Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Extend slot-gpio to be used for host specific card detect interrupts
   - Align to common busy polling behaviour for mmc ioctls
   - Suggest the BFQ I/O scheduler to be built along with MMC/SD support
   - Add devm_mmc_alloc_host() to enable further cleanups in host drivers

  MMC host:
   - atmel-mci: Fix race condition when stopping/starting a command
   - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
   - dw_mmc-rockchip: Add support for the RK3588 variant
   - jz4740: Add support for the vqmmc power supply
   - meson-gx: Convert the DT bindings to the dt-schema
   - meson-gx: Enable the platform interrupt to be used for card detect
   - moxart: Set the supported maximum request/block/segment sizes
   - renesas,sdhi: Add support for the RZ/V2M variants
   - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
   - sdhci-esdhc-imx: Improve tuning logic support
   - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
   - sdhci-of-dwcmshc: Add the missing device table IDs for acpi
   - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
   - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
   - sdhci-pxav2: Add support for the PXA168 V1 variant
   - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
   - uniphier-sd: Add support for SD UHS-I speed modes"

* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
  mmc: meson-gx: constify member data of struct meson_host
  mmc: meson-gx: use devm_clk_get_enabled() for core clock
  mmc: core: fix return value check in devm_mmc_alloc_host()
  dt-bindings: mmc: meson-gx: fix interrupt binding
  mmc: meson-gx: support platform interrupt as card detect interrupt
  dt-bindings: mmc: meson-gx: support specifying cd interrupt
  mmc: core: support setting card detect interrupt from drivers
  mmc: starfive: Add sdio/emmc driver support
  dt-bindings: mmc: Add StarFive MMC module
  dt-bindings: mmc: sdhci-msm: Allow 1 icc path
  dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
  mmc: core: Align to common busy polling behaviour for mmc ioctls
  dt-bindings: mmc: Add resets property to cadence SDHCI binding
  mmc: meson-gx: remove meson_mmc_get_cd
  mmc: moxart: set maximum request/block/segment sizes
  mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
  mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
  mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
  mmc: jz4740: Add support for vqmmc power supply
  ...

26 files changed, 256 insertions, 96 deletions

diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
index 02ecc93417ef..0ccd632d5620 100644
--- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Allwinner A10 MMC Controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
new file mode 100644
index 000000000000..bc403ae9e5d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-gx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+description:
+  The MMC 5.1 compliant host controller on Amlogic provides the
+  interface for SD, eMMC and SDIO devices
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-axg-mmc
+      - items:
+          - const: amlogic,meson-gx-mmc
+          - const: amlogic,meson-gxbb-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: mmc controller instance
+      - description: card detect
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: clkin0
+      - const: clkin1
+
+  resets:
+    maxItems: 1
+
+  amlogic,dram-access-quirk:
+    type: boolean
+    description:
+      set when controller's internal DMA engine cannot access the DRAM memory,
+      like on the G12A dedicated SDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc@70000 {
+        compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+        reg = <0x70000 0x2000>;
+        interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clk_mmc>, <&xtal>, <&clk_div>;
+        clock-names = "core", "clkin0", "clkin1";
+        pinctrl-0 = <&emm_pins>;
+        resets = <&reset_mmc>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
deleted file mode 100644
index ccc5358db131..000000000000
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Amlogic SD / eMMC controller for S905/GXBB family SoCs
-
-The MMC 5.1 compliant host controller on Amlogic provides the
-interface for SD, eMMC and SDIO devices.
-
-This file documents the properties in addition to those available in
-the MMC core bindings, documented by mmc.txt.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gx-mmc"
-  - "amlogic,meson-gxbb-mmc"
-  - "amlogic,meson-gxl-mmc"
-  - "amlogic,meson-gxm-mmc"
-  - "amlogic,meson-axg-mmc"
-- clocks     : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"core" - Main peripheral bus clock
-	"clkin0" - Parent clock of internal mux
-	"clkin1" - Other parent clock of internal mux
-  The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
-  clock rate requested by the MMC core.
-- resets     : phandle of the internal reset line
-
-Optional properties:
-- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
-  DRAM memory, like on the G12A dedicated SDIO controller.
-
-Example:
-
-	sd_emmc_a: mmc@70000 {
-		compatible = "amlogic,meson-gxbb-mmc";
-		reg = <0x0 0x70000 0x0 0x2000>;
-		interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
-		clock-names = "core", "clkin0", "clkin1";
-		pinctrl-0 = <&emmc_pins>;
-		resets = <&reset RESET_SD_EMMC_A>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
index 1c391bec43dc..1a6cda82f296 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Amlogic Meson SDHC controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 4053de758db6..8296c34cfa00 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Arasan SDHCI Controller
 
@@ -10,7 +10,7 @@ maintainers:
   - Adrian Hunter <adrian.hunter@intel.com>
 
 allOf:
-  - $ref: "mmc-controller.yaml#"
+  - $ref: mmc-controller.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index 8b1a0fdcb5e3..adacd0535c14 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -29,6 +29,9 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   # PHY DLL input delays:
   # They are used to delay the data valid window, and align the window to
   # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
@@ -36,43 +39,43 @@ properties:
 
   cdns,phy-input-delay-sd-highspeed:
     description: Value of the delay in the input path for SD high-speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-legacy:
     description: Value of the delay in the input path for legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr12:
     description: Value of the delay in the input path for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr25:
     description: Value of the delay in the input path for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr50:
     description: Value of the delay in the input path for SD UHS SDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-ddr50:
     description: Value of the delay in the input path for SD UHS DDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-mmc-highspeed:
     description: Value of the delay in the input path for MMC high-speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
@@ -83,7 +86,7 @@ properties:
   # Each delay property represents the fraction of the clock period.
   # The approximate delay value will be
   # (<delay property value>/128)*sdmclk_clock_period.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
@@ -91,7 +94,7 @@ properties:
     description: |
       Value of the delay introduced on the sdclk output for all modes except
       HS200, HS400 and HS400_ES.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
@@ -99,7 +102,7 @@ properties:
     description: |
       Value of the delay introduced on the sdclk output for HS200, HS400 and
       HS400_ES speed modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
@@ -107,7 +110,7 @@ properties:
     description: |
       Value of the delay introduced on the dat_strobe input used in
       HS400 / HS400_ES speed modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index dc6256f04b42..7f721fbfb009 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 description: |
   The Enhanced Secure Digital Host Controller on Freescale i.MX family
@@ -29,15 +29,24 @@ properties:
           - fsl,imx53-esdhc
           - fsl,imx6q-usdhc
           - fsl,imx6sl-usdhc
-          - fsl,imx6sll-usdhc
           - fsl,imx6sx-usdhc
-          - fsl,imx6ull-usdhc
           - fsl,imx7d-usdhc
           - fsl,imx7ulp-usdhc
           - fsl,imx8mm-usdhc
           - fsl,imxrt1050-usdhc
           - nxp,s32g2-usdhc
       - items:
+          - const: fsl,imx50-esdhc
+          - const: fsl,imx53-esdhc
+      - items:
+          - enum:
+              - fsl,imx6sll-usdhc
+              - fsl,imx6ull-usdhc
+          - const: fsl,imx6sx-usdhc
+      - items:
+          - const: fsl,imx7d-usdhc
+          - const: fsl,imx6sl-usdhc
+      - items:
           - enum:
               - fsl,imx8mq-usdhc
           - const: fsl,imx7d-usdhc
@@ -98,12 +107,12 @@ properties:
       Specify the number of delay cells for override mode.
       This is used to set the clock delay for DLL(Delay Line) on override mode
       to select a proper data sampling window in case the clock quality is not good
-      due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+      because the signal path is too long on the board. Please refer to eSDHC/uSDHC
       chapter, DLL (Delay Line) section in RM for details.
     default: 0
 
   voltage-ranges:
-    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     description: |
       Specify the voltage range in case there are software transparent level
       shifters on the outputs of the controller. Two cells are required, first
@@ -127,7 +136,7 @@ properties:
       Specify the increasing delay cell steps in tuning procedure.
       The uSDHC use one delay cell as default increasing step to do tuning process.
       This property allows user to change the tuning step to more than one delay
-      cells which is useful for some special boards or cards when the default
+      cell which is useful for some special boards or cards when the default
       tuning step can't find the proper delay window within limited tuning retries.
     default: 0
 
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
index ffa162722b8e..221f5bc047bd 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Markus Pargmann <mpa@pengutronix.de>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
index fa6cfe092fc9..1f63faf17743 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Microchip Sparx5 Mobile Storage Host Controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Lars Povlsen <lars.povlsen@microchip.com>
@@ -35,7 +35,7 @@ properties:
   microchip,clock-delay:
     description: Delay clock to card to meet setup time requirements.
       Each step increase by 1.25ns.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 15
 
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
index 911a5996e099..588be73168fa 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-emmc";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index 3397dbff88c2..b35e00e8c65e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -35,7 +35,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    wifi_pwrseq: wifi_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-sd8787";
       powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
       reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 64e3644eefeb..00feaafc1063 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-simple";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
       clocks = <&clk_32768_ck>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
index c0662ce9946d..36acc40c7d18 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
   - $ref: /schemas/spi/spi-peripheral-props.yaml
 
 description: |
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index bec8f8c71ff2..32e512a68ed6 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -17,7 +17,7 @@ description: |
   and the properties used by the mxsmmc driver.
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
index fda0b45ee577..72987f0326a1 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -99,53 +99,53 @@ properties:
 
       The DQS trim values are only used on controllers which support HS400
       timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,default-trim:
     description: Specify the default outbound clock trimmer value.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,dqs-trim:
     description: Specify DQS trim value for HS400 timing.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-1v8:
     description: Specify drive strength calibration offsets for 1.8 V
       signaling modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-1v8-timeout:
     description: Specify drive strength used as a fallback in case the
       automatic calibration times out on a 1.8 V signaling mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-3v3:
     description: Specify drive strength calibration offsets for 3.3 V
       signaling modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-3v3-timeout:
     description: Specify drive strength used as a fallback in case the
       automatic calibration times out on a 3.3 V signaling mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-sdr104:
     description: Specify drive strength calibration offsets for SDR104 mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-down-offset-hs400:
     description: Specify drive strength calibration offsets for HS400 mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-1v8:
     description: Specify drive strength calibration offsets for 1.8 V
       signaling modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-1v8-timeout:
     description: Specify drive strength used as a fallback in case the
       automatic calibration times out on a 1.8 V signaling mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-3v3:
     description: Specify drive strength calibration offsets for 3.3 V
@@ -157,25 +157,25 @@ properties:
       refer to the reference manual of the SoC for correct values. The SDR104
       and HS400 timing specific values are used in corresponding modes if
       specified.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-3v3-timeout:
     description: Specify drive strength used as a fallback in case the
       automatic calibration times out on a 3.3 V signaling mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-sdr104:
     description: Specify drive strength calibration offsets for SDR104 mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,pad-autocal-pull-up-offset-hs400:
     description: Specify drive strength calibration offsets for HS400 mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   nvidia,only-1-8v:
     description: The presence of this property indicates that the controller
       operates at a 1.8 V fixed I/O voltage.
-    $ref: "/schemas/types.yaml#/definitions/flag"
+    $ref: /schemas/types.yaml#/definitions/flag
 
 required:
   - compatible
@@ -186,7 +186,7 @@ required:
   - reset-names
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index b0d81ebe0f6e..1b7d88ed3799 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Actions Semi Owl SoCs SD/MMC/SDIO controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
index c36ba561c387..024313b79ec9 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 7bfb10c62566..7756a8687eaf 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas SDHI SD/MMC controller
 
@@ -59,6 +59,7 @@ properties:
               - renesas,sdhi-r9a07g043 # RZ/G2UL
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
               - renesas,sdhi-r9a07g054 # RZ/V2L
+              - renesas,sdhi-r9a09g011 # RZ/V2M
           - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
       - items:
           - enum:
@@ -111,7 +112,7 @@ properties:
   max-frequency: true
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
   - if:
       properties:
@@ -121,6 +122,7 @@ allOf:
               - renesas,sdhi-r9a07g043
               - renesas,sdhi-r9a07g044
               - renesas,sdhi-r9a07g054
+              - renesas,sdhi-r9a09g011
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index c7e14b7dba9e..211cd0b0bc5f 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -14,7 +14,7 @@ description:
   file and the Rockchip specific extensions.
 
 allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - $ref: synopsys-dw-mshc-common.yaml#
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -39,6 +39,7 @@ properties:
               - rockchip,rk3368-dw-mshc
               - rockchip,rk3399-dw-mshc
               - rockchip,rk3568-dw-mshc
+              - rockchip,rk3588-dw-mshc
               - rockchip,rv1108-dw-mshc
               - rockchip,rv1126-dw-mshc
           - const: rockchip,rk3288-dw-mshc
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
index fdaa18481aa0..6ee78a38bd74 100644
--- a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -112,7 +112,7 @@ required:
   - samsung,dw-mshc-sdr-timing
 
 allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - $ref: synopsys-dw-mshc-common.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 6b89238f0565..64df6919abaf 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -34,6 +34,8 @@ properties:
           - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
       - items:
           - enum:
+              - qcom,ipq5332-sdhci
+              - qcom,ipq9574-sdhci
               - qcom,qcs404-sdhci
               - qcom,sc7180-sdhci
               - qcom,sc7280-sdhci
@@ -125,11 +127,13 @@ properties:
       phandle to apps_smmu node with sid mask.
 
   interconnects:
+    minItems: 1
     items:
       - description: data path, sdhc to ddr
       - description: config path, cpu to sdhc
 
   interconnect-names:
+    minItems: 1
     items:
       - const: sdhc-ddr
       - const: cpu-sdhc
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index 3d46c2525787..09455f9fa8de 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell PXA SDHCI v2/v3
+title: Marvell PXA SDHCI v1/v2/v3
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -34,6 +34,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - mrvl,pxav1-mmc
       - mrvl,pxav2-mmc
       - mrvl,pxav3-mmc
       - marvell,armada-380-sdhci
@@ -61,6 +62,22 @@ properties:
       - const: io
       - const: core
 
+  pinctrl-names:
+    description:
+      Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
+      SDIO CMD and GPIO mode.
+    items:
+      - const: default
+      - const: state_cmd_gpio
+
+  pinctrl-0:
+    description:
+      Should contain default pinctrl.
+
+  pinctrl-1:
+    description:
+      Should switch CMD pin to GPIO mode as a high output.
+
   mrvl,clk-delay-cycles:
     description: Specify a number of cycles to delay for tuning.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
index a586fad0a46b..c71424aeaccd 100644
--- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -55,6 +55,16 @@ properties:
     minItems: 1
     maxItems: 3
 
+  socionext,syscon-uhs-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures UHS mode
+          - description: ID of SD instance
+    description:
+      A phandle to syscon with one argument that configures UHS mode.
+      The argument is the ID of SD instance.
+
 allOf:
   - $ref: mmc-controller.yaml
 
diff --git a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
new file mode 100644
index 000000000000..51e1b04e799f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/starfive,jh7110-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Designware Mobile Storage Host Controller
+
+description:
+  StarFive uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: biu clock
+      - description: ciu clock
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  interrupts:
+    maxItems: 1
+
+  starfive,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller syscon node
+          - description: offset of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: shift of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: mask of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+    description:
+      Should be four parameters, the phandle to System Register Controller
+      syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register
+      for MMC controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - starfive,sysreg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@16010000 {
+        compatible = "starfive,jh7110-mmc";
+        reg = <0x16010000 0x10000>;
+        clocks = <&syscrg 91>,
+                 <&syscrg 93>;
+        clock-names = "biu","ciu";
+        resets = <&syscrg 64>;
+        reset-names = "reset";
+        interrupts = <74>;
+        fifo-depth = <32>;
+        fifo-watermark-aligned;
+        data-addr = <0>;
+        starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
index 23aa8e6b2d70..611687166735 100644
--- a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Li-hao Kuo <lhjeff911@gmail.com>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
index 8dfad89c78a7..6f11b2adf103 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Synopsys Designware Mobile Storage Host Controller Common Properties
 
 allOf:
-  - $ref: "mmc-controller.yaml#"
+  - $ref: mmc-controller.yaml#
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>