Merge tag 'sound-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Again the diffstat shows a widely distributed pattern at this cycle,
  as there've been many code cleanups and refactoring allover the
  places. Other than that, the development was relatively calm, and no
  big surprise shouldn't be expected. Here are some highlights:

  Core:
   - Sequencer code refactoring / documentation updates
   - TLV code moved to uapi, following some relevant cleanups

  USB-Audio:
   - Lots of LINE6 driver fixes / updates
   - DragonFly and TEAC device quirk updates

  HD-audio:
   - Usual fixupes for Dell, Lenovo and HP machines
   - Link-audio time reporting capability

  ASoC:
   - Large refactoring of simple-card code to be shared with rcar driver
   - Removal of some duplicated ops over lots of CODEC drivers
   - Again quite a few Intel SKL driver updates
   - New drivers for Nuvoton NAU88C10, Realtek RT5660 and RT5663"

* tag 'sound-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (465 commits)
  ASoC: fsl: Fix lockups with recent cache changes
  ASoC: Intel: Skylake: fix memory leak of module on error exit path
  ASoC: rsnd: add SNDRV_PCM_TRIGGER_SUSPEND/RESUME
  ASoC: wm8960: remove usage of obsoleted TLV-related macro
  ASoC: rt5616: remove usage of obsoleted TLV-related macro
  ASoC: max9867: remove usage of obsoleted TLV-related macro
  ASoC: trivial: system spelling fix
  ASoC: da7219: fix inappropriate condition statement
  ASoC: tlv320aic31xx: do not declare support for mono DAI
  ASoC: stac9766: fix wrong usage of DECLARE_TLV_DB_LINEAR()
  ASoC: wm8991: remove unused variable
  ASoC: wm8991: fix wrong usage of DECLARE_TLV_DB_LINEAR()
  ASOC: tpa6130a2: add static qualifier for file local symbols
  ASoC: sst-bxt-rt298: fix obsoleted initializers for array
  ASoC: sst-bxt-da7219_max98357a: fix obsoleted initializers for array
  ASoC: rt5616: add static qualifier for file local symbols
  ASoC: arizona: Add output power up/down delays for speaker path
  ASoC: arizona: Add debug prints for output power up/down times
  ALSA: hda - Add the top speaker pin config for HP Spectre x360
  ASoC: Intel: Add DMIC channel constraint for bxt machine
  ...

13 files changed, 362 insertions, 114 deletions

diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt
new file mode 100644
index 000000000000..05830e477acd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nau8810.txt
@@ -0,0 +1,16 @@
+NAU8810 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8810"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8810@1a {
+	compatible = "nuvoton,nau8810";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
new file mode 100644
index 000000000000..5da7da4ea07a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
@@ -0,0 +1,42 @@
+NVIDIA Tegra audio complex, with SGTL5000 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-sgtl5000"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the SGTL5000's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphone Jack
+  * Line In Jack
+  * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the SGTL5000 audio codec.
+
+Example:
+
+sound {
+	compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+		     "nvidia,tegra-audio-sgtl5000";
+	nvidia,model = "Toradex Apalis T30";
+	nvidia,audio-routing =
+		"Headphone Jack", "HP_OUT",
+		"LINE_IN", "Line In Jack",
+		"MIC_IN", "Mic Jack";
+	nvidia,i2s-controller = <&tegra_i2s2>;
+	nvidia,audio-codec = <&sgtl5000>;
+	clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+		 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+		 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
index 48129368d4d9..d9d8635ff94c 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
@@ -16,6 +16,24 @@ Required properties:
 				* "spkr-iomux"
 - qcom,model		: Name of the sound card.
 
+- qcom,audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, MicBias
+			  of msm8x16_wcd codec and the jacks on the board:
+
+			  Power supplies:
+			  * MIC BIAS External1
+			  * MIC BIAS External2
+			  * MIC BIAS Internal1
+			  * MIC BIAS Internal2
+
+			  Board connectors:
+			  * Headset Mic
+			  * Secondary Mic",
+			  * DMIC
+			  * Ext Spk
+
 Dai-link subnode properties and subnodes:
 
 Required dai-link subnodes:
@@ -37,6 +55,18 @@ sound: sound {
 	reg-names = "mic-iomux", "spkr-iomux";
 	qcom,model = "DB410c";
 
+	qcom,audio-routing =
+		"MIC BIAS External1", "Handset Mic",
+		"MIC BIAS Internal2", "Headset Mic",
+		"MIC BIAS External1", "Secondary Mic",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1",
+		"DMIC1", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic1",
+		"DMIC2", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic2";
+
 	/* I2S - Internal codec */
 	internal-dai-link@0 {
 		cpu { /* PRIMARY */
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
deleted file mode 100644
index 255ece3043ad..000000000000
--- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Renesas Sampling Rate Convert Sound Card:
-
-Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC <-> codec.
-
-Required properties:
-
-- compatible				: "renesas,rsrc-card{,<board>}"
-					  Examples with boards are:
-					    - "renesas,rsrc-card"
-					    - "renesas,rsrc-card,lager"
-					    - "renesas,rsrc-card,koelsch"
-Optional properties:
-
-- card_name				: User specified audio sound card name, one string
-					  property.
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Optional subnode properties:
-
-- format				: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- frame-master				: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- bitclock-master			: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- bitclock-inversion			: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- frame-inversion			: bool property. Add this if the
-					  dai-link uses frame clock inversion.
-- convert-rate				: platform specified sampling rate convert
-- convert-channels			: platform specified converted channel size (2 - 8 ch)
-- audio-prefix				: see audio-routing
-- audio-routing				: A list of the connections between audio components.
-					  Each entry is a pair of strings, the first being the connection's sink,
-					  the second being the connection's source. Valid names for sources.
-					  use audio-prefix if some components is using same sink/sources naming.
-					  it can be used if compatible was "renesas,rsrc-card";
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai				: phandle and port of CPU/CODEC
-
-Optional CPU/CODEC subnodes properties:
-
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
-
-Example
-
-sound {
-	compatible = "renesas,rsrc-card,lager";
-
-	card-name = "rsnd-ak4643";
-	format = "left_j";
-	bitclock-master = <&sndcodec>;
-	frame-master = <&sndcodec>;
-
-	sndcpu: cpu {
-		sound-dai = <&rcar_sound>;
-	};
-
-	sndcodec: codec {
-		sound-dai = <&ak4643>;
-		system-clock-frequency = <11289600>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt
new file mode 100644
index 000000000000..eac91db07178
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt
@@ -0,0 +1,22 @@
+ROCKCHIP with MAX98357A/RT5514/DA7219 codecs on GRU boards
+
+Required properties:
+- compatible: "rockchip,rk3399-gru-sound"
+- rockchip,cpu: The phandle of the Rockchip I2S controller that's
+  connected to the codecs
+- rockchip,codec: The phandle of the MAX98357A/RT5514/DA7219 codecs
+
+Optional properties:
+- dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready.
+  If this option is specified, which means it's required dmic need
+  delay for DMIC to ready so that rt5514 can avoid recording before
+  DMIC send valid data
+
+Example:
+
+sound {
+	compatible = "rockchip,rk3399-gru-sound";
+	rockchip,cpu = <&i2s0>;
+	rockchip,codec = <&max98357a &rt5514 &da7219>;
+	dmic-wakeup-delay-ms = <20>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 5f79e7fde032..1766e0543fc5 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -12,6 +12,9 @@ Required properties:
 
 Optional properties:
 
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
 - realtek,in1-differential
 - realtek,in3-differential
 - realtek,in4-differential
diff --git a/Documentation/devicetree/bindings/sound/rt5660.txt b/Documentation/devicetree/bindings/sound/rt5660.txt
new file mode 100644
index 000000000000..30be5f921930
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5660.txt
@@ -0,0 +1,47 @@
+RT5660 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5660".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in3-differential
+  Boolean. Indicate MIC1/3 input are differential, rather than single-ended.
+
+- realtek,poweroff-in-suspend
+  Boolean. If the codec will be powered off in suspend, the resume should be
+  added delay time for waiting codec power ready.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO2 pin as dmic1 data pin
+  2: using IN1P pin as dmic1 data pin
+
+Pins on the device (for linking into audio routes) for RT5660:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN3P
+  * IN3N
+  * SPO
+  * LOUTL
+  * LOUTR
+
+Example:
+
+rt5660 {
+	compatible = "realtek,rt5660";
+	reg = <0x1c>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt
new file mode 100644
index 000000000000..7d3c974c6e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5663.txt
@@ -0,0 +1,30 @@
+RT5663/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5663" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+Pins on the device (for linking into audio routes) for RT5663/RT5668:
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * HPOL
+  * HPOR
+
+Example:
+
+codec: rt5663@12 {
+	compatible = "realtek,rt5663";
+	reg = <0x12>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index 59d862801e59..c7a93931fad2 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -22,6 +22,8 @@ Optional properties:
 					  headphones are attached.
 - simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
 					  a microphone is attached.
+- simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
+					  as amplifiers, to be added to the sound card.
 
 Optional subnodes:
 
@@ -162,3 +164,38 @@ sound {
 		};
 	};
 };
+
+Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
+through TPA6130A2 amplifier to headphones:
+
+&i2c0 {
+	codec: tlv320dac3100@18 {
+		compatible = "ti,tlv320dac3100";
+		...
+	}
+
+	amp: tpa6130a2@60 {
+		compatible = "ti,tpa6130a2";
+		...
+	}
+}
+
+sound {
+	compatible = "simple-audio-card";
+	...
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Headphone Jack", "HPLEFT",
+		"Headphone Jack", "HPRIGHT",
+		"LEFTIN", "HPL",
+		"RIGHTIN", "HPR";
+	simple-audio-card,aux-devs = <&amp>;
+	simple-audio-card,cpu {
+		sound-dai = <&ssi2>;
+	};
+	simple-audio-card,codec {
+		sound-dai = <&codec>;
+		clocks = ...
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
new file mode 100644
index 000000000000..d6fe47ed09af
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
@@ -0,0 +1,110 @@
+ASoC simple SCU Sound Card
+
+Simple-Card specifies audio DAI connections of SoC <-> codec.
+
+Required properties:
+
+- compatible				: "simple-scu-audio-card"
+					  "renesas,rsrc-card"
+
+Optional properties:
+
+- simple-audio-card,name		: User specified audio sound card name, one string
+					  property.
+- simple-audio-card,cpu			: CPU   sub-node
+- simple-audio-card,codec		: CODEC sub-node
+
+Optional subnode properties:
+
+- simple-audio-card,format		: CPU/CODEC common audio format.
+					  "i2s", "right_j", "left_j" , "dsp_a"
+					  "dsp_b", "ac97", "pdm", "msb", "lsb"
+- simple-audio-card,frame-master	: Indicates dai-link frame master.
+					  phandle to a cpu or codec subnode.
+- simple-audio-card,bitclock-master	: Indicates dai-link bit clock master.
+					  phandle to a cpu or codec subnode.
+- simple-audio-card,bitclock-inversion	: bool property. Add this if the
+					  dai-link uses bit clock inversion.
+- simple-audio-card,frame-inversion	: bool property. Add this if the
+					  dai-link uses frame clock inversion.
+- simple-audio-card,convert-rate	: platform specified sampling rate convert
+- simple-audio-card,convert-channels	: platform specified converted channel size (2 - 8 ch)
+- simple-audio-card,prefix		: see audio-routing
+- simple-audio-card,routing		: A list of the connections between audio components.
+					  Each entry is a pair of strings, the first being the connection's sink,
+					  the second being the connection's source. Valid names for sources.
+					  use audio-prefix if some components is using same sink/sources naming.
+					  it can be used if compatible was "renesas,rsrc-card";
+
+Required CPU/CODEC subnodes properties:
+
+- sound-dai				: phandle and port of CPU/CODEC
+
+Optional CPU/CODEC subnodes properties:
+
+- clocks / system-clock-frequency	: specify subnode's clock if needed.
+					  it can be specified via "clocks" if system has
+					  clock node (= common clock), or "system-clock-frequency"
+					  (if system doens't support common clock)
+					  If a clock is specified, it is
+					  enabled with clk_prepare_enable()
+					  in dai startup() and disabled with
+					  clk_disable_unprepare() in dai
+					  shutdown().
+
+Example 1. Sampling Rate Covert
+
+sound {
+	compatible = "simple-scu-audio-card";
+
+	simple-audio-card,name = "rsnd-ak4643";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&sndcodec>;
+	simple-audio-card,frame-master = <&sndcodec>;
+
+	simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */
+
+	simple-audio-card,prefix = "ak4642";
+	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+			"DAI0 Capture", "ak4642 Capture";
+
+	sndcpu: simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+
+	sndcodec: simple-audio-card,codec {
+		sound-dai = <&ak4643>;
+		system-clock-frequency = <11289600>;
+	};
+};
+
+Example 2. 2 CPU 1 Codec
+
+sound {
+	compatible = "renesas,rsrc-card";
+
+	card-name = "rsnd-ak4643";
+	format = "left_j";
+	bitclock-master = <&dpcmcpu>;
+	frame-master = <&dpcmcpu>;
+
+	convert-rate = <48000>;  /* see audio_clk_a */
+
+	audio-prefix = "ak4642";
+	audio-routing = "ak4642 Playback", "DAI0 Playback",
+			"ak4642 Playback", "DAI1 Playback";
+
+	dpcmcpu: cpu@0 {
+		sound-dai = <&rcar_sound 0>;
+	};
+
+	cpu@1 {
+		sound-dai = <&rcar_sound 1>;
+	};
+
+	codec {
+		sound-dai = <&ak4643>;
+		clocks = <&audio_clock>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 16bcdfb6760e..745dc62f76ea 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -11,7 +11,9 @@ Documentation/devicetree/bindings/sound/simple-card.txt.
 ---------------------------------------
 
 Required properties:
-  - compatible: "st,sti-uni-player" or "st,sti-uni-reader"
+  - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out",
+		"st,stih407-uni-player-dac", "st,stih407-uni-player-spdif",
+		"st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi",
 
   - st,syscfg: phandle to boot-device system configuration registers
 
@@ -33,32 +35,24 @@ Required properties:
 	"tx" for "st,sti-uni-player" compatibility
 	"rx" for "st,sti-uni-reader" compatibility
 
-  - st,version: IP version integrated in SOC.
-
-  - dai-name: DAI name that describes the IP.
-
-  - st,mode: IP working mode depending on associated codec.
-	"HDMI" connected to HDMI codec and support IEC HDMI formats (player only).
-	"SPDIF" connected to SPDIF codec and support SPDIF formats (player only).
-	"PCM" PCM standard mode for I2S or TDM bus.
-	"TDM" TDM mode for TDM bus.
-
 Required properties ("st,sti-uni-player" compatibility only):
   - clocks: CPU_DAI IP clock source, listed in the same order than the
 	    CPU_DAI properties.
 
-  - st,uniperiph-id: internal SOC IP instance ID.
-
 Optional properties:
   - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
 	       external codecs connection.
 
   - pinctrl-names: should contain only one value - "default".
 
+  - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs.
+	Only compartible with IPs in charge of the external I2S/TDM bus.
+	Should be declared depending on associated codec.
+
 Example:
 
-	sti_uni_player1: sti-uni-player@1 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player1: sti-uni-player@0x8D81000 {
+		compatible = "st,stih407-uni-player-hdmi";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -66,15 +60,12 @@ Example:
 		reg = <0x8D81000 0x158>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 3 0 1>;
-		st,dai-name = "Uni Player #1 (I2S)";
 		dma-names = "tx";
-		st,uniperiph-id = <1>;
-		st,version = <5>;
-		st,mode = "TDM";
+		st,tdm-mode = <1>;
 	};
 
-	sti_uni_player2: sti-uni-player@2 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player2: sti-uni-player@0x8D82000 {
+		compatible = "st,stih407-uni-player-pcm-out";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -82,15 +73,11 @@ Example:
 		reg = <0x8D82000 0x158>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 4 0 1>;
-		dai-name = "Uni Player #2 (DAC)";
 		dma-names = "tx";
-		st,uniperiph-id = <2>;
-		st,version = <5>;
-		st,mode = "PCM";
 	};
 
-	sti_uni_player3: sti-uni-player@3 {
-		compatible = "st,sti-uni-player";
+	sti_uni_player3: sti-uni-player@0x8D85000 {
+		compatible = "st,stih407-uni-player-spdif";
 		status = "okay";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -99,14 +86,10 @@ Example:
 		interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 7 0 1>;
 		dma-names = "tx";
-		dai-name = "Uni Player #3 (SPDIF)";
-		st,uniperiph-id = <3>;
-		st,version = <5>;
-		st,mode = "SPDIF";
 	};
 
-	sti_uni_reader1: sti-uni-reader@1 {
-		compatible = "st,sti-uni-reader";
+	sti_uni_reader1: sti-uni-reader@0x8D84000 {
+		compatible = "st,stih407-uni-reader-hdmi";
 		status = "disabled";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -114,9 +97,6 @@ Example:
 		interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
 		dmas = <&fdma0 6 0 1>;
 		dma-names = "rx";
-		dai-name = "Uni Reader #1 (HDMI RX)";
-		st,version = <3>;
-		st,mode = "PCM";
 	};
 
 2) sti-sas-codec: internal audio codec IPs driver
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 13503aa505a9..0230c4d20506 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -9,6 +9,7 @@ Required properties:
 
   - compatible		: should be one of the following:
     - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
+    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
 
   - reg			: Offset and length of the register set for the device.
 
@@ -25,6 +26,8 @@ Required properties:
 	"apb"		  clock for the spdif bus.
 	"spdif"		  clock for spdif controller.
 
+  - resets		: reset specifier for the ahb reset (A31 and newer only)
+
 Example:
 
 spdif: spdif@01c21000 {
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
index eff12be5e789..9340d2ddcc54 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -11,6 +11,7 @@ Required properties:
     "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
     "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
 
 - reg - <int> -  I2C slave address
 - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
@@ -37,9 +38,11 @@ CODEC output pins:
   * MICBIAS
 
 CODEC input pins:
-  * MIC1LP
-  * MIC1RP
-  * MIC1LM
+  * MIC1LP, devices with ADC
+  * MIC1RP, devices with ADC
+  * MIC1LM, devices with ADC
+  * AIN1, devices without ADC
+  * AIN2, devices without ADC
 
 The pins can be used in referring sound node's audio-routing property.