull request.  It looks like at the time I
sent my pull request for v4.7 there was some conflict or other issue
which caused my script to stop merging the ASoC branches at some point
after the HDMI changes.

It's all specific driver updates, including:

 - New drivers for MAX98371 and TAS5720.
 - SPI support for TLV320AIC32x4.
 - TDM support for STI Uniperf IPs.

This code should all have been in -next prior to the merge window apart
from some fixes, it dropped out on the 18th.

9 files changed, 131 insertions, 59 deletions

diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
index e98a9652ccc8..0127be360fe8 100644
--- a/Documentation/devicetree/bindings/regmap/regmap.txt
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -1,50 +1,29 @@
-Device-Tree binding for regmap
-
-The endianness mode of CPU & Device scenarios:
-Index     Device     Endianness properties
----------------------------------------------------
-1         BE         'big-endian'
-2         LE         'little-endian'
-3	  Native     'native-endian'
-
-For one device driver, which will run in different scenarios above
-on different SoCs using the devicetree, we need one way to simplify
-this.
+Devicetree binding for regmap
 
 Optional properties:
-- {big,little,native}-endian: these are boolean properties, if absent
-  then the implementation will choose a default based on the device
-  being controlled.  These properties are for register values and all
-  the buffers only.  Native endian means that the CPU and device have
-  the same endianness.
 
-Examples:
-Scenario 1 : CPU in LE mode & device in LE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-};
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
 
-Scenario 2 : CPU in LE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-	      big-endian;
-};
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
 
-Scenario 3 : CPU in BE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-};
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianess
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
 
-Scenario 4 : CPU in BE mode & device in LE mode.
+Examples:
+Scenario 1 : a register set in big-endian mode.
 dev: dev@40031000 {
-	      compatible = "name";
+	      compatible = "syscon";
 	      reg = <0x40031000 0x1000>;
+	      big-endian;
 	      ...
-	      little-endian;
 };
diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt
new file mode 100644
index 000000000000..6c285235e64b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98371.txt
@@ -0,0 +1,17 @@
+max98371 codec
+
+This device supports I2C mode only.
+
+Required properties:
+
+- compatible : "maxim,max98371"
+- reg : The chip select number on the I2C bus
+
+Example:
+
+&i2c {
+	max98371: max98371@0x31 {
+		compatible = "maxim,max98371";
+		reg = <0x31>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
index f205ce9e31dd..ac28cdb4910e 100644
--- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
@@ -1,15 +1,16 @@
-MT8173 with RT5650 RT5676 CODECS
+MT8173 with RT5650 RT5676 CODECS and HDMI via I2S
 
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+			and of the hdmi encoder node
 - mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
-		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,audio-codec = <&rt5650 &rt5676 &hdmi0>;
 		mediatek,platform = <&afe>;
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
index fe5a5ef1714d..5bfa6b60530b 100644
--- a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
@@ -5,11 +5,21 @@ Required properties:
 - mediatek,audio-codec: the phandles of rt5650 codecs
 - mediatek,platform: the phandle of MT8173 ASoC platform
 
+Optional subnodes:
+- codec-capture : the subnode of rt5650 codec capture
+Required codec-capture subnode properties:
+- sound-dai: audio codec dai name on capture path
+  <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
+  <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
+
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650";
 		mediatek,audio-codec = <&rt5650>;
 		mediatek,platform = <&afe>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
 	};
 
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 028fa1c82f50..4d9a83d9a017 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -37,17 +37,18 @@ Required properties:
 
   - dai-name: DAI name that describes the IP.
 
+  - IP mode: IP working mode depending on associated codec.
+	"HDMI" connected to HDMI codec and support IEC HDMI formats (player only).
+	"SPDIF" connected to SPDIF codec and support SPDIF formats (player only).
+	"PCM" PCM standard mode for I2S or TDM bus.
+	"TDM" TDM mode for TDM bus.
+
 Required properties ("st,sti-uni-player" compatibility only):
   - clocks: CPU_DAI IP clock source, listed in the same order than the
 	    CPU_DAI properties.
 
   - uniperiph-id: internal SOC IP instance ID.
 
-  - IP mode: IP working mode depending on associated codec.
-	"HDMI" connected to HDMI codec IP and IEC HDMI formats.
-	"SPDIF"connected to SPDIF codec and support SPDIF formats.
-	"PCM"  PCM standard mode for I2S or TDM bus.
-
 Optional properties:
   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
 	       external codecs connection.
@@ -56,6 +57,22 @@ Optional properties:
 
 Example:
 
+	sti_uni_player1: sti-uni-player@1 {
+		compatible = "st,sti-uni-player";
+		status = "okay";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+		reg = <0x8D81000 0x158>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 3 0 1>;
+		st,dai-name = "Uni Player #1 (I2S)";
+		dma-names = "tx";
+		st,uniperiph-id = <1>;
+		st,version = <5>;
+		st,mode = "TDM";
+	};
+
 	sti_uni_player2: sti-uni-player@2 {
 		compatible = "st,sti-uni-player";
 		status = "okay";
@@ -65,7 +82,7 @@ Example:
 		reg = <0x8D82000 0x158>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 4 0 1>;
-		dai-name = "Uni Player #1 (DAC)";
+		dai-name = "Uni Player #2 (DAC)";
 		dma-names = "tx";
 		uniperiph-id = <2>;
 		version = <5>;
@@ -82,7 +99,7 @@ Example:
 		interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 7 0 1>;
 		dma-names = "tx";
-		dai-name = "Uni Player #1 (PIO)";
+		dai-name = "Uni Player #3 (SPDIF)";
 		uniperiph-id = <3>;
 		version = <5>;
 		mode = "SPDIF";
@@ -99,6 +116,7 @@ Example:
 		dma-names = "rx";
 		dai-name = "Uni Reader #1 (HDMI RX)";
 		version = <3>;
+		st,mode = "PCM";
 	};
 
 2) sti-sas-codec: internal audio codec IPs driver
@@ -152,4 +170,20 @@ Example of audio card declaration:
 				sound-dai = <&sti_sasg_codec 0>;
 			};
 		};
+		simple-audio-card,dai-link@2 {
+			/* TDM playback  */
+			format = "left_j";
+			frame-inversion = <1>;
+			cpu {
+				sound-dai = <&sti_uni_player1>;
+				dai-tdm-slot-num = <16>;
+				dai-tdm-slot-width = <16>;
+				dai-tdm-slot-tx-mask =
+					<1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 3>;
+			};
+		};
 	};
diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt
index 0ac31d8d5ac4..b4959f10b74b 100644
--- a/Documentation/devicetree/bindings/sound/tas571x.txt
+++ b/Documentation/devicetree/bindings/sound/tas571x.txt
@@ -1,4 +1,4 @@
-Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers
+Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
 
 The codec is controlled through an I2C interface.  It also has two other
 signals that can be wired up to GPIOs: reset (strongly recommended), and
@@ -6,7 +6,11 @@ powerdown (optional).
 
 Required properties:
 
-- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719"
+- compatible: should be one of the following:
+  - "ti,tas5711",
+  - "ti,tas5717",
+  - "ti,tas5719",
+  - "ti,tas5721"
 - reg: The I2C address of the device
 - #sound-dai-cells: must be equal to 0
 
@@ -25,6 +29,8 @@ Optional properties:
 - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
 - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
 - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
+- DRVDD-supply: regulator phandle for the DRVDD supply (5721)
+- PVDD-supply: regulator phandle for the PVDD supply (5721)
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt
new file mode 100644
index 000000000000..806ea7381483
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas5720.txt
@@ -0,0 +1,25 @@
+Texas Instruments TAS5720 Mono Audio amplifier
+
+The TAS5720 serial control bus communicates through the I2C protocol only. The
+serial bus is also used for periodic codec fault checking/reporting during
+audio playback. For more product information please see the links below:
+
+http://www.ti.com/product/TAS5720L
+http://www.ti.com/product/TAS5720M
+
+Required properties:
+
+- compatible : "ti,tas5720"
+- reg : I2C slave address
+- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry
+- pvdd-supply : phandle to a supply used for the Class-D amp and the analog
+
+Example:
+
+tas5720: tas5720@6c {
+	status = "okay";
+	compatible = "ti,tas5720";
+	reg = <0x6c>;
+	dvdd-supply = <&vdd_3v3_reg>;
+	pvdd-supply = <&amp_supply_reg>;
+};
diff --git a/Documentation/networking/checksum-offloads.txt b/Documentation/networking/checksum-offloads.txt
index de2a327766a7..56e36861245f 100644
--- a/Documentation/networking/checksum-offloads.txt
+++ b/Documentation/networking/checksum-offloads.txt
@@ -69,18 +69,18 @@ LCO: Local Checksum Offload
 LCO is a technique for efficiently computing the outer checksum of an
  encapsulated datagram when the inner checksum is due to be offloaded.
 The ones-complement sum of a correctly checksummed TCP or UDP packet is
- equal to the sum of the pseudo header, because everything else gets
- 'cancelled out' by the checksum field.  This is because the sum was
+ equal to the complement of the sum of the pseudo header, because everything
+ else gets 'cancelled out' by the checksum field.  This is because the sum was
  complemented before being written to the checksum field.
 More generally, this holds in any case where the 'IP-style' ones complement
  checksum is used, and thus any checksum that TX Checksum Offload supports.
 That is, if we have set up TX Checksum Offload with a start/offset pair, we
- know that _after the device has filled in that checksum_, the ones
+ know that after the device has filled in that checksum, the ones
  complement sum from csum_start to the end of the packet will be equal to
- _whatever value we put in the checksum field beforehand_.  This allows us
- to compute the outer checksum without looking at the payload: we simply
- stop summing when we get to csum_start, then add the 16-bit word at
- (csum_start + csum_offset).
+ the complement of whatever value we put in the checksum field beforehand.
+ This allows us to compute the outer checksum without looking at the payload:
+ we simply stop summing when we get to csum_start, then add the complement of
+ the 16-bit word at (csum_start + csum_offset).
 Then, when the true inner checksum is filled in (either by hardware or by
  skb_checksum_help()), the outer checksum will become correct by virtue of
  the arithmetic.
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 57653a44b128..fcddfd5ded99 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -645,7 +645,7 @@ allowed to execute.
 perf_event_paranoid:
 
 Controls use of the performance events system by unprivileged
-users (without CAP_SYS_ADMIN).  The default value is 1.
+users (without CAP_SYS_ADMIN).  The default value is 2.
 
  -1: Allow use of (almost) all events by all users
 >=0: Disallow raw tracepoint access by users without CAP_IOC_LOCK