Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78a9bf ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...

1 files changed, 111 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc
new file mode 100644
index 000000000000..b65674da43bb
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rc
@@ -0,0 +1,111 @@
+What:		/sys/class/rc/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		The rc/ class sub-directory belongs to the Remote Controller
+		core and provides a sysfs interface for configuring infrared
+		remote controller receivers.
+
+What:		/sys/class/rc/rcN/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		A /sys/class/rc/rcN directory is created for each remote
+		control receiver device where N is the number of the receiver.
+
+What:		/sys/class/rc/rcN/protocols
+Date:		Jun 2010
+KernelVersion:	2.6.36
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Reading this file returns a list of available protocols,
+		something like:
+		    "rc5 [rc6] nec jvc [sony]"
+		Enabled protocols are shown in [] brackets.
+		Writing "+proto" will add a protocol to the list of enabled
+		protocols.
+		Writing "-proto" will remove a protocol from the list of enabled
+		protocols.
+		Writing "proto" will enable only "proto".
+		Writing "none" will disable all protocols.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used.
+
+What:		/sys/class/rc/rcN/filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode filter expected value.
+		Use in combination with /sys/class/rc/rcN/filter_mask to set the
+		expected value of the bits set in the filter mask.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/filter to set the bits
+		of the scancode which should be compared against the expected
+		value. A value of 0 disables the filter to allow all valid
+		scancodes to be processed.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_protocols
+Date:		Feb 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Reading this file returns a list of available protocols to use
+		for the wakeup filter, something like:
+		    "rc5 rc6 nec jvc [sony]"
+		The enabled wakeup protocol is shown in [] brackets.
+		Writing "+proto" will add a protocol to the list of enabled
+		wakeup protocols.
+		Writing "-proto" will remove a protocol from the list of enabled
+		wakeup protocols.
+		Writing "proto" will use "proto" for wakeup events.
+		Writing "none" will disable wakeup.
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used, or if wakeup is not supported by
+		the hardware.
+
+What:		/sys/class/rc/rcN/wakeup_filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode wakeup filter expected value.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
+		set the expected value of the bits set in the wakeup filter mask
+		to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.
+
+What:		/sys/class/rc/rcN/wakeup_filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
+Description:
+		Sets the scancode wakeup filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/wakeup_filter to set
+		the bits of the scancode which should be compared against the
+		expected value to trigger a system wake event.
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+		Otherwise the write will fail with an error.
+		This value may be reset to 0 if the wakeup protocol is altered.