dt-bindings: Remove "status" from examples

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

35 files changed, 0 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
index 2fefa1a44afd..ab6ef085389a 100644
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ b/Documentation/devicetree/bindings/net/brcm,amac.txt
@@ -26,5 +26,4 @@ amac0: ethernet@18022000 {
 	      <0x18110000 0x1000>;
 	reg-names = "amac_base", "idm_base";
 	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
index 022946caa7e2..b46da51915c4 100644
--- a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
@@ -20,5 +20,4 @@ gmac0: ethernet@18022000 {
 	      <0x18110000 0x1000>;
 	reg-names = "gmac_base", "idm_base";
 	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 01fa2d4188d4..9c5e663fa1af 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -29,7 +29,6 @@ Example:
 Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 
 &usb_host1_ehci {
-    status = "okay";
     #address-cells = <1>;
     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e331777c203..78138333ff7a 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -56,7 +56,6 @@ m_can1: can@020e8000 {
 		 <&clks IMX6SX_CLK_CANFD>;
 	clock-names = "hclk", "cclk";
 	bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
-	status = "disabled";
 };
 
 Board dts:
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index 0ab8b39d0b30..fd23904ac68e 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -24,7 +24,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
                                              pinctrl-0 = <&pinctrl_spi_ksz>;
                                              cs-gpios = <&pioC 25 0>;
                                              id = <1>;
-                                             status = "okay";
 
                                              ksz9477: ksz9477@0 {
                                                              compatible = "microchip,ksz9477";
@@ -34,7 +33,6 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
                                                              spi-cpha;
                                                              spi-cpol;
 
-                                                             status = "okay";
                                                              ports {
                                                                              #address-cells = <1>;
                                                                              #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 04f2965a4467..4448d063ddf6 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -27,7 +27,6 @@ Example:
 I2C managed mode:
 
 	master: masterdevice@X {
-		status = "okay";
 
 		fixed-link { /* RMII fixed link to LAN9303 */
 			speed = <100>;
@@ -38,7 +37,6 @@ I2C managed mode:
 	switch: switch@a {
 		compatible = "smsc,lan9303-i2c";
 		reg = <0xa>;
-		status = "okay";
 		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 		reset-duration = <200>;
 
@@ -67,7 +65,6 @@ I2C managed mode:
 MDIO managed mode:
 
 	master: masterdevice@X {
-		status = "okay";
 		phy-handle = <&switch>;
 
 		mdio {
diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index c1ce1680246f..72e7aaf7242e 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -30,6 +30,5 @@ Example:
 		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
 		reg = <0x1e660000 0x180>;
 		interrupts = <2>;
-		status = "okay";
 		use-ncsi;
 	};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index ae4234ca4ee4..bedcfd5a52cd 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -41,7 +41,6 @@ ethernet@70000 {
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
 	tx-csum-limit = <9800>
-	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
 	buffer-manager = <&bm>;
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
index 9be1059ff03f..3d27c68613a6 100644
--- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
@@ -44,7 +44,6 @@ Example for SDIO device follows (calibration data is also available in
 below example).
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	bus-width = <4>;
 	cap-power-off-card;
@@ -70,7 +69,6 @@ below example).
 Example for USB device:
 
 &usb_host1_ohci {
-    status = "okay";
     #address-cells = <1>;
     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
index c1b1d7c3bde1..07b31050dbe5 100644
--- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
@@ -31,7 +31,6 @@ bm: bm@c8000 {
 	reg = <0xc8000 0xac>;
 	clocks = <&gateclk 13>;
 	internal-mem = <&bm_bppi>;
-	status = "okay";
 	pool2,capacity = <4096>;
 	pool1,pkt-size = <512>;
 };
@@ -45,5 +44,4 @@ bm_bppi: bm-bppi {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	clocks = <&gateclk 13>;
-	status = "okay";
 };
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index 6b4956beff8c..f85a62ca9edd 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -52,12 +52,10 @@ ethernet@f0000 {
 	      <0xc5000 0x100>;
 	clocks = <&gateclk 3>, <&gateclk 19>;
 	clock-names = "pp_clk", "gop_clk";
-	status = "okay";
 
 	eth0: eth0@c4000 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		port-id = <0>;
-		status = "okay";
 		phy = <&phy0>;
 		phy-mode = "gmii";
 	};
@@ -65,7 +63,6 @@ ethernet@f0000 {
 	eth1: eth1@c5000 {
 		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		port-id = <1>;
-		status = "okay";
 		phy = <&phy3>;
 		phy-mode = "gmii";
 	};
diff --git a/Documentation/devicetree/bindings/net/meson-dwmac.txt b/Documentation/devicetree/bindings/net/meson-dwmac.txt
index 0703ad3f3c1e..354dd9896bb5 100644
--- a/Documentation/devicetree/bindings/net/meson-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/meson-dwmac.txt
@@ -66,5 +66,4 @@ Example for GXBB:
 				<&clkc CLKID_MPLL2>;
 		clock-names = "stmmaceth", "clkin0", "clkin1";
 		phy-mode = "rgmii";
-		status = "disabled";
 	};
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index c35b5b428a7f..42a248301615 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -69,7 +69,6 @@ Examples:
 		};
 	};
 	ethernet@70000 {
-		status = "okay";
 		phy = <&phy0>;
 		phy-mode = "rgmii-id";
 	};
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
index 1dc3bc75539d..44dff53d4dda 100644
--- a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
@@ -33,7 +33,6 @@ Example (for NXP i.MX28 with pin control stuff for GPIO irq):
                 compatible = "fsl,imx28-spi";
                 pinctrl-names = "default";
                 pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>;
-                status = "okay";
 
                 enc28j60: ethernet@0 {
                         compatible = "microchip,enc28j60";
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
index 76df9173825a..c9b35251bb20 100644
--- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
@@ -25,7 +25,6 @@ Optional I2C-based chip specific properties:
 Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
 
 &uart5 {
-	status = "okay";
 
 	nfcmrvluart: nfcmrvluart@5 {
 		compatible = "marvell,nfc-uart";
@@ -41,7 +40,6 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
 Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
 
 &i2c1 {
-	status = "okay";
 	clock-frequency = <400000>;
 
 	nfcmrvli2c0: i2c@1 {
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index 5b6cd9b3f628..92486733df71 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	npc100: npc100@29 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
index 1aea822d4530..122460e42e3c 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
@@ -15,7 +15,6 @@ Example (for ARM-based BeagleBone with PN532 on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	pn532: pn532@24 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index dab69f36167c..538a86f7b2b0 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -17,7 +17,6 @@ Example (for ARM-based BeagleBone with PN544 on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	pn544: pn544@28 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
index fb1e75facf1b..ed5b3eaadb39 100644
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
@@ -12,7 +12,6 @@ Required properties:
 Example:
 
 &hsi2c_4 {
-	status = "okay";
 	s3fwrn5@27 {
 		compatible = "samsung,s3fwrn5-i2c";
 
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
index 263732e8879f..b46d473be425 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	st21nfcb: st21nfcb@8 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
index 711ca85a363d..54ce8e7ac681 100644
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
@@ -19,7 +19,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
 
 &mcspi4 {
 
-	status = "okay";
 
 	st21nfcb: st21nfcb@0 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index 7bb2e213d6f9..5ee9440fa9ad 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -20,7 +20,6 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
 &i2c2 {
 
-	status = "okay";
 
 	st21nfca: st21nfca@1 {
 
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
index ea3178bc9ddd..08a202e00d47 100644
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
@@ -35,12 +35,10 @@ spi@9840000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	cs-gpios = <&pio0 4>;
-	status = "okay";
 
 	st95hf@0{
 		reg = <0>;
 		compatible = "st,st95hf";
-		status = "okay";
 		spi-max-frequency = <1000000>;
 		enable-gpio = <&pio4 0>;
 		interrupt-parent = <&pio0>;
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 60c833d62181..5ca9362ef127 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -23,7 +23,6 @@ Optional SoC Specific Properties:
 Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 
 &spi1 {
-	status = "okay";
 
 	nfc@0 {
 		compatible = "ti,trf7970a";
@@ -41,6 +40,5 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		irq-status-read-quirk;
 		en2-rf-quirk;
 		clock-frequency = <27120000>;
-		status = "okay";
 	};
 };
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
index df0534e2eda1..d7117a22fd87 100644
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
@@ -35,5 +35,4 @@ etha: ethernet@40400000 {
 	/* Regmap for sys registers */
 	oxsemi,sys-ctrl = <&sys>;
 
-	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
index 6d9efb2eb9a5..3987846b3fd3 100644
--- a/Documentation/devicetree/bindings/net/qca,qca7000.txt
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -41,7 +41,6 @@ ssp2: spi@80014000 {
 	compatible = "fsl,imx28-spi";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
 
 	qca7000: ethernet@0 {
 		compatible = "qca,qca7000";
@@ -78,7 +77,6 @@ auart0: serial@8006a000 {
 	reg = <0x8006a000 0x2000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&auart0_2pins_a>;
-	status = "okay";
 
 	qca7000: ethernet {
 		compatible = "qca,qca7000";
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 8f427550720a..f4766855483e 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -70,5 +70,4 @@ gmac: ethernet@ff290000 {
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
 
-	status = "ok";
 };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
index 974edd5c85cc..8b7c719b0bb9 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -15,7 +15,6 @@ smsc phy with disabled energy detect mode on an am335x based board.
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethernetphy0: ethernet-phy@0 {
 		reg = <0>;
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
index 2e68a3cd8513..b30d04b54ee9 100644
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -40,7 +40,6 @@ gmii_to_sgmii_converter: phy@0x100000240 {
 gmac0: ethernet@ff700000 {
 	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-	status = "disabled";
 	reg = <0xff700000 0x2000>;
 	interrupts = <0 115 4>;
 	interrupt-names = "macirq";
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index d05c1e1fd9b6..062c5174add3 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -34,7 +34,6 @@ Example:
 
 ethernet0: dwmac@9630000 {
 	device_type = "network";
-	status = "disabled";
 	compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
 	reg = <0x9630000 0x8000>;
 	reg-names = "stmmaceth";
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index c35afb7e956a..489dbcb66c5a 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -18,7 +18,6 @@ Example:
 
 	ethernet@40028000 {
 		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-		status = "disabled";
 		reg = <0x40028000 0x8000>;
 		reg-names = "stmmaceth";
 		interrupts = <0 61 0>, <0 62 0>;
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
index 590f622188de..b2bd4704f859 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -29,7 +29,6 @@ mmc3: mmc@01c12000 {
 	vmmc-supply = <&reg_vmmc3>;
 	bus-width = <4>;
 	non-removable;
-	status = "okay";
 
 	brcmf: wifi@1 {
 		reg = <1>;
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
index 19331bb4ff6e..6830c4786f8a 100644
--- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
+++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
@@ -21,7 +21,6 @@ Example:
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
-	status = "okay";
 
 	esp8089: sdio_wifi@1 {
 		compatible = "esp,esp8089";
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 0854451ff91d..59de8646862d 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -48,7 +48,6 @@ IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
 so that firmware can wakeup host using this device side pin.
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
index 7b2cbb14113e..f42f6b0f1bc7 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
@@ -31,7 +31,6 @@ clock, new bindings (for parsing the clock nodes) have to be added.
 Example:
 
 &mmc3 {
-	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	bus-width = <4>;
 	cap-power-off-card;