Merge tag 'asoc-v3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linussound-3.14-rc7

ASoC: Fixes for v3.14

A few things here:
 - Avoid memory leaks in error cases with DPCM, this code has never been
   that well tested in mainline due to the lack of mainline drivers but
   we now have one queued for the merge window!
 - Fix the N810 audio driver to load when booted with DT since the
   platform was converted to DT during the merge window.
 - Fixes for initialisation of some MFD drivers that are probably unused
   in mainline

12 files changed, 243 insertions, 85 deletions

diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index a2ccec35ffce..ad22fb0ee765 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -3,8 +3,7 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 tty devices used for the console,
-		 like 'tty1 ttyS0'.
+		 console devices, like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a8d01005f480..10a93696e55a 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer.  It simply
 has to request that the PCI layer set up the MSI capability for this
 device.
 
-4.2.1 pci_enable_msi_range
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call allocates ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device is switched from
+pin-based interrupt mode to MSI mode.  The dev->irq number is changed
+to a new number which represents the message signaled interrupt;
+consequently, this function should be called before the driver calls
+request_irq(), because an MSI is delivered via a vector that is
+different from the vector of a pin-based interrupt.
+
+4.2.2 pci_enable_msi_range
 
 int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
 
@@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
 	return pci_enable_msi_range(pdev, nvec, nvec);
 }
 
+Note, unlike pci_enable_msi_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msi_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msi_exact() does).
+
 4.2.1.3 Single MSI mode
 
 The most notorious example of the request type described above is
@@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev)
 	return pci_enable_msi_range(pdev, 1, 1);
 }
 
-4.2.2 pci_disable_msi
+Note, unlike pci_enable_msi() function, which could be also used to
+enable the single MSI mode, pci_enable_msi_range() returns either a
+negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
+does).
+
+4.2.3 pci_enable_msi_exact
+
+int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+
+This variation on pci_enable_msi_range() call allows a device driver to
+request exactly 'nvec' MSIs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
+returns zero in case of success, which indicates MSI interrupts have been
+successfully allocated.
+
+4.2.4 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
@@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq().
 Failure to do so results in a BUG_ON(), leaving the device with
 MSI enabled and thus leaking its vector.
 
-4.2.3 pci_msi_vec_count
+4.2.4 pci_msi_vec_count
 
 int pci_msi_vec_count(struct pci_dev *dev)
 
@@ -257,8 +294,8 @@ possible, likely up to the limit returned by pci_msix_vec_count() function:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
-				    1, nvec);
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+				     1, nvec);
 }
 
 Note the value of 'minvec' parameter is 1.  As 'minvec' is inclusive,
@@ -269,8 +306,8 @@ In this case the function could look like this:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
-				    FOO_DRIVER_MINIMUM_NVEC, nvec);
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+				     FOO_DRIVER_MINIMUM_NVEC, nvec);
 }
 
 4.3.1.2 Exact number of MSI-X interrupts
@@ -282,10 +319,15 @@ parameters:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
-				    nvec, nvec);
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+				     nvec, nvec);
 }
 
+Note, unlike pci_enable_msix_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msix_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msix_exact() does).
+
 4.3.1.3 Specific requirements to the number of MSI-X interrupts
 
 As noted above, there could be devices that can not operate with just any
@@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback -
 any error code other than -ENOSPC indicates a fatal error and should not
 be retried.
 
-4.3.2 pci_disable_msix
+4.3.2 pci_enable_msix_exact
+
+int pci_enable_msix_exact(struct pci_dev *dev,
+			  struct msix_entry *entries, int nvec)
+
+This variation on pci_enable_msix_range() call allows a device driver to
+request exactly 'nvec' MSI-Xs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.
+
+By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
+returns zero in case of success, which indicates MSI-X interrupts have been
+successfully allocated.
+
+Another version of a routine that enables MSI-X mode for a device with
+specific requirements described in chapter 4.3.1.3 might look like this:
+
+/*
+ * Assume 'minvec' and 'maxvec' are non-zero
+ */
+static int foo_driver_enable_msix(struct foo_adapter *adapter,
+				  int minvec, int maxvec)
+{
+	int rc;
+
+	minvec = roundup_pow_of_two(minvec);
+	maxvec = rounddown_pow_of_two(maxvec);
+
+	if (minvec > maxvec)
+		return -ERANGE;
+
+retry:
+	rc = pci_enable_msix_exact(adapter->pdev,
+				   adapter->msix_entries, maxvec);
+
+	/*
+	 * -ENOSPC is the only error code allowed to be analyzed
+	 */
+	if (rc == -ENOSPC) {
+		if (maxvec == 1)
+			return -ENOSPC;
+
+		maxvec /= 2;
+
+		if (minvec > maxvec)
+			return -ENOSPC;
+
+		goto retry;
+	} else if (rc < 0) {
+		return rc;
+	}
+
+	return maxvec;
+}
+
+4.3.3 pci_disable_msix
 
 void pci_disable_msix(struct pci_dev *dev)
 
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index e6b72d355151..68c0f517c60e 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
 Updating on-disk metadata
 -------------------------
 
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written.  If no such requests are made then commits will occur every
-second.  This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target).  If
-power is lost you may lose some recent writes.  The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
 
 The 'dirty' state for a cache block changes far too frequently for us
 to keep updating it on the fly.  So we treat it as a hint.  In normal
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 8a7a3d46e0da..05a27e9442bd 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
 userspace daemon can use this to detect a situation where a new table
 already exceeds the threshold.
 
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
 Thin provisioning
 -----------------
 
@@ -258,10 +287,9 @@ ii) Status
 	should register for the event and then check the target's status.
 
     held metadata root:
-	The location, in sectors, of the metadata root that has been
+	The location, in blocks, of the metadata root that has been
 	'held' for userspace read access.  '-' indicates there is no
-	held root.  This feature is not yet implemented so '-' is
-	always returned.
+	held root.
 
     discard_passdown|no_discard_passdown
 	Whether or not discards are actually being passed down to the
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 34dc40cffdfd..af9b4a0d902b 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -91,7 +91,7 @@ Boards:
   compatible = "ti,omap3-beagle", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index a6a352c2771e..5992dceec7af 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -21,9 +21,9 @@ Required Properties:
     must appear in the same order as the output clocks.
   - #clock-cells: Must be 1
   - clock-output-names: The name of the clocks as free-form strings
-  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
 
-The clocks, clock-output-names and renesas,indices properties contain one
+The clocks, clock-output-names and renesas,clock-indices properties contain one
 entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
 gate clocks must not be declared.
 
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 68b83ecc3850..ee9be9961524 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -1,12 +1,16 @@
 * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
 
 Required properties:
-- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
-  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
-  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
-  "fsl,imx6q-sdma". The -to variants should be preferred since they
-  allow to determnine the correct ROM script addresses needed for
-  the driver to work without additional firmware.
+- compatible : Should be one of
+      "fsl,imx25-sdma"
+      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+      "fsl,imx51-sdma"
+      "fsl,imx53-sdma"
+      "fsl,imx6q-sdma"
+  The -to variants should be preferred since they allow to determnine the
+  correct ROM script addresses needed for the driver to work without additional
+  firmware.
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
 - #dma-cells : Must be <3>.
diff --git a/Documentation/devicetree/bindings/net/opencores-ethoc.txt b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
new file mode 100644
index 000000000000..2dc127c30d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 000000000000..3dd3d0bf112f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+   "st,stid127-dwmac".
+ - reg		: Offset of the glue configuration register map in system
+   configuration regmap pointed by st,syscon property and size.
+
+ - reg-names	: Should be "sti-ethconf".
+
+ - st,syscon	: Should be phandle to system configuration node which
+   encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+   wired up in from different sources. One via TXCLK pin and other via CLK_125
+   pin. This wiring is totally board dependent. However the retiming glue
+   logic should be configured accordingly. Possible values for this property
+
+	   "txclk" - if 125Mhz clock is wired up via txclk line.
+	   "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+   This property is only valid for Giga bit setup( GMII, RGMII), and it is
+   un-used for non-giga bit (MII and RMII) setups. Also note that internal
+   clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+  for tx and rx. This property is only valid for RMII case where the clock can
+  be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+	device_type 	= "network";
+	compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
+	reg-names	= "stmmaceth", "sti-ethconf";
+	interrupts	= <0 133 0>, <0 134 0>, <0 135 0>;
+	interrupt-names	= "macirq", "eth_wake_irq", "eth_lpi";
+	phy-mode	= "mii";
+
+	st,syscon	= <&syscfg_rear>;
+
+	snps,pbl 	= <32>;
+	snps,mixed-burst;
+
+	resets		= <&softreset STIH416_ETH0_SOFTRESET>;
+	reset-names	= "stmmaceth";
+	pinctrl-0	= <&pinctrl_mii0>;
+	pinctrl-names 	= "default";
+	clocks		= <&CLK_S_GMAC0_PHY>;
+	clock-names	= "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index 9e9e9ef9f852..c119debe6bab 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node
diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt
deleted file mode 100644
index 72f38b13101d..000000000000
--- a/Documentation/networking/3c505.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-The 3Com Etherlink Plus (3c505) driver.
-
-This driver now uses DMA.  There is currently no support for PIO operation.
-The default DMA channel is 6; this is _not_ autoprobed, so you must
-make sure you configure it correctly.  If loading the driver as a
-module, you can do this with "modprobe 3c505 dma=n".  If the driver is
-linked statically into the kernel, you must either use an "ether="
-statement on the command line, or change the definition of ELP_DMA in 3c505.h.
-
-The driver will warn you if it has to fall back on the compiled in
-default DMA channel. 
-
-If no base address is given at boot time, the driver will autoprobe
-ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
-will try to probe for it.
-
-The driver can be used as a loadable module.
-
-Theoretically, one instance of the driver can now run multiple cards,
-in the standard way (when loading a module, say "modprobe 3c505
-io=0x300,0x340 irq=10,11 dma=6,7" or whatever).  I have not tested
-this, though.
-
-The driver may now support revision 2 hardware; the dependency on
-being able to read the host control register has been removed.  This
-is also untested, since I don't have a suitable card.
-
-Known problems:
- I still see "DMA upload timed out" messages from time to time.  These
-seem to be fairly non-fatal though.
- The card is old and slow.
-
-To do:
- Improve probe/setup code
- Test multicast and promiscuous operation
-
-Authors:
- The driver is mainly written by Craig Southeren, email
- <craigs@ineluki.apana.org.au>.
- Parts of the driver (adapting the driver to 1.1.4+ kernels,
- IRQ/address detection, some changes) and this README by
- Juha Laiho <jlaiho@ichaos.nullnet.fi>.
- DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
- Multicard support, Software configurable DMA, etc., by
- Christopher Collins <ccollins@pcug.org.au>
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index f3089d423515..0cbe6ec22d6f 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -554,12 +554,6 @@ solution for a couple of reasons:
   not specified in the struct can_frame and therefore it is only valid in
   CANFD_MTU sized CAN FD frames.
 
-  As long as the payload length is <=8 the received CAN frames from CAN FD
-  capable CAN devices can be received and read by legacy sockets too. When
-  user-generated CAN FD frames have a payload length <=8 these can be send
-  by legacy CAN network interfaces too. Sending CAN FD frames with payload
-  length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
-
   Implementation hint for new CAN applications:
 
   To build a CAN FD aware application use struct canfd_frame as basic CAN