Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "We've received a fairly wide range of changes at this time, including
  for ALSA and ASoC core, but all of them are rather small changes.

  Here are some highlights:

  ALSA / ASoC Core:
   - Fixes of inconsistent locking around control API helpers
   - A few new control API functions and cleanups
   - Workarounds for potential UAFs by delayed kobj releases
   - Unified PCM copy ops with iov_iter
   - Continued efforts for ASoC API cleanups

  ASoC:
   - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
     some IIO changes
   - Create a library function for intlog10() and use it in the NAU8825
     driver
   - Convert drivers to use the more modern maple tree register cache
   - Lots of work on the SOF framework, AMD and Intel drivers, including
     a lot of cleanup and new device support
   - Standardization of the presentation of jacks from drivers
   - Provision of some generic sound card DT properties
   - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
     AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
     platforms including AVS machines with ES8336 and RT5663, Mediatek
     MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110

  Others:
   - New test coverage including ASoC and topology tests in KUnit; this
     also involves enabling UML builds of ALSA since that's the default
     KUnit test environment which pulls in the addition of some stubs to
     the driver
   - More enhancement of pcmtest driver
   - A few fixes / enhancements of MIDI 2.0 UMP core
   - Using PCI definitions in allover HD-audio code
   - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
   - CS35L41 HD-audio sub-codec improvements
   - Continued emu10k1 improvements"

* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
  ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
  ASoC: dwc: i2s: Fix unused functions
  ALSA: usb-audio: Don't try to submit URBs after disconnection
  ALSA: emu10k1: add separate documentation for E-MU cards
  ALSA: emu10k1: more documentation updates
  ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
  ALSA: ump: Fix -Wformat-truncation warnings
  ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
  ALSA: doc: Fix missing backquote in midi-2.0.rst
  ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
  ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
  ASoC: soc-core.c: Do not error if a DAI link component is not found
  ASoC: codecs: Fix error code in aw88261_i2c_probe()
  ASoC: audio-graph-card.c: move audio_graph_parse_of()
  ASoC: cs42l43: Use new-style PM runtime macros
  ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
  ALSA: ump: Don't create unused substreams for static blocks
  ALSA: ump: Fill group names for legacy rawmidi substreams
  ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
  ALSA: ac97: Fix possible error value of *rac97
  ...

32 files changed, 1110 insertions, 404 deletions

diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
index bf1234550343..5db718e4d0e7 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -9,6 +9,9 @@ title: Amlogic AXG sound card
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     const: amlogic,axg-sound-card
@@ -17,23 +20,12 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: list of auxiliary devices
 
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    description:
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source.
-
   audio-widgets:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     description:
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object
@@ -108,7 +100,6 @@ patternProperties:
       - sound-dai
 
 required:
-  - model
   - dai-link-0
 
 unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index b358fd601ed3..d4277d342e69 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -9,6 +9,9 @@ title: Amlogic GX sound card
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     items:
@@ -18,14 +21,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: list of auxiliary devices
 
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    minItems: 2
-    description: |-
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source.
-
   audio-widgets:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     minItems: 2
@@ -33,10 +28,6 @@ properties:
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object
@@ -86,7 +77,7 @@ required:
   - model
   - dai-link-0
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml
new file mode 100644
index 000000000000..d3cc1ea4a175
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-iio-aux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio IIO auxiliary
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  Auxiliary device based on Industrial I/O device channels
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: audio-iio-aux
+
+  io-channels:
+    description:
+      Industrial I/O device channels used
+
+  io-channel-names:
+    description:
+      Industrial I/O channel names related to io-channels.
+      These names are used to provides sound controls, widgets and routes names.
+
+  snd-control-invert-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      A list of 0/1 flags defining whether or not the related channel is
+      inverted
+    items:
+      enum: [0, 1]
+      default: 0
+      description: |
+        Invert the sound control value compared to the IIO channel raw value.
+          - 1: The related sound control value is inverted meaning that the
+               minimum sound control value correspond to the maximum IIO channel
+               raw value and the maximum sound control value correspond to the
+               minimum IIO channel raw value.
+          - 0: The related sound control value is not inverted meaning that the
+               minimum (resp maximum) sound control value correspond to the
+               minimum (resp maximum) IIO channel raw value.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    iio-aux {
+        compatible = "audio-iio-aux";
+        io-channels = <&iio 0>, <&iio 1>, <&iio 2>, <&iio 3>;
+        io-channel-names = "CH0", "CH1", "CH2", "CH3";
+        /* Invert CH1 and CH2 */
+        snd-control-invert-range = <0 1 1 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
index 35eef7d818a2..4051c2538caf 100644
--- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
+++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
@@ -19,7 +19,9 @@ allOf:
 
 properties:
   compatible:
-    const: awinic,aw88395
+    enum:
+      - awinic,aw88395
+      - awinic,aw88261
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
index e847611a85f7..188f38baddec 100644
--- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -17,6 +17,9 @@ description: |
   such as SAI, MICFIL, .etc through building rpmsg channels between
   Cortex-A and Cortex-M.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,10 +28,7 @@ properties:
       - fsl,imx8mm-rpmsg-audio
       - fsl,imx8mp-rpmsg-audio
       - fsl,imx8ulp-rpmsg-audio
-
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
+      - fsl,imx93-rpmsg-audio
 
   clocks:
     items:
@@ -65,13 +65,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle to a node of audio codec
 
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    description: |
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source.
-
   fsl,enable-lpa:
     $ref: /schemas/types.yaml#/definitions/flag
     description: enable low power audio path.
@@ -100,9 +93,8 @@ properties:
 
 required:
   - compatible
-  - model
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
index ba5b7728cf33..bac940553965 100644
--- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -13,23 +13,15 @@ maintainers:
 description:
   This binding describes the SC7180 sound card which uses LPASS for audio.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
       - google,sc7180-trogdor
       - google,sc7180-coachz
 
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    description:
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source.
-
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
   "#address-cells":
     const: 1
 
@@ -86,11 +78,10 @@ patternProperties:
 
 required:
   - compatible
-  - model
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
 
diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
index 0b1a01a4c14e..ec4b6e547ca6 100644
--- a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
+++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
@@ -13,22 +13,14 @@ maintainers:
 description:
   This binding describes the SC7280 sound card which uses LPASS for audio.
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
       - google,sc7280-herobrine
 
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    description:
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source.
-
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
   "#address-cells":
     const: 1
 
@@ -97,11 +89,10 @@ patternProperties:
 
 required:
   - compatible
-  - model
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
 
diff --git a/Documentation/devicetree/bindings/sound/gtm601.txt b/Documentation/devicetree/bindings/sound/gtm601.txt
deleted file mode 100644
index efa32a486c4a..000000000000
--- a/Documentation/devicetree/bindings/sound/gtm601.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-GTM601 UMTS modem audio interface CODEC
-
-This device has no configuration interface. The sample rate and channels are
-based on the compatible string
-	"option,gtm601" = 8kHz mono
-	"broadmobi,bm818" = 48KHz stereo
-
-Required properties:
-
-  - compatible : one of
-	"option,gtm601"
-	"broadmobi,bm818"
-
-
-Example:
-
-codec: gtm601_codec {
-	compatible = "option,gtm601";
-};
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
index b6f5d486600e..f7ad5ea2491e 100644
--- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
+++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
@@ -9,23 +9,14 @@ title: NXP i.MX audio sound card.
 maintainers:
   - Shengjiu Wang <shengjiu.wang@nxp.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
       - fsl,imx-audio-card
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
-  audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
-    description:
-      A list of the connections between audio components. Each entry is a
-      pair of strings, the first being the connection's sink, the second
-      being the connection's source. Valid names could be power supplies,
-      MicBias of codec and the jacks on the board.
-
 patternProperties:
   ".*-dai-link$":
     description:
@@ -84,9 +75,8 @@ patternProperties:
 
 required:
   - compatible
-  - model
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/max9892x.txt b/Documentation/devicetree/bindings/sound/max9892x.txt
deleted file mode 100644
index 98cb9ba5b328..000000000000
--- a/Documentation/devicetree/bindings/sound/max9892x.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier
-
-This device supports I2C.
-
-Required properties:
-
-  - compatible : should be one of the following
-    - "maxim,max98925"
-    - "maxim,max98926"
-    - "maxim,max98927"
-
-  - vmon-slot-no : slot number used to send voltage information
-                   or in inteleave mode this will be used as
-                   interleave slot.
-                   MAX98925/MAX98926 slot range : 0 ~ 30,  Default : 0
-                   MAX98927 slot range : 0 ~ 15,  Default : 0
-
-  - imon-slot-no : slot number used to send current information
-                   MAX98925/MAX98926 slot range : 0 ~ 30,  Default : 0
-                   MAX98927 slot range : 0 ~ 15,  Default : 0
-
-  - interleave-mode : When using two MAX9892X in a system it is
-                   possible to create ADC data that that will
-                   overflow the frame size. Digital Audio Interleave
-                   mode provides a means to output VMON and IMON data
-                   from two devices on a single DOUT line when running
-                   smaller frames sizes such as 32 BCLKS per LRCLK or
-                   48 BCLKS per LRCLK.
-                   Range : 0 (off), 1 (on),  Default : 0
-
-  - reg : the I2C address of the device for I2C
-
-Optional properties:
-  - reset-gpios : GPIO to reset the device
-
-Example:
-
-codec: max98927@3a {
-   compatible = "maxim,max98927";
-   vmon-slot-no = <0>;
-   imon-slot-no = <1>;
-   interleave-mode = <0>;
-   reg = <0x3a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98925.yaml b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
new file mode 100644
index 000000000000..32fd86204a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@maximintegrated.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98925
+      - maxim,max98926
+      - maxim,max98927
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send voltage information or in inteleave mode this
+      will be used as interleave slot.
+
+  imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send current information.
+
+  maxim,interleave-mode:
+    type: boolean
+    description:
+      When using two MAX9892X in a system it is possible to create ADC data
+      that will overflow the frame size. When enabled, the Digital Audio
+      Interleave mode provides a means to output VMON and IMON data from two
+      devices on a single DOUT line when running smaller frames sizes such as
+      32 BCLKS per LRCLK or 48 BCLKS per LRCLK.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max98927
+    then:
+      properties:
+        vmon-slot-no:
+          minimum: 0
+          maximum: 15
+
+        imon-slot-no:
+          minimum: 0
+          maximum: 15
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        #include <dt-bindings/gpio/gpio.h>
+        audio-codec@3a {
+            compatible = "maxim,max98927";
+            reg = <0x3a>;
+            #sound-dai-cells = <0>;
+
+            pinctrl-0 = <&speaker_default>;
+            pinctrl-names = "default";
+
+            reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+            vmon-slot-no = <1>;
+            imon-slot-no = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
new file mode 100644
index 000000000000..398efdfe00f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AFE PCM controller for MT7986
+
+maintainers:
+  - Maso Huang <maso.huang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt7986-afe
+      - items:
+          - enum:
+              - mediatek,mt7981-afe
+              - mediatek,mt7988-afe
+          - const: mediatek,mt7986-afe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    items:
+      - description: audio bus clock
+      - description: audio 26M clock
+      - description: audio intbus clock
+      - description: audio hopping clock
+      - description: audio pll clock
+      - description: mux for pcm_mck
+      - description: audio i2s/pcm mck
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: bus_ck
+      - const: 26m_ck
+      - const: l_ck
+      - const: aud_ck
+      - const: eg2_ck
+      - const: sel
+      - const: i2s_m
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7981-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+            - description: mux for pcm_mck
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+            - const: sel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7988-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+            - description: mux for pcm_mck
+            - description: audio i2s/pcm mck
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+            - const: sel
+            - const: i2s_m
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7986-clk.h>
+
+    afe@11210000 {
+        compatible = "mediatek,mt7986-afe";
+        reg = <0x11210000 0x9000>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_26M_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_L_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_AUD_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_EG2_CK>;
+        clock-names = "bus_ck",
+                      "26m_ck",
+                      "l_ck",
+                      "aud_ck",
+                      "eg2_ck";
+        assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>,
+                          <&topckgen CLK_TOP_AUD_L_SEL>,
+                          <&topckgen CLK_TOP_A_TUNER_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>,
+                                 <&apmixedsys CLK_APMIXED_APLL2>,
+                                 <&topckgen CLK_TOP_APLL2_D4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
new file mode 100644
index 000000000000..09247ceea3f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7986 sound card with WM8960 codec
+
+maintainers:
+  - Maso Huang <maso.huang@mediatek.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7986-wm8960-sound
+
+  platform:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: The phandle of MT7986 platform.
+        maxItems: 1
+    required:
+      - sound-dai
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: The phandle of wm8960 codec.
+        maxItems: 1
+    required:
+      - sound-dai
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - audio-routing
+  - platform
+  - codec
+
+examples:
+  - |
+    sound {
+        compatible = "mediatek,mt7986-wm8960-sound";
+        model = "mt7986-wm8960";
+        audio-routing =
+            "Headphone", "HP_L",
+            "Headphone", "HP_R",
+            "LINPUT1", "AMIC",
+            "RINPUT1", "AMIC";
+
+        platform {
+            sound-dai = <&afe>;
+        };
+
+        codec {
+            sound-dai = <&wm8960>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
index e6cb711ece77..0b92c71d8779 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
@@ -25,6 +25,12 @@ properties:
   reset-names:
     const: audiosys
 
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.yaml for details.
+
   mediatek,topckgen:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of the mediatek topckgen controller
@@ -176,6 +182,7 @@ examples:
         interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
         resets = <&watchdog 14>;
         reset-names = "audiosys";
+        memory-region = <&snd_dma_mem_reserved>;
         mediatek,topckgen = <&topckgen>;
         mediatek,infracfg = <&infracfg_ao>;
         power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 05e532b5d50a..43b3b67bdf3b 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -9,23 +9,19 @@ title: MediaTek MT8188 ASoC sound card
 maintainers:
   - Trevor Wu <trevor.wu@mediatek.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
       - mediatek,mt8188-mt6359-evb
       - mediatek,mt8188-nau8825
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: User specified audio sound card name
-
   audio-routing:
-    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     description:
-      A list of the connections between audio components. Each entry is a
-      sink/source pair of strings. Valid names could be the input or output
-      widgets of audio components, power supplies, MicBias of codec and the
-      software switch.
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
 
   mediatek,platform:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -86,7 +82,7 @@ patternProperties:
     required:
       - link-name
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -96,6 +92,7 @@ examples:
   - |
     sound {
         compatible = "mediatek,mt8188-mt6359-evb";
+        model = "MT6359-EVB";
         mediatek,platform = <&afe>;
         pinctrl-names = "default";
         pinctrl-0 = <&aud_pins_default>;
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt
deleted file mode 100644
index 7c84e7c7327a..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8821.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Nuvoton NAU88L21 audio codec
-
-This device supports I2C only.
-
-Required properties:
-  - compatible : Must be "nuvoton,nau8821"
-
-  - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1).
-
-Optional properties:
-  - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
-  - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
-      otherwise pin in high impedance state.
-  - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
-  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
-
-  - nuvoton,vref-impedance: VREF Impedance selection
-      0 - Open
-      1 - 25 kOhm
-      2 - 125 kOhm
-      3 - 2.5 kOhm
-
-  - nuvoton,micbias-voltage: Micbias voltage level.
-      0 - VDDA
-      1 - VDDA
-      2 - VDDA * 1.1
-      3 - VDDA * 1.2
-      4 - VDDA * 1.3
-      5 - VDDA * 1.4
-      6 - VDDA * 1.53
-      7 - VDDA * 1.53
-
-  - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
-  - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
-
-  - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
-  - nuvoton,key_enable: Headset button detection switch.
-
-Example:
-
-  headset: nau8821@1b {
-      compatible = "nuvoton,nau8821";
-      reg = <0x1b>;
-      interrupt-parent = <&gpio>;
-      interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-      nuvoton,jkdet-enable;
-      nuvoton,jkdet-pull-enable;
-      nuvoton,jkdet-pull-up;
-      nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
-      nuvoton,vref-impedance = <2>;
-      nuvoton,micbias-voltage = <6>;
-      nuvoton,jack-insert-debounce = <7>;
-      nuvoton,jack-eject-debounce = <7>;
-      nuvoton,dmic-clk-threshold = 3072000;
-  };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
new file mode 100644
index 000000000000..3e54abd4ca74
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU88L21 audio codec
+
+maintainers:
+  - Seven Lee <wtli@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8821
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-enable:
+    description: Enable jack detection via JKDET pin.
+    type: boolean
+
+  nuvoton,jkdet-pull-enable:
+    description: Enable JKDET pin pull. If set - pin pull enabled,
+      otherwise pin in high impedance state.
+    type: boolean
+
+  nuvoton,jkdet-pull-up:
+    description: Pull-up JKDET pin. If set then JKDET pin is pull up,
+      otherwise pull down.
+    type: boolean
+
+  nuvoton,key-enable:
+    description: handles key press detection.
+    type: boolean
+
+  nuvoton,jkdet-polarity:
+    description: JKDET pin polarity.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,micbias-voltage:
+    description: MICBIAS output level select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA * 1
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,vref-impedance:
+    description: VMID Tie-off impedance select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # open
+      - 1 # 25KOhms
+      - 2 # 125KOhms
+      - 3 # 2.5KOhms
+    default: 2
+
+  nuvoton,jack-insert-debounce:
+    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 7
+
+  nuvoton,jack-eject-debounce:
+    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
+  nuvoton,dmic-clk-threshold:
+    description: DMIC clock speed expected value. Unit is Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3072000
+
+  nuvoton,left-input-single-end:
+    description: Enable left input with single-ended settings if set.
+        For the headset mic application, the single-ended control is
+        just limited to the left adc for design demand.
+    type: boolean
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1b {
+            compatible = "nuvoton,nau8821";
+            reg = <0x1b>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,jkdet-enable;
+            nuvoton,jkdet-pull-enable;
+            nuvoton,jkdet-pull-up;
+            nuvoton,key-enable;
+            nuvoton,left-input-single-end;
+            nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+            nuvoton,micbias-voltage = <6>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,jack-insert-debounce = <7>;
+            nuvoton,jack-eject-debounce = <0>;
+            nuvoton,dmic-clk-threshold = <3072000>;
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml
index 65105402a53d..cb8182bbc491 100644
--- a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml
@@ -21,6 +21,15 @@ properties:
   reg:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
   nuvoton,spk-btl:
     description:
       If set, configure the two loudspeaker outputs as a Bridge Tied Load output
@@ -31,6 +40,9 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: dai-common.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/sound/option,gtm601.yaml b/Documentation/devicetree/bindings/sound/option,gtm601.yaml
new file mode 100644
index 000000000000..ff813d97fc59
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/option,gtm601.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/option,gtm601.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GTM601 UMTS modem audio interface CODEC
+
+maintainers:
+  - kernel@puri.sm
+
+description: >
+  This device has no configuration interface. The sample rate and channels are
+  based on the compatible string
+
+properties:
+  compatible:
+    oneOf:
+      - description: Broadmobi BM818 (48Khz stereo)
+        items:
+          - const: broadmobi,bm818
+          - const: option,gtm601
+      - description: GTM601 (8kHz mono)
+        const: option,gtm601
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+
+allOf:
+  - $ref: dai-common.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        compatible = "option,gtm601";
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
deleted file mode 100644
index e7d17dda55db..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-msm8916 analog audio CODEC
-
-Bindings for codec Analog IP which is integrated in pmic pm8916,
-
-## Bindings for codec core on pmic:
-
-Required properties
- - compatible = "qcom,pm8916-wcd-analog-codec";
- - reg: represents the slave base address provided to the peripheral.
- - interrupts: List of interrupts in given SPMI peripheral.
- - interrupt-names: Names specified to above list of interrupts in same
-		    order. List of supported interrupt names are:
-  "cdc_spk_cnp_int" - Speaker click and pop interrupt.
-  "cdc_spk_clip_int" - Speaker clip interrupt.
-  "cdc_spk_ocp_int" - Speaker over current protect interrupt.
-  "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
-  "mbhc_but_rel_det" - button release interrupt.
-  "mbhc_but_press_det" - button press event
-  "mbhc_ins_rem_det" - jack insert removal detect interrupt.
-  "mbhc_switch_int"	- multi button headset interrupt.
-  "cdc_ear_ocp_int" - Earphone over current protect interrupt.
-  "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
-  "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
-  "cdc_ear_cnp_int" - earphone cnp interrupt.
-  "cdc_hphr_cnp_int" - hphr click and pop interrupt.
-  "cdc_hphl_cnp_int" - hphl click and pop interrupt.
-
- - clocks: Handle to mclk.
- - clock-names: should be "mclk"
- - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
- - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
- - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
-
-Optional Properties:
- - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons
-			     detection on headset when the mbhc is powered up
-			     by internal current source, this is a low power.
- - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons
-			      detection on headset when mbhc is powered up
-			       from micbias.
-- qcom,micbias-lvl:  Voltage (mV) for Mic Bias
-- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a
-				     NO (Normally Open). If not specified, then
-				     its assumed that hphl pin on jack is NC
-				     (Normally Closed).
-- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is
-				    NO (Normally Open). If not specified, then
-				    its assumed that gnd pin on jack is NC
-				    (Normally Closed).
-- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
-			 connected.
-- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
-			 connected.
-
-Example:
-
-spmi_bus {
-	...
-	audio-codec@f000{
-		compatible = "qcom,pm8916-wcd-analog-codec";
-		reg = <0xf000 0x200>;
-		reg-names = "pmic-codec-core";
-		clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-		clock-names = "mclk";
-		qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-		qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-		interrupt-parent = <&spmi_bus>;
-		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
-			     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
-			     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
-		interrupt-names = "cdc_spk_cnp_int",
-				  "cdc_spk_clip_int",
-				  "cdc_spk_ocp_int",
-				  "mbhc_ins_rem_det1",
-				  "mbhc_but_rel_det",
-				  "mbhc_but_press_det",
-				  "mbhc_ins_rem_det",
-				  "mbhc_switch_int",
-				  "cdc_ear_ocp_int",
-				  "cdc_hphr_ocp_int",
-				  "cdc_hphl_ocp_det",
-				  "cdc_ear_cnp_int",
-				  "cdc_hphr_cnp_int",
-				  "cdc_hphl_cnp_int";
-	               vdd-cdc-io-supply = <&pm8916_l5>;
-	               vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
-	               vdd-micbias-supply = <&pm8916_l13>;
-	               #sound-dai-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
new file mode 100644
index 000000000000..94e7a1860977
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 WCD Analog Audio Codec
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The analog WCD audio codec found on Qualcomm PM8916 PMIC.
+
+properties:
+  compatible:
+    const: qcom,pm8916-wcd-analog-codec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: cdc_spk_cnp_int
+      - const: cdc_spk_clip_int
+      - const: cdc_spk_ocp_int
+      - const: mbhc_ins_rem_det1
+      - const: mbhc_but_rel_det
+      - const: mbhc_but_press_det
+      - const: mbhc_ins_rem_det
+      - const: mbhc_switch_int
+      - const: cdc_ear_ocp_int
+      - const: cdc_hphr_ocp_int
+      - const: cdc_hphl_ocp_det
+      - const: cdc_ear_cnp_int
+      - const: cdc_hphr_cnp_int
+      - const: cdc_hphl_cnp_int
+
+  vdd-cdc-io-supply:
+    description: 1.8V buck supply
+
+  vdd-cdc-tx-rx-cx-supply:
+    description: 1.8V SIDO buck supply
+
+  vdd-micbias-supply:
+    description: micbias supply
+
+  qcom,mbhc-vthreshold-low:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Array of 5 threshold voltages in mV for 5-button detection on
+      headset when MBHC is powered by an internal current source.
+    minItems: 5
+    maxItems: 5
+
+  qcom,mbhc-vthreshold-high:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Array of 5 threshold voltages in mV for 5-button detection on
+      headset when MBHC is powered from micbias.
+    minItems: 5
+    maxItems: 5
+
+  qcom,micbias-lvl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Voltage (mV) for Mic Bias
+
+  qcom,hphl-jack-type-normally-open:
+    type: boolean
+    description:
+      True if the HPHL pin on the jack is NO (Normally Open), false if it's
+      NC (Normally Closed).
+
+  qcom,gnd-jack-type-normally-open:
+    type: boolean
+    description:
+      True if the GND pin on the jack is NO (Normally Open), false if it's
+      NC (Normally Closed).
+
+  qcom,micbias1-ext-cap:
+    type: boolean
+    description:
+      True if micbias1 has an external capacitor.
+
+  qcom,micbias2-ext-cap:
+    type: boolean
+    description:
+      True if micbias2 has an external capacitor.
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@1 {
+      compatible = "qcom,pm8916", "qcom,spmi-pmic";
+      reg = <0x1 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      audio-codec@f000 {
+        compatible = "qcom,pm8916-wcd-analog-codec";
+        reg = <0xf000>;
+        qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+        qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+        interrupt-parent = <&spmi_bus>;
+        interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+        interrupt-names = "cdc_spk_cnp_int",
+                          "cdc_spk_clip_int",
+                          "cdc_spk_ocp_int",
+                          "mbhc_ins_rem_det1",
+                          "mbhc_but_rel_det",
+                          "mbhc_but_press_det",
+                          "mbhc_ins_rem_det",
+                          "mbhc_switch_int",
+                          "cdc_ear_ocp_int",
+                          "cdc_hphr_ocp_int",
+                          "cdc_hphl_ocp_det",
+                          "cdc_ear_cnp_int",
+                          "cdc_hphr_cnp_int",
+                          "cdc_hphl_cnp_int";
+        vdd-cdc-io-supply = <&pm8916_l5>;
+        vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+        vdd-micbias-supply = <&pm8916_l13>;
+        #sound-dai-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 8a821dec9526..13a5a0a10fe6 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -9,6 +9,20 @@ title: Renesas R-Car Sound Driver
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
+definitions:
+  port-def:
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
+
 properties:
 
   compatible:
@@ -77,6 +91,12 @@ properties:
       it must be 1 if your system has audio_clkout0/1/2/3
     enum: [0, 1]
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
   clock-frequency:
     description: for audio_clkout0/1/2/3
 
@@ -103,35 +123,9 @@ properties:
     description: List of necessary clock names.
     # details are defined below
 
-  ports:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      '^port(@[0-9a-f]+)?$':
-        $ref: audio-graph-port.yaml#/definitions/port-base
-        unevaluatedProperties: false
-        patternProperties:
-          "^endpoint(@[0-9a-f]+)?":
-            $ref: audio-graph-port.yaml#/definitions/endpoint-base
-            properties:
-              playback:
-                $ref: /schemas/types.yaml#/definitions/phandle-array
-              capture:
-                $ref: /schemas/types.yaml#/definitions/phandle-array
-            unevaluatedProperties: false
-
+  # ports is below
   port:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        $ref: audio-graph-port.yaml#/definitions/endpoint-base
-        properties:
-          playback:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-          capture:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-        unevaluatedProperties: false
+    $ref: "#/definitions/port-def"
 
   rcar_sound,dvc:
     description: DVC subnode.
@@ -248,8 +242,9 @@ properties:
           - interrupts
     additionalProperties: false
 
+patternProperties:
   # For DAI base
-  rcar_sound,dai:
+  'rcar_sound,dai(@[0-9a-f]+)?$':
     description: DAI subnode.
     type: object
     patternProperties:
@@ -269,6 +264,13 @@ properties:
               - capture
     additionalProperties: false
 
+  'ports(@[0-9a-f]+)?$':
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      '^port(@[0-9a-f]+)?$':
+        $ref: "#/definitions/port-def"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
index 447e013f6e17..5ea0819a261a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -9,6 +9,9 @@ title: Samsung Aries audio complex with WM8994 codec
 maintainers:
   - Jonathan Bakker <xc-racer2@live.ca>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     enum:
@@ -17,10 +20,6 @@ properties:
       # Without FM radio and modem slave
       - samsung,fascinate4g-wm8994
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: The user-visible name of this sound complex.
-
   cpu:
     type: object
     additionalProperties: false
@@ -46,6 +45,7 @@ properties:
 
   samsung,audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    deprecated: true
     description: |
       List of the connections between audio
       components;  each entry is a pair of strings, the first being the
@@ -56,6 +56,7 @@ properties:
       or FM In
       For samsung,fascinate4g-wm8994: HP, SPK, RCV, LINE, Main Mic,
       or HeadsetMic
+      Deprecated, use audio-routing.
 
   extcon:
     description: Extcon phandle for dock detection
@@ -87,10 +88,9 @@ properties:
 
 required:
   - compatible
-  - model
   - cpu
   - codec
-  - samsung,audio-routing
+  - audio-routing
   - extcon
   - main-micbias-supply
   - headset-micbias-supply
@@ -98,7 +98,7 @@ required:
   - headset-detect-gpios
   - headset-key-gpios
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -121,7 +121,7 @@ examples:
         headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
         headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
 
-        samsung,audio-routing =
+        audio-routing =
             "HP", "HPOUT1L",
             "HP", "HPOUT1R",
 
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 31095913e330..6ec80f529d84 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -9,14 +9,13 @@ title: Samsung Midas audio complex with WM1811 codec
 maintainers:
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     const: samsung,midas-audio
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: The user-visible name of this sound complex.
-
   cpu:
     type: object
     additionalProperties: false
@@ -38,6 +37,7 @@ properties:
       - sound-dai
 
   samsung,audio-routing:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     description: |
       List of the connections between audio components; each entry is
@@ -45,6 +45,7 @@ properties:
       being the connection's source; valid names for sources and sinks are
       the WM1811's pins (as documented in its binding), and the jacks
       on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic.
+      Deprecated, use audio-routing.
 
   mic-bias-supply:
     description: Supply for the micbias on the Main microphone
@@ -62,14 +63,13 @@ properties:
 
 required:
   - compatible
-  - model
   - cpu
   - codec
-  - samsung,audio-routing
+  - audio-routing
   - mic-bias-supply
   - submic-bias-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -84,7 +84,7 @@ examples:
         mic-bias-supply = <&mic_bias_reg>;
         submic-bias-supply = <&submic_bias_reg>;
 
-        samsung,audio-routing =
+        audio-routing =
                 "HP", "HPOUT1L",
                 "HP", "HPOUT1R",
 
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index c6751c40e63f..b77284e3e26a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -24,10 +27,6 @@ properties:
       - const: samsung,odroid-xu4-audio
         deprecated: true
 
-  model:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: The user-visible name of this sound complex.
-
   assigned-clock-parents: true
   assigned-clock-rates: true
   assigned-clocks: true
@@ -52,6 +51,7 @@ properties:
 
   samsung,audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    deprecated: true
     description: |
       List of the connections between audio
       components;  each entry is a pair of strings, the first being the
@@ -61,6 +61,7 @@ properties:
       For Odroid X2: "Headphone Jack", "Mic Jack", "DMIC"
       For Odroid U3, XU3: "Headphone Jack", "Speakers"
       For Odroid XU4: no entries
+      Deprecated, use audio-routing.
 
   samsung,audio-widgets:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
@@ -70,18 +71,17 @@ properties:
 
 required:
   - compatible
-  - model
   - cpu
   - codec
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     sound {
         compatible = "hardkernel,odroid-xu3-audio";
         model = "Odroid-XU3";
-        samsung,audio-routing =
+        audio-routing =
                 "Headphone Jack", "HPL",
                 "Headphone Jack", "HPR",
                 "IN1", "Mic Jack",
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
index 491e08019c04..760592599143 100644
--- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
 
+allOf:
+  - $ref: sound-card-common.yaml#
+
 properties:
   compatible:
     const: samsung,tm2-audio
@@ -32,6 +35,8 @@ properties:
       being the connection's source; valid names for sources and sinks are the
       WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main
       Mic, Sub Mic, Third Mic, Headset Mic.
+      Deprecated, use audio-routing.
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
 
   i2s-controller:
@@ -44,20 +49,15 @@ properties:
   mic-bias-gpios:
     description: GPIO pin that enables the Main Mic bias regulator.
 
-  model:
-    description: The user-visible name of this sound complex.
-    $ref: /schemas/types.yaml#/definitions/string
-
 required:
   - compatible
   - audio-amplifier
   - audio-codec
-  - samsung,audio-routing
+  - audio-routing
   - i2s-controller
   - mic-bias-gpios
-  - model
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -70,7 +70,7 @@ examples:
         audio-amplifier = <&max98504>;
         mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
         model = "wm5110";
-        samsung,audio-routing = "HP", "HPOUT1L",
+        audio-routing = "HP", "HPOUT1L",
                                 "HP", "HPOUT1R",
                                 "SPK", "SPKOUT",
                                 "SPKOUT", "HPOUT2L",
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index b05e05c81cc4..59ac2d1d1ccf 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -148,6 +148,15 @@ definitions:
     required:
       - sound-dai
 
+  additional-devs:
+    type: object
+    description:
+      Additional devices used by the simple audio card.
+    patternProperties:
+      '^iio-aux(-.+)?$':
+        type: object
+        $ref: audio-iio-aux.yaml#
+
 properties:
   compatible:
     contains:
@@ -187,6 +196,8 @@ properties:
     $ref: "#/definitions/mclk-fs"
   simple-audio-card,aux-devs:
     $ref: "#/definitions/aux-devs"
+  simple-audio-card,additional-devs:
+    $ref: "#/definitions/additional-devs"
   simple-audio-card,convert-rate:
     $ref: "#/definitions/convert-rate"
   simple-audio-card,convert-channels:
@@ -360,6 +371,48 @@ examples:
     };
 
 # --------------------
+# route audio to/from a codec through an amplifier
+# designed with a potentiometer driven by IIO:
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,aux-devs = <&amp_in>, <&amp_out>;
+        simple-audio-card,routing =
+            "CODEC LEFTIN", "AMP_IN LEFT OUT",
+            "CODEC RIGHTIN", "AMP_IN RIGHT OUT",
+            "AMP_OUT LEFT IN", "CODEC LEFTOUT",
+            "AMP_OUT RIGHT IN", "CODEC RIGHTOUT";
+
+        simple-audio-card,additional-devs {
+            amp_out: iio-aux-out {
+                compatible = "audio-iio-aux";
+                io-channels = <&pot_out 0>, <&pot_out 1>;
+                io-channel-names = "LEFT", "RIGHT";
+                snd-control-invert-range = <1 1>;
+                sound-name-prefix = "AMP_OUT";
+            };
+
+            amp_in: iio_aux-in {
+                compatible = "audio-iio-aux";
+                io-channels = <&pot_in 0>, <&pot_in 1>;
+                io-channel-names = "LEFT", "RIGHT";
+                sound-name-prefix = "AMP_IN";
+            };
+        };
+
+        simple-audio-card,cpu {
+            sound-dai = <&cpu>;
+        };
+
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+# --------------------
 # Sampling Rate Conversion
 # --------------------
   - |
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
index a970fd264b21..a48d040b0a4f 100644
--- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -17,6 +17,9 @@ properties:
           - const: snps,designware-i2s
       - enum:
           - snps,designware-i2s
+          - starfive,jh7110-i2stx0
+          - starfive,jh7110-i2stx1
+          - starfive,jh7110-i2srx
 
   reg:
     maxItems: 1
@@ -29,15 +32,36 @@ properties:
     maxItems: 1
 
   clocks:
-    description: Sampling rate reference clock
-    maxItems: 1
+    items:
+      - description: Sampling rate reference clock
+      - description: APB clock
+      - description: Audio master clock
+      - description: Inner audio master clock source
+      - description: External audio master clock source
+      - description: Bit clock
+      - description: Left/right channel clock
+      - description: External bit clock
+      - description: External left/right channel clock
+    minItems: 1
 
   clock-names:
-    const: i2sclk
+    items:
+      - const: i2sclk
+      - const: apb
+      - const: mclk
+      - const: mclk_inner
+      - const: mclk_ext
+      - const: bclk
+      - const: lrck
+      - const: bclk_ext
+      - const: lrck_ext
+    minItems: 1
 
   resets:
     items:
       - description: Optional controller resets
+      - description: controller reset of Sampling rate
+    minItems: 1
 
   dmas:
     items:
@@ -51,6 +75,17 @@ properties:
       - const: rx
     minItems: 1
 
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller sys_syscon node.
+          - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register.
+          - description: I2S-rx enabled control mask
+    description:
+      The phandle to System Register Controller syscon node and the I2S-rx(ADC)
+      enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register.
+
 allOf:
   - $ref: dai-common.yaml#
   - if:
@@ -66,6 +101,73 @@ allOf:
       properties:
         "#sound-dai-cells":
           const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: snps,designware-i2s
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+        resets:
+          maxItems: 1
+    else:
+      properties:
+        resets:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2stx0
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          minItems: 5
+          maxItems: 5
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2stx1
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          minItems: 9
+          maxItems: 9
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2srx
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          minItems: 9
+          maxItems: 9
+      required:
+        - resets
+        - starfive,syscon
+    else:
+      properties:
+        starfive,syscon: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
new file mode 100644
index 000000000000..3a941177f684
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sound-card-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Board Sound Card Common Properties
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+required:
+  - model
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
new file mode 100644
index 000000000000..329260cf0fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8904/WM8912 audio codecs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Pins on the device (for linking into audio routes):
+  IN1L, IN1R, IN2L, IN2R, IN3L, IN3R, HPOUTL, HPOUTR, LINEOUTL, LINEOUTR,
+  MICBIAS
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8904
+      - wlf,wm8912
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  AVDD-supply: true
+  CPVDD-supply: true
+  DBVDD-supply: true
+  DCVDD-supply: true
+  MICVDD-supply: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+  - MICVDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8904";
+            reg = <0x1a>;
+            clocks = <&pck0>;
+            clock-names = "mclk";
+            AVDD-supply = <&reg_1p8v>;
+            CPVDD-supply = <&reg_1p8v>;
+            DBVDD-supply = <&reg_1p8v>;
+            DCVDD-supply = <&reg_1p8v>;
+            MICVDD-supply = <&reg_1p8v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
index ee8eba7f0104..62e62c335d07 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
@@ -26,6 +26,21 @@ properties:
   '#sound-dai-cells':
     const: 0
 
+  AVDD-supply:
+    description: Analogue supply.
+
+  DBVDD-supply:
+    description: Digital Buffer Supply.
+
+  DCVDD-supply:
+    description: Digital Core Supply.
+
+  SPKVDD1-supply:
+    description: Supply for speaker drivers 1.
+
+  SPKVDD2-supply:
+    description: Supply for speaker drivers 2.
+
   wlf,capless:
     type: boolean
     description:
@@ -84,5 +99,10 @@ examples:
             wlf,hp-cfg = <3 2 3>;
             wlf,gpio-cfg = <1 3>;
             wlf,shared-lrclk;
+            DCVDD-supply = <&reg_audio>;
+            DBVDD-supply = <&reg_audio>;
+            AVDD-supply = <&reg_audio>;
+            SPKVDD1-supply = <&reg_audio>;
+            SPKVDD2-supply = <&reg_audio>;
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt
deleted file mode 100644
index 66bf261423b9..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8904.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-WM8904 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-  - compatible: "wlf,wm8904" or "wlf,wm8912"
-  - reg: the I2C address of the device.
-  - clock-names: "mclk"
-  - clocks: reference to
-    <Documentation/devicetree/bindings/clock/clock-bindings.txt>
-
-Pins on the device (for linking into audio routes):
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * MICBIAS
-
-Examples:
-
-codec: wm8904@1a {
-	compatible = "wlf,wm8904";
-	reg = <0x1a>;
-	clocks = <&pck0>;
-	clock-names = "mclk";
-};