diff options
| author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-16 16:56:35 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-16 16:56:35 -0700 |
| commit | 2b0460b534f383eca744eb8fff66ec9f57e702b9 (patch) | |
| tree | 1bf4b9d0ebccd3083da4de7e4273b8d29f5d5c5d /Documentation/ide.txt | |
| parent | d91f5bb69adde86173071cf7fffbdf705ae8c6e7 (diff) | |
| parent | b02fcae007ac64012806bc57054e7fee6e2ffe5e (diff) | |
Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
amd74xx: remove /proc/ide/amd74xx
amd74xx/via82cxxx: don't initialize drive->dn
sis5513: remove /proc/ide/sis
ide: remove CONFIG_IDEDMA_ONLYDISK
ide: add "hdx=nodma" kernel parameter
ide: remove hwif->autodma and drive->autodma
ide: remove "idex=dma" kernel parameter
ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
ide: use PCI_VDEVICE() macro
sis5513: clear prefetch and postwrite for ATAPI devices
it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
ide: unexport noautodma
ide: unexport ide_tune_dma
ide: remove ->ide_dma_check (take 2)
ide-pmac: add PIO autotune fallback to ->ide_dma_check
ide-cris: add PIO autotune fallback to ->ide_dma_check
sl82c105: add PIO autotune fallback to ->ide_dma_check
cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
ide: remove ide_use_fast_pio()
ide: remove drive->init_speed zeroing
...
Diffstat (limited to 'Documentation/ide.txt')
| -rw-r--r-- | Documentation/ide.txt | 6 |
1 files changed, 2 insertions, 4 deletions
diff --git a/Documentation/ide.txt b/Documentation/ide.txt index 3bb9f9c98611..1d50f23a5cab 100644 --- a/Documentation/ide.txt +++ b/Documentation/ide.txt @@ -242,6 +242,8 @@ Summary of ide driver parameters for kernel command line and quite likely to cause trouble with older/odd IDE drives. + "hdx=nodma" : disallow DMA + "hdx=swapdata" : when the drive is a disk, byte swap all data "hdx=bswap" : same as above.......... @@ -278,8 +280,6 @@ Summary of ide driver parameters for kernel command line "idex=four" : four drives on idex and ide(x^1) share same ports "idex=reset" : reset interface after probe - - "idex=dma" : automatically configure/use DMA if possible. "idex=ata66" : informs the interface that it has an 80c cable for chipsets that are ATA-66 capable, but the @@ -288,8 +288,6 @@ Summary of ide driver parameters for kernel command line "ide=reverse" : formerly called to pci sub-system, but now local. - "ide=nodma" : disable DMA globally for the IDE subsystem. - The following are valid ONLY on ide0, which usually corresponds to the first ATA interface found on the particular host, and the defaults for the base,ctl ports must not be altered. |